Error: ORA-16778: redo transport error for one or more databases. please help.

Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211    ttprmy
192.168.50.212    orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
    orclstby1 - Primary database
      Error: ORA-16778: redo transport error for one or more databases
    orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME=orcl)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1_DGMGRL)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.3.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为：user4914135

#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
LOG_ARCHIVE_DEST_2   VALID     REMOTE LGWR       PENDING ALL_LOGFILES    PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3   INACTIVE LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3   INACTIVE PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclprmy
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                 NOAFFIRM delay=0 optional comp
                                                 ression=disable max_failure=0
                                                 max_connections=1 reopen=300 d
                                                 b_unique_name="orclstby1" net_ti
                                                 meout=30, valid_for=(all_logfi
                                                 les,primary_role)
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclstby1
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                 =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                  db_unique_name=orclprmy
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
log_archive_dest_23                  string
log_archive_dest_24                  string
log_archive_dest_25                  string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help.

Similar Messages

Error: ORA-16778: redo transport error for one or more databases

Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>

This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry

Exchange 2010 SP2 RU2 - Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases

We have been getting intermittent SCOM alarms for our Exchange 2010 MBX server citing "Indexing backlog reached a critical limit of 48 hours or the number of items in the retry queue is greater than 10000 for one or more databases"
I see events in EventViewer that SCOM is triggering on, but not whats generating the events or how else to test for them.
    get-eventlog -computername SERVERNAME -logname "Application" -after "03/14/2013" | ?{$_.eventid -eq "5604"} | select MachineName,EventID,EntryType,Message | ft -autosize
One MS Forum post online says it is a bug in RU4, unclear if it may also be a bug in RU2 (our installed version).
    http://social.technet.microsoft.com/Forums/en-US/exchangesvradmin/thread/9dcb3011-9327-4935-9479-62b38a6ddd87
    "I was looking for the same error and found this.. it basically says that this is a bug in RU4 and RU4-v2...and it needs to be removed."
tests using troubleshooting scripts find no issues with search indexer,
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>.\Troubleshoot-CI.ps1
    Get-EventLog : No matches found
    At C:\Program Files\Microsoft\Exchange Server\V14\scripts\CITSLibrary.ps1:622 char:40
    + $msftesqlCrashes = get-eventlog <<<< -computername $Server -after $StartTime -logname "Application" -source $msftesqlServiceName | where {$_.eventId
    -eq $msftesqlCrashEventId}
        + CategoryInfo : ObjectNotFound: (:) [Get-EventLog], ArgumentException
        + FullyQualifiedErrorId : GetEventLogNoEntriesFound,Microsoft.PowerShell.Commands.GetEventLogCommand
    Name IsDeadLocked CatalogStatusArray
    SERVERNAME False {DATABASENAME\SERVERNAME, DATABASENAME\S...
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>
and tests against searches on each DB themselves show no issues and respond typically within 3 seconds.
    [PS] C:\Program Files\Microsoft\Exchange Server\V14\scripts>Test-ExchangeSearch | ft Server, Database, ServerGuid, ResultFound, SearchTimeInSeconds, Error -AutoSize
    Server Database ServerGuid ResultFound SearchTimeInSeconds Error
    SERVERNAME DATABASENAME b16e3461-257c-40dd-a9ad-99a5f41a927e True 2.937
I also tried to check the Performance Viewer for the MSExchange Search Indexer and MXExchange Search Indices but am unsure which of the many metrics would indicate this issue.
We have had no reports of search issues from our users and have been unable to duplicate any impairment in our testing.
Does anyone else have any suggestions for tests to check or steps to take on this alert? Is it simply a false alarm or a timeout of other sorts during testing? We have 80 DAGs on this server (as well as all our servers, some of which have also reported the
same alert) and the Test-ExchangeSearch command times out before completely testing all DAGs.

Hi IAMChrisL,
Any updates?
Frank Wang
TechNet Community Support

HT1238 I have a 64-bit and the download is telling me there is an error because it's set-up for a 32-bit. Please help.

