Error one node has failed

hu Jun 16 10:04:07 2011
WARNING: inbound connection timed out (ORA-3136)
Thu Jun 16 10:04:07 2011
WARNING: inbound connection timed out (ORA-3136)
two node rac
windows
10.2.0.4
can anyone know on above error

hu Jun 16 10:04:07 2011
WARNING: inbound connection timed out (ORA-3136)
Thu Jun 16 10:04:07 2011
WARNING: inbound connection timed out (ORA-3136)
can anyone know on above errorThis is WARNING not an ERROR.
Refer this note. *Troubleshooting ORA - 3136 WARNING Inbound Connection Timed Out [ID 465043.1]*

Similar Messages

I just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: the application has failed to start because MS

i just tried to install the 11.4 update (or whichever one is the most recent update as of 1/26/2014) and when it failed i tried to install manually and now whenever i try to use it, i get the following error: "The application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem." Right after i click ok i then get this error: "Itunes was not installed correctly. Please reinstall Itunes. Error 7 (Windows error 126)." I tried to uninstall Itunes and then reinstall the 11.03 version but that didnt work either. I want to know if i copy all of the music in my itunes folder to an external without consolidating can i still transfer all my itunes music from my current windows xp pc to a brand new one and have my current itunes library in my new pc? Basically i just want to know 3 things: What exactly does consolidating the itunes library do? Can i copy, paste, and transfer my itunes library to an external and from there to a new pc? Will i be able to transfer my itunes library without consolidating the files?

I have found a temporary solution, allowing the previous version of iTunes (v. 11.1.3 (x64) in my case) to be re-installed. It will allow you to re-establish use of iTunes until the Apple software engineers fix the most recent disasterous upgrade (v. 11.1.4). Please see and follow the procedure in the following article:http://smallbusiness.chron.com/reverting-previous-version-itunes-32590.html The previous version works beautifully.

Unable to save a recordset - Type Error this node has no properties

I've hit a brick wall.
I'm creating a recordset using a session variable as a parameter. It tests OK in
DW CS4 but when I click <OK> it fails with an error message "Type Error this node has no properties".
Below is the recordset I'm trying to save
Below is the error message I receive
I had this problem previously and was referred to a thread regarding a corrupted cache file. So, I deleted the cache and it failed again. I tried deleting cache a second time just to be sure I did it right and it failed again with the same results. So then I tried deleting the configuration folder and it still fails the same way.
Does anyone have any suggestions? I'm running DW CS4 on Win 7., the page is a php page and the db is MySQL.
Thanks
Tony

I think I solved my own problem. Just in case anyone else has a similar problem here's what I did.
I had created the php page by copying and renaming a similar page, I then removed the previous recordset and tried adding the new one, this was when it failed.
I checked the Server Behaviors and found a behavior that my new page did not need, once that was deleted I was able to create the new recordset.

One node is failing

One node is periodically are failing . When users are connecting , they are getting the error :
ERROR: ORACLE connection error: ORA-01034: ORACLE not availableORA-27101: shared memory realm does not existLinux-x86_64 Error:
2: No such file or directory.
And then the command : srvctl status database -d te , is reporting , that one of instances are running , but other are not .
Please suggest , what log files to check .

user10890074 wrote:
One node is periodically are failing . When users are connecting , they are getting the error :
ERROR: ORACLE connection error: ORA-01034: ORACLE not availableORA-27101: shared memory realm does not existLinux-x86_64 Error:
2: No such file or directory.
And then the command : srvctl status database -d te , is reporting , that one of instances are running , but other are not .
Please suggest , what log files to check .How about you problem?
It seemed your node hung.
1. you should check alert log file.
2. you should check log file in CRS_HOME/log/<nodename)/ PATH

I can not open any pdf file... . Fatal error. Acrobat has failed to connect a DDE server

fatal error
Acrobat has failed to connect a DDE server....
What can I do?

Did you register and activate Acrobat? I don't remember the DDE issue off hand, but it should not be occurring with the regular Acrobat installation.

OBIEE 10g Installation error "The application has failed to start because its side-by-side configuration is incorrect"

Hi,
I did installation of OBIEE10g on windows server 2008r2 which is placed on VM ware, Installation completed successfully. but while starting the BI services or opening the administration tool it is showing error as below
"The application has failed to start because its side-by-side configuration is incorrect.Please see application event log or use the command line sxtrace.exe tool for more detail."
Please guide me any suggestions.
Thanks in advance
Regards,
Satya

check these Error&#58; The application has failed to start because the side by - Microsoft Community https://forums.oracle.com/message/10578756
https://forums.oracle.com/thread/958782
Resolving Side-by-Side Configuration Issues - OJ's perspective

3rd Party Posting Error - Document Transfer has Failed

Our posting run was created and the document was released. When we try to post, we get a message saying the the document has been rejected and the status is changed to "Document Transfer Has Failed".
Does anyone know how we can clear this and get the document to post?
Thanks

I just had them delete the document and re-run and it posted. That still doesn't answer the question as to why it happened in the first place.

