Error reading/writing file message when opening garageband and/or files

I've been recently getting this message when I open garageband and files
"Error reading/writing file\U201Ccom.apple.garageband.cs\U201D
I've been in and repaired disk permissions and all that it says it is all fine, reinstall garageband and message still comes up, weird.
not only is garageband being a nuisance, Mac OS X 10.6.2 is being a pain when shutting down telling me to restart the computer. This only happened since upgrading to 10.6. No one as yet knows this promble so I'm gonna have to ring apple and see what is going on here.
and also my other problem is that mac doesn't seem as snappy anymore I noticed this before upgrading to 10.6 and made no difference when "cleanly" installing 10.6. I get a colour wheel popping up and i'm having to wait with simple tasks. iMac only 2 years old.

i give up with this discussion forum no no one knows anything

Similar Messages

  • I had to reinstall CS4 and now have error messages when opening bridge and photoshop

    The error message is "The specified module could not be found. C:\Program Files (x86)\Common Files\Adobe\Adobe Version Cue CS4\Client\4.0.1\Version Cue.DLL

    I tried what you suggested and it did not help.  whenever I try to open either photoshop or bridge, I get a message saying that there was a problem loading scripts the last time that Bridge was open and do I want to try loading them again?  If I click yes, I get that same error message that I reported in my original question and photoshop/bridge will immediately close.  If I click no, photoshop and bridge will open but it will not let me open a raw format document.  It seems like Adobe Camera Raw is not being recognized.   One of the updates I downloaded was an update to Adobe Camera Raw so the functionality is there, it just can't be accessed.  do you think I should try to uninstall and re-install Photoshop again?
    Date: Mon, 3 Sep 2012 19:48:31 -0600
    From: [email protected]
    To: [email protected]
    Subject: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        Re: I had to reinstall CS4 and now have error messages when opening bridge and photoshop
        created by Arpit Kapoor in Downloading, Installing, Setting Up - View the full discussion
    Go To Help->Updates and install the latest update. It should work.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4670793#4670793
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4670793#4670793. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help?

    I am getting a 42404 error message when opening itunes and itunes will not let me connect my iphone to it trying to get me to restore. I need help? I am not that technically inclined and really simple terms  are appreciated.

    Try downloading the songs from a different device. If you are doing it from your iOS device, try form your computer.

  • Error writing to file messages when itunes installation is removing files

    I receive almost error writing to file messages when the itunes installation is removing files. I simply click on the retry button without making any access changes and the installation moves on. All of the .rbf files (the first 10 are listed below) are in C:\Config.Msi that errors. Please tell me how to prevent these errors in Windows Vista.
    3f9ad5.rbf
    3f9af2.rbf
    3f9b08.rbf
    3f9b0a.rbf
    3f9b0b.rbf
    3f9b47.rbf
    3f9b50.rbf
    3f9b55.rbf
    3f9b71.rbf
    3f9b7b.rbf

    The nearest I can find is there is a conflict between the Windows Backup program (which creates zip files) and Stuffit, which also creates zip files. Have you been using both those programs?

  • Not enough memory message when opening excel and powerpoint

    I am running Mac OS X version 10.5.8. I installed Microsoft Office 2008 for Mac about a year ago and was running it without any trouble until about 3 months ago. I can still open Word, but receive a 'not enough memory' message when I try to open Excel or Powerpoint. Has anyone else encountered this problem and does anyone know how to fix it? Thanks

    Yes I have and I think that's when the problem occurred. I've just read another post from someone who was having the same problem. Apparently the solution is just to keep hitting the escape button every time the error message pops up and eventually the application opens! Not very high tech, but I'll give it a go and let you know how I get on.

