Error on export from Flash CC to Javascript/HTML5
I am trying to convert a Flash CC project to HTML5. I continually get this error:
An unexpected error occurred during export. [NOSYMB (innerWheel)]
innerWheel is a movieClip that contains 784 frames of frame by frame animation. The elements that animate are the small letters (text saved as movieClips) and background to the small letters. See below - capital letters stay fixed in place.
I can't find any information on what NOSYMB means. Has anyone else had the same problem?
When I query the instance:
console.log(this.innerWheel.visible);
I get this message in the console (Safari):
[Error] TypeError: undefined is not an object (evaluating 'this.innerWheel.visible')
Any help is much appreciated. I'm tearing my hair out.
I isolated the problem to a particular range of frames, removed those and rebuilt the animation. I can now publish with no errors.
Still no idea what exactly was causing the error. When I inspected each instance on the stage they looked fine. But at least I'm not getting an error so all good.
Would still be great to know what NOSYMB refers to though.
Similar Messages
-
I have worked with InDesign quite a lot, and now I'd like to make an eBook using the software. I don't know much about Adobe Flash, just starting to learn, and I'd like to know if there is a file format exported from Flash that can be used in an epub format document made with InDesign?
(I'm not sure if I gave the right definition of things but I hope you'll undersand.)
Thanks in advance,
BibiHi Bibi,
the quick answer is no. You can place swf in InDesign and that will be honored during a interactive PDF-Output, but not with EPUB. If you try to get some animations to EPUB, you must use HTML5, CSS3 and Javascript. This can be done in InDesign CC with the help of Adobe Edge Animate.
But note: There is only a minor support for this feature for different devices. -
Mac Projector Crashes When exported From Flash CS5.5
Something strange that i noticed, when i had exported a presentation for a Mac,
on a 64 bit windows 7 using flash cs5.5.
the applicaton gets the paths of a few swfs from an XML file
and loads them one after the other.. there is a small bit of interactivity.
.. tested this projecter on various versions of MAC, it crashes often,crashes earlier if i switch applications. what follows here is a part of a report that was generated on an OS X 10.7.3,
works fine if the projector is exported from flash cs5.
i need it to work when exported from flash cs5.5.. any suggestions on what i need to change in my application so that it works when exported from flash cs5.5?
Your help would be appreciated Thanks in Advance
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000500d98eb
VM Regions Near 0x500d98eb:
Memory tag=240 000000000ebd0000-000000000ec90000 [ 768K] ---/rwx SM=NUL
-->
__TEXT 0000000070000000-0000000070142000 [ 1288K] r-x/rwx SM=COW /System/Library/Components/CoreAudio.component/Contents/MacOS/CoreAudio
Application Specific Information:
objc_msgSend() selector name: orderOut:
objc[9434]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libobjc.A.dylib 0x92115d47 objc_msgSend + 23
1 com.macromedia.Flash Player.app 0x00467d96 main + 240950
2 com.macromedia.Flash Player.app 0x0047efda main + 335738
3 com.macromedia.Flash Player.app 0x002feae2 0x1000 + 3136226
4 com.macromedia.Flash Player.app 0x0033a77b 0x1000 + 3381115
5 com.macromedia.Flash Player.app 0x00462718 main + 218808
6 com.macromedia.Flash Player.app 0x004628b2 main + 219218
7 com.apple.CoreFoundation 0x98e0b3df __CFRUNLOOP_IS_CALLING_OUT_TO_A_SOURCE0_PERFORM_FUNCTION__ + 15
8 com.apple.CoreFoundation 0x98e0ad96 __CFRunLoopDoSources0 + 246
9 com.apple.CoreFoundation 0x98e34c68 __CFRunLoopRun + 1112
10 com.apple.CoreFoundation 0x98e3447c CFRunLoopRunSpecific + 332
