Error question element8

I finished my vedio settings and all the things
and then I kicked the Disc of Share...
however it was making the disc file...
everything was okay but until lastly it showed the "device error - the target device isn't suitable for use"
why did it happen and how can I solve it?
Please someone that can help me... Thanks

Along with the linked FAQ entry, that Steve provided, this ARTICLE might give you some tips on getting the best burn. For some tips on disc brand choice and playability (can also greatly affect the burning), this ARTICLE will help. I also recommend that one turn OFF all Energy Management, Screen Savers, and even active Anti-Virus and Spyware Sweepers, as they can affect the computer's access to the burner and the blank disc.
There are three things that happen, when one chooses to burn a disc:
1.) the Timeline is Transcoded to MPEG-2 for the DVD construction. This is a two-pass process (100% is equal to two passes of the Timeline to get the best Transcoding possible).
2.) the structure of the DVD (VIDEO_TS folder and the IFO, BUP and VOB files) is created.
3.) then the physical Burn is started. This is the last and really the shortest part of the entire process.
Good luck,
Hunt

Similar Messages

  • Why doesnt itunes let me restore my ipohne 4 it gives me a error question saying cannot restore.

    Why doesnt itunes let me restore my ipohne 4 it gives me a error question saying cannot restore.

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • Disk0s2 error questions

    Alright, so I have heard about this error, and one of my friends got it today.
    The problem started out as "my computer won't load and has the spinning gear". I then told her to boot in Safe Mode, but it would continuously load. Should it take 2 hours for it to boot? I don't think so...but maybe I am wrong.
    Since that fails, Apple says to boot into single user mode, which is fine. Put in my /sbin/fsck -fy command, and let it do it's thing. Then we see that error.
    So, here are my questions. Note I have my own copies of the grey installation disk, but she does not have hers.
    * Pertaining to the 5-step checkup by running /fsck -fy, how long should this take? It got all the way up to Invalid Record Count (4, 4xxx), with 2 lines of disk0s2 and Invalid Node every now and then. It seems to be stuck/slow on step 4.
    * Is it safe to use my startup/installation disk solely for running Disk Utility? I am almost sure this is due to bad permissions, or simply a bad hard drive.
    * Would Target Disk Mode help? We both have Macs and I know about that feature, but since we don't have a Firewire 800 cable, can't do this. My mac is fine (better repair my permissions!)
    * Any other further steps that can be taken? She is visiting an Apple Store this weekend, so I am merely curious as to what can be done.
    Macbook Specs:
    2010 Macbook Pro 13'
    OS X Snow Leopard (unsure of which version, but I would say 10.6.3,5,7 or 8)

    xtremecarbon wrote:
    I have heard about this error
    What error?
    Invalid Record Count (4, 4xxx), with 2 lines of disk0s2 and Invalid Node every now and then. It seems to be stuck/slow on step 4.
    Disk directory disk0s2 is damaged. Can't tell what disk that is (this is dynamic identifier), but, if you're running SL, in all likelihood that's the 2nd partition (slice) of the internal disk, ie, main partition on the internal disk.
    You can try to (a) boot from an alternate device (eg, Install DVD or ext'l drive) and attempt to fix the problem with Disk Utility, (b) rebuild the disk directory with DiskWarrior, (c) boot from an alternate device, reformat the disk (which will destroy everything currently on it) and restore everything from the backup. In any event, if you don't have a backup, you're in trouble. Pray.
    Is it safe to use my startup/installation disk solely for running Disk Utility?
    To verify or repair the disk? Yes.
    I am almost sure this is due to bad permissions
    Nothing whatever to do with permissions.
    Would Target Disk Mode help?
    No. Can't be used if you can't boot the Mac from the int'l drive.
    Any other further steps that can be taken?
    If there is a current backup, no. If there isn't, boot from an alternate device and try to copy as much data which hasn't been backed up as possible. The Apple Store does not do data recovery.

  • OWB Process Flow - Transition Warinig OR Error - Question

    Hi all,
    I have a question. In a Simple Process Flow I have:
    Start -> Mapping -> Warning -> Email
    -> Erro -> Email
    ->Sucess - End
    Is necessary use 3 Transition ?
    Can I do only 2 Transition like
    Start -> Mapping -> Warning OR Error -> Email
    ->Sucess - End
    How can I do "Warning OR Error" on a Transition?
    If i put any condition on the Transition:
    Start -> Mapping -> Email
    ->Sucess - End
    It means
    Start -> Mapping -> Warning OR Error -> Email
    ->Sucess - End
    Thanks

    If i put any condition on the Transition:
    Start -> Mapping -> Email
    ->Sucess - End
    It means
    Start -> Mapping -> Warning OR Error -> Email
    ->Sucess - End
    it exactly what you need
    Edited by: hungsao on Oct 17, 2012 9:10 PM