Error: The Task has failed to load on Execute Package Task using TFS Build and MSBuild.exe on dedicated Build Machine.

I'm trying to automate my building and deployment of SSIS packages using TFS build definitionss in conjunction with MSBuild.exe on a separate build machine.
I have successfully built and deployed my projects but receive the following error:
Error: Failed to load task "etl_UWP_Stage_tstg_7_Large",type "". The contact information for this task is "Microsoft Corporation: Microsoft SQL Server .... "
This error happens at runtime as well as if I perform a "Validate..." on the SSIS Catalog on the server.
This only occurs when trying to execute a package that contains an Execute Package Task. Any other packages that are doing the actual work are working just fine.
In addition, when I do the MSBuild from my developer machine with the same deployment process everything works fine, even the Execute Package Task.
I can even open up the project on the build machine in VS2012, rebuild all, then deploy and everything works fine.
Some things I've considered/verified:
1) Visual Studio 2012 and Visual Studio Data Tools 2012 are both on the build machine and my local machine.
2) The .NET version being used by VS2012 is the same on the build machine and my local machine.
3) I find it suspicious that the "Type" referenced in the error above is blank...but not sure where to go with that.
4) Obvious difference is that during the TFS Build and Deploy on the build machine, everything is running under the TFS Service account, rather than my account...once again...not sure where to go with this, but it is a significant difference.
Has anyone had similar issues or have any thoughts on things to try?
Thanks,
Jason

Not sure why I couldn't find this answer in my earlier searches...
But this thread solved it for me:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
Essentially I had to install SSIS on the build machine so that the 64-bit version for
ExecPackageTask.dll, was available. I did this from the original media CD selection Integration Services as a feature.
Hope this helps someone in the future.

Installing Latest Firefox on Windows XP Embedded gives error: "This application has failed to start because pdh.dll was not found"

I'm trying to install the latest (standards-based) browser I can on on old Windows XP Embedded computer. The computer's hardware does not meet the "Recommended Hardware" of a Pentium 4 (it has a P3). I initially tried installing/running Firefox version 28, and that seemed to work fine. Version 36 gives the error I stated in the question. It's not paramount that I run the *latest* version of Firefox (the browser is ONLY used for an intranet application), but I'd like to install the latest version that will run, and if there's a simple fix for this version, I'd like to explore that.
Regards,
Gerrat

Well, I was pretty sure it didn't have malware. It was running a steady state - like program & we have dozens of these on our network (but not on our domain). We have a corporate anti-virus (Sophos) running on all the computers on our domain, and there are no notifications of anything suspicious coming from these units.
Just to be sure I installed and ran an antivirus scan against it though - as suspected, nothing suspicious found.
As I mentioned, FF 28 runs fine, it's just the latest (36.0) that doesn't run (I haven't tested any versions in between). Either seems to install without hitch, but when the latest version is run, it gives the error about the missing dll.
Regards,
Gerrat

Error -2096 quitimes has failed to intialize

i completely remove itunes and quicktimes and reinstall it and the same error sign appears!

Issue or symptom
If QuickTime for Windows is set to run in "Compatibility Mode" you may receive the following error message when starting QuickTime:
"QuickTime failed to initialize. Error # -2096
Please make sure QuickTime is properly installed on this computer."
Products affected
QuickTime for Windows
Solution
Turn off Compatibility Mode for QuickTime.
Right-click on the QuickTimePlayer application (located in C:\Program Files\QuickTime) and choose Properties from the shortcut menu.
In the Properties window, click on the Compatibility tab
Deselect the checkbox labeled "Run this program in compatibility mode for."
Click Apply.
Close the Properties window.
iTunes for Windows: How to turn off Compatibility Mode
http://docs.info.apple.com/article.html?artnum=302478

Since upgrading to FireFox 6 I cannot run Firefox in Avast Sandbox - get error "This application has failed to start because xul.dll was not found". Firefox works fine outside Avast Sandbox.

The error box is entitled
firefox.exe - Unable To Locate Component.
It suggests re-installing may fix the problem but I've un-installed and re-installed firefox a number of times and no change.

Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

On Import Metadata in Admin Tool get "Connection has failed" error

Hello,
I am attempting to import Metadata in Oracle BI Administration Tool v.11.1.1.5 and i get " "Connection has failed" error.
What is the solution? Thank you in advance, Sonya

Hi ,
My server is on Linux 64bit and client is on windows xp
i m facing the same error as connection has failed.
below steps are done:
1.Copy the tnsnames.ora from Oracle Database home (ORACLE_HOME\NETWORK\ADMIN\) to the following locations.
\OracleBI1\network\admin (Example: C:\OBI\Oracle_BI1\network\admin)
\oracle_common\network\admin (Example: C:\OBI\oracle_common\network\admin)
2.Set the TNS_ADMIN environment variable value with one of the copied locations in the step 1 in user.cmd or user.sh file depending on your OS. This file will be found under \instances\instance1\bifoundation\OracleBIApplication\coreapplication\setup (Example : C:\OBI\instances\instance2\bifoundation\OracleBIApplication\coreapplication\setup)
Can u just me furthere steps for linux server.
Thanks