11 com.apple.CoreFoundation 0x98e34328 CFRunLoopRunInMode + 120
12 com.apple.HIToolbox 0x9289117f RunCurrentEventLoopInMode + 318
13 com.apple.HIToolbox 0x928984e7 ReceiveNextEventCommon + 381
14 com.apple.HIToolbox 0x92898356 BlockUntilNextEventMatchingListInMode + 88
15 com.apple.AppKit 0x98fe8a9c _DPSNextEvent + 678
16 com.apple.AppKit 0x98fe8306 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 113
17 com.apple.AppKit 0x98fe4675 -[NSApplication run] + 911
18 com.apple.AppKit 0x99278261 NSApplicationMain + 1054
19 com.macromedia.Flash Player.app 0x000032a2 0x1000 + 8866
20 com.macromedia.Flash Player.app 0x000031c9 0x1000 + 8649
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x97d3f90a kevent + 10
1 libdispatch.dylib 0x99a75c58 _dispatch_mgr_invoke + 969
2 libdispatch.dylib 0x99a746a7 _dispatch_mgr_thread + 53
Thread 2:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9232482a pthread_cond_wait + 48
3 com.macromedia.Flash Player.app 0x003ff62f 0x1000 + 4187695
4 com.macromedia.Flash Player.app 0x0001a06c 0x1000 + 102508
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 3:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9232482a pthread_cond_wait + 48
3 com.macromedia.Flash Player.app 0x003ff62f 0x1000 + 4187695
4 com.macromedia.Flash Player.app 0x0001a06c 0x1000 + 102508
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 4:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9237cf7b pthread_cond_timedwait_relative_np + 47
3 com.macromedia.Flash Player.app 0x003ff5f8 0x1000 + 4187640
4 com.macromedia.Flash Player.app 0x001c58fe 0x1000 + 1853694
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 5:
0 libsystem_kernel.dylib 0x97d3e83e __psynch_cvwait + 10
1 libsystem_c.dylib 0x9237ce78 _pthread_cond_wait + 914
2 libsystem_c.dylib 0x9237cf7b pthread_cond_timedwait_relative_np + 47
3 com.macromedia.Flash Player.app 0x003ff5f8 0x1000 + 4187640
4 com.macromedia.Flash Player.app 0x00305328 0x1000 + 3162920
5 com.macromedia.Flash Player.app 0x003ff70c 0x1000 + 4187916
6 com.macromedia.Flash Player.app 0x003ff73a 0x1000 + 4187962
7 com.macromedia.Flash Player.app 0x003ff847 0x1000 + 4188231
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 6:: com.apple.audio.IOThread.client
0 libsystem_kernel.dylib 0x97d3cc22 mach_msg_trap + 10
1 libsystem_kernel.dylib 0x97d3c1f6 mach_msg + 70
2 com.apple.audio.CoreAudio 0x9cd8e9fe HALB_MachPort::SendMessageWithReply(unsigned int, unsigned int, unsigned long, unsigned long, mach_msg_header_t*, unsigned int) + 122
3 com.apple.audio.CoreAudio 0x9cd8ea6a HALB_MachPort::SendSimpleMessageWithSimpleReply(unsigned int, unsigned int, int, int&, unsigned int) + 60
4 com.apple.audio.CoreAudio 0x9cd86e5f HALC_ProxyIOContext::IOWorkLoop() + 1145
5 com.apple.audio.CoreAudio 0x9cd86926 HALC_ProxyIOContext::IOThreadEntry(void*) + 136
6 com.apple.audio.CoreAudio 0x9cd86898 __HALC_ProxyIOContext_block_invoke_6 + 20
7 com.apple.audio.CoreAudio 0x9cd8681d HALB_IOThread::Entry(void*) + 69
8 libsystem_c.dylib 0x92378ed9 _pthread_start + 335
9 libsystem_c.dylib 0x9237c6de thread_start + 34
Thread 7:
0 libsystem_kernel.dylib 0x97d3f02e __workq_kernreturn + 10
1 libsystem_c.dylib 0x9237accf _pthread_wqthread + 773
2 libsystem_c.dylib 0x9237c6fe start_wqthread + 30
Thread 8:
0 libsystem_kernel.dylib 0x97d3f02e __workq_kernreturn + 10
1 libsystem_c.dylib 0x9237accf _pthread_wqthread + 773
2 libsystem_c.dylib 0x9237c6fe start_wqthread + 30
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00dbe0e0 ebx: 0x00dbe0e0 ecx: 0x99985548 edx: 0x500d98cb
edi: 0x0000036e esi: 0x00aad0e0 ebp: 0xbfffe4f8 esp: 0xbfffe488
ss: 0x00000023 efl: 0x00010202 eip: 0x92115d47 cs: 0x0000001b
ds: 0x00000023 es: 0x00000023 fs: 0x00000000 gs: 0x0000000f
cr2: 0x500d98eb
Logical CPU: 1Looks like it was a memory problem with the jvm.ini file.