  • Procedure Syntax Error Question

    Hi all, new here but working on an intro database application project and am getting stuck on this procedure, any feedback would be greatly appreciated
    create or replace procedure "PROJ_NEW_TRANSACTION"
    (arg_transid IN NUMBER,
    arg_totalcost IN NUMBER,
    arg_pmtmethod IN VARCHAR2,
    arg_amtpaid IN NUMBER,
    arg_register IN NUMBER,
    arg_customer IN NUMBER)
    is
    ws_availcash number;
    insufficient_change exception;
    begin
    SELECT avail_cash into ws_availcash FROM proj_register WHERE arg_register = reg_id;
    IF (arg_amtpaid - arg_totalcost) > ws_availcash
    THEN raise insufficient_change;
    END IF;
    INSERT into proj_transaction values (arg_transid, arg_totalcost, arg_pmtmethod, arg_amptpaid, arg_register, arg_customer);
    EXCEPTION
    WHEN insufficient_change THEN
    raise_application_error(-20000, 'Insufficient change in register');
    end;
    This is the syntax to the procedure, I have 3 tables (proj_transaction, proj_customer, proj_register) and am trying to get this procedure to ensure there is enough change in the register, and if not raise the exception and display the message indicated. I have to add more aspects to the procedure later, but I need to know why this isn't working. I keep getting the errors (Line 19, Position 81, PL/SQL: ORA-00984: column not allowed here) and (Line 19, Position 1, PL/SQL: SQL Statement ignored) -- Line 19 starts with the INSERT statement
    These are the tables I am using:
    create table proj_transaction
    (trans_id      number(3) primary key,
    total_cost      number(6,2) not null,
    pmt_method      varchar2(6) check(pmt_method in('Cash', 'Credit')),
    amt_paid     number(6,2) not null,
    register     number(3) references proj_register(reg_id),
    customer     number(3) references proj_customer(cust_id));
    create table proj_register
    (reg_id      number(3) primary key,
    avail_cash     number(6,2) not null,
    accounts_rec     number(6));
    create table proj_customer
    (cust_id     number(3) primary key,
    money_amt      number(6,2),
    cust_name     varchar(15));

    Welcome to the OTN forums.
    As advice for a new user, please do not duplicate posts. {thread:id=2220607}
    And this question is better placed in the {forum:id=75} forum. Please try to get a feel for the different forums and their typical topics/discussions.
    If you had looked up the error message, you would have found:
    >
    ORA-00984 column not allowed here
    Cause: A column name was used in an expression where it is not permitted, such as in the VALUES clause of an INSERT statement.
    Action: Check the syntax of the statement and use column names only where appropriate.

