Error on WAS no. 10054 SAP Basis System: Operating system call
Hi All,
Error on WAS no. 10054 SAP Basis System: Operating system call
we got the following error message in the syslog of the WAS:
SAP Basis System: Operating system call recv failed (error no. 10054)
The system still works. What can we do?
Thanks.
Best Regards,
Hi,
Please check the folloiwng notes
Error no. 10054
34116 - Syslog: "Operating System call xxxx failed"
Thanks
Adil
Similar Messages
-
My iMac computer was recently worked on and in the process it was completely stripped down and new operating system installed.
OS X Yosemite version 10.10.1.
After this trip to be serviced, when I try to open Photoshop, I get a message "Licensing for this product has stopped working".
At the bottom of the error window, Error: 150:30
If you continue to see this message after restarting your computer, please contact Adobe technical support for help.
Any help resolving this issue would be greatly appreciated!
Thank You,
joeError "Licensing has stopped working" | Mac OS
-
I was trying to update my ipad operating system and I thought it was done. When I disconnected it from my computer the ipad went blank then the apple logo appeared midscreen with an elongated oval across the screen under it. Now nothing on the ipad works. I think it was backed up on my computer but I can't find anything that will allow me to sync the two or regain functionality on my ipad. Any suggestions?
Hi,
I would put the ipad in recovery mode and redo the update, once that is done you could restore the ipad from your backup and you would not lose any data.
http://support.apple.com/kb/ht4097
Ricc -
i keep trying to download the Photoshop free trial on my windows xp but an error message that says "You are running an operating system that Photoshop no longer supports" pops up, any idea why?
Because Photoshop CC requires Windows 7 or above...
See the System Requirements. -
TADM70: SAP System: Operating System and Database Migration
Dear Colleagues,
SAP is offering a rare opportunity to participate in "TADM70: SAP System: Operating System and Database Migration" in North America.
For details please see
<a href="https://service.education.sap.com/sap(bD1lbiZjPTAwMSZkPW1pbg==)/bc/bsp/sap/hcm_learning/trainingtype.htm?sap-params=b3R5cGU9RCZvYmppZD03MDAxNjA1MA%3d%3d">TADM70</a>
Usually this class is held only at overseas locations. SAP is willing to arrange it in North America. However we need to gather enough participants for this event to occur.
If you are interested and eligible to participate you could prebook this class at SAP Education Portal <a href="https://service.education.sap.com/sap(bD1lbiZjPTAwMSZkPW1pbg==)/bc/bsp/sap/hcm_learning/prebookings.htm">TADM70 Prebooking</a> and you could also contact Annie Normand [email protected] or myself.
Best regards,
Alexander Perelygin
SAP NetWeaver Team Lead
Terasen Gas Inc
E-mail: [email protected]
Phone: 604-592-7519Dear Collegues,
TADM70 : SAP System: Operating System a Classroom Training
will be held
09-Jun-2008 - 11-Jun-2008
at SAP Toronto Training location.
TADM70: SAP System: Operating System and Database Migration
Schedule
Day Date From To
Monday 09.06.2008 09:00 17:00
Tuesday 10.06.2008 09:00 17:00
Wednesday 11.06.2008 09:00 17:00
Availability
Location Language Price Free Places Start Date
SAP Toronto English 2325.00 CAD Yes 09.06.2008 Add to Shopping Cart
Taxes are not included in the price.
Contact Information
Address: SAP Toronto Bloor
1600-2 Bloor St. East
M4W 1A8 - Toronto Phone: 416-929-9746 Fax: 416-927-2160
Those who interested please book it at SAP Education web site or by phone.
Alexander Perelygin -
Getting error when installing OBIEE 11.1.1.6 "Operating system does not support IPV4".
HI,
I am trying to install OBIEE 11.1.1.6 on Windows 7 .
Have created repository successfully ,using the RCU 11.1.1.6 and now tring to install
OBI. I am getting the below error
"Operating system does not support IPV4".
Can anyone please suggest why i am getting this error or
how should i get rid with this error??
