Error RCV_TP_INVALID_DEST_TYPE when Receiving Transaction processor is run
Hi,
I am encountering error RCV_TP_INVALID_DEST_TYPE, when I try to run Receiving Transaction processor.
What does this error indicate?
Thanks
Manpreet
Dear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu
Similar Messages
-
RCV_TP_INVALID_DEST_TYPE for Receiving Transaction Processor (Receiving Transaction Processor)
Hi
I have a receipt_num 1234 that has 14 lines in it ( from 29-46) and the po_number is 454545.
When I load the receipt with the receiving trans process a recipt get created for all lines except for 1.
This particular line which is 46 is still in the rcv_transactions_interface table as an error, when Update this table and SET processing_status_code = 'PENDING',
transaction_status_code = 'PENDING' and rerun the program it's does not load the data and it complete with a warning and when I look at the po_interface_errors I see this(RCV_TP_INVALID_DEST_TYPE). and put the processing_status_code = 'COMPLETED'and transaction_status_code = 'ERROR'.
Please help please help
nullRCV_HEADERS_INTERFACE
RCV_TRANSACTIONS_INTERFACE
If you have serial numbers or lot numbers for the receipts, then you need to insert into
RCV_SERIALS_INTERFACE
RCV_LOTS_INTERFACE
Once the transactions are processed, you will see records in
RCV_SHIPMENT_HEADERS
RCV_SHIPMENT_LINES
For details on the interface, check irep.oracle.com
See Import PO Receipts using custom conversion. for some scripts.
And see http://www.oracleug.com/tables/purchasing/rcvheadersinterface and http://www.oracleug.com/tables/purchasing/rcvtrnsactionsinterface for details on the tables.
Hope this answers your question,
Sandeep Gandhi -
Receiving Transaction Processor runs even if processing mode is ON-LINE
Hi All,
We have a problem with receiving. The profile option RCV: Processing Mode is set to ON-LINE at site level. We observed that the Receiving Transaction Processor is running for a bunch of transactions with IMMEDIATE processing mode.
We checked the responsibility level and user level profile options too and nothing is set. only at site level we have that profile option set to ON-LINE.
What could be the reason for this Transaction Processor to run???
Please let us know.
Thanks,
PrathimaHow are you trying to receive the items. Is it through iProcurement or Core Purchasing Forms?
-
Validations done by Receiving transaction processor
I'm writing a custom program to receive an EDI 856(ASN) file and populating the data in the rcv interface tables for the Receiving transaction processor to run and create receipts for PO receiving.
Before populating the data from the file into rcv interface tables, I would like to do the same validations which the RCVTP would do.
Is there an API which can be used to do these validations?
Does someone have the list of validations that can be performed so that RCVTP doesn't fail in validations later?
Or is there a document which gives the list of all possible errors that can be found in po_interface_errors table.
We are on 11.5.10.2
Please help.
Thanks
SandeepHi,
Please review the following docs and see if it helps you :
How To Diagnose An Issue in ROI Receiving Open Interface in 11.5.10 / R12 PO / IOT / Req / RMA (Doc ID 564723.1)
FAQ: Purchasing Documents Open Interface (Doc ID 224031.1)
Thanks &
Best Regards, -
Receiving transaction processor populates quantity_received = 0
Hello Everyone,
I'm populating a non-zero value into rcv_transactions_interface.quantity field. After Receiving Transaction Processor is run, a record is created in rcv_shipment_headers table and rcv_shipment_lines tables. But rcv_shipment_lines.quantity_received is popilated with 0 where as quantity_shipped is populated correctly with the value that is inserted in the interface table.
When this happens the shipment_line_status_code is 'EXPECTED' and there is no record created in rcv_transactions table.
Can any one please let me why this happens??
Thanks in Advance
Sunny.Hi,
Check out metalink Note:219958.1
cause: The parent_transaction_id loaded into the rcv_transactions_interface table did not exist -
Issue regarding Receiving Transaction Processor (ROI)
Hi Experts,
We have EBS 11i (11.5.10.2) .
At the time of PO Receipt thru application, the following 3 concurrent processes are running.
(1) Receiving Transaction Processor
(2) Receipt Traveller Concurrent program
(3) Journal Import
After creating the receipt thru application, we can modify the taxes at receipt time also.