  • Bayes Error Question after Spamassassin Upgrade

    I have just upgraded to Version 3.1.5 of the Spamassassin and I am getting the following readout when after I run spamassassin -D --lint
    xserve1:/var/amavis root# spamassassin -D --lint
    [18757] dbg: logger: adding facilities: all
    [18757] dbg: logger: logging level is DBG
    [18757] dbg: generic: SpamAssassin version 3.1.5
    [18757] dbg: config: score set 0 chosen.
    [18757] dbg: util: running in taint mode? yes
    [18757] dbg: util: taint mode: deleting unsafe environment variables, resetting PATH
    [18757] dbg: util: PATH included '/bin', keeping
    [18757] dbg: util: PATH included '/sbin', keeping
    [18757] dbg: util: PATH included '/usr/bin', keeping
    [18757] dbg: util: PATH included '/usr/sbin', keeping
    [18757] dbg: util: final PATH set to: /bin:/sbin:/usr/bin:/usr/sbin
    [18757] dbg: message: ---- MIME PARSER START ----
    [18757] dbg: message: main message type: text/plain
    [18757] dbg: message: parsing normal part
    [18757] dbg: message: added part, type: text/plain
    [18757] dbg: message: ---- MIME PARSER END ----
    [18757] dbg: dns: is Net::DNS::Resolver available? yes
    [18757] dbg: dns: Net::DNS version: 0.59
    [18757] dbg: diag: perl platform: 5.008006 darwin
    [18757] dbg: diag: module installed: Digest::SHA1, version 2.10
    [18757] dbg: diag: module installed: Archive::Tar, version 1.30
    [18757] dbg: diag: module installed: IO::Zlib, version 1.04
    [18757] dbg: diag: module installed: DB_File, version 1.814
    [18757] dbg: diag: module installed: HTML::Parser, version 3.36
    [18757] dbg: diag: module installed: MIME::Base64, version 3.05
    [18757] dbg: diag: module installed: Net::DNS, version 0.59
    [18757] dbg: diag: module installed: Net::SMTP, version 2.29
    [18757] dbg: diag: module installed: Mail::SPF::Query, version 1.999001
    [18757] dbg: diag: module installed: IP::Country::Fast, version 604.001
    [18757] dbg: diag: module installed: Razor2::Client::Agent, version 2.82
    [18757] dbg: diag: module installed: Net::Ident, version 1.20
    [18757] dbg: diag: module not installed: IO::Socket::INET6 ('require' failed)
    [18757] dbg: diag: module installed: IO::Socket::SSL, version 1.0
    [18757] dbg: diag: module installed: Time::HiRes, version 1.68
    [18757] dbg: diag: module installed: DBI, version 1.52
    [18757] dbg: diag: module installed: Getopt::Long, version 2.34
    [18757] dbg: diag: module installed: LWP::UserAgent, version 2.033
    [18757] dbg: diag: module installed: HTTP::Date, version 1.47
    [18757] dbg: ignore: using a test message to lint rules
    [18757] dbg: config: using "/etc/mail/spamassassin" for site rules pre files
    [18757] dbg: config: read file /etc/mail/spamassassin/init.pre
    [18757] dbg: config: read file /etc/mail/spamassassin/v310.pre
    [18757] dbg: config: read file /etc/mail/spamassassin/v312.pre
    [18757] dbg: config: using "/usr/local/share/spamassassin" for sys rules pre files
    [18757] dbg: config: using "/usr/local/share/spamassassin" for default rules dir
    [18757] dbg: config: read file /usr/local/share/spamassassin/10_misc.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_advance_fee.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_anti_ratware.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_body_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_compensate.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_dnsbl_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_drugs.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_fake_helo_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_head_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_html_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_meta_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_net_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_phrases.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_****.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_ratware.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/20_uri_tests.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/23_bayes.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_accessdb.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_antivirus.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_body_tests_es.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_body_tests_pl.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_dcc.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_dkim.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_domainkeys.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_hashcash.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_pyzor.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_razor2.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_replace.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_spf.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_textcat.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/25_uribl.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/30_text_de.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/30_text_fr.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/30_text_it.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/30_text_nl.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/30_text_pl.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/30_text_pt_br.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/50_scores.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/60_awl.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_dk.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_dkim.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_spf.cf
    [18757] dbg: config: read file /usr/local/share/spamassassin/60_whitelist_subject.cf
    [18757] dbg: config: using "/etc/mail/spamassassin" for site rules dir