Manoj.Just in case check this Doc ID 1410233.1
~ http://cool-bi.com -
Excelreportdemo project link error with CVI2010 on windows 7, 64-bit operating system
I am trying to run the excelreportdemo project in CVI2010 on windows 7, 64-bit operating system. I have the Excel2013 installed as well. I have chosen the build configuration as release or debug for 32 bit system so to be compatible for the test platform for production.
However, I get 12 Project link errors as following:
Undefined symbol '_ExcelRpt_RangeBorder@24' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WriteDataFromTableControl@16' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetCellValue' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetCellRangeAttribute' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ChartAddtoWorksheet@40' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ChartWizard@52' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_SetChartAttribute' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorkbookNew@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ApplicationNew@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_ApplicationQuit@4' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorkbookClose@8' referenced in "excelreportdemo.c".
Undefined symbol '_ExcelRpt_WorksheetNew@12' referenced in "excelreportdemo.c".
I have found a previous dicussion back in 2007. Unfortunately it did not help for the same problem on my new machine and CVI2010. Could anyone give me help on this/
Thanks!
Yuwei
Solved!
Go to Solution.The previous discussion link is pasted below:
http://forums.ni.com/t5/LabWindows-CVI/Problems-adding-the-activex-instrument-experiencing-undefined/m-p/580608/highlight/true#M31390
It did not solve my problem, but may spark your idea of helping me.
Thanks a lot!
Yuwei -
I just bought a mac book pro - When setting up my computer it told me that I there was updates to my operating sytem - to install the updates. I installed them and then restarted my computer - But it still says that I have an update to do - which is the operating sytem one that I just did??? Do I still need to do something else.
bschau1963,
sometimes updates have other updates as prerequisites, so one set of updates can lead to another set of updates. Unless it is asking you to apply the same update over and over again, you should probably accept the new set of updates that Software Update is offering. -
Got a probook says install system operating system on hard drive
what do i do hp probook s series
Hi,
Please write your notebook product number (p/n) and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
I fail to start the sap server with error:Operating system call recv failed
I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid 560 (PC with Windows NT)
relno 6200
patchlevel 0
patchno 674
intno 20020600
pid 3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c 978]
shared lib "dw_xml.dll" version 674 successfully loaded
shared lib "dw_xtc.dll" version 674 successfully loaded
shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm) 12784 (752)
DpShMCreate: sizeof(tm_adm) 1690816 (8412)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c 9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c 11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c 7883] -
Filestream Creation Unable to Open Physical File Operating System Error 259
Hey Everybody,
I have run out of options supporting a customer that is having an error when creating a database with a file stream. The error displayed is unable to open physical file operating system error 259 (No more data is available). We're using a pretty
standard creation SQL script that we aren't having issues with other customers:
-- We are going to create our data paths for the filestreams.
DECLARE @data_path nvarchar(256);
SET @data_path = (SELECT SUBSTRING(physical_name, 1, CHARINDEX(N'master.mdf', LOWER(physical_name)) - 1)
FROM master.sys.master_files
WHERE database_id = 1 AND file_id = 1);
-- At this point, we should be able to create our database.
EXECUTE ('CREATE DATABASE AllTables
ON PRIMARY
NAME = AllTables_data
,FILENAME = ''' + @data_path + 'AllTables_data.mdf''
,SIZE = 10MB
,FILEGROWTH = 15%
FILEGROUP FileStreamAll CONTAINS FILESTREAM DEFAULT
NAME = FSAllTables
,FILENAME = ''' + @data_path + 'AllTablesFS''
LOG ON
NAME = AllTables_log
,FILENAME = ''' + @data_path + 'AllTables_log.ldf''
,SIZE = 5MB
,FILEGROWTH = 5MB
GO
We are using SQL Server 2014 Express. File streams were enabled on the installation SQL Server. The instance was created successfully and we are able to connect to the database through SSMS. The user is using an encrypted Sophos.
