Error on nexus 7k series " operation failed.the fabric is already locked"
getting following error on nexus 7k series switch: error is " operation failed.the fabric is already locked", while removing ntp commands (no ntp server 10.101.1.1) from switch. Please help.
I had the same error message, only in my situation Outlook would only open successfully every 4 or 5 attempts. When Outlook would open (versus just hanging at the splash screen), I would get two dialog boxes with the warning/error message.
After I clicked okay I could get into Outlook.
Previously I experienced this problem running my Office 2010 client with my Exchange 2007 mailbox on my old laptop. The problem followed my mailbox through an Exchange 2010 migration (so new Exchange org), client upgrade to Outlook 2013, and a new
laptop (so I knew it wasn't a corrupt profile). This led me to the conclusion that it was a corrupt item(s) in my mailbox.
To resolve the issue, I archived *everything* in my mailbox to a PST file, ran SCANPST to fix the corruption, and then uploaded everything back into my Exchange mailbox one folder at a time, stopping after each folder to close and restart Outlook so I could
narrow down which folder had the corrupt item if the problem recurred. I'm happy to say my issue is now resolved.
Similar Messages
-
Hi
Our user used to be able to change the categories in a shared outlook calendar appointment but is now getting the error:
The Operation failed the messaging interfaces have returned an unknown error. If the problem persists, restart Outlook.
We have tried re-creating the mail profile but still get the same error.
If anyone has any other suggestions, that would be great, thanks.Glad to hear that it works fine in new profile. It seems your old OST file or other file in profile is corrupted. After you create a new profile, Outlook would re-sync your mailbox to a totally new OST as the data file.
Tony Chen
TechNet Community Support -
Gkr-Message: secret service operation failed: The name org.freedesktop
When I run svn update in my terminal window, I get lots of these errors..:
Gkr-Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
What is this and how do I remove the error?
Regards,
BTJIf you dont want to store your passwords on harddisk, you can disable it by edit the following lines in ~/.subversion/config
password-stores =
store-passwords = no
Last edited by Corubba (2011-10-31 10:52:51) -
I created application using JDeveloper 11g, and have the deploy file EAR read to deploy to oracle application server 10g, but I am encouting the error of Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Below is the log. What did i do wrong? I have created the datasource of HRConnDS, and it shows in EM.
Nov 6, 2009 10:06:12 AM] Application Deployer for hra1 STARTS.
[Nov 6, 2009 10:06:12 AM] Copy the archive to /u01/OraHome_app1/j2ee/home/applications/hra1.ear
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear begins...
[Nov 6, 2009 10:06:12 AM] Unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Done unpacking hra1.ear
[Nov 6, 2009 10:06:12 AM] Unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Done unpacking webapp2.war
[Nov 6, 2009 10:06:12 AM] Initialize /u01/OraHome_app1/j2ee/home/applications/hra1.ear ends...
[Nov 6, 2009 10:06:12 AM] Starting application : hra1
[Nov 6, 2009 10:06:12 AM] Initializing ClassLoader(s)
[Nov 6, 2009 10:06:12 AM] Initializing EJB container
[Nov 6, 2009 10:06:12 AM] Loading connector(s)
[Nov 6, 2009 10:06:12 AM] Starting up resource adapters
[Nov 6, 2009 10:06:12 AM] application : hra1 is in failed state
[Nov 6, 2009 10:06:12 AM] Operation failed with error: java:/app/jdbc/jdbc/HRConnDS not found
Thank you very much for your help.How did you create your datasource, can you post the content, without passwords of course.
Greetings. -
SQL 2008 R2 Management Tools Install Fails - The specified account already exists
Hello,
The installation SQL 2008 R2 Management Tools on a Windows 7 workstation fails with the error, The specified account already exists.
Below is the Summary Log.
Thanks.
Paul
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-10-20 09:02:16
End time: 2014-10-20 09:05:57
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\sqlncli_Cpu64_1.log
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
Machine Properties:
Machine name: WS287
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 0
Installation location:
\\SRVDIA18\MSSQL2008R2Install\x64\setup\
Installation edition: STANDARD
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
IACCEPTSQLSERVERLICENSETERMS: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141020_085102\SystemConfigurationCheck_Report.htm
The specified account already existsThere is definitely more amusing endeavours in this world, than trying to understand why an SQL Server install failed. The log files are verbose - but somehow the real information about what went wrong seems to be hiding. Never have proverb about not being
able to see the forest for all the trees felt more appropriate.
Nevertheless, this is where things go sour:
MSI (s) (F4:EC) [09:04:15:744]: Resolving source.
MSI (s) (F4:EC) [09:04:15:744]: Resolving source to launched-from source.