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_adult.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_bayes_poison_nxm.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_evilnum0.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_evilnum1.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_evilnum2.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_html.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_obfu.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_oem.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_random.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sare_stocks.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/70_sc_top200.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/99_FVGT_Tripwire.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/Chinese_rules.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/local.cf
    [18757] dbg: config: read file /etc/mail/spamassassin/weeds.cf
    [18757] dbg: config: using "/private/var/root/.spamassassin/user_prefs" for user prefs file
    [18757] dbg: config: read file /private/var/root/.spamassassin/user_prefs
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::URIDNSBL from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::Hashcash from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::Hashcash=HASH(0x1c828d8)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::SPF from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::SPF=HASH(0x1d91a64)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::Pyzor from @INC
    [18757] dbg: pyzor: network tests on, attempting Pyzor
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::Pyzor=HASH(0x1c66f5c)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::Razor2 from @INC
    [18757] dbg: razor2: razor2 is available, version 2.82
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::Razor2=HASH(0x466db0)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::SpamCop from @INC
    [18757] dbg: reporter: network tests on, attempting SpamCop
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::SpamCop=HASH(0x468e68)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::AWL from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::AWL=HASH(0x1dd02d0)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::AutoLearnThreshold from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::AutoLearnThreshold=HASH(0x1e34100)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::WhiteListSubject from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::WhiteListSubject=HASH(0x1e36be0)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::MIMEHeader from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::MIMEHeader=HASH(0x1e39d30)
    [18757] dbg: plugin: loading Mail::SpamAssassin::Plugin::ReplaceTags from @INC
    [18757] dbg: plugin: registered Mail::SpamAssassin::Plugin::ReplaceTags=HASH(0x1e3e260)
    [18757] dbg: config: adding redirector regex: /^http:\/\/chkpt\.zdnet\.com\/chkpt\/\w+\/(.*)$/i
    [18757] dbg: config: adding redirector regex: /^http:\/\/www(?:\d+)?\.nate\.com\/r\/\w+\/(.*)$/i
    [18757] dbg: config: adding redirector regex: /^http:\/\/.+\.gov\/(?:.*\/)?externalLink\.jhtml\?.*url=(.*?)(?:&.*)?$/i
    [18757] dbg: config: adding redirector regex: /^http:\/\/redir\.internet\.com\/.+?\/.+?\/(.*)$/i
    [18757] dbg: config: adding redirector regex: /^http:\/\/(?:.*?\.)?adtech\.de\/.*(?:;|\|)link=(.*?)(?:;|$)/i
    [18757] dbg: config: adding redirector regex: m'^http.*?/redirect\.php\?.*(?<=[?&])goto=(.*?)(?:$|[&\#])'i
    [18757] dbg: config: adding redirector regex: m'^https?:/*(?:[^/]+\.)?emf\d\.com/r\.cfm.*?&r=(.*)'i
    [18757] dbg: config: adding redirector regex: m'/(?:index.php)?\?.*(?<=[?&])URL=(.*?)(?:$|[&\#])'i
    [18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/url\?.*?(?<=[?&])q=(.*?)(?:$|[&\#] )'i
    [18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/search\?.*?(?<=[?&])q=[^&]*?(?<=%2 0|..[=+\s])site:(.*?)(?:$|%20|[\s+&\#])'i
    [18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/search\?.*?(?<=[?&])q=[^&]*?(?<=%2 0|..[=+\s])(?:"|%22)(.*?)(?:$|%22|["\s+&\#])'i
    [18757] dbg: config: adding redirector regex: m'^http:/*(?:\w+\.)?google(?:\.\w{2,3}){1,2}/translate\?.*?(?<=[?&])u=(.*?)(?:$ |[&\#])'i
    [18757] warn: config: failed to parse line, skipping: scare RCVD_IN_NJABL_SPAM 3.0
    [18757] dbg: plugin: Mail::SpamAssassin::Plugin::ReplaceTags=HASH(0x1e3e260) implements 'finish_parsing_end'
    [18757] dbg: replacetags: replacing tags
    [18757] dbg: replacetags: done replacing tags
    [18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
    [18757] dbg: config: score set 1 chosen.
    [18757] dbg: message: ---- MIME PARSER START ----
    [18757] dbg: message: main message type: text/plain
    [18757] dbg: message: parsing normal part
    [18757] dbg: message: added part, type: text/plain
    [18757] dbg: message: ---- MIME PARSER END ----
    [18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
    [18757] dbg: dns: name server: 209.198.128.11, family: 2, ipv6: 0
    [18757] dbg: dns: testing resolver nameservers: 209.198.128.11, 209.198.128.27
    [18757] dbg: dns: trying (3) google.com...
    [18757] dbg: dns: looking up NS for 'google.com'
    [18757] dbg: dns: NS lookup of google.com using 209.198.128.11 succeeded => DNS available (set dns_available to override)
    [18757] dbg: dns: is DNS available? 1
    [18757] dbg: metadata: X-Spam-Relays-Trusted:
    [18757] dbg: metadata: X-Spam-Relays-Untrusted:
    [18757] dbg: metadata: X-Spam-Relays-Internal:
    [18757] dbg: metadata: X-Spam-Relays-External:
    [18757] dbg: message: no encoding detected
    [18757] dbg: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0) implements 'parsed_metadata'
    [18757] dbg: uridnsbl: domains to query:
    [18757] dbg: dns: checking RBL sbl-xbl.spamhaus.org., set sblxbl-lastexternal
    [18757] dbg: dns: checking RBL sa-accredit.habeas.com., set habeas-firsttrusted
    [18757] dbg: dns: checking RBL sbl-xbl.spamhaus.org., set sblxbl
    [18757] dbg: dns: checking RBL sa-other.bondedsender.org., set bsp-untrusted
    [18757] dbg: dns: checking RBL combined.njabl.org., set njabl-lastexternal
    [18757] dbg: dns: checking RBL combined.njabl.org., set njabl
    [18757] dbg: dns: checking RBL combined-HIB.dnsiplists.completewhois.com., set whois
    [18757] dbg: dns: checking RBL list.dsbl.org., set dsbl-lastexternal
    [18757] dbg: dns: checking RBL bl.spamcop.net., set spamcop
