Error occurred while determining attribute (CRM - PME)"" Message no. COM_

Hi
I am getting the following the following Error while creating Technical Master Data i.e. Connection Objects from CRM UI.
"u201CError occurred while determining attribute (CRM <-> PME)u201D" Message no. COM_PRCAT111
We are not using any concept of Configurable products in our system .Is there any way to disbale PME check from CRM so that it does not hits PME and try to search for attribute values .
Thanks
Zing

Hi all,
In rare cases, the system may generate the attributes, which were
delivered by SAP, for the set types again. As a result, the table CO
MC_SETTYPE_ATTR contains duplicate entries. These trigger the error
message mentioned above.
Solution is to delete the duplicate entries.
Solution is to run report ECRM_ISU_CLEAR_DOUBLE_ENTRIES
SAP Note No. 561238 is useful for IS-U connection objects and PoDs
Regards
Ullas Saffarulla

Similar Messages

  • "Error occurred while determining attribute (CRM - PME)"

    Hi
    I am getting the following the following Error while creating Technical Master Data i.e. Connection Objects from CRM UI.
    "u201CError occurred while determining attribute (CRM <-> PME)u201D"  Message no. COM_PRCAT111
    We are not using any concept of Configurable products in our system .Is there any way to disbale PME check from CRM so that it does not hits PME and try to search for attribute values .
    Thanks
    Zing
    Moderation: Locked. Duplicated from[ this thread|Error occurred while determining attribute (CRM <-> PME)”" Message no. COM_]
    Edited by: Joaquin Fornas on Nov 17, 2011 8:48 AM

    Hi all,
    In rare cases, the system may generate the attributes, which were
    delivered by SAP, for the set types again. As a result, the table CO
    MC_SETTYPE_ATTR contains duplicate entries. These trigger the error
    message mentioned above.
    Solution is to delete the duplicate entries.
    Solution is to run report ECRM_ISU_CLEAR_DOUBLE_ENTRIES
    SAP Note No. 561238 is useful for IS-U connection objects and PoDs
    Regards
    Ullas Saffarulla

  • TELCO provider_ic: Error occurred while determining attribute (CRM - PME)

    Hi Gurus,
    I´m trying to implement CRM Telco Industry Solution.
    I tried to create a standard sales order (PRVO transaction type) using PROVIDER_IC Business Role(PRVO).
    But when I tried to create it I get the following error: "Error occurred while determining attribute (CRM <-> PME)"
    Can anybody help me in order to solve this?
    Thanks in advance.
    Marcelo.

    Hi all,
    In rare cases, the system may generate the attributes, which were
    delivered by SAP, for the set types again. As a result, the table CO
    MC_SETTYPE_ATTR contains duplicate entries. These trigger the error
    message mentioned above.
    Solution is to delete the duplicate entries.
    Solution is to run report ECRM_ISU_CLEAR_DOUBLE_ENTRIES
    SAP Note No. 561238 is useful for IS-U connection objects and PoDs
    Regards
    Ullas Saffarulla

  • OWA 2013 : An error occurred while signing this S/MIME message. No certificate was found.