Now, same thing we are doing with Interface.
In this scenario, the receipt is created successfuly thru Interface.
Right now, we are running the process : *'Receiving Transaction Processor'* manually for the same.
After running this process, the second process: *'Receipt Traveller Concurrent program'* is not running. In place , process : *'India - Receiving Transaction Processor'* is running.
Also, For receipt created thru interface, we cannot modify the taxes
Can anyone guide me , what we have to do to run the process: *'Receipt Traveller Concurrent program'* and to change the taxes.
KFI, the we have taken processing_mode_code = 'BATCH' in RCV_TRANSACTIONS_INTERFACE table.
regards
SanjayHi PS,
Thanks for reply.
we want to control the receiving transaction processor .
when we are running the process : ' receiving transaction processor ' through interface, another process : ' India - Receiving Transaction ' is automatically fired that we do not want . Due to this , the taxes are freezed at receipt level and we cannot modify the same.
I hope you understood the scenario.
Sanjay -
Error occured when running the "Receiving Transaction Processor"
Dear all :
We just found the scheduled concurrent program "Receiving Transaction Processor" all failed from last day,
and this program is always trying to re-run till it could finished successful.
the request log like following :
采购管理系统: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: 接收事务处理处理器
当前的系统时间为 25-02-2013 17:10:28
并发程序 RVCTP 返回错误
原因:RVCTP 遇到内部错误。参数:RVCTP,BATCH,,,
措施:请记录此错误编号以及您尝试进行的活动。请与系统管理员联系以寻求帮助。
RVTBM-007:子例行程序 rvtbm_batch_mngr() 返回的错误
原因:子例行程序 rvtbm_batch_mngr() 返回时出现内部错误。
措施:请记录此错误编号以及您尝试进行的活动。 请与系统管理员联系以
RVTBM-080:子例行程序 rvtptcontrol() 返回的错误
原因:子例行程序 rvtptcontrol() 返回时出现内部错误。
措施:请记录此错误编号以及您尝试进行的活动。 请与系统管理员联系以寻求帮
RVTLO-050:ORA-01403: 未找到任何数据
原因:在 RVTLO 中出现 SQL 错误。SQL 错误为 &LSQL_ERR。
措施:请记录此错误编号以及您尝试进行的活动。请与系统管理
在试图启动立即并发程序 RVCTP 时,并发管理器出现错误。例行程序 &ROUTINE 接收到返回代码失败的信息。
请与您的支持代表联系。
当前的系统时间为 25-02-2013 17:10:29
成功地重新提交具有请求编号 21500965 的并发程序 RVCTP,以在 25-02-2013 17:05:30 启动。 (ROUTINE=AFPSRS)
正在执行请求完成选项...
Output file size:
0
未打印输出文件,因为:
已禁用此报表的打印选项。
已完成执行请求完成选项。
thanks and regards
Filex LiuDear all:
thanks for your attention, this problem has been resolved.
It's just because the error data in some lines about ship.
Some ship that has been canceled keep its status colum to be "running" and this cause the "Receiving Transaction Processor" to be error.
after change the status from running to error for the ships that has been cancel, it will recover.
thanks and regards
Filex Liu -
Getting error while running Receiving Transaction Processor
Hi all,i am getting an error in po_interface_errors after running Receiving Transaction Processor concurrent program
INTERFACE_TYPE COLUMN_NAME ERROR_MESSAGE
RCV-856 INTERFACE_TRANSACTION_ID RCV_TP_INVALID_TRX_TYPE
TABLE_NAME
RCV_TRANSACTIONS_INTERFACEI am trying to do an Inter Org transfer and i put the transaction_type as 'RECEIVE' .Can someone kindly suggest what should be the transaction_type for an Inter Org Transfer in rcv_transactions_interface table.Any help is appreciated
Thanks in advance!!HI,
We are getting the transaction_type error eventhough the transaction_type is a valid.
Please advise.
Regards
MV -
'Receiving Transaction Processor' ends with error. Receipt not saved.
Trying to make receipt. On header done add to receipt. When the receipt is selected and saved. & then tried to open receving transaction. Receipt NOT found also 'Receiving Transaction Processor' ends with error.