    [18757] dbg: dns: checking RBL sa-trusted.bondedsender.org., set bsp-firsttrusted
    [18757] dbg: dns: checking RBL combined-HIB.dnsiplists.completewhois.com., set whois-lastexternal
    [18757] dbg: dns: checking RBL dnsbl.sorbs.net., set sorbs-lastexternal
    [18757] dbg: dns: checking RBL dnsbl.sorbs.net., set sorbs
    [18757] dbg: dns: checking RBL iadb.isipp.com., set iadb-firsttrusted
    [18757] dbg: check: running tests for priority: 0
    [18757] dbg: rules: running header regexp tests; score so far=0
    [18757] dbg: rules: ran header rule __HAS_MSGID ======> got hit: "<"@lint_rules>"
    [18757] dbg: rules: ran header rule NO_REAL_NAME ======> got hit: "[email protected]
    [18757] dbg: rules: "
    [18757] dbg: rules: ran header rule __MSGID_OK_DIGITS ======> got hit: "1159381766"
    [18757] dbg: spf: no suitable relay for spf use found, skipping SPF-helo check
    [18757] dbg: eval: all '*From' addrs: [email protected]
    [18757] dbg: eval: all '*To' addrs:
    [18757] dbg: spf: no suitable relay for spf use found, skipping SPF check
    [18757] dbg: rules: ran eval rule NO_RELAYS ======> got hit
    [18757] dbg: spf: cannot get Envelope-From, cannot use SPF
    [18757] dbg: spf: def_spf_whitelist_from: could not find useable envelope sender
    [18757] dbg: rules: ran eval rule __UNUSABLE_MSGID ======> got hit
    [18757] dbg: spf: spf_whitelist_from: could not find useable envelope sender
    [18757] dbg: rules: ran eval rule MISSING_HEADERS ======> got hit
    [18757] dbg: rules: running body-text per-line regexp tests; score so far=3.188
    [18757] dbg: rules: ran body rule __NONEMPTY_BODY ======> got hit: "I"
    [18757] dbg: uri: running uri tests; score so far=3.188
    [18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
    [18757] dbg: bayes: not scoring message, returning undef
    [18757] dbg: bayes: opportunistic call attempt failed, DB not readable
    [18757] dbg: rules: running raw-body-text per-line regexp tests; score so far=3.188
    [18757] dbg: rules: running full-text regexp tests; score so far=3.188
    [18757] dbg: info: entering helper-app run mode
    [18757] dbg: info: leaving helper-app run mode
    [18757] dbg: razor2: part=0 engine=4 contested=0 confidence=0
    [18757] dbg: razor2: results: spam? 0
    [18757] dbg: razor2: results: engine 8, highest cf score: 0
    [18757] dbg: razor2: results: engine 4, highest cf score: 0
    [18757] dbg: util: current PATH is: /bin:/sbin:/usr/bin:/usr/sbin
    [18757] dbg: pyzor: pyzor is not available: no pyzor executable found
    [18757] dbg: pyzor: no pyzor found, disabling Pyzor
    [18757] dbg: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0) implements 'check_tick'
    [18757] dbg: check: running tests for priority: 500
    [18757] dbg: plugin: Mail::SpamAssassin::Plugin::URIDNSBL=HASH(0x18796d0) implements 'check_post_dnsbl'
    [18757] dbg: rules: running meta tests; score so far=3.188
    [18757] info: rules: meta test DIGEST_MULTIPLE has undefined dependency 'DCC_CHECK'
    [18757] info: rules: meta test SARE_OBFU_CIALIS has undefined dependency 'SARE_OBFU_CIALIS2'
    [18757] info: rules: meta test FP_MIXED_****3 has undefined dependency 'FP_PENETRATION'
    [18757] dbg: rules: running header regexp tests; score so far=4.666
    [18757] dbg: rules: running body-text per-line regexp tests; score so far=4.666
    [18757] dbg: uri: running uri tests; score so far=4.666
    [18757] dbg: rules: running raw-body-text per-line regexp tests; score so far=4.666
    [18757] dbg: rules: running full-text regexp tests; score so far=4.666
    [18757] dbg: check: running tests for priority: 1000
    [18757] dbg: rules: running meta tests; score so far=4.666
    [18757] dbg: rules: running header regexp tests; score so far=4.666
    [18757] dbg: config: using "/private/var/root/.spamassassin" for user state dir
    [18757] dbg: locker: safe_lock: created /private/var/root/.spamassassin/auto-whitelist.lock.xserve1.topequip.com.18757
    [18757] dbg: locker: safe_lock: trying to get lock on /private/var/root/.spamassassin/auto-whitelist with 0 retries
    [18757] dbg: locker: safe_lock: link to /private/var/root/.spamassassin/auto-whitelist.lock: link ok
    [18757] dbg: auto-whitelist: tie-ing to DB file of type DB_File R/W in /private/var/root/.spamassassin/auto-whitelist
    [18757] dbg: auto-whitelist: db-based [email protected]|ip=none scores 0/0
    [18757] dbg: auto-whitelist: AWL active, pre-score: 4.666, autolearn score: 4.666, mean: undef, IP: undef
    [18757] dbg: auto-whitelist: DB addr list: untie-ing and unlocking
    [18757] dbg: auto-whitelist: DB addr list: file locked, breaking lock
    [18757] dbg: locker: safe_unlock: unlink /private/var/root/.spamassassin/auto-whitelist.lock
    [18757] dbg: auto-whitelist: post auto-whitelist score: 4.666
    [18757] dbg: rules: running body-text per-line regexp tests; score so far=4.666
    [18757] dbg: uri: running uri tests; score so far=4.666
    [18757] dbg: rules: running raw-body-text per-line regexp tests; score so far=4.666
    [18757] dbg: rules: running full-text regexp tests; score so far=4.666
    [18757] dbg: check: is spam? score=4.666 required=2
    [18757] dbg: check: tests=MISSING_HEADERS,MISSING_SUBJECT,NO_REAL_NAME,NO_RECEIVED,NO_RELAYS,TO_CC_ NONE
    [18757] dbg: check: subtests=__HAS_MSGID,__MSGID_OK_DIGITS,__MSGID_OK_HOST,__NONEMPTY_BODY,__SANE_M SGID,__UNUSABLE_MSGID
    [18757] warn: lint: 1 issues detected, please rerun with debug enabled for more information
    I am concerned with the following -
    [18757] dbg: bayes: no dbs present, cannot tie DB R/O: /private/var/root/.spamassassin/bayes_toks
    [18757] dbg: bayes: not scoring message, returning undef
    [18757] dbg: bayes: opportunistic call attempt failed, DB not readable
    I know that I have a failure with the IO::Socket::INET6 also.
    I am also not getting (never have gotten) the BAYES tag when I look at the Raw Source on Spam Emails. I am assuming that error above could be the issue.
    Any help on this would be greatly appreciated. I love this discussion group and it has helped me out of a bind more than once!
    Thanks in advance for your time.
    G5 Power Mac   Mac OS X (10.4.7)  