  • Error message when opening iTunes and Mail

    I'm running OS X 10.6.8 on a Mac Book.
    Since the recent 'hack' reports, I subsequently changed my Apple Password.
    Since then, when I open iTunes I get the error message:
    "You are signed in with a different Apple ID than previously used with podcsts. Do you want to sunc these podcast subscriptions and stations with <my e-mail address>?
    If you chose to sync then these podcasts and stations will be merged with any that have been syncing on other devices or computers.""
    If I click the highlighted blue 'Sync' button, it does sync, but it's frustrating that I always get the error message. Why is this happening?
    Also, when trying to use Gmail, I now get the error message:
    "Enter Password for Account GMail.
    Enter the password for user <my g-mail address> on POP server imap.gmail.com"
    Neither my old or new password allows me to use Mail. Can anyone help?
    Thanks

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Repair files message when opening Photoshop Elements 6

    Why do I get a message saying files need to be repaired every time I open Elements 6 on my Mac?
    Message title was edited by: Brett N

    If you move the application file to a different location (e.g. your desktop), the application needs to be "repaired" to have support files point to the new location. Usually this repair will remember the new location, but there could be some issues with permissions. But I would simply suggest moving the application file back to the installation location and then creating an alias on your desktop or in the Dock.

  • Error message when opening Firefox and loading very slow:

    This is the error message I am getting everytime I try to open Firefox - either from the shortcut or from a program such as Outlook:
    [Exception... "Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [ISkypeFfExtension.Initialize]" nsresult: "0x80004005 (NS_ERROR_FAILURE)" location: "JS frame :: chrome://skype_ff_extension/content/browserOverlay.js :: <TOP_LEVEL> :: line 9" data: no]

    2 days is too slow (28-29)/9/2011

  • Error reading/writing file "com.garageband.cs":`≤Ć». message

    Hey all! Don't know if anyone can help but I keep getting the message...
    " Error reading/writing file "com.garageband.cs":`≤Ć». " with a cancel button.
    If you click on it it does go away, but after a time playback starts skipping and stuff.
    Anyone help please?
    Thanks
    Righini

    first two things to try for “oddball” probs:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Keep getting message pop up "Error reading/writing file  "com.apple.logic.pro.cs": Logical end-of-file reached during read operation," and "The Preferences are not loaded completely. Save them to "com.apple.logic.pro.cs" anyway?" Using Logic pro 8. ???

    Logic froze while I was working on something so I forced quit.  Now every time I open LOGIC a message pops up that says:
    "Error reading/writing file
    “com.apple.logic.pro.cs”:
    Logical end-of-file reached during read operation."
    The only button option is cancel so I press it and another message appears that says:
    "The Preferences are not loaded completely.
    Do not save them, as you would overwrite the Preferences file with incomplete data."
    Then when i close logic a box appears saying:
    "The Preferences are not loaded completely.
    Save them to "com.apple.logic.pro.cs" anyway?"
    There are 3 button options to press; ok, cancel or dont save.
    I press "don’t save" cuz I don't want to ruin anything.
    I found a discussion located here: https://discussions.apple.com/message/9564253#9564253 that says if I delete the file "com.apple.logic.pro.cs" it will resolve the problem.  If I do this will I loose or mess anything up at all, automation, saved channel strips customizations, saved effects, synth, or ultrabeat customizations etc? Or especially will I loose any work I've done?  I have hundreds pieces of music files I've created.  I'm scared to mess anything up with all the hours and months of work I've done.  Is there anyway to fix this without loosing anything?  I'm using Logic Pro 8.
    Thank you

    You can safely delete this file - its the preference file for control surface settings - you haven't said whether you're actually using a control surface or not, if so, you will have to set it up again. A new file will be created when you fire Logic up again, but of course it will contain default settings. If you have a complicated control surface setup, remember to keep a backup copy somewhere in case any future problems arise.
    Other than that, you really have nothing to be scared about - hopefully your problem is as simple as that and there isn't an underlying problem (a corrupt hard drive, for example). You seem concerned about losing work, so I guess you want to think about backing that up on a regular basis too. If you're saving your projects to your system drive, do get an external one for this. And also check that you have plent of free space on your system drive - you need to keep about a quarter or third of it free for your OS and programs to run properly (some temporarily stored files can be quite large).

  • Error message when opening CS6 files in earlier versions

    PSCS6 with 12.0.4 update.  Mac OSX 10.8.2   16GB 1333 Mhz DDR3  543 GB Available
    I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version).  The message is:
    This document contains unknown data which will be discarded to keep layers editable.  To preserve the original appearance instead, choose flatten to load composite data as a flattened image. 
    Three options follow:  Flatten  Cancel  Keep Layers
    When 'keep layers' is selected the file opens as normal.  However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
    I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should.  Those on very early version of PS can also open the files without any issues. 
    I've been using CS6 since it was released and have had to delve through all my files and save them in CS5.  Not every file is affected and I've been unable to find a common thread.
    Hoping someone can throw some light on this.