I've tried the recommended steps in the forum and posted on the help page and nothing is working. My 1st gen shuffle is not connecting to iTunes on my 64-bit PC.
Please help.
Thanks

I have this problem also. I have not had trouble installing any previous version of iTunes. I am mystified why now it is a problem.
Here is the error I get:

Need to maintain 4 plants for one sales organization ? Please help ?

I have one India Sales organization and 4 different plants which can deliver the goods.
For eg. IS01 = Sales organization. &
P001= Plant 1
P002= Plant 2
P003= Plant 3
P004= Plant 4.
Now the problem here is when i maintain material for combination (MM01) P001, IS01 & DC - 10; the delivering plant in sales org view 1 = P001.
Then, while maintaining (MM01) combination for P002, IS01 & 10, the delivering plant should be P002 but it shows P001. If I change the delivering plant to P002 it also changes the delivering plant in first combination (P001 to P002).
I just wanted to know 1. Is it possible to deliver goods from different plants under 1 sales organization ( I guess yes) ?
2. If yes, then how should i maintain delivering plant in various combination as per my requirement ?
Please provide your suggestions experts ?
Thanks.

Hi,
I just wanted to know 1. Is it possible to deliver goods from different plants under 1 sales organization ( I guess yes) ?
Yes.
2. If yes, then how should i maintain delivering plant in various combination as per my requirement ?
Please provide your suggestions experts ?
First create a material in MM01 with a combination of P001, IS01 & DC - 10; the delivering plant in sales org view 1 = P001. then you need to extend the same material to below different plants by using MM01 T-coce
P002= Plant 2
P003= Plant 3
P004= Plant 4.
Go to MM01 give the same material press enter it will through warning message "Material type & Industry sector copied from Master record"
then choose same material number and type in "Copy from" then press enter
automatically select view tab will come with previous selection then click on continue.
one more organisation levels tab will open
In copy from option maintain-PLANT-P001/STORAGE LOCATION/SALES ORG-IS01/DC-10
then maintain left side "Organizations level" maintain-PLANT-P002/STORAGE LOCATION/SALES ORG-IS01/DC-10
click on continue.
automatically master data will be copied from earlier material number.
just press enter and save it and repeat the same steps for the other plants P003 & P004 in MM01.
Thanks,
Krishna.

Redo Transport Error

I am facing following errors , first error is on production database and second error is on physical standby database.
1. ORA-16778: redo transport error for one or more databases
2. ORA-01017: invalid username/password; logon denied
I study above messages but could not resolve. Now i shall be v v thankful if someone can help me in resolving errors, in simple step-by-step way.
Thank in advance

1. ORA-16778: redo transport error for one or more databases
16778, 00000, "redo transport error for one or more databases"
// *Cause: The redo transport service was unable to send redo data to one
//          or more standby databases.
// *Action: Check the Data Guard broker log and Oracle alert log for
//          more details. Query the LogXptStatus property to see the
//          errors.2. ORA-01017: invalid username/password; logon denied
Provide valid username/password
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version

Cannot convert character sets for one or more characters Error message

Hello,
I am getting this error message "Cannot convert character sets for one or more characters" when i try to transfer the data from Application server file as CSV to PSA.
Using T-code AL11
Under SAP Directory I open my file I can able to see all contents of my file right?
But i can't able to see all my data because of this I am getting ths error message?
I am loading Master data attribute
Is there any limitation on record length?
Please share your thought..
Thansk

Which length should not exceed 60.
When i load the same file from local workstation I can able to load no error message
Why I am getting if i load same file from application server?
Thanks