Pumped it up to 256 and it works now.
Hope this helps anyone else in the future if they come across it.
Thanks. -
Simple test
<languageVersion : 1.0;>
kernel untitled
< namespace : "Your Namespace";
vendor : "Your Vendor";
version : 1;
>
input image4 src;
output pixel4 dst;
void
evaluatePixel()
dst = float4(sampleNearest(src, outCoord()));
The above code will produce a "error saving Pixel Bender Byte Code file" error when exporting for flash player in Pixel Bender Toolkit 2.5.449694.
"dst = (sampleNearest(src, outCoord()));" works fine. And anything like "float4 a= float4(b);" will give same error.Thank you for the error report. I'll put it into our bug database. We're bottling things up for the current version. Gven the workaround, it is unlikely we'll be addressing this bug soon. Please accept my apologies for the annoyance this will cause.
In your second example, float4 a = float4(b), does it return an error if b is only a float4 or regardless of what b is? If b is a scalar float, for example, is the conversion performed correctly? If so, this could be an error that only crops up when using constructor/conversion syntax when the thing being converted is already the correct type.
Thanks,
Chuck. -
Quicktime component error exporting from Flash
Hello people
I try to export from Adobe Flash 8 to QuickTime movie, but i get the error on this image:
http://www.junihh.com/goodies/QTerror.jpg
That is the window error in Windows XP (i'm using a Mac skin). I try exporting to QT using in the Flash settings the Flash Player versions 7, 6, 5 and the same.
I need any idea, because i have an animation to convert to video for a presentation, that include music and sound FX.
This is all that i have:
- Windows XP SP1
- Adobe Flash 8
- QuickTime 7.1.3
- No more ideas
Thanks to any help. I appreciate so much.
Imac 333 Mac OS X (10.3.9) Wacom tablet, scanner, external HD, HP printer, keyboard & mouse bluetoothFlash playback has been disabled (security issues) in
7.1.3 and you'll need to turn it back on.
QuickTime Control Panel/Advanced tab. Check the box
that says "Enable playback of Flash tracks". Quit and
relaunch QuickTime for this change to take effect.
When "Publishing" from Flash you need to choose
version 5. Newer formats will not play in QuickTime.
Hello !!!!
Really thank you, your help working very nice. Now i can export without problems.
Thanks again. -
Error in export to Flash MX 2004
Hi,
While exporting to Flash MX 2004 it shows an dialogue box "
To export a Captivate movie to flash, you should have Macromedia
Flash MX 2004 installed."
Even though I've Flash MX 2004 already installed on my
machine, this error shows. How can I get an FLA output from
Captivate ?
FYI: I am making a screen capture movie like elearning
course.Hi Guys!
Greg said ...
quote:
I wonder if Captivate 2.0 will import a Captivate 1.0 and then
export to Flash with the tweens intact? Any idea yet?]
Hey
Rick, you only made one mistake (but for you even that is
rare). Greg said
"with the tweens intact" ... and you read
"... when tweens interact.".
I'm sure you'll agree that with the clarification, it's not
confusing except the extent to which Greg expects or desires that
movement of objects - including "transitions"? - in the original
Captivate project be preserved after bringing it into Flash 8. As
far as CP1 - to - CP2 - to Flash 8 is concerned, CP1 projects seem
to me to be converted very well. And moving the (now CP2) project
conversion into Flash 8, there is little that won't come along
nicely.
