Error opening saved files - no main window
I have this weird problem with GarageBand lately - when I open saved songs, some of them will open fine, but others will go through the opening process (where the "loading" bar is all you see) and then the loading bar completes and there is no main window. Other times, GB asks to open a file as if I used the "open" command, even though I used the "recent tracks" menu.
I don't know how to test, but I am wondering if some of these tracks were saved with the iLife preview - I recall saving a few like this, but can't recall which ones I tried it on. The reason I think this is the cause is because it only seems to happen with songs I have recorded since getting iLife 08 with the MacPro, and I don't believe the feature was there before.
Some songs recorded with this new version are fine, others aren't. It's even possible that the tracks without the iLife preview are the issue. I will have to make a test song with and without and see what the results are.
Tried that and it still wont work,
Both in my user account Library and the main folder..
The Logic 9 disc wont accept me installing Sountrack saying
i have a newer version installed. This makes no sense seeing
as i also have updated versions of Mainstage and Logic itself but
THOSE i can choose to reinstall..
Hmmm.. what the **** !
I have thrown everything i can find that says Soundtrack out already..
HELP ! =)
Similar Messages
-
[Solved] libreoffice-3.4.1-2 and General Error opening/saving file
I've just done a 'pacman -Syu' and had libreoffice upgraded to version 3.4.1-2.
Now whenever I open a file (new or existing document) or save the file, I get a small window with the meaningless error message:
General Error
However, at least the file can be edited normally and seems to be saved okay in reality.
Anyone else finding this problem?
PS: It happens no matter if I load LibreOffice via the soffice or libreoffice commands; also there are no text messages shown if run from a terminal.
Last edited by ninian (2011-07-07 20:16:19)Thanks to the package maintainers for addressing this bug so quickly.
Just updated rasqal and all seems well with libreoffice now. -
I am unable to open an xls file. I get the message: Import Error The document is encrypted and can’t be opened.
I am able to open the file on my windows computer at work. there is no password needed.See note 2 in Troubleshooting issues with iTunes for Windows updates for starters...
tt2 -
how do i open acsm file on my windows pc? i downloaded adobe digital edition, but it says error, check valuation?
thanks in advanceI'm wondering if that is similar to the issue I've encountered before, where the file association for acsm is not to ADE but a certificate file. If you could try right clicking on the acsm and 'open with' and search for ADE and make sure 'always open with this' is check marked, that may, I repeat may, help.
If you've already done this, I don't know what to say, that's just what I've seen. -
Problem in opening excel file in different window
hi
i want to open excel file in different window it open in same window properly on the bases of condition but when i try to open in different with window.open( )
it give error that file has already used or path not exist OR requisted site either unavailable
how can i rectifiedHi.
I am too facing the same problem. I am using Jakarta Poi to display my resultset in an excel sheet directly(and not into a jsp)
The browser opens a window showing Open Save Cancel. If i click and save the excel sheet and then open, it opens. But clicking on Open directly doesnt open the excel sheet. Rather it gives the same error
The file name or path name does not exist.
The file you are trying to open is being used by another progrtam . close the document in other program and try again
The name of the work book your tring to save is the same as name of another document that is readonly .try saving workbook with different name
Can somebody please help me fix this problem, since its an urgent requirement. Mail me at [email protected]
Thanks
Hitesh -
I open iWeb but the main window doesn't open/appear on screen. The little windows like the inspector and font windows appear. Can anyone help?
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT -
Error opening preferences file
When opening a pdf document in Adobe Acrobat 9 Pro, saved either locally or on the network, I receive the message "Error opening preferences file The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder." I've tried saving this file with a different name and I still receive this error. If I choose to open this document with Adobe Reader 9, I have no issues. Why would I be having this issue with Adobe Acrobat 9 Pro?
What release of System Update are you trying to install? What OS are you using ie, win 7, 8, 8.1?
Did you really mean IMPORT failed (not export)?
Are your running the install . exec from a Network drive?
Please look in C:\users\*your id*\appdata\local\temp for the msi install log and post 50 lines of the log around where the error occurred. -
Error opening url 'file: What does it mean?
When I test some of my as3 movies a new window opens and I can test the file. Yet when I test other movies I get an (error opening url 'file message.) What causes that? It seems to me that if a movie plays it should also test in a new window.
It doesn' work. I only got the one file open. The swf file won't open at
all. The fla file won't test. But when I debug the fla file the flash player
debugger opens the movie in a new window and I get this message in the
output window: "Attempting to launch and connect to Player using URL
/Users/schweideltyson/Desktop/Circle.swf"
SWF Users:schweideltyson:Desktop:Circle.swf - 2887 bytes after
decompression
Could it be my flash player is not working properly? I wish I knew. -
I get a message-error opening installationlog file. Verify that the specified lof file location exists and is writeable-when I try to uninstall iTunes and other components. How can I uninstall and reinstall iTunes?