    Hi,
    I've configured SMIME (certificate templates, signing/encryption certificate, etc.)
    All users receive their certificate, and in Outlook (2010) everything is working as expected.
    When I use the OWA 2013 however to send an encrypted message, I receive the error :
    "An error occurred while signing this S/MIME message. No certificate was found. If you have a smart card-based certificate, insert the card and try again."
    environment : exchange 2013 SP1, ie 9 and 10
    Get-SMIMEConfig
    [PS] D:\Scripts>Get-SmimeConfig
    RunspaceId                                       : 24178a41-aead-45fc-a4c2-5504b2541e7e
    OWACheckCRLOnSend                                : False
    OWADLExpansionTimeout                            : 60000
    OWAUseSecondaryProxiesWhenFindingCertificates    : True
    OWACRLConnectionTimeout                          : 60000
    OWACRLRetrievalTimeout                           : 10000
    OWADisableCRLCheck                               : False
    OWAAlwaysSign                                    : False
    OWAAlwaysEncrypt                                 : False
    OWAClearSign                                     : True
    OWAIncludeCertificateChainWithoutRootCertificate : False
    OWAIncludeCertificateChainAndRootCertificate     : True
    OWAEncryptTemporaryBuffers                       : True
    OWASignedEmailCertificateInclusion               : True
    OWABCCEncryptedEmailForking                      : 0
    OWAIncludeSMIMECapabilitiesInMessage             : False
    OWACopyRecipientHeaders                          : False
    OWAOnlyUseSmartCard                              : False
    OWATripleWrapSignedEncryptedMail                 : True
    OWAUseKeyIdentifier                              : False
    OWAEncryptionAlgorithms                          : 6610
    OWASigningAlgorithms                             : 8004
    OWAForceSMIMEClientUpgrade                       : True
    OWASenderCertificateAttributesToDisplay          :
    OWAAllowUserChoiceOfSigningCertificate           : False
    SMIMECertificateIssuingCA                        :
    SMIMECertificatesExpiryDate                      :
    SMIMEExpiredCertificateThumbprint                :
    AdminDisplayName                                 :
    ExchangeVersion                                  : 0.1 (8.0.535.0)
    Name                                             : Smime Configuration
    DistinguishedName                                : CN=Smime Configuration,CN=Global Settings,CN=customer,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=customer,DC=com
    Identity                                         : Smime Configuration
    Guid                                             : 1184683a-2fcd-446b-98a6-bf0fb16ca282
    ObjectCategory                                   : customer.com/Configuration/Schema/ms-Exch-Container
    ObjectClass                                      : {top, container, msExchContainer}
    WhenChanged                                      : 17/06/2014 14:21:52
    WhenCreated                                      : 17/06/2014 14:21:52
    WhenChangedUTC                                   : 17/06/2014 12:21:52
    WhenCreatedUTC                                   : 17/06/2014 12:21:52
    OrganizationId                                   :
    OriginatingServer                                : DC1.customer.COM
    IsValid                                          : True
    ObjectState                                      : Unchanged

    Have you set up a virtual certificate collection? Looks like that's new with Exchange 2013:
    http://technet.microsoft.com/en-us/library/dn626158(v=exchg.150).aspx
    http://technet.microsoft.com/en-us/library/dn626155(v=exchg.150).aspx
    Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • "An error occurred while attempting to change modules" message occurs whenever I try to run Lightroom. Can't use it. Can anyone give me any hint to solve the problem?

    I found a solution in one of Apple forums. I will copy her post:
    "

I was checking the differences between my normal admin User account/Library/Application Support/Adobe/Lightroom contents and the one on the clean other admin User folder in the same place on the G4 PB where Lightroom2 had launched normally and noticed that on the one that works there are a slew of folders (Develop Presets, Export Presets, External Editor Presets, Filename Templates, Filter Presets, etc etc). On the main admin account, there was only one, the first. So it seemed the install on that account didn't load all the needed info. I simply copied the missing folders from the account that worked into the Public folder, switched to my main account and added those missing folders in the proper place. Voilà!. Now Lightroom launches normally and I don't get the dreaded missing modules alert."
    The problem with me is that I do not have a working copy of Lightroom, just 1 account in which it doesn't run and don't know where to copy the missing folders from. Please send some advice.

    Surely the Adobe forums are the place for help with Adobe applications. The fact that the problem doesn't occur on your daughter's machine suggests that it's not an issue with Mavericks but a local problem on your own machine.

  • An error occured while creating the original attribute for message no26 296

    Hi All,
              I am new to DMS , we are trying to store PM documents on content server , created a storage category and while assigning files to storage category then on saving the document i get the below error :
    An error occured while creating the original attribute for
    Message no. 26 296
    Diagnosis
    An error occured while creating an original in the Knowledge Provider.
    System Response
    The original could not be created.
    Procedure
    Contact the systems administrator and check the log file (transaction Evaluate application log, object SDOK).
    Please let me know what configs i am missing ...
    Thanks in advance
    regrds
    pushpa

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • CRM Order: Error occurred during determination of profitability segment