Yes, Greg, including the tweens, which are preserved for the
objects I looked at specifically ... but the right person to answer
that question might be Mark (Fletcher) instead of myself. I
imported CP movies to Flash 8 only to see if it was being done
without the previous loss of non-supported elements (etc.) but I
have no intention of actually working with my Captivate projects
inside the Flash environment - during beta, now, or ever. I just
feel that the power of Captivate is sufficient for my purposes, and
importing it to Flash 8 would accomplish little except to put the
horse in hen-house. (That makes perfect sense to me, and is greatly
humorous as well; but if you don't "get it", I don't think I can
explain it.
. -
With CS5.5 I could export vector art from Flash and open it in illustrator. Now with CS6 I cant do that without breaking everything apart if flash first. This can cause masks to be lost and is a lenghty and complicated process. If I don't break everthing apart not all the layers are imported on the fxg when opened in illustrator. Does anyone know of a solution for this?
Above is a screenshot of artwork in flash. Below is the result after exporting an fxg and opening in illustrator.
It does work if I go into the group and then export (or break everything apaprt so they are no longer in groups). Some files I work with have loads of grouped elements with layer masks making it very complex to break apart and export as fxg. Previous versions allowed export in one step, I could then unlock layers or show hidden layers in the illustrator file. The masks would be imported too. -
Quicktime movie export from Flash CS3 is skipping frame.
When I try to export Quicktime movie from Flash CS3, the
resulting mov file is skipping frames. i.e.: The movie is showing
frame number 1, 2, 3, 4, 5, 6, 7, 7, 7, 10, 11, 12, 12, 12, 15
etc...
As you can see the frame number 7 is repeated 3 times and
frame 8 and 9 are nowhere to be found.
The last configuration I used is 960x540, Sorenson video 3
medium quality, 25 fps, keyframe every 25 frames. 6400 kbits/s.
I tried various configurations,with different codecs and even
with keyframe all frames and I always get simillar problems.
Anyone have an idea what is going on, and how to fix this?
Thank you,
Olivier.The QT exporter in Flash is honestly my least favorite
feature - not the feature itself but how it
works (or how it doesn't work in some cases). For me it is
almost unusable unless you have a very
short timeline, small stage, lower frame rate - like AS
generated effects or something - otherwise,
for true frame accuracy to video output - it is not reliable
enough and not fast enough for any real
world production environment.
So typically for me - I love SWF2Video (www.flashants.com) as
it takes any SWF and makes it into an
AVI that is frame accurate no matter what the frame rate is -
quite incredible - enough so that I
always felt it should have been bundled with Flash (as well
as Wacom tablets).
Harmony is an incredible product - as is SOLO and TBS (Toon
Boom mStudio) - each of those programs
are dedicated animation programs designed for output to video
- Flash has a lot of hats to fill and
it was never really designed for animation to video even
though many of us have found it suitable
for all intents and purposes as an animation program for full
production.
But all in all - the quicktime exporter doesn't really
deliver how we would expect it too I am sorry
to say - I only hope it works as well as it does on the Mac
(Mac users could always choose to export
to Quicktime Video but not PC users).
For now if I am exporting to video I keep it all on the
timeline or nested in Graphic symbols or use
the SWF2Video tool.
hope this helps.
-chris
Chris Georgenes / mudbubble.com / keyframer.com / Adobe
Community Expert
OBastien wrote:
> Thank you for your reply Chris.
>
> I tried different possible solutions you listed but it's
not working.
> Disabling sound had no effects. Changing the FPS is not
an option, it has to be
> 25 FPS. I lowered the resolution to 300 something, it
seemed to be a little bit
> better, but it still dropped some frame, and the image
quality was horrible.
>
> I think it is really sad that we have to try different
settings in the hope
> that flash will grab all the frames. I'm really
disapointed in Adobe. I'm
> pretty sure it is the fault of Adobe and not Apple,
because I don't have does
> problems with Quicktime in ToonBoom Harmony. What is
strange is when I do an
> AVI export I never noticed a dropped frame. I'm not
using AVI video right now
> because I can not find a codec that gives me small size,
fast encoding times,
> the ability to seek in the movie by dragging the
timeline progress bar, and the
> possibility to edit in After Effects. If you know an AVI
codec that does all
> that it would be really great news.