SQL Error: ORA-12899: value too large for column

Hi,
I'm trying to understand the above error. It occurs when we are migrating data from one oracle database to another:
Error report:
SQL Error: ORA-12899: value too large for column "USER_XYZ"."TAB_XYZ"."COL_XYZ" (actual: 10, maximum: 8)
12899. 00000 - "value too large for column %s (actual: %s, maximum: %s)"
*Cause:    An attempt was made to insert or update a column with a value
which is too wide for the width of the destination column.
The name of the column is given, along with the actual width
of the value, and the maximum allowed width of the column.
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.
*Action:   Examine the SQL statement for correctness. Check source
and destination column data types.
Either make the destination column wider, or use a subset
of the source column (i.e. use substring).
The source database runs - Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
The target database runs - Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
The source and target table are identical and the column definitions are exactly the same. The column we get the error on is of CHAR(8). To migrate the data we use either a dblink or oracle datapump, both result in the same error. The data in the column is a fixed length string of 8 characters.
To resolve the error the column "COL_XYZ" gets widened by:
alter table TAB_XYZ modify (COL_XYZ varchar2(10));
-alter table TAB_XYZ succeeded.
We now move the data from the source into the target table without problem and then run:
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));
-Error report:
SQL Error: ORA-01441: cannot decrease column length because some value is too big
01441. 00000 - "cannot decrease column length because some value is too big"
*Cause:
*Action:
So we leave the column width at 10, but the curious thing is - once we have the data in the target table, we can then truncate the same table at source (ie. get rid of all the data) and move the data back in the original table (with COL_XYZ set at CHAR(8)) - without any issue.
My guess the error has something to do with the storage on the target database, but I would like to understand why. If anybody has an idea or suggestion what to look for - much appreciated.
Cheers.

843217 wrote:
Note that widths are reported in characters if character length
semantics are in effect for the column, otherwise widths are
reported in bytes.You are looking at character lengths vs byte lengths.
The data in the column is a fixed length string of 8 characters.
select max(length(COL_XYZ)) from TAB_XYZ;
-8
So the maximal string length for this column is 8 characters. To reduce the column width back to its original 8, we then run:
alter table TAB_XYZ modify (COL_XYZ varchar2(8));varchar2(8 byte) or varchar2(8 char)?
Use SQL Reference for datatype specification, length function, etc.
For more info, reference {forum:id=50} forum on the topic. And of course, the Globalization support guide.

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Error-No value given for one or more required parameters when using oleDBDa

Hello,
I have this sql statement and it works well, the Crystal Report gives good result when I put concrete values like:
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>='1001' And (NOVI.GBR)<='1080') AND ( ((NOVI.AB)='AK') OR ((NOVI.AB)='AK') ) AND ((NALOG1.DATA)<=#10/31/2011# and (NALOG1.DATA)>=#10/31/2011#) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
but when I use code like this :
string comstring = "SELECT NOVI.GBR as gbrnov, NOVI.AB as abnov, NALOG1.DATA as datanov, Min(NALOG1.POCKM) AS MinOfPOCKM, Max(NALOG1.KRAJKM) AS MaxOfKRAJKM, (Max(NALOG1.KRAJKM)-Min(NALOG1.POCKM)) AS RAZLIKA, Count(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)) AS Gorivo, Avg(IIf(([MAGACIN.SIFRA]='0991000'),[MAGACIN.KOL],Null)/100) AS potrosgor100km, Sum(IIf(([MAGACIN.SIFRA]='0993050' Or [MAGACIN.SIFRA]='0993051'),[MAGACIN.KOL],Null)) AS Motmaslo, Sum(IIf(([MAGACIN.SIFRA]='0992201'),[MAGACIN.KOL],Null)) AS Addblue, ([Addblue]/[Gorivo])100 AS Addbluegor, Sum(IIf(([MAGACIN.SIFRA]='0999001'),[MAGACIN.KOL],Null)) AS Antifriz, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA',''))) AS Zabeleska FROM (NALOG1 INNER JOIN NOVI ON NALOG1.GBRV = NOVI.GBR) INNER JOIN MAGACIN ON NOVI.GBR = MAGACIN.GBR where (((NOVI.GBR)>=? And (NOVI.GBR)<=?) AND ( ((NOVI.AB)=?) OR ((NOVI.AB)=?) ) AND ((NALOG1.DATA)<=? and (NALOG1.DATA)>=?) ) GROUP BY NOVI.GBR, NOVI.AB, NALOG1.DATA, ([Addblue]/[Gorivo])100, NOVI.DATAP, NOVI.DATAS, IIf(([NOVI].[KM]<=([NOVI].[KMS1][NOVI].[KMS2])),'ZA SERVIS',(IIf(([NOVI].[KM]<=([NOVI].[KMP1][NOVI].[KMP2])),'PROVERKA','')))";
Edited by: Don Williams on Nov 23, 2011 7:22 AM