Plz Suggest soluntion.
Regds
9999When we do receipts then atomatically receiving transaction process runs. On header of receipt there is add to receipt oprtion. User adding in erliar made receipt. But when done add to receipt transction get saved but this receipt number not able to find in receiving transaction.
Now kindly help..!!!
9999 -
Error in Receiving Transaction Processor concurrent program
Hi all,i am trying to insert data into rcv_headers_interface and rcv_transactions_interface.So,for this data to get populated in rcv_shipment_headers and rcv_shipment_lines i am running Receiving Transaction Processor concurrent program in purchasing super user.But,this concurrent program gives below error
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:05
+---------------------------------------------------------------------------+
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,,81,
Action: Note both this error number and the actions you are trying to perform. Contact your system administr
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause: A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
+---------------------------------------------------------------------------+
Current system time is 14-OCT-2011 06:11:10
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
0
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
{code}
Can someone kindly explain me what's really going why coz i am new to this Applications.
Thanks in advance!!There are several notes on metalink for "RVTBM-007: Subroutine rvtbm_batch_mngr() returned error".
Take a look at those.
Also if you are using dual uoms, make sure that setup and conversion is setup correctly.
Hope this helps,
Sandeep Gandhi -
'Receiving Transaction Processor' ERRORS
Hi All,
While Running the Seeded Program 'Receiving Transaction Processor', I am getting the following Errors:
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,69604,
Action: Note both this error number and the actions you are trying to perform. Contact your system adminis
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-080: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Please help out..,
many thanks......Hi,
Check out metalink Note:219958.1
cause: The parent_transaction_id loaded into the rcv_transactions_interface table did not exist -
India - Receiving Transaction Processor program completing in Error status
Hi All
We are getting below error message in program "India - Receiving Transaction Processor". We are on R12.1.3 version.
*** List of Transactions whose processing is skipped due to the below errors ***
Transaction_id->5002 Error Message->Error in Line Number 1 - jai_rgm_claims_pkg.get_term_id => Location ID cannot be NULL
Please suggest the solution.
Thanks
GaneshHi,
The reason for the exception is we don't have any data in the file to zip. If you are sending xml data to the data definition check the path in select clause in bursting control file.
Regards,
Raavi -
Please help on if anyone run the receiving transaction processor in online/immediate mode
Hi All,
Can anybody pl let me know how to run the receiving trx processor in online/immediate mode??
Regards
Harry !!Hi Harry,
System Profile "RCV: Processing Mode" decides the processing mode for receiving transactions, it can be either in "Batch", "Immediate" or "On-line" modes. It is reflected in RCV_TRANSACTIONS_INTERFACE.PROCESSING_MODE_CODE field.
Please refer:
https://forums.oracle.com/thread/2513499
Also have a look at:
Forum Search: Receiving Transaction Processor
Best Regards, -
Receiving Transaction Processor ERROR
Hello Experts,
Greetings!
I have inserted data into rcv_headers_interface and rcv_transactions_interface to import the PO receipts into the RCV base tables. After executing 'Receiving Transaction Processor' , I am getting below given error , unable to get the trace of this Issue. Please help me in understanding this.
My requirement is to load the PO receipts from the external system into oracle database. Please help me with any piece of information you have.
===================ERROR==============
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,41688,,
Action: Note both this error number and the actions you are trying to perform. Contact your system admini
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-040: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "APP
Cause: A SQL error has occurred in RVTBM. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Thank you.
Best regards,
S.Jain.See if you have data in po_interface_errors for that transaction
-
RVCTP module: Receiving Transaction Processor
Hi,
I am doing receipt using by passing ASN no as input parameter, not picking the records from interface tables.
when i checked in rcv_transactions_interface table proceeing_status_code is "RUNNING" , "PENDING" .
when i run the Receiving Transaction Processor got below error.
i changed profile option as "BATCH", still getting same error
please help to solve this
Purchasing: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
RVCTP module: Receiving Transaction Processor
Current system time is 16-NOV-2010 13:05:39
Concurrent program RVCTP returned error
Cause: RVCTP encountered an internal error. Parameters: RVCTP,BATCH,122227,
Action: Note both this error number and the actions you are trying to perform. Contact your system admini
RVTBM-007: Subroutine rvtbm_batch_mngr() returned error
Cause: Subroutine rvtbm_batch_mngr() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system admini
RVTBM-080: Subroutine rvtptcontrol() returned error
Cause: Subroutine rvtptcontrol() returned an internal error.