We have tried the following:
1. Increasing the permissions of the SQL Server server to have full access to the folders.
2. Attempted a restore of a blank database and it failed.
There doesn't seem to be any knowledge base articles on this particular error and I am not sure what else I can do to resolve this. Thanks in advance for any help!Hi Ryan,
1)SQL Server(any version) can't be installed on encrypted drives. Please see a similar scenario in the following link
https://ask.sqlservercentral.com/questions/115761/filestream-and-encrypted-drives.html
2)I don't think there is any problem with permissions on the folder, if the user can create a database in the same folder. Am not too sure. Also see the article by
Jacob on configuring the FILESTREAM for SQL Server that describes how to configure FILESTREAM access level & creating a FILESTREAM enabled database
Hope this helps,
Thanks
Bhanu -
NW ABAP - Error Message: Signal c00 received by operating system
Hi,
I have a problem starting the NSP instance. I have installed JAVA trial and then ABAP Trial.
The SAP Management Console form the JAVA Installation recognizes the ABAP Installation and adds an Application Server entry.
Starting the JAVA instance is no problem and obviously has to be done before starting ABAP.
But when I start the ABAP instance named NSP I received the first time two error messages:
- SAP-Basis System: Operating system call getservbyname_ failed (error no. 0 ) and
- SAP-Basis System: Signal c00 received by operating system
I got rid of the first one by prociding according to SAP Note Number: 39227:
- I added the entry "sapmsNSP 3600/tcp " to my service file (%windir%/system32/drivers/etc/services)
after that at least the process msg_server.exe started properly
the disp+work.exe remains unstartable throwing still the second error message at me. Another message can be seen in the Syslog which is not marked as an error:
"SAP-Basis System: > 3 possible network problems detected - check tracefile and adjus"
Anybody an idea how I can get the ABAP instance running ( I hope I don't have to uninstall the JAVA instance )?
Thanks for your help
TorstenHi,
What's the instance numbers of your two SAP systems?
If you first installed the Java system it's normally 00 and 01 for SCS and Java Instance. The ABAP system has to have an higher number (I always use a number +10 as the other instance e.g. 10 for the ABAP system to be on the save side).
Seems your ABAP system now use the message Server of the J2EE Engine (sapmsNSP 3600/tcp) Check the profile of your ABAP system, there you will find the right entry for the message server to connect too.
Hope this helps a little bit.
Regards,
Daniel -
Error: The Operating system Windows Vista Version 6.1 is not supported
While installing Oracle Database 'win64_11gR1_database_11070' on Windows Server 2008 R2,x64, I get this error during Product specific pre-requisite checks:
"The Operating system Windows Vista Version 6.1 is not supported. Install the recommended service pack"
Edited by: aa100 on 16-Jun-2010 09:04What's not clear with this message? Windows 2008 R2 requires 11gR2:
http://www.oracle.com/technology/software/products/database/oracle11g/112010_win64soft.html
Werner -
What is Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154
If Can, Please Help!
I received the following System Error while trying to update Adobe Reader 8:
Operating System Errror: Error (16291.103.506-73172312.80040154.FFFFFFFF.80040154
I'm running Home Vista PremiumHave no clue. However, this is not the Reader forum either. It may be that you do not have permission to do the update (probably need to be the administrator) or you have anti-virus running. If it is really an OS error, then maybe the question needs to be asked in a MS forum.
-
NO REMOTE BACKUP & RESTORE ON BLACKBERRY PROTECT ON BB10 OPERATING SYSTEM --- READ THIS POST
Dear BlackBerry,
First of all I would like to establish that I am a very loyal customer of BlackBerry, so anything that I will say in this letter is because of the personal concerns shared by me and millions of loyal BlackBerry customers.
BlackBerry have launched the new BlackBerry Classic Q20 phone.
Apart from the reintroduction of the Navigation and Track pad that is above the physical keyboard and slightly bigger size.
What are the real differences between this new BlackBerry Classic Q20 and the BlackBerry Q10 ?
The main issues and concerns are that BlackBerry have reduced and in fact left out several features on the BlackBerry 10 operating system, for which was available on the BlackBerry 7 operating system, such as on the BlackBerry Bold 9900.
Some features may not be vital or important, but other features were vital and important and by BlackBerry leaving out these vital features, it beckons the question as to why are BlackBerry limiting the software functions and capabilities of the BlackBerry 10 operating system as to what the BlackBerry 7 operating system has in place.