>
> Thank you again,
> Olivier.
> -
Error while Export from 10g and import to 11g
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibuJibu wrote:
Hi,
I get the following error on few tables when i try to export from 10g and import to 11g DB.
import done in US7ASCII character set and AL16UTF16 NCHAR character set
import server uses AL32UTF8 character set (possible charset conversion)
. importing TBAADM's objects into TEST
. . importing table "ACCT_AUTH_SIGN_TABLE"
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "TEST"."ACCT_AUTH_SIGN_TABLE"."MODE_OF_DESPATCH" (actual: 3, maximum: 1)
How to over come this ?
Regards,
jibu
[oracle@localhost sql]$ oerr ora 12899
12899, 00000, "value too large for column %s (actual: %s, maximum: %s)"
// *Cause: An attempt was made to insert or update a column with a value
// which is too wide for the width of the destination column.
// The name of the column is given, along with the actual width
// of the value, and the maximum allowed width of the column.
// Note that widths are reported in characters if character length
// semantics are in effect for the column, otherwise widths are
// reported in bytes.
// *Action: Examine the SQL statement for correctness. Check source
// and destination column data types.
// Either make the destination column wider, or use a subset
// of the source column (i.e. use substring). -
End of file error - avi exported from PPRO
Encore 1.5
PPro 1.5
I have a project with 16 avi files exported from PPro. Four of them caused the error. I re-exported them and one was fixed. The other three keep causing the error.
I am starting to get a little crazy trying to figure out what is going on. Seems I remember that if the audio and video duration get goofed up in PPro then Encore gets cranky.
Is there a way I can fix this other than re-editing from scratch?
Thanks in advance.Mark,
Are you Exporting as DV-AVI files? If you are, and they are mux'ed (Audio & Video multiplexed into one file), try as elemental steams, i.e. Video only DV-AVI and Audio only as PCM/WAV 48KHz 16-bit (or AC3 if you're doing DD 5.1 SS). If you have tried as elemental streams, then try with mux'ed DV-AVI (both Video & Audio). Elemental streams work best for me, and there are only the extra few steps:
Import Video (only) as Timeline
Import Audio (only) as Asset
Drag Audio from the Project Panel to appropriate Timeline. With proper Export from PP, they WILL match up perfectly in Duration.
With mux'ed files, you just Import as Timeline and are done - if that works.
Yes, Encore does get really picky. I always Export as elemental streams and never have any issues, but some have, and a mux'ed DV-AVI works for them - why? I do not know.
I do not know if there are any limitations with PP & Encore 1.5, as I have never used them, but others here WILL know if you need to watch out for version-specific issues.
Good luck,
Hunt -
Export error when exporting to Flash
Hi there,
I'm trying to export a 14 slide Keynote presentation to Flash. Every time I try it allows me to choose a place to save it, but then comes back with the message:
Export Error
The file format is invalid
Nothing gets exported.
Any ideas gratefully recieved.
Thanks,
MarkHi medicineball and welcome to our community
You said:
Really what good is this product if you can't export to
Flash?
Believe it or not, this product can actually be used quite
satisfactorily without ever needing to export to Flash. I'm
guessing you are of the camp that views Captivate as simply a
"Flash add on" that is used only as a mechanism to move something
into Flash for subsequent tweaking. While this is certainly
possible, it was never the primary intent. Had that been the case,
you would see much tighter integration between the products.
Now before I instigate a long tirade about how this is Adobe
and they are huge and should make all their products work
seamlessly together, I'd like to point out that they are dealing
with a product that has had at least four different owners. So the
tight integration isn't there yet, but they are making strides.
Sincerely... Rick -
Hitting a specific file size when exporting from Flash CS5
I need to export three banners to .swf from flash and they all need to be under 61K. They all use photographs and are 5-7 seconds long each and the dimentions are 300x250 px, 300x600 px & 728x90 px. Is there any way I can put in the specific file size in the program and make it under 61k? I tried using the publish settings and lowering the quality and even at 40% quality the file size only went down 20KB from 147 to 127. If you cannot do that in the program is there any third party programs that can be used to do this? Thanks for your help!