and the code after that:
command.CommandText = comstring;
            if (radioButton4.Checked == true)
                if (textBox1.Text == "")
                    button1.Enabled = false;
                    MessageBox.Show("Внесете гаражен број", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    textBox1.Focus();
                    command.Parameters.AddWithValue("@gbr1", textBox1.Text);
                    command.Parameters.AddWithValue("@gbr2", textBox1.Text);
            else if (radioButton5.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1080");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton6.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1081");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else if (radioButton7.Checked == true)
                command.Parameters.AddWithValue("@gbr1", "1001");
                command.Parameters.AddWithValue("@gbr2", "1149");
                button1.Enabled = true;
                textBox1.Text = "";
            else
                MessageBox.Show("Немате избрано гаражен број или тип на автобус.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                button1.Enabled = false;
            if (checkBox1.Checked == true && checkBox2.Checked==true)
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else if ((checkBox1.Checked == true) && (checkBox2.Checked == false))
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "AK");
                button1.Enabled = true;
            else if (checkBox2.Checked == true )
                command.Parameters.AddWithValue("@ab1", "GP");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = true;
            else
                MessageBox.Show("Немате избрано автобаза.", "Warning", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                command.Parameters.AddWithValue("@ab1", "AK");
                command.Parameters.AddWithValue("@ab2", "GP");
                button1.Enabled = false;
            command.Parameters.AddWithValue("@data1", dateTimePicker1.Value.Date);
            command.Parameters.AddWithValue("@data2", dateTimePicker2.Value.Date);
             DataSet2 dataSet2=new DataSet2();
             OleDbDataAdapter oleDBDataAdapter1 = new OleDbDataAdapter();
            oleDBDataAdapter1.SelectCommand=command;
                dataSet2.Clear();
                oleDBDataAdapter1.Fill(dataSet2,"Tabela");
                if (dataSet2.Tabela.Count == 0)
                    MessageBox.Show("Nema podatoci za toj period");
                ReportDocument cryRpt = new ReportDocument();
                cryRpt.Load(@"C:\Potrosuvacka-Pregledi\Potrosuvacka-Pregledi\CrystalReport6.rpt");
            cryRpt.PrintOptions.PaperOrientation = CrystalDecisions.Shared.PaperOrientation.Landscape;
                cryRpt.SetDataSource(dataSet2);
                crystalReportViewer1.DisplayToolbar=true;
            crystalReportViewer1.ReportSource = cryRpt;
            crystalReportViewer1.Refresh();
                conn.Close();
I get an error:
"No value given for one or more required parameters."
Could anybody help me please?
Thank you in advance.
Edited by: nelpet06 on Nov 23, 2011 9:30 AM

I am getting error "ORA-12899: value too large for column".

I am getting error "ORA-12899: value too large for column" after upgrading to 10.2.0.4.0
Field is updating only through trigger with hard coded value.
This happens randomly not everytime.
select * from v$version
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
PL/SQL Release 10.2.0.4.0 - Production
CORE     10.2.0.4.0     Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
Table Structure
desc customer
Name Null? Type
CTRY_CODE NOT NULL CHAR(3 Byte)
CO_CODE NOT NULL CHAR(3 Byte)
CUST_NBR NOT NULL NUMBER(10)
CUST_NAME CHAR(40 Byte)
RECORD_STATUS CHAR(1 Byte)
Trigger on the table
CREATE OR REPLACE TRIGGER CUST_INSUPD
BEFORE INSERT OR UPDATE
ON CUSTOMER FOR EACH ROW
BEGIN
IF INSERTING THEN
:NEW.RECORD_STATUS := 'I';
ELSIF UPDATING THEN
:NEW.RECORD_STATUS := 'U';
END IF;
END;
ERROR at line 1:
ORA-01001: invalid cursor
ORA-06512: at "UPDATE_CUSTOMER", line 1320
ORA-12899: value too large for column "CUSTOMER"."RECORD_STATUS" (actual: 3,
maximum: 1)
ORA-06512: at line 1
Edited by: user4211491 on Nov 25, 2009 9:30 PM
Edited by: user4211491 on Nov 25, 2009 9:32 PM