MSI (s) (F4:EC) [09:04:15:744]: Setting launched-from source as last-used.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SourceDir property. Its value is '\\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\'.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is '\\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\'.
MSI (s) (F4:EC) [09:04:15:744]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{2180B33F-3225-423E-BBC1-7798CFD3CD1F}'.
MSI (s) (F4:EC) [09:04:15:744]: SOURCEDIR ==> \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\
MSI (s) (F4:EC) [09:04:15:744]: SOURCEDIR product ==> {2180B33F-3225-423E-BBC1-7798CFD3CD1F}
MSI (s) (F4:EC) [09:04:15:744]: SECREPAIR: CryptAcquireContext succeeded
MSI (s) (F4:EC) [09:04:15:744]: Determining source type
MSI (s) (F4:EC) [09:04:15:744]: Note: 1: 2203 2: \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\SQL ODBC Native Client 10 - 64bit.msi 3: -2147287038
MSI (s) (F4:EC) [09:04:15:744]: Note: 1: 1316 2: \\server\MSSQL2008R2Install\1033_ENU_LP\x64\setup\x64\SQL ODBC Native Client 10 - 64bit.msi
MSI (s) (F4:EC) [09:04:15:744]: SECREPAIR: Error determining package source type
MSI (s) (F4:EC) [09:04:15:744]: SECUREREPAIR: SecureRepair Failed. Error code: 524F91D34B8
MSI (s) (F4:EC) [09:04:40:775]: Product: Microsoft SQL Server 2008 R2 Native Client -- Error 1316. The specified account already exists.
What account? I supposed you have already asked yourself that and just shaken your head.
But there is another error code 2203, NET HELPMSG 2203 says "The password parameter is invalid." And I note that the source is apparently on a share.
So where is my guess: the MSI installer - which runs as a service, somehow does not have permissions to read the installation from the share. Or is trying to log on to the share with your username/password? No, I don't know, I am just speculating widely.
But my advice would be to copy the installation directory from the share to a local disk.
Maybe that CryptAcquireContext is significant as well - I don't know.
Oh, wait, here is something just before the section above in the log:
MSI (s) (F4:EC) [09:04:15:729]: Note: 1: 2205 2: 3: Environment
MSI (s) (F4:EC) [09:04:15:729]: Note: 1: 2228 2: 3: Environment 4: SELECT `Name`,`Value` FROM `Environment`,`Component` WHERE `Component_`=`Component` AND (`Component`.`Action` = 1 OR `Component`.`Action` = 2)
Action start 9:04:15: WriteEnvironmentStrings.
2205 is "The logon processor did not add the message alias." I see that in a successful log that I have, so that is probably benign. But 2228 seems to be
"There are too many names in the user accounts database."
Exactly what that means, I have no clue, but it could be a Windows problem.
Erland Sommarskog, SQL Server MVP, [email protected] -
I keep getting an error, it say ipod cannot be synced, the missing file is locked
i keep getting an error, it say ipod cannot be synced, the missing file is locked
i keep getting an error, it say ipod cannot be synced, the missing file is locked
-
Getting this error while converting application from framework 3.5 to 4.0
Why not just export the whole site ? Then import.
example:
You want all lists from http://sharepoint.ms.com/sites/it to be imported to http://sharepoint.ms.com/sites/it2
Export the whole sites/it then import to sites/it2
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY -
Hi,
I have a CAS, primary site and a DP. On Site properties I have set client communication : HTTP or HTTPS and PKI. on management point properties as well I have set Client communication as HTTPS PKI.
1. On primary site Multicast_servicepoint status is "error": I checked the mcsmgr.log and found below details:
Failed to send http request /SMS_MCS/.sms_mcs?op=healthcheck. Error 12030
Call to HttpSendRequestSync failed for port 443 with 12030 error code.
Health check operation failed, error code is 12030
Health check operation failed, error code is 12030
2. When I deploy any package to client it stuck in software center as "Downloading the information". no content has been getting copied. I checked the log 'datatransferservice.log' and found below error :
"Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
GetDirectoryList_HTTP mapping original error 0x80072efe to 0x800704cf.
GetDirectoryList_HTTP('https://myDPaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028') failed with code 0x800704cf.
Job {CFD64352-918B-4C1D-A9C4-9C52ABAC6524} reverted impersonation.
Error retrieving manifest (0x800704cf). Will attempt retry 1 in 30 seconds.