What you should do is set the Publish Settings to generate a size report. That way you will have a detailed listing of what each element of the design contributes to the file weight. I would guess that the images are going to be the heavy hitters, so you might need to use image software to optimize them as much as possible before importing them into Flash.
-
Exporting from Flash to FLV, docs say you can, but not how.
The Help files state that you can export animations from Flash to FLV. I'm in CS5 Pro and cannot find ANY way to do that...
Alternatively, you can use Flash to create animations for use in movies. You can create an animation in Flash. You can export the animation as an FLV or F4V file. Then, you can import the FLV or F4V file into Adobe Premiere Pro for editing. In Adobe Premiere Pro, for example, you could add titles or mix the animation with other video sources.
http://help.adobe.com/en_US/flash/cs/using/WS1AFF7D02-09CE-4ff4-AFE8-30164EBC9C85.html
Are these documents wrong??
I can render to QuickTime and the encode, but I lose the linking on click to a url...
Thanks in advance for some guidance.
BTW, it really should be a lot easier in this "Pro" package to create items for YouTube for advertising purposes. Youtube accepts .FLV (Adobe - FLV1 video codec, MP3 audio) but not SWFthen you can't export an flv from flash. the help docs are incorrect.
i added a correction to the help docs. hopefully, the adobe technical writers will fix that will a future edit of those docs. -
Hello,
I am working about a video for a menu i make in Flash. From flash i export in quick time. I have found the better params to export (QT, Anim, ) but do i have to use format : color 24 or 32 (alpha channel ) ?Hi Thierry,
I expect you wont need the Alpha channel. And as long as you are exporting recognisable video resolutions and speeds you should be fine.
I can't think of what the 24 and 32 are refering to. But hey the bigger the better. It's not bits. But Flash is a very multimedia beast so it could be anything.
Good Luck -
Error 108 exporting from keynote to quicktime
hi to all, i know this problem is already questioned, but after reading all the posts about it and after have tried all the possible solutions i cannot export my presentation from keynote 5 to quicknote. i still got the same error 108. the first time i've tried everything worked fine with a presentation of 400 slides full of hyperlink and images with the same transistion ( i still had no idea about the bug ). so i need to do one again bigger of 656 slides with hyperlink and images and the transition.so i tried again to export it... then it started troubles. the 108 error was shown to me for the first time. after that i try many times with small groups of slides from my presentation with hyper link and without them, with transitions and without them... and the result was that sometimes i cannot export one slide neither!!!!!!!!!!!!! one slide white, without anything...
please do you have any idea about it? the other way to see my presentation on a pc means a lot of stupid work campared to a apparently simply export from keynote to quick time
thank you in advanceYeah, me too. Bump. Can anybody explain this behavior?!?
Maybe you are looking for
-
Problem in upgrading obiee 11g
HI I Installed obiee 11g successfully and while running upgrade assistant after giving web logic server port address i m getting an error as router to destination not available In my system there is no OBIEE 10g software and i have only that 10g rpd
-
ICloud drive saves multiple copies?!?
I'm using this new Yosemite feature, iCloud drive. It seems like that if I save a file in the folder and open it up with an application, I get two copies of the same file. One copy in the iCloud folder and another in the folder of the app inside iClo
-
Hi there, I have previously asked for help with creating a "column" down the right hand side of a set of Minutes I am preparing. The advice given was to use tables instead of creating columns. However, now that I have created the table, there is a
-
How to revover compiling environment?
I installed Oracle8.1.7 server on Redhat7.3 so I had to change my compiling version to 6.2 with following files these rpms: compat-egcs-6.2-1.1.2.14.i386.rpm compat-glibc-6.2-2.1.3.2.i386.rpm compat-libs-6.2-3.i386.rpm How could I recover my original
-
SAP Offline Player - Screen Resolution is too low
I have a customer that has the SAP offline player 6.02_5 and is working from two monitors. He appears to have his monitors configured identical from my dual monitor setup in which I have no issues but he is getting a pop-up that reads: This computer