Action: Note this error number and the actions you are trying to perform. Contact your system administrator
RVTLO-005: ORA-01403: no data found
Cause: A SQL error has occurred in RVTLO. The SQL error is &LSQL_ERR.
Action: Take note of both this error number and the actions you were t
Concurrent Manager encountered an error while attempting to start your immediate concurrent program RVCTP. Routine &ROUTINE received a return code of failure.
Contact your support representative.
Current system time is 16-NOV-2010 13:05:40
Executing request completion options...Hi Sandeep,
thanks for your reply,
i am inserting the records using below script.
INSERT INTO RCV_HEADERS_INTERFACE
HEADER_INTERFACE_ID
,GROUP_ID
,PROCESSING_STATUS_CODE
,RECEIPT_SOURCE_CODE
,TRANSACTION_TYPE
-- ,RECEIPT_HEADER_ID
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,LAST_UPDATE_LOGIN
,CREATION_DATE
,CREATED_BY
,VENDOR_ID
,VENDOR_SITE_ID
,VALIDATION_FLAG
,ATTRIBUTE12
-- ,SHIPMENT_NUM
,EMPLOYEE_ID
,BILL_OF_LADING
,PACKING_SLIP
,NUM_OF_CONTAINERS
,GROSS_WEIGHT
,GROSS_WEIGHT_UOM_CODE
,WAYBILL_AIRBILL_NUM
,COMMENTS
,FREIGHT_TERMS
,INVOICE_NUM
,INVOICE_DATE
,ATTRIBUTE1
,ATTRIBUTE2
,ATTRIBUTE3
,ATTRIBUTE4
,ATTRIBUTE6
,ATTRIBUTE7
,ATTRIBUTE8
,ATTRIBUTE9
,ATTRIBUTE10
,ATTRIBUTE11
,SHIPPED_DATE
,EXPECTED_RECEIPT_DATE
-- ,RECEIPT_NUM
VALUES(l_header_interface_id
,l_group_id
,'BATCH' --'PENDING'
,'VENDOR'
,'NEW' --'RECEIVE'
-- ,H.SHIPMENT_HEADER_ID
,sysdate
,l_user_id
,l_login_id
,H.CREATION_DATE
,H.CREATED_BY
,H.VENDOR_ID
,H.VENDOR_SITE_ID
,'Y'
,H.ATTRIBUTE12
-- ,l_sil_number
,H.EMPLOYEE_ID
,H.BILL_OF_LADING
,H.PACKING_SLIP
,H.NUM_OF_CONTAINERS
,H.GROSS_WEIGHT
,H.GROSS_WEIGHT_UOM_CODE
,H.WAYBILL_AIRBILL_NUM
,H.COMMENTS
,H.FREIGHT_TERMS
,H.INVOICE_NUM
,H.INVOICE_DATE
,H.ATTRIBUTE1
,H.ATTRIBUTE2
,H.ATTRIBUTE3
,H.ATTRIBUTE4
,H.ATTRIBUTE6
,H.ATTRIBUTE7
,H.ATTRIBUTE8
,H.ATTRIBUTE9
,H.ATTRIBUTE10
,H.ATTRIBUTE11
,H.SHIPPED_DATE
,sysdate
-- ,11111111
INSERT INTO RCV_TRANSACTIONS_INTERFACE
INTERFACE_TRANSACTION_ID
,GROUP_ID
,LAST_UPDATE_DATE
,LAST_UPDATED_BY
,CREATION_DATE
,CREATED_BY
,LAST_UPDATE_LOGIN
,TRANSACTION_TYPE
,TRANSACTION_DATE
,PROCESSING_STATUS_CODE
,PROCESSING_MODE_CODE
,TRANSACTION_STATUS_CODE
,QUANTITY
,UNIT_OF_MEASURE
,ITEM_ID
,UOM_CODE
,INTERFACE_SOURCE_CODE
,SHIPMENT_HEADER_ID
-- ,SHIPMENT_LINE_ID
--,USER_ENTERED_FLAG
,SOURCE_DOCUMENT_CODE
,DESTINATION_TYPE_CODE
,PRIMARY_QUANTITY
,PRIMARY_UNIT_OF_MEASURE
,RECEIPT_SOURCE_CODE
,EMPLOYEE_ID
,PARENT_TRANSACTION_ID
,PO_HEADER_ID
,PO_RELEASE_ID