Failed to send request to /NOCERT_SMS_DP_SMSPKG$/CAS00028 at host Mydpaddress, error 0x2efe
[CCMHTTP] ERROR: URL=https://mydpaddress.com:443/NOCERT_SMS_DP_SMSPKG$/CAS00028, Port=443, Options=480, Code=12030, Text=ERROR_WINHTTP_CONNECTION_ERROR
Raising event:
instance of CCM_CcmHttp_Status
ClientID = "GUID:41932A1A-ADDE-450F-8F16-22DC875D2E39";
DateTime = "20141225182459.543000+000";
HostName = "mydpaddress.comt";
HRESULT = "0x80072efe";
ProcessID = 7356;
StatusCode = 600;
ThreadID = 6936;
Successfully sent location services HTTPS failure message.
Error sending DAV request. HTTP code 600, status ''
I think there is some issue with IIS configuration on site server or DP or on both. Please let me know a solution..
RegardsI have corrected the PKI certificate. still Issue not resolved.
I checked further and found sms_mp_control_manager was stopped and was offline, Unable to communicate with component (error below)
Unable to query the component.
This is a child primary server. not on production yet. Removing and adding MP will resolve the issue ? if yes what are the prerequesite you suggest. pls share any link .
or any quick resolution you have ? please share...
Log: mpmsi.lasterror
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
MSI (s) (5C:EC) [08:22:19:157]: Note: 1: 1729
MSI (s) (5C:EC) [08:22:19:157]: Product: ConfigMgr Management Point -- Configuration failed.
MSI (s) (5C:EC) [08:22:19:157]: Windows Installer reconfigured the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success or error status:
1603.
MSI (s) (5C:EC) [08:22:19:368]: Deferring clean up of packages/files, if any exist
MSI (s) (5C:EC) [08:22:19:368]: MainEngineThread is returning 1603
MSI (s) (5C:B0) [08:22:19:372]: RESTART MANAGER: Session closed.
MSI (s) (5C:B0) [08:22:19:372]: No System Restore sequence number for this installation.
=== Logging stopped: 12/26/2014 8:22:19 ===
MSI (s) (5C:B0) [08:22:19:375]: User policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Machine policy value 'DisableRollback' is 0
MSI (s) (5C:B0) [08:22:19:375]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (5C:B0) [08:22:19:375]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (5C:B0) [08:22:19:376]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (5C:B0) [08:22:19:377]: Destroying RemoteAPI object.
MSI (s) (5C:00) [08:22:19:377]: Custom Action Manager thread ending.
MSI (c) (30:B0) [08:22:19:378]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (30:B0) [08:22:19:379]: MainEngineThread is returning 1603
=== Verbose logging stopped: 12/26/2014 8:22:19 === -
Hi,
I try to install, the SQL Express 2008 R2 with Advanced
The installation has only one error (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Start time: 2015-01-02 16:17:17
End time: 2015-01-02 16:24:01
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?
LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
Machine Properties:
Machine name: KHPNHSI_BNANG
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: g:\41bee43707e62fab54ec\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: g:\41bee43707e62fab54ec\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PSI\ssamnang
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SystemConfigurationCheck_Report.htm
Please help!
Samnang.Hi SSamnang,
According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
use google drive to upload the error log following the steps in the article:
https://support.google.com/drive/answer/2424368?hl=en
From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
In addition, there is a similar thread for reference:
https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
Regards,
Michelle Li -
Error in Cisco 2500 series Wireless Controller
I have this error in Cisco 2500 series Wireless Controller
The AP type Cisco AIR-CAP35021-A-K9
I cann't connect the client to AP when i try to connect i get this error on Cisco 2500 series Wireless Controller But the AP get ip .
Please can any on help me .
Client Excluded: MACAddress:Base Radio MAC : Slot: 0 User Name: unknown Ip Address: unknown Reason:802.11 Association failed repeatedly. ReasonCode:Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12142556/cisco-2500-series-wireless-controller -
Oidcmprec reconcile operation - operation failed for source-only entries
I am attempting to run the oidcmprec tool to clone entries from a source 11.1.1.5 OID to a destination (also 11.1.1.5):
oidcmprec operation=reconcile source= <destinationHostname:port> destination= <sourceHostname:port> base='("cn=users....")' scope=sub verbose=true
For entries that exist in "source" but not in "destination" - I'm getting this error:
Only in source. Operation failed.