Hey jemerritt,
Thanks for the question. I understand you are experiencing issues with iTunes for Windows. The following resources may help to resolve your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
Error opening video files: dynamiclinkmediaserver
Error opening video files: dynamiclinkmediaserver has encountered an error.
../../Src/directoryRegistry.cpp-283
It happens in any of the Adobe software I have installed: Bridge, Lightroom and Photoshop CS6 extended. Cannot work on video files and the software goes down and need to restart. running windows 7 64bitI have uninstalled and reinstalled all my software of Adobe looking for a solution. After uninstall I have use the adoble cleaner with a sussessfully notice after finished. I have try some of the steps adviced here in some other forums with similar troubles but got unsuccess results. at this point I have reinstalled all my software of Adobe in Win7 64 bit: photoshop CS6 extended and Lightroom 4. In both applications find the same message error when opening video files and both applications works perfect with all other image files: tiff, jpg, raw...
for me its a weird situation that I have not found a clear answer to this problem if we think that I found other adobe users have previously noticed same or very similar experiences with the Dynamiclink Media Server and the "../../Src/directoryRegistry.cpp-283" error message. Actually I wet to Adobe and tried to download the dynamiclink media server and install it manually and there is a failure message saying something that could not install it on this computer.....
The same problem happens having or not having installe the Adobe application Manager which is now CCloud, in both cases is unable to open video files and in both cases the application crashes and have to use Ctl+Alt+Supr to close the Adobe crashed software... before and after being reinstalled a fresh version of my adobe software. -
I am running Vista and Windows Mail, I can not open PDF files when in Windows Mail, I must save to Desktop first, this has changes recently and I do not know why or how to fix.
Why after 6 year's this has changed?
I would like to open PDF's straight from Window Mail.Good day Jeff.
I am running most current Adobe Reader X.
Tks Mark -
Error in saving file. this is an usual error.
"error in saving file. this is an unusual error. perhaps some computer maintenace is required"
This notice keeps coming up whenever i try and save an audio file, which i have generated with "final vinyl".
I have no idea what to do next. If anyone has any suggestions i would be most grateful.
Adnan SharafThat could make them up to 300 MB a piece, since that's the same format used by CDs. I would backup your data, and check to make sure the directory is in good shape as my FAQ explains:
http://www.macmaps.com/backup.html
http://www.macmaps.com/directoryfaq.html -
Error opening fla file.
Hi,
I am a relative newcomer to the world of Flash, so I apologize if this issue is a bit mindless for the veterans.
I am working with Flash CS6 on a Macbook Pro and recently encountered a problem when trying to open a file. An error message pops up, saying 'there was an error opening the file...'. No further details are available.
Looking at the file information, there is still data there, as the size is about 300MB.
I've tried some amateur sleuthing online for a solution, mostly involving changing the .fla extentsion to .rar and repairing the file that way, but nothing I have tried has resolved the issue.
Am I essentially out of luck, or is there a reliable solution for this kind of problem?
Thanks for any help!
BootsWow, thanks for such a quick reply, kglad.
I had actually previously zipped and unzipped the file and ended up with a folder full of stuff that I didn't know what to do with. Again, this is where my amateur understanding comes into play.
In the unzipped folder, there are 'bin', 'library' and 'meta-inf' folders, as well as a 'DOMDocument.xml' file, a 'MobileSettings.xml' file, a 'PublishSettings.xml' file and finally a file called 'mimetype'.
Should I be encouraged by this?
I'm pretty clueless at this point about how I might proceed from here. I see that the 'library' folder contains all the sound files for the project (it's a soundboard), but is there a way to go from this point to recovering the project as it was before this issue came up? Or am I stuck with starting the project all over gain?
Thanks again for the help! -
I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
starts fine except when I try to deploy a session bean that is marked as
clustered. I get an error about reading a jar file
(D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
created when the server started. Every server is getting this error and I
tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
ideas?
Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
java.util.zip.ZipException: error in opening zip file
at java.util.zip.ZipFile.open(Native Method)
at java.util.zip.ZipFile.<init>(ZipFile.java:69)
at java.util.zip.ZipFile.<init>(ZipFile.java:84)
at
weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
at
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
.java:74)
at
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
StreamBase.java, Compiled Code)
at weblogic.cluster.StateDump.readObject(StateDump.java:59)
at
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
jectInputStreamBase.java, Compiled
Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
treamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
tStreamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
eamBase.java, Compiled Code)
at
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
treamBase.java, Compiled Code)
at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
Code)
Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket receive
error: java.lang.RuntimeException: I/O error
opening JAR file from
file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar
From previous posts I see this is a known bug. Is there a fix yet? btw, how
did a bug of this magnitude
get past QA. :(
Elan Halfin <[email protected]> wrote in message
news:[email protected]...