,PO_LINE_ID
,PO_LINE_LOCATION_ID
,PO_DISTRIBUTION_ID
--,PO_REVISION_NUM
,PO_UNIT_PRICE
,CURRENCY_CODE
,CURRENCY_CONVERSION_TYPE
,CURRENCY_CONVERSION_RATE
,CURRENCY_CONVERSION_DATE
,VENDOR_ID
,VENDOR_SITE_ID
,TO_ORGANIZATION_ID
,LOCATOR_ID
,SHIP_TO_LOCATION_CODE
-- ,AUTO_TRANSACT_CODE
,VALIDATION_FLAG
VALUES
l_transaction_id
,l_group_id
,sysdate
,l_user_id
,sysdate
,l_user_id
,l_login_id
,'RECEIVE'
,sysdate
,'PENDING'
,'BATCH'
,'PENDING'
,r.QUANTITY_SHIPPED
,r.UNIT_OF_MEASURE
,r.ITEM_ID
,l_uom_code--UOM_CODE
,'RCV'
,l_header_interface_id --r.SHIPMENT_HEADER_ID
-- ,r.SHIPMENT_LINE_ID
-- ,'Y' --USER_ENTERED_FLAG
,'PO' --SOURCE_DOCUMENT_CODE
,'RECEIVING' -- DESTINATION_TYPE_CODE
,r.QUANTITY_SHIPPED --PRIMARY_QUANTITY
,r.PRIMARY_UNIT_OF_MEASURE --PRIMARY_UNIT_OF_MEASURE
,'VENDOR' -- RECEIPT_SOURCE_CODE -
,r.EMPLOYEE_ID --EMPLOYEE_ID
,-1 --PARENT_TRANSACTION_ID -
,r.PO_HEADER_ID
,r.PO_RELEASE_ID
,r.PO_LINE_ID
,r.PO_LINE_LOCATION_ID
,r.PO_DISTRIBUTION_ID
--,r.PO_REVISION_NUM
,r.UNIT_PRICE --PO_UNIT_PRICE
,r.CURRENCY_CODE
,r.RATE_TYPE -- CURRENCY_CONVERSION_TYPE -
,r.RATE -- CURRENCY_CONVERSION_RATE
,r.RATE_DATE -- CURRENCY_CONVERSION_DATE
,r.VENDOR_ID
,r.VENDOR_SITE_ID
,r.TO_ORGANIZATION_ID --ORGANIZATION_ID
,41
,'GNE JEBEL ALI'
-- ,'DELIVER'
,'Y'
can you plz suggest if i am wrong
Maybe you are looking for
-
New iPod Touch losing charge w/out use
I received a new iPod Touch for Christmas, and while it will charge in the time specified in the manual it will not hold a charge like the manual says ("Even in sleep, iPod uses a small amount of current, and the battery slowly empties. Stored at opt
-
hi friends In MCSI report, we select S907 info structure in the combination of Dist channel, Divi, Sales office,Sold to party and period I Hav given dc-10,div-10, soldtoparty-50301and period 1.9.08 to 30.9.08 then screen displays with following detai
-
Library found on ATV but will not load
Have ATV hooked up via HDMI to TV with Optical digital audio cable connected to Pioneer Elite VSX-03 TXH ATV connected wireless to router. iTunes Library on wireless windows xp laptop both connected to same/only router I can watch Netflix, listen to
-
How can I call external batch command in FORM?
-
My Ipod's screen doesn't start.
Hi, I have an Ipod nano 6th generation (with the touch screen) and one day it decided for no reason to not start. First I thought the battery was dead. But after 6 straight hours of recharge from a wall plug, it wouldn't start anyway. I tried to plug