    Hello All,
    I have created a Trade promotion in CRM, and maintained the determination condition and Discount condition for the combination of
    Customer /Sales org /Product.
    I have maintained settings for CO-PA in connected SAP ECC
    When i create a sales order in CRM , trade promotion is determined in the order and also discount is considered in the order pricing.
    When i save the order in CRM, an entry in the outbound queue of CRM is created with destination pointing to ECC, which is having the status: SYSFAIL.
    The description of the error is :" Error occurred during determination of profitability segment "
    Suppose when if i remove the trade promotion which was determined in the order and then save the order i dont get this error.
    Hence could you please help me providing additional settings which should be done if we want to have TPM also.
    Regards,
    Naveen

    Long Text message
    An error has occured in the system ECPCLNT100 while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.
    Transmission log
    Error occurred during determination of profitability segment (Notification E IAOM 025)
    Error occurred in derivation rule. See long text (Notification E K/ 111)
    I pressed F8 to see the derivation strategy , but how do i figure out which characteristic/char value is missing / has the error.
    Best Regards
    Meghna

  • Error occurred while creating dimension attributes.

    Hi All,
             I have restored the back up file in the NW 10.0 environment (In BW 7.3 system using UJBR tcode the backup file was colleted from NW 7.5 system). In this process I have got an error "Error occurred while creating the dimension attributes via Admin API" and I have tried to resolve this with the program execution "UJA_ASSIGN_INFOOBJECTS_CATALOG". I am not able to open the Environment after this restore process completion. Could you guide me in this to resolve the issue. Please Let me know if you need more information to understand the issue.
    Thanks and Regards,
    Krishan.

    Hi Nilanjan,
                      I have logged into the BPC system and able to open the APSHELLENVIRONMENTSHELL. When I tried to open a new environment which I have restored in the BW system error like "500-server ". Is this related to Service Pack ? or need to apply any new one to this system. And one more log I have observed in the process of DATA. When I have executed the UJA_DATA_CHECKER there is a message what I have got in this process " InfoObject catalog /CPMB/ENVIRONMENTSHELL_CHAR is not available in version A".
    BW System Details:
                                   SAPK-80102INCPMBPC
    Thanks and Regards,
    Krishna.

  • An error occured while creating the original attribute....

    Hello Gurus,
    I am getting an error message when I try to save a document using CV01N. It says:
    "An Error occured while creating the original attribute for XXX"
    Can someone please help me here ?
    Regards,
    Rajesh.

    We get the same error message sometimes but then the documnet already is created. Trouble then is that s an inconsistence in the KPRO.
    There is an incomplete/orphaned LOIO (logical object identifier), incomplete means that there is no original associated to it.
    Don't know why this happens but we fix by doing following.
    I run transaction SE38 and execute program DMS_KPRO_CHECK1
    In bottom of the result list there is a section called: Loios in DMS without reference to KPRO.  These documents have a LOIO but no original.
    This can be checked running transaction SE38 and execute program DMS_KPRO_READ.
    When the document is checked in DMS_KPRO_READ I go back to DMS_KPRO_CHECK1, and delete the LOIO.
    The inconsistency will then be cleared.
    Hope this can be of any help for you.
    Regards
    Daniel

  • An error occured while creating the original attribute for

    Hi All,
    We encounter  this error in  "An error occured while creating the original attribute for " DMS  very often when a user edits a file & tries to check in.
    I searched the forums & realized that this is caused by the inconsistencies in the KPRO & DMS server and removing these
    inconsistencies will repair this issue.
    I have been deleting the inconsistencies using DMS reports DMS_KPRO_READ & DMS_KPRO_CHECK1 and it resolves the error
    so the file is unlocked. But I haven't been able to figure out the ROOT cause of this issue.I couldn't find any information on the root cause of this issue. What can be done to fix this error permanently.
    Regards
    -Neha