I would expect it to create the entry, as per the doc:
http://docs.oracle.com/cd/B28196_01/idmanage.1014/b15998/syntax_repl.htm#BABFJCIH
entos=ignore | add | del | log2add | log2del | log
Optional. Specifies the conflict resolution rule to use in case an entry exists only in the source directory. The following values are allowed:
Default for reconcile operation is ADD. So why am I getting an error? Thanks.We found the solution by taking the LDIF generated by the tool and manually running ldapmodify - there were some password-related attributes that it didn't like, so we used the exclattr option to prevent these attributes from reconciling:
./oidcmprec operation=reconcile source=(host1:port) destination=(host2:port) base='("dc=com")' scope=sub verbose=true exclattr="userpassword authpassword authpassword;* pwdfailuretime pwdchangedtime pwdaccountlockedtime" -
Weird "secret service operation failed" message
Hi,
Using the subversion commandline works fine but I also get the following message everytime I run an svn command:
svn ls
Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
src/
doc/
pom.xml
Any hints what might be causing the problem?
I cannot find anything related on the web except wireless / segfault related issues but I do not use wireless and there are no errors because the svn commands work as expected.I'm receiving the same error, It does appear to be something to do with pcmanfm as you can see below (on my system it seems to be anyways).
I havn't found a way to fix as of yet, I'm quite new to linux so googling and what little I've learned are my only resources atm
@archbang ~]$ gksu pcmanfm
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
** Message: secret service operation failed: The name org.freedesktop.secrets was not provided by any .service files
(pcmanfm:28673): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
hopefully that's of some help ....to someone -
When releasing a transp. req.not all object in the request could be locked
When trying to release a transport request I get error message that "not all object in the request could be locked. Do you want to release them anyway"
I found an unreleased request (from someone else) containing few objects from my request. However I do not know the owner of that request (and I can not felete it). What to do?
If I release the transport anyway what could happen?Hi Tina,
If ur sure that u only want to release object which u have created and not the other objects then proceed in following way.
1. Go to SE10 and click on create button
2. u will get a popup select the 3rd radio button(ToC)
3 Give the decsription of the Tp
4. u will get anext screen here in menu select request
task->object lise ->Include object (new screen) here u select radio button freely selet obkect -> then new screen then selected the radio button selected objet. Here u give ur object and those object will be store in the created request then u can transport
Regard
Anees Ahned -
Item already locked by user error
Hi, I am getting the problem item already locked by User error when i try to edit a user idm 6.0 So, any solution for this?
The basic reason for this error is the object you are trying to access is already locked by another user (helpdesk/ proxy user or admin).
Generally you can check the lock status who has the active lock on the object from the lh console also.
http://identitycontrol.blogspot.com -
Error "Connection Failed The server may not exist or is not operational..."
This is just FYI in case somebody else runs across this. On one user account, an error window would pop up every so often that said:
Connection Failed
The server may not exist or it is not operational at this time. Check the server name or IP address and try again.
It turns out that the problem was caused by Screen Saver. The error popped up whenever screen saver tried to launch. On the problem account I had the "Pictures" folder selected for the screen saver, and apparently there must be an alias in that folder pointing to something on a remote server, because as soon as I go to System Preferences and open the Screen Saver panel, I get the error.
It has been driving me crazy for months but finally I thought to look in Console, where I saw the error "afp_mount[5045] CFLog (0): CFMessagePort: bootstrap_register(): failed 1103 (0x44f), port = 0x2d03, name = 'com.apple.afp_mount.ServiceProvider'"
Searching for that error led me to the Macosxhints forum at http://forums.macosxhints.com/archive/index.php/t-53209.html where a user had posted the same problem. Changing to a different screen saver or a different folder for pictures resolved the issue.
PowerMac G5 Mac OS X (10.4.6)
PowerMac G5 Mac OS X (10.4.6)Welcome to discussions leffjay. Good one. Cheers.
Maybe you are looking for
-
ITunes asking for reinstall and still won't work with win 7?
Just installed Windows 7 Ultimate on new unwritten hard drive, when I try and open iTunes I get the message that some registry files are not available, the ones that itunes uses for CD burning/playing, please reinstall iTunes. I have done this over a
-
I was recently given "as a gift" a new lap top, at least I was told it was new it's a HP 2000 LAP TOP (NOTEBOOK) PC! IT HAS 4 GB RAM, I don't know if you need more info then that right now but I would gladly get it for you if needed. I recently had a
-
I first noticed this after updating to version 13.x and today I updated to 14.x and hoped the problem would go away but it didn't. Since 13.x when I see files in the "Downloads" window, if I right-click on one, the "Open Containing Folder" is black (
-
After installing lion, windows 7 boot option disappeared.
I had a macbook with snow leopard and windows 7 together. Yesterday I installed macosx lion. After installing it, windows 7 selection disappeared in boot menu. I tried to select boot options by pressing "alt key". I saw a new partition which is R
-
Hi , We have search term 1 as a required entry for customer master data. We have maintain the search term 1 for customer and it shows in change log also ,but somehow next day the search term gets disappear from that customer.This is not appear in cha