FSL-06002 Error 14001 This application has failed to start

Hello Folks
I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
The installation is under Windows 2003 server SP2 and Oracle 920
I'm in the Database Instance Installation (non-unicode) and phase 29 (Updating database statistics)
The following error is:
TRACE [synxccuren.cpp:452]
 grantAccessTo
Granted access rights 0xf01ff for object default to user chavez-server\mauadm with inheritance flags 0.
TRACE [synxccuren.cpp:1045]
 CSyCurrentProcessEnvironmentImpl::setUser()
Switched to user: mauadm.
ERROR 2009-08-23 13:27:58
FSL-06002 Error 14001 (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
) in execution of a 'CreateProcess' function, line (284), with parameter (E:\usr\sap\MAU\SYS\exe\run/brconnect ...).
When i ran the brconnect manually i received the same error (This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem)
When i ran brconnect using cmd.exe i received the following error
E:\usr\sap\MAU\SYS\exe\run>brconnect.exe
The system cannot execute the specified program.
I think is important mention this, i had problem 1 setp before about the brtools 7.00
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output:
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance MAU failed
BR0280I BRCONNECT time stamp: 2009-08-23 13.06.43
BR0804I BRCONNECT terminated with errors
I downloaded the correct version (640) DBATOOLS Package for Oracle 9.2 and i replaced the files
Please folks someone have any idea about this, i tried search on the web and nothing, on the marketplace and nothing
Thanks all for your help

>
Markus Doehr wrote:
> > I have problem installing SAP R/3 Enterprise (4.72 Enterprise Ext2) IDES Version
> > The installation is under Windows 2003 server SP2 and Oracle 920
>
> and something on top: 640_EX2 is only for Oracle 10g - it won't work with Oracle 9.2. So you should change your kernel to 640 back - then the R3DLLINS works.
>
>
>
>
> Markus
Ok Markus, i did the following
First i downloaded vcredist_<platform>.exe from Microsoft web page and retry the installation
And the following error i got
Operative System open's a Window that say following
brconnect.exe Unable to locate component "this application has failed to start because orasql10.dll was not found. Re-installing the application may fix this problem"
And this is the log
WARNING 2009-08-23 17:52:07
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 128. Output:
ERROR 2009-08-23 17:52:07
CJS-00288 Could not update database statistics. DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 128. SOLUTION: See brconnect.log for details.
Second i downloaded the kernel 640 whitout ext2 and i get the following error
INFO 2009-08-23 17:41:32
Output of E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU is written to the logfile brconnect.log.
WARNING 2009-08-23 17:41:32
Execution of the command "E:\usr\sap\MAU\SYS\exe\run/brconnect -u / -c -f crsyn -o SAPMAU" finished with return code 3. Output: BR0801I BRCONNECT 6.40 (51)BR0252E Function _popen() failed for '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' at location BrPipeOpen-4BR0253E errno 2: No such file or directoryBR0272E Execution of program '( F:\ORACLE\MAU\920\bin\SQLPLUS /nolog ) < \nul 2>&1' through pipe failedBR0303E Determination of Oracle version failed
ERROR 2009-08-23 17:41:32
CJS-00288 Could not update database statistics. DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPMAU returned 3. SOLUTION: See brconnect.log for details.

OBIEE The connection has failed Essbase Error 226246926

I recently installed BI Administration Tool 11.1.1.7 64bit on my Windows 7 machine and was trying to establish a connection to Essbase. After setting the properties for Database and Connection Pool in the Physical Layer, when I click on "Import Metadata" I am getting an error "The connection has failed Essbase Error 226246926". I choose Essbase 9 on the Database type The connection pool properties for the rest of it is all default, I even tried using Essbase 11 but still getting the same error.
Earlier, when I had BI Admin Tool 11.1.1.6, I was able to successfully establish the connection using database type as Essbase 9 but after the the upgrade I was not able to establish the connection.
I would appreciated any suggestions/inputs to fix the issue

Hi,
his issue is fixed. tnsnames.ora file need to exist in the both OBIEE Oracle homes ( C:\Middleware\Oracle_BI1 and C:\Middleware\oracle_common )
After the 11.1.1.5 installation on my Windows Machine, C:\Middleware\Oracle_BI1\network\admin directory structure was created.
However for the 2nd Oracle Home (C:\Middleware\oracle_common), the directory structure existed only till C:\Middleware\oracle_common\network. I copied the TNS file to C:\Middleware\oracle_common\network.
pls mark correct,if ansrwd
thanks

The upload has failed. [Content.Error.ContentRead]

I receive this error:
"The upload has failed.[Content.Error.ContentRead]"
Any idea?
Thanks

Check the overlays in your source document. When you select the overlay frame, check for a yellow triangle in the Folio Overlays panel. For example, an image sequence overlay might be pointing to a folder that cannot be found. Let us know if you still keep getting this error.

Error one node has failed

Similar Messages

Maybe you are looking for