    Hi Neha,
    Please go to transaction SE16 and enter 'SDOKPROP' as table. Then enter 'DMS*' in the field PROP_NAME and press F8. Now all DMS related entries should be displayed to you. Please compare them with the following entries displayed in the attached screenshot and maintain the missing entries.
    DMS_ACTIVE_VERSION 00 Active Version
    DMS_APPLICATION 00 Logical application
    DMS_CHECKOUT_USER 00 Checkout User
    DMS_CREATE_AUDIT 00 Generate new version of the original
    DMS_DEFAULT_LANGUAGE 00 Default Language
    DMS_DELETEABLE 00 PHIO deletable
    DMS_DOC_KEY 02 IWB_DMS01 DMS_DOCKEY Document info record
    DMS_DOC_VERSION 00 Version of relevant document
    DMS_DRAW_APPNR 00 Application number from DRAW
    DMS_DRAW_DTTRG 00 Data carrier from DRAW
    DMS_DRAW_FILEP 00 File name from DRAW
    DMS_FILE1 00 File name(firstpart)
    DMS_FILE2 00 File name(secondpart)
    DMS_FILE3 00 File name(thirdpart)
    DMS_FILE_ID 00 GUID that points to table DMS_PHIO2FILE
    DMS_FRMTXT 00 Format description, ID of additional file
    DMS_MUP_CAT 00 Markup category
    DMS_MUP_FLAG 00 Markup flag
    DMS_ORDER 00 Sequence of additional files
    DMS_STATUS 00 Document status
    DMS_STATUSNR 00 Number in status protocol
    DMS_STATUSNR_X 00 References to Status Log
    Please pay attention that all entries are typed well and that there are no spelling errors. If all these values are maintained correctly in table SDOKPROP the dump and the error message should no longer appear.
    For further information you can also see the corresponding SDN WIKI page under
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/plm/error26296in+CV01N
    Regards,
    Ravindra

  • I'm having problems with a message that says: An error occurred while Attempting to create the directory: C:/program files/itunes/cd configuarion

    I know this is a long story, but I'll be damned if I'm not going to get the most specific help I can (as Apple seems to specialize in assuming user error for all its demonic software). I've never had issues with iTunes before (barring a "Connect to iTunes" snafu with my iPod Touch) -- and never, in fact, with Windows Vista, if you believe that -- but this is the most bizarre thing I've seen.
    I recently downloaded the new iTunes v 9.0.3 as I am occasionally prompted to do whenever a new version comes out, and immediately I had problems. Access to the iTunes and Quicktime folders was mysteriously denied after the update, and after several hours of frustration, I was able to grant my own Administrative access to these two folders and installation went through. Thank God.
    Then I bought some music. No problems -- downloaded just fine, along with a copy of Cinderella Man and the new episode of Smallville. Life was good for a few days.
    Then I connected my iPod Touch to the computer. All of a sudden, Microsoft Windows informs me that the "Apple Mobile Device Service stopped working and was closed," with subtext, "A problem caused the application to stop working correctly. Windows will notify you if a solution is available."
    Bullsh*t Windows can help me with anything from Apple.
    So I've tried to get iTunes to work with me on this. I've come up against the infamous "iTunes could not connect to this iPhone because an unknown error occurred (OxE8000001)" message. My God, when does it ever end?
    So I go into Control Panel > Administrative Tools > Services > Apple Mobile Device and start it back up... only to watch it stop again inexplicably moments later. Hmm... Restart. Stays on. Unplug the iPod and plug it back in. Apple Mobile Device Service stops again. Maybe it's the iPod Service itself. Hey, that one's not started! [Start] "Windows could not start the iPod Service service on Local Computer -- Error 5: Access is denied."
    What the f*ck is it with this "Access denied" crap? I've never been denied access to even the most intimate functions, files and folders on my freaking computer before! What has Apple created!?
    I thought, perhaps Apple Mobile Device software was somehow removed. Okay, let's redownload iTunes (aka Repair the program from the Programs and Features menu in the Control Panel -- same thing). Huh. "An error occurred while attempting to create directory C:\Program Files\iTunes\CD Configuration," and I can choose to Retry or Cancel. So, instinctively, I deleted the CD Configuration folder, assuming iTunes Setup would just recreate it.
    Well, that didn't work now, did it? I deleted it and hit Retry, and it said, "The installer has insufficient priveleges to access the directory: C:\Program Files\iTunes\CD Configuration. Log on as administrator or contact your system administrator." Running the .exe file as an adminstrator changes NOTHING about this predicament.
    So that's where it stands. No CD Configuration folder; full access to all files and folders involved; Apple Mobile Device Service still keeps going off for no reason; iPod Service still doesn't run; Repairing/Reinstalling iTunes, Quicktime, Bonjour, etc. does nothing; and God (aka Steve Jobs, apparently) hates me.
    . . . . . . . . . . . . Help me.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    -Griff W.