Do not misunderstand me in what I am saying, BlackBerry is still the best in what it does and I love the product. And the BlackBerry 10 operating system does have features and functions that the BlackBerry 7 operation system does not have.
But the whole point of improvement is that BlackBerry keep the best and vital functions that are available on the BlackBerry 7 operating system and actually include those features and functions in to the BlackBerry 10 operating system. That would make sense and move forward.
There are two vital features and functions that I will now mention that are available on the BlackBerry 7 operating system but was left out of the BlackBerry 10 operating system.
Firstly, there is a feature on the BlackBerry 7 operating system, called "SELECT ALL"
This feature allowed the user to go in to their, photos or pictures or videos or music or documents or phone contacts folders and if the user wished to share all of those items in that particular folder to another phone device with Bluetooth or a computer with Bluetooth, or to delete all of the items in one go within that folder, then the user would not need to manually click on each item within that folder, which is time consuming especially if there may be in excess of one hundred items in each folder or more than one hundred phone contacts within the contacts folder, where the user needs to now manually click on each item using the "Select More" feature that is the available feature on the BlackBerry 10 operating system and is very time consuming.
But within the BlackBerry 7 operating system there is the feature and function that is called "SELECT ALL"
This feature allows the user to "select all" of the individual items within the folder of their choice or the phone contacts folder, with just one click and be able to either delete all of these items or to share transfer all of these items to another device or computer that has Bluetooth.
Can BlackBerry bring this feature to the BlackBerry 10 operating system as an update as soon as possible ?
The next feature and function that was on the BlackBerry 7 operating system but was deliberately not included in the BlackBerry 10 operating system is the >
Remote Back Up and Remote Restore on the BlackBerry Protect.
This cloud back up and restore feature was vital and in the history of BlackBerry with Blackberry's advanced encryption and security, this cloud back up and restore feature was always safe and the security and protection of data being backed up and restored to and from Blackberry's cloud has NEVER been compromised or hacked or accessed in any way what so ever by anyone. And this made Blackberry's reputation for security number one and gave the loyal BlackBerry customers even more confidence in the BlackBerry product.
Now I will go in to detail why it is vital that BlackBerry must include and introduce this feature that is available on the BlackBerry 7 operating system but it is not available on the BlackBerry 10 operating system.
Firstly, the current BlackBerry protect that is available on the BlackBerry 10, has some lovely fancy features, such as remote locating of the phone and remote wiping of the phone, should it ever be lost or stolen.
The fact is, this is a good feature, but if the phone was lost forever or indeed stolen, then that's it, the device data is also lost forever and the only data that would be accessible to restore on to a new BlackBerry 10 operating system device, would be what ever the last back up that was available that was made using BlackBerry Link on the computer.
Now, doing a phone back up on BlackBerry Link on the computer, is all very well and good, but there are many limitations to this.
Firstly,
if the owner of a BlackBerry 10 operating system device was to be at home or in the office and connect their BlackBerry 10 device to their computer to BlackBerry Link and do a full device Back Up. Then that device is now only Backed Up at that point and is only Backed Up to date at that moment.
Now imagine after that Back Up was made, the computer in which BlackBerry Link is installed on and the Back Up was made, imagine the situation where that computer broke and all the saved data was lost or destroyed for ever or that computer that had the BlackBerry Link backed up data was stolen and never recovered ? Then everything that was backed up from the BlackBerry 10 operating system device to that particular computer using BlackBerry Link, would now be lost for ever. Which means that the Back Up that was made using BlackBerry Link is pointless in this above situation.
Second Example,
This next example is even more realistic and is vital in my argument for the Remote Back Up and Remote Restore.
Imagine for example it is a day that you decide to do a full phone Back Up of your BlackBerry 10 operating system device on your computer using BlackBerry Link. Everything is now Backed Up only on that computer and is only up to date at that moment.
Then later that day, you need to travel to another town or city or state or country, for what ever reason and you may be away for a day or several days or weeks.
While you are away, the computer that you used to make the last full Back Up using BlackBerry Link, is at your home or in your office, hundreds or thousands of miles away from where you are with your BlackBerry 10 device.