SQL> create table customer(
2 CTRY_CODE CHAR(3 Byte) not null,
3 CO_CODE CHAR(3 Byte) not null,
4 CUST_NBR NUMBER(10) not null,
5 CUST_NAME CHAR(40 Byte) ,
6 RECORD_STATUS CHAR(1 Byte)
7 );
Table created.
SQL> CREATE OR REPLACE TRIGGER CUST_INSUPD
2 BEFORE INSERT OR UPDATE
3 ON CUSTOMER FOR EACH ROW
4 BEGIN
5 IF INSERTING THEN
6 :NEW.RECORD_STATUS := 'I';
7 ELSIF UPDATING THEN
8 :NEW.RECORD_STATUS := 'U';
9 END IF;
10 END;
11 /
Trigger created.
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME,RECORD_STATUS)
2                values('12','13','1','Mahesh Kaila','UPD');
              values('12','13','1','Mahesh Kaila','UPD')
ERROR at line 2:
ORA-12899: value too large for column "HPVPPM"."CUSTOMER"."RECORD_STATUS"
(actual: 3, maximum: 1)
SQL> insert into customer(CTRY_CODE,CO_CODE,CUST_NBR,CUST_NAME)
2                values('12','13','1','Mahesh Kaila');
1 row created.
SQL> set linesize 200
SQL> select * from customer;
CTR CO_   CUST_NBR CUST_NAME                                R
12 13           1 Mahesh Kaila                             I
SQL> update customer set cust_name='tst';
1 row updated.
SQL> select * from customer;
CTR CO_   CUST_NBR CUST_NAME                                R
12 13           1 tst                                      Urecheck your code once again..somewhere you are using record_status column for insertion or updation.
Ravi Kumar

Replicat error: ORA-12899: value too large for column ...

Hi,
In our system Source and Target are on the same physical server and in the same Oracle instance. Just different schemes.
Tables on the target were created as 'create table ... as select * from ... source_table', so they have a similar structure. Table names are also similar.
I started replicat, it worked fine for several hours, but when I inserted Chinese symbols into the source table I got an error:
WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, OGGEX1.prm: OCI Error ORA-12899: value too large for column "MY_TARGET_SCHEMA"."TABLE1"."*FIRSTNAME*" (actual: 93, maximum: 40) (status = 12899), SQL <INSERT INTO "MY_TARGET_SCHEMA"."TABLE1" ("USERID","USERNAME","FIRSTNAME","LASTNAME",....>.
FIRSTNAME is Varchar2(40 char) field.
I suppose the problem probably is our database is running with NLS_LENGTH_SEMANTICS='CHAR'
I've double checked tables structure on the target - it's identical with the source.
I also tried to manually insert this record into the target table using 'insert into ... select * from ... ' statement - it works. The problem seems to be in the replicat.
How to fix this error?
Thanks in advance!
Oracle GoldenGate version: 11.1.1.1
Oracle Database version: 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
NLS_LANG: AMERICAN_AMERICA.AL32UTF8
NLS_LENGTH_SEMANTICS='CHAR'
Edited by: DeniK on Jun 20, 2012 11:49 PM
Edited by: DeniK on Jun 23, 2012 12:05 PM
Edited by: DeniK on Jun 25, 2012 1:55 PM