    This similar to the message one should get in an older version of photoshop such as photoshop 7.
    If one presses ok instead of read composite that might preserve the layers with the original look.
    But sometimes if a layer blending mode or some other feature is used an earlier versions of photoshop doesn't have, reading the composite is the only way to preserve the look of the image.
    You said your using shape layers?
    If they are shape layers you didn't use a stroke from the tool options bar?
    Can you post an example of the image with the layers panel visible that you get that message with?
    I guess your using photoshop cs6 with the 13.01 update?

  • Error message when opening adobe premier 10 saved film file , this file is not supported or required codec not installed

    Hi
    Can any one help, keep getting error message,error message when opening adobe premier 10 film file , this file is not supported or required codec not installed,
    Thanks
    Colin65

    Steve,
    Not to sure what type AVI files they are, the storage devise is at present offshore on a job.
    Can you clarify, if you edit/import video footage with adobe premiere 10 and then create a file, the file or the original raw footage is not stored on computer for re-use, if it is stored, is it stored in the original format.
    Also please find details of storage devise,
    Dogcam Portable Media Center PMC-500r
    Quick DetailsModel Number:PMC-500R
    SpecificationsPMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports
    PMC-500R20G/40G Portable Multimedia PlayerPMC-500R 20G/40G Portable Multimedia Player, Supports MPEG-4 File FormatsKey Specifications/Special Features:Video recorder: supports digital video recoding in MPEG4 from Line-in Video playback: supports MPEG4 (AVI), MPEG1 (.MPG), DVD (MPEG2,.VOB) Supports MPEG4 with 720 x 480 at 30 Frames/s MPEG4 movie playing with Fast Forward, Fast Reverse, Time search function Music playback: supports MP3, WMA, WAV Music playing with play list function MP3 ID3 information and sorting, LRC Music playing with repeat, shuffle playing function Photos view: supports JPEG and slide show, rotate, nail view Easy backup of photos in digital camera -USB OTG technology Audio recording: continues recording for over 40 hours High resolution output for HDTV (Y, U, V output; 704 x 480 (N) or 704 x 576 (P), at 25/30 frames/s) Super dlim size: 126 x 79 x 22.5 mm Games E-book with bookmark, auto turning page, page search function File browser function with Copy, Delete, HDD capacity information With 3.5" LCD QVGA TFT panel (960 x 240) Long time battery running (over 5 hours for video, and 9 hours for audio) 1.8" 20G/40G storage capacity High fidelity sound with good earphoneCompass Electronics Co.,

  • Error message when opening file

    When opening a client's file and I keep getting the error "Adobe Muse will now shutdown. Assert: BackgroundImage is not loaded?" ...can this be fixed or am I in trouble? This is a very important client and if I have to redo their website from scratch it will most certainly lose us the account.
    It does not give me this error with any other file.

    Can you send me a copy of your file at [email protected] and include a link to this thread? If it's too big for e-mail (>20 mb) you could use a service like SendThisFile, WeTransfer or Adobe SendNow.
    Most of Adobe in North America is shutdown this week and I'll be away from my computer much of the day but will take a look at your file as soon as I can.

  • HT2041 I receive an error message when opening up a downloaded program as "Safari can't open the file because no availabel application can open it". Not sure what exactly this means or what I have to do!

    I receive an error message when opening up a downloaded program "safari can't open the file because no available application can open it" I am not sure what I need to do to get these programs open!

    What is the file?
    Where did you get it from?
    Allan

  • ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css   Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers

    ERROR MESSAGE WHEN USING PACK COMMAND   Missing file ////presenter.css    Command then fails
    Also:  "This course requires JavaScript to be enabled in your browser. Please enable JavaScript, then relaunch the course."  I have Java enabled in all browsers
    Thoughts?  Using Presenter 10  Win 8.1  Intel I7  new HP with plenty of memory
                   Thanks

    I had saved one copy as an .asp but then resaved it to .xhtml 
    I'm assuming this is a static web site.  Rename (F2) all your pages with .html or .htm extension. 
    .xhtml is not a valid extension.
    Nancy O.

Maybe you are looking for