While you are away, you input new contact details or new calendar schedule entries or new memo notes or new reminders or all of these above vital entries in to your phone.
You do this the next day when you leave and then throughout your business or personal vacation, you continue to input vital information in to your BlackBerry 10 operating system device, such as new contacts, new or amended calendar entries, new memos, new tasks. All the vital information that you need stored safely and secure.
Then your BlackBerry 10 operating system device is either lost or destroyed or stolen. But whichever, it is now gone for ever and all of the NEW vital information that you have in putted in to your BlackBerry 10 operating system device since the last full Back Up that was made using BlackBerry Link on the computer that is hundreds or thousands of miles away, has now been lost for ever.
What is the point in in putting any new data or information in to your BlackBerry 10 device if a situation as mentioned above was to happen ?
Where is the benefit of only the BlackBerry Link Back Up in this above situation ?
Now if the device was a BlackBerry 7 operating system device such as the BlackBerry Bold 9900, then if the above situation was to happen, if you was away from your home or office since the last full Back Up of your device was made on a computer.
If you were hundreds or thousands of miles away and whilst you was away on vacation you need entered new contact details or new memos or new reminders or new calendar entries or amendments in to your BlackBerry 7 device. Then you can immediately after in putting these new items of information and data in to your BlackBerry 7 device, you can do a Remote Back Up to the BlackBerry Cloud using any connected wireless network or your mobile phone network using your data that is on your sim card to do this Remote Back Up.
Then if after this Remote Back Up was done, if the BlackBerry 7 device was lost or stolen or destroyed, then you could simply go and purchase another BlackBerry 7 operating system device and input your primary email address that was used to register the previous BlackBerry 7 device, in to the new BlackBerry 7 device and then once set up, then open up BlackBerry Protect and click on Restore and select the last saved cloud Back Up and then all of the data that you last Backed Up over BlackBerry Protect Cloud is now installed on to your newly purchased BlackBerry 7 operating system device.
This was a vital feature for total security and peace of mind of all BlackBerry users.
All BlackBerry users do NOT want to download any third party application that makes claims to offering this service as any third party application is NOT reliable and NOT safe and NOT secure.
Only the Remote Back Up and Remote Restore on the BlackBerry cloud that is available on BlackBerry Protect on the BlackBerry 7 operating system, is the only proved secure cloud back up for BlackBerry and actually works precisely and is totally safe and secure.
So I now ask the question to BlackBerry,
Why is this vital Remote Back Up and Remote Restore feature of BlackBerry Protect that is available on the BlackBerry 7 operating system, is not on the BlackBerry 10 operating system ?
Will BlackBerry please listen to its loyal customers and please introduce the two above mentioned features as an update to the BlackBerry 10 operating system.
These above two mentioned functions and features are vital and it's what millions of loyal BlackBerry customers want installed on their BlackBerry 10 devices.
Please can someone at BlackBerry please come back to me and tell me if these above two features will be introduced to the BlackBerry 10 operating system as an update or download ? As its what we all want back.
Thank You.Ditto on both points. Meanwhile I use the solution of a third party backup.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Prefixed index vs. Non-prefixed Index. Which is faster?
If you have a partitioned table, which type index (prefix or non-prefix) would benefit most performance wise?
-
In other spreadsheet programs I have been able to add a single cell to a column without having to copy and pste the entire column. Is there a way to do this in Numbers?
-
PI 7.11 how to pick up only one file at a time in file adapter
Hi Is there a smart way of only picking up one file at a time (for every poll) in a sender file adapter? E.g. There are 100 files in the source folder but I only want to pick up 1 of the files every time I poll the source folder in my sender file ada
-
Safari stuck on "Facebook will install" screen when I go to dl any app via safari
I'm a new iPod owner so this might be a dumb question. I went to install the fb app that came with the iPod touch and it froze on the screen on safari that says "app will install shortly". I can get to the home screen fine and do everything else nor
-
What can't I use my iPad in another house with the same internet service as mine
Why can't I use my iPad in another location that has same internet service. Comcast. As me