> I'm using WLS 5.1 SP8 on NT 4.0 and trying to setup a cluster. The cluster
> starts fine except when I try to deploy a session bean that is marked as
> clustered. I get an error about reading a jar file
> (D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar) that WLS
> created when the server started. Every server is getting this error and I
> tried setting up the same paths (D:\weblogic) but it doesn't matter. Any
> ideas?
>
> Wed Jan 24 15:04:10 EST 2001:<I> <WebLogicServer> WebLogic Server started
> java.util.zip.ZipException: error in opening zip file
> at java.util.zip.ZipFile.open(Native Method)
> at java.util.zip.ZipFile.<init>(ZipFile.java:69)
> at java.util.zip.ZipFile.<init>(ZipFile.java:84)
> at
> weblogic.boot.ServerClassLoader.deploy(ServerClassLoader.java:141)
> at
>
weblogic.cluster.AnnotatedServiceOffer.expandClassPath(AnnotatedServiceOffer
> .java:74)
> at
>
weblogic.cluster.AnnotatedServiceOffer.readObject(AnnotatedServiceOffer.java
> , Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> jectInputStreamBase.java, Compiled
>
> Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> treamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> tStreamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> eamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> treamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readArrayList(WLObjectInput
> StreamBase.java, Compiled Code)
> at weblogic.cluster.StateDump.readObject(StateDump.java:59)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readPublicSerializable(WLOb
> jectInputStreamBase.java, Compiled
>
> Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readLeftover(WLObjectInputS
> treamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectBody(WLObjectInpu
> tStreamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObject(WLObjectInputStr
> eamBase.java, Compiled Code)
> at
>
weblogic.common.internal.WLObjectInputStreamBase.readObjectWL(WLObjectInputS
> treamBase.java, Compiled Code)
> at weblogic.cluster.TMSocket.execute(TMSocket.java, Compiled Code)
> at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled
> Code)
> Wed Jan 24 15:04:19 EST 2001:<E> <MulticastSocket> Multicast socket
receive
> error: java.lang.RuntimeException: I/O error
>
> opening JAR file from
> file:/D:/weblogic/mycluster/server196/tmp_deployments/ejbjar1559.jar
>
>
-
Hi, I'm traying to start up a database in sqlplus on SuSE 8.2 and Ora9.2, I have the next error:
SQL> conn / as sysdba
Connected to an idle instance.
SQL> startup pfile=/opt/ora9/admin/pavilion/pfile/initmydb.ora
ORACLE instance started.
Total System Global Area 101781824 bytes
Fixed Size 450880 bytes
Variable Size 83886080 bytes
Database Buffers 16777216 bytes
Redo Buffers 667648 bytes
ORA-01990: error opening password file '/opt/ora9/product/9.2/dbs/orapw'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
My password file is /opt/ora9/product/9.2/dbs/orapwmydb
How can I use my orapwmydb file?Hi Marco,
as far as I know, you have to use the REMOTE_LOGIN_PASSWORDFILE = SHARED option in your init...ora file.
In this case you have one password file for one or more databases. It can only have the entries for SYS and INTERAL.
I'm sorry to cannot answer your question of having different password files for different databases %-)
Klaus
Maybe you are looking for
-
Hi I am Installing SAP NW 2004 on AIX 5.3 + Oracle Database. At the Software Unit Installation Phase I am getting the following Error ERROR 2009-10-15 14:22:31 CJS-30156 SDM deployment failed for at least one of the components to deploy.<br> SOLUTIO
-
Just sent the following to Apple's iWeb Feedback; figured I'd post it here as well just for the heck of it. Some of these requests may apply only to my particular -- some would say peculiar -- workflow, but I suspect there are at least a couple which
-
Is ColdFusion the solution for me?
I've recently started working with Air for a client and I've been having somewhat of a hard time converting. I'm normally a .net developer so I'm trying to overcome my learning curve. I'd like to know if ColdFusion would be a good solution for the
-
FBuilder 10.1.2.3 crah's when compiling on Win7
Hi all, I can not believe that I am the first one of this error ;-) Forms Builder: 10.1.2.3 System Windows7(64bit) RAM 2GB Java JRE 1.6_25 Error: Formsbuilder crash when I try to compile via „compile all". This happen
-
Pages won't show up in the area of iTunes where files are transferred.
I want to pass Pages docs from my iMac to my iPad via iTunes and the sync cable but Pages doesn't show up in the bottom area. Only thing I'm thinking is that I have the box checked that allows the Cloud to sync with all my Pages documents. Could that