    Latest news!
    I just looked at a spam email and I see that it is tagged here is the info
    X-Spam-Status: No, hits=-1.827 tagged_above=-999 required=2 tests=BAYES_00,
    DIET_1
    Now I am still concerned about the error I listed above about the Bayes DB. Any help would be great.

  • ITunes 7 Unknown Error question.

    http://docs.info.apple.com/article.html?artnum=304318
    I have been using that document to help me solve this problem, but when I try to disable Safemode in Quicktime, after I close the window, the button checks itself, even after I hit apply, so I go back and uncheck it again, and it reverts itself. I think this is the problem, because I've tried option 2 and it still doesn't work. Any ideas?
    Dell Demension 5100   Windows XP  

    "The iTunes application could not be opened. An unknown error occurred (-200)."
    the -200 is caused by a problem with your QuickTime. (iTunes needs a fully functional QuickTime in order to work properly.)
    the first thing we'll try is a careful standalone QT 7.1.3 reinstall.
    download and save a copy of the QT 7.1.3 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1.3 Installers … get the one that doesn’t mention itunes
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

  • Another 2048 error question

    I have Windows XP Pro and the latest version of Quicktime.
    Recently I recorded a video with my Pentax Optio W20 video camera which records in *.MOV format. The video plays on the camera with sound no problem. I copied the video from the SD Card to my harddisk and when I try to view the video with Quicktime I get:
    "Error -2048: Couldn't open the file xxxxxx.mov because it is not a file that QuickTime understands."
    I emailed the file to my buddy and the file plays without issue on his laptop (WinXP). So the file is a working file and is not corrupt or missing anything.
    I've searched on this site and others and it seems this is a common issue when someone is trying to play a different file format with QuickTime, however this is a *.MOV flie! It should play without issue. What gives? HELP!
    --Z

    Here is my second plea for help.
    I have since taken the files to a post production house and they also cannot open the larger ones. they say the pc has a 2 gig limit. Is this true? why is this not documented.
    if no one can answer the above, perhaps someone can be so kind to tell me where I can get an answer if not on this forum. thanks!

  • Discoverer error question

    Hi,
    I had a Discoverer user receive the following error message when trying to log into Discoverer. The user waited for a while and then was able to log in. I suspect his Java might be corrupted but I wanted to see if there was anything else I should look at
    "Unable to connect to the Discoverer server: null. Please contract your Oracle Application server administrator."
    Thanks,
    Carlos

    Hi
    While Java could be a cause I think it is highly unlikely. More likely you could have had a network issue or the server was temporarilly unavailable.
    Michael

  • html:errors question

    I have a JSP file,and I use <html:errors> in this page,but it raise error,my code is follows:
    <%@ taglib uri="/WEB-INF/struts-form.tld" prefix="html" %>
    <html>
    <head>
    <link rel="stylesheet" href="style.css" type="text/css">
    </head>
    <html:errors/>
    <html:form method="post" action="log.do">
    <html:text property="abc" /><html:errors property="abc"/>
    </html:form> and my Form is follows:
    public ActionErrors validate(ActionMapping mapping,HttpServletRequest request) {
    ActionErrors errors = new ActionErrors();       
    if(abc!=null && abc.length()>0){
       errors.add("abc",new ActionError(" error.abc.required"));
    return errors;
    } When I run it,it raise following error:
    org.apache.jasper.JasperException: /index.jsp(8,15) Attribute property invalid for tag errors according to TLD
    org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:510)
    org.apache.jasper.servlet.JspServletWrapper.service (JspServletWrapper.java:375)
    org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
    org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
    javax.servlet.http.HttpServlet.service(HttpServlet.java :802)
    org.apache.struts.action.ActionServlet.processValidate(ActionServlet.java:2149)
    org.apache.struts.action.ActionServlet.process(ActionServlet.java:1565)
    org.apache.struts.action.ActionServlet.doPost(ActionServlet.java :510)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
    javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    I have looked up <html:errors> API,I find it have property attribute:
    property Name of the property for which error messages should be displayed. If not specified, all error messages (regardless of property) are displayed. (RT EXPR)
    Why raise above error when I use <html:errors property="abc"/> ? How to do with it?
    Thanks in advance!

    Maybe this piece of code might help you
    <tr>
    <td align="center"><logic:messagesPresent>
    <html:messages id="error">
    <span id="error"><li><%=error%></li></span>
    </html:messages>
    </logic:messagesPresent>
    <span id="error"><c:out value="${errorsNolog}"/></span>
    </td>
    </tr>

  • Another Data Rate Too High Error Question

    Hi all,
    I have seen quite a few posts about pgc errors, but most of them deal with slideshows and not video; and I can't find anything with the REF=KApgc error.
    I'm just putting all of my home movies onto an authored DVD, not rocket science.  I'm using the 'Film Submenu' preset with only 5 main movies, things like Easter, Birthday, etc.  My transition for each button is a slate (for lack of a better word) that says exactly what it is and when it happened, before each movie plays.
    After I had everything set up, I realized I didn't have an ability to "play all" that would include these slates.  Simple solution, make a 'play all' button that links to a timeline that has everything in it - the slate, then the movie, next slate, next movie and so on.  (When I say movie - they are all .mov files rendered out from After Effects, even the slates)
    My transcode settings are NTSC DV High Quality 7mb VBR 2 Pass and the "maximum quality" box is checked.
    When I run the 'Check Disc' all is fine.  Preview the disc, all is fine.
    Build Disc: Hours of Transcoding then the error: Data Rate Too High at *timecode* REF=KApgc.
    When this movie is by itself with a button click, it's fine.  It's only in the "play all" timeline that it produces the error.
    If the data rate isn't too high in one place, why is it too high in another?  It's the same thing, just a longer timeline.
    Please Help!
    Thanks.