  • Cannot delete itunes from pc,message states. a network error occurred while attempting to read from the file C:\windows\installer\itunes.msi

    ITUNES WILL NOT DELETE FROM ADD @ REMOVE PROGRAMS,
    MESSAGE, READS  a network error occured while attempting to read from the file  C:WINDOWS\installer\iTunes.msi

    All sorted now just needed to repair itunes from control panel

  • I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data

    I get error message iTunes could not sync calendars to iPhone because an error occurred while merging data on my wifes phone how do you correct problem without losing calendars info on phone.

    One thing that might help.
    1. open itunes preferences from the edit menu and click on the devices tab.
    2. check the box to disable syncing for iphones connected to itunes and click ok.
    3. Then click the button to reset sync history.
    4. Now click ok to close the preferences window.
    5. connect the iphone to itunes and go to the info tab.
    6. scroll to the bottom of the info page and check the box to replace the ical data on the iphone.
    7. then click apply on the bottom right of itunes.
    This will overwrite any events on the iphone, including any events that has become corrupted.
    Hope this helps

  • My Time Capsule has stopped backing up.  I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message: "The backup was not performed because an error occurred while copying files to the backup disk.

    My Time Capsule has stopped backing up.
    I have an Apple Time Capsule which backs up by wireless. For the last 3 days it has not backed up. I get this message:
    "The backup was not performed because an error occurred while copying files to the backup disk."
    I have gone into Mac Help and followed this down to stage 4:
    under shared it lists my time capsule and my husband's iMac - both use the time machine but we have switched his off temporarily.  Clicking on my Time capsule I get "Connected" and "Sharepoint" - I didn't have to enter connect or password
    I don't understand stage 5: how and where do I select the disk or volume that contains Time Machine backups ?  How do I know which it is? My disk utility lists 160.04 TOSHIBA MK... with sub-heading Macintosh HD.  It also lists (with a "CD" icon) HL-DT-ST DVDRW GS22N
    Under stage 6, how and where do I Locate your backup ? I try dragging my Time capsule from Finder to the Disk Utility side panel but it won't go.  What is my computer's name?
    Please someone help!  I'm completely stumped.
    Thanks,
    Maggie
    Mac Help says:
    If you back up to a Time Capsule or network disk:
    Open the Time Machine pane of System Preferences, and slide the switch to Off.
    Open Time Machine preferences
    Open Disk Utility, which is in the Utilities folder in the Applications folder. 
    Open Disk Utility
    Make sure the Time Capsule or network disk is turned on and available. 
    Open a Finder window, select your Time Capsule or network disk in the Shared section of the sidebar, and click Connect. If necessary, enter your user name and password. 
    On the Time Capsule or network disk, select the disk or volume that contains Time Machine backups. Depending on how your Time Capsule is set up, there may be one or more disks or volumes. 
    Locate your backup, and drag it to the Disk Utility sidebar.You can identify your backup by looking for your computer’s name in the backup’s filename.

    Hello,
    Thanks to the great Pondini...
    http://pondini.org/TM/C3.html

  • When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

    When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

    Hi Centreless,
    If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Best,
    Brett L

Maybe you are looking for

  • Problem in transformation

    Hi Gurus I am working on BI 7.0 and when I create transformation I have the following message. R<b>ule 5 (target: Z_REV): Target parameter 0008 is not being used</b> <b>Rule (target field: Z_REV): No source field assigned</b> <b>Rule 7 (target: Z_MPR

  • SAP HA ASCS Instance service Shared Memory Problem

    Hi Gurus, I have completed the setup of ASCS and ERS instance for SAP HA.  The system was working fine, but yesterday when I was trying to start the ASCS instance, it shows following error in the dev_enqsrv log file. ShadowTable:attach: ShmCreate - p

  • When you buy a buy at the itunes store do you get access to closed caption on like a DVD

    I would like to know if the movies you purchase from the Itunes store allows you to have closed caption.  We have purchased a lot of amazon but the closed caption is not an option there and we would love to switch over to Itunes for movies.

  • Ztables or  custom tables

    hi to all abap gurus my querry os as follows have u ever created ztables so far . if so pls tell some situtations (scneraios) where u have created z tables . it is one of the interview question asked ? pls tel, in deatail . points will be rewred for

  • Displaying the report output in excel format

    Please help me in getting the report output in excel format. thnks