I've created the definition files and compared them. They are absolutely identical, apart from source and target schema names:
Source definition file:
Definition for table MY_SOURCE_SCHEMA.TABLE1
Record length: 1632
Syskey: 0
Columns: 30
USERID 134 11 0 0 0 1 0 8 8 8 0 0 0 0 1 0 1 3
USERNAME 64 80 12 0 0 1 0 80 80 0 0 0 0 0 1 0 0 0
FIRSTNAME 64 160 98 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
LASTNAME 64 160 264 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
PASSWORD 64 160 430 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
TITLE 64 160 596 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
Target definition file:
Definition for table MY_TAEGET_SCHEMA.TABLE1
Record length: 1632
Syskey: 0
Columns: 30
USERID 134 11 0 0 0 1 0 8 8 8 0 0 0 0 1 0 1 3
USERNAME 64 80 12 0 0 1 0 80 80 0 0 0 0 0 1 0 0 0
FIRSTNAME 64 160 98 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
LASTNAME 64 160 264 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
PASSWORD 64 160 430 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
TITLE 64 160 596 0 0 1 0 160 160 0 0 0 0 0 1 0 0 0
Edited by: DeniK on Jun 25, 2012 1:56 PM
Edited by: DeniK on Jun 25, 2012 1:57 PM

File_To_RT data truncation ODI error ORA-12899: value too large for colum

Hi,
Could you please provide me some idea so that I can truncate the source data grater than max length before inserting into target table.
Prtoblem details:-
For my scenario read data from source .txt file and insert the data into target table.suppose source file data length exceeds max col length of the target table.Then How will I truncate the data so that data migration will be successful and also can avoid the ODI error " ORA-12899: value too large for column".
Thanks
Anindya

Bhabani wrote:
In which step you are getting this error ? If its loading step then try increasing the length for that column from datastore and use substr in the mapping expression.Hi Bhabani,
You are right.It is for Loading SrcSet0 Load data.I have increased the column length for target table data store
and then apply the substring function but it results the same.
If you wanted to say to increase the length for source file data store then please tell me which length ?Physical length or
logical length?
Thanks
Anindya

Rikaichan (add-on) doesn't work at my office. It gives this error "Javascript application: the index for one or more dictionaries needs to be created. This may take a while on slower computers". And then the PC freezes. What should I do?

I'm using Firefox 3.6.17, and have installed Rikaichan 2.02. Once I've installed the Japanese-English dictionary, I then click on Rikaichan to get it started, and it always gives a "Javascript Application" error:
'''"The index for one or more dictionaries needs to be created. This may take a while on slower computers"'''
Rikaichan always works fine on my laptop, but I just can't seem to install it properly at work. Is there some sort of office security screwing it up?

venicespent,
Boot into your Mavericks Recovery partition by hold down the command and R keys whilst booting. You'll see a screen that looks like this:
Click on the Disk Utility item to open Disk Utility. You should see your boot drive (usually named "Macintosh HD" unless you've changed it) in the column on the left of the screen. Select your boot partition and click on the "Verify" button. Let your Mac do it's thing - if you get green text telling you that everything seems to be OK, then your disk should not be damaged. If, however, you get red text telling you that the disk needs to be repaired, click on the "Repair" button. If the disk can be repaired, you should be good to go. If the disk cannot be repaired then the drive is damaged.
But before you do anything, make certain that you have backups!!!
Clinton
MacBook Pro (15-inch Late 2011), OS Mavericks 10.9.4, 16GB RAM, 960GB SSD, 27” Apple Thunderbolt Display

Error: ORA-16766: Redo Apply unexpectedly offline

I am trying to start DataGuard, but I am getting a 'Error: ORA-16766: Redo Apply unexpectedly offline' error when I do a 'show database verbose' on my standby database (the primary is fine). I do a 'alter database recover managed standby database disconnect from session;', but I am still getting the same error. Both databases are 10.2.0.4. Any ideas? Thanks a lot.

Did you check the standby alert log ?
If you are using dataguard broker you should not be manually starting recovery.
Did you try :-
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;

Error: ORA-16778: redo transport error for one or more databases. please help.

Similar Messages

Maybe you are looking for