    Thanks Jeff,
    I feel kind of silly for not thinking of that as a solution to my play all dilemma.  That's why you're the expert I guess.
    A better solution would be to create a playlist of all of your other timelines; that way, only one copy of each gets burned to disc.
    Hopefully the "data rate" error will go away with these changes.
    -Jeff
    Can I place my slates that are just assets (.mov) in the playlist or can I only put timelines in there?
    Thanks again,
    -Jim

  • BAPI_INCOMINGINVOICE_CREATE - a rolling back errors question

    I  need to use this BAPI to create an invoice and a credit memo against the same purchase order in one 'hit'.  If the second call to the BAPI fails, I  want to rollback both sets of changes.  IIt's been fixed in my mind for a while now that this is not  possible.; that if you call  this BAPI  you have to complete the process by committing or rolling back  the changes before calling it  a second time.  However, I've done a bit of testing and doing the commit / rollback after the second call seems to be working fine. 
    Has anyone else done this sort of thing successfully in Production?   I don't  want  to tell them  that it is possible and make them really happy and  then find out that I was wrong.

    I have a similar scenario with BAPI_ACC_DOCUMENT_POST, where two or even four postings need to be made successfully or none at all. The rollback is actually a very rare case in production, but it was tested quite a bit beforehand with forced errors and always worked as desired.
    As you know, it works only as long as the BAPI does not have a commit work inside (they should not if programmed properly).
    Thomas

  • Runtime error -  question for experts

    hello  experts,
    I was trying to debug a program for unicode compatibility, and when I finally thought I had finished it.
    This runtime error shows up
    "Error analysis                                                                                |
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_READ_SRC_LINE_TOO_LONG', was
    not caught in
    procedure "K_KKB_FIELDCAT_MERGE" "(FUNCTION)", nor was it propagated by a
    RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    There was an attempt to read program "ZPM04_UPDATE_INFOREC_FROM_PO" from the
    database.
    The READ REPORT statement allows you to copy a program text into an
    internal table. The occupied line length in the program text must not
    exceed the width of the internal table.
    The internal table "\FUNCTION=K_KKB_FIELDCAT_MERGE\DATA=L_ABAP_SOURCE[]" is 72
    characters wide. The program line is
    |    78 characters wide."
    because the error occured in standard SAP programs, I am at loss..
    Please give your suggestions.
    Goldie.

    You need to Change the setting in the program ZPM04_UPDATE_INFOREC_FROM_PO, not in the program SAPLSBKH.
    SAPLSBKH read the Report ZPM04_UPDATE_INFOREC_FROM_PO and it gets error because some lines in the ZPM04_UPDATE_INFOREC_FROM_PO are longer than 72 characters.
    As suggested by other SDN members you have to follow this steps:
    Go to SE38.
    Enter ZPM04_UPDATE_INFOREC_FROM_PO and change.
    Utilities > Setting
    In the Editor Tab, set the checkbox "Downword Compatilbe line Length (72)". You can find out this checkbox in the last section of the Editor tab.
    Press Enter.
    In the Pop-Up, Say "YES" for the line breaks.
    Regards,
    Naimesh Patel

  • Browser compatibility error question by new user

    I''m a new user of CS4, first full website, and am receiving an error that apparently will effect almost every browser (figures!) The error message reads: "Found 1 errors in twoColFixLtHdr.css." The error message refers to line 8. My site is under construction so I'm including the page of code that goes with the error and am editing line 8 to red to identify.
    I do appreciate any assistance someone can provide me with. Thank you!
    <-- InstanceBegin template="/Templates/index.dwt" codeOutsideHTMLIsLocked="false" -->
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <!-- InstanceBeginEditable name="doctitle" -->
    <title>Prayer Echoes-Home</title>
    <!-- InstanceEndEditable -->
    <link href="twoColFixLtHdr.css" rel="stylesheet" type="text/css" /><!--[if IE 5]>
    <style type="text/css">
    /* place css box model fixes for IE 5* in this conditional comment */
    .twoColFixLtHdr #sidebar1 { width: 230px; }
    </style>
    <![endif]--><!--[if IE]>
    <style type="text/css">
    /* place css fixes for all versions of IE in this conditional comment */
    .twoColFixLtHdr #sidebar1 { padding-top: 30px; }
    .twoColFixLtHdr #mainContent { zoom: 1; }
    /* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
    </style>
    <![endif]-->
    <style type="text/css">
    <!--
    body {
    background-color: #FFF;
    border-top-width: thin;
    border-bottom-width: thin;
    border-top-style: outset;
    border-right-style: none;
    border-bottom-style: outset;
    border-left-style: none;
    border-top-color: #996;
    border-right-color: #FFF;
    border-bottom-color: #996;
    border-left-color: #FFF;
    -->
    </style>
    <script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
    <link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
    <style type="text/css">
    <!--
    a:link {
    color: #7D4177;
    text-decoration: none;
    a:visited {
    text-decoration: none;
    color: #7D4177;
    a:hover {
    text-decoration: underline;
    color: #330;
    a:active {
    text-decoration: none;
    color: #F00;
    #MenuBarText {
    position:absolute;
    left:124px;
    top:641px;
    width:211px;
    height:318px;
    z-index:1;
    visibility: visible;
    overflow: visible;
    font-family: Verdana, Arial, Helvetica, sans-serif;
    background-color: #FFF;
    border-top-color: #FFF;
    border-right-color: #FFF;
    border-bottom-color: #FFF;
    border-left-color: #FFF;
    text-align: left;
    -->
    </style>
    <!-- InstanceBeginEditable name="head" -->
    <style type="text/css">
    <!--
    a:visited {
    color: #7D4177;
    a:active {
    color: #F30;
    -->
    </style><!-- InstanceEndEditable -->
    </head>
    <body class="twoColFixLtHdr">
    <div id="MenuBarText">
      <p> </p>
    </div>
    <div id="container">
      <div id="header"><h1><a href="http://www.prayerechoes.com/"><img src="images/prayer-echoes-logo.jpg" alt="Prayer Echoes logo" width="365" height="100" hspace="5" vspace="5" border="0" /></a><img src="images/prayer-echoes-slogan.jpg" alt="Prayer Echoes slogan" width="400" height="100" hspace="25" vspace="5" /></h1>
        <!-- InstanceBeginEditable name="Header Navigation Bar" -->
        <div class="headernavtext" id="headernavbar"><a href="http://www.prayerechoes.com/">HOME</a> | <a href="aboutus.html">ABOUT US</a> |<a href="feedback.html">CONTACT US</a> | <a href="faq.html">FAQ</a> | <a href="mission.html">MISSION</a> | <a href="policies.html">POLICIES</a> | <a href="testimonials.html">TESTIMONIALS</a> | <a href="sitemap.html">SITE MAP</a></div>
      <!-- InstanceEndEditable --></div>
      <div id="sidebar1">
          <ul id="MenuBar1" class="MenuBarVertical">
            <li><a href="http://www.prayerechoes.com/">Home</a></li>
            <li><a href="airprayer.html">Air Prayer</a></li>
            <li><a href="earthprayer.html">Earth Prayer</a></li>
            <li><a href="universeprayer.html">Universe Prayer</a></li>
            <li><a href="frames.html"> Frames</a></li>
            <li><a href="prayers.html">Prayers</a></li>
            <li><a href="prayerechoselect.html">Choose Prayer Echo</a></li>
            <li><a href="feedback.html">Contact Us</a></li>
            <li><a href="sitemap.html">Site Map</a></li>
          </ul>
      </div>
      <div id="mainContent">
        <h1 class="titletext"><!-- InstanceBeginEditable name="Page Title" -->
          <p><span class="maintitlegreen">Welcome to Prayer Echoes</span></p>
        <!-- InstanceEndEditable --></h1>
        <!-- InstanceBeginEditable name="Page Content" -->
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <p> </p>
        <!-- InstanceEndEditable -->
    <!-- end #mainContent --></div>
    <!-- This clearing element should immediately follow the #mainContent div in order to force the #container div to contain all child floats --><br class="clearfloat" />
      <div id="footer"><!-- InstanceBeginEditable name="Footer Navigation Bar" -->
        <div class="footernav" id="footernavbar"><a href="http://www.prayerechoes.com/">HOME</a> | <a href="aboutus.html">ABOUT US</a> | <a href="feedback.html">CONTACT US</a> | <a href="faq.html">FAQ</a> | <a href="mission.html">MISSION</a> | <a href="policies.html">POLICIES</a> | <a href="testimonials.html">TESTIMONIALS</a> | <a href="sitemap.html">SITE MAP</a></div>
      <!-- InstanceEndEditable --><!-- InstanceBeginEditable name="Copyright" -->
        <p>Copyright &copy; 2009-2010 by Prayer Echoes. All rights reserved.</p>
        <!-- InstanceEndEditable -->
        <!-- end #footer --></div>
    <!-- end #container --></div>
    <script type="text/javascript">
    <!--
    var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    //-->
    </script>
    </body>
    <!-- InstanceEnd --></html>

    Thank you for your help and patience. I figured it out for all of my issues by you leading me a
    t the beginning.

  • Importing Error Question

    We have a few workstations receiving the following error on the automatic
    importing.
    WSREG-v3.0 This log file is reporting activity on a WM_USER_LOGIN_EVENT
    event.
    WSREG-v3.0 While contacting the Work Station Import Service, an error 0
    was encountered, and error description <Winsock connect() failed.> was
    reported.
    WSREG-v3.0 Registration will not occur for this event.
    WSREG-v3.0 The program finished running.
    I have checked the zenwsimport in the hosts file and it points to the
    correct location. 4.91 client.
    Most of the errors I have ran into are -1, but I haven't been able to find
    anything on an error 0.
    Any help would be appreciated.

    Reitzrm,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

Maybe you are looking for