Error reading wsdl file excepetion null

Hi
I am trying to invoke a proxy service (web service) wsdl from a bpel process. When i add a web service adapter, put url of external web service and save it, all my service end points defined in the BPEL process are becoming non editable. Binding of operation is changing from web service to HTTP binding for all end points. When I try to edit any partner link, Jdev throws an error " error reading wsdl file excepetion null " for local services. For external service, even though i am refering to a url on the server, it points to " C:\Oracle\Middleware\jdeveloper\jdev\bin\...\xxxx?WSDL" and throws same error " failed to read wsdl file(System could not find the path specified". I am just clueless as to why this is happening. Any help is much appreciated.

Try the SOA Forum - SOA Suite

Similar Messages

Error while reading wsdl file exception null

Hi
I am trying to invoke a proxy service (web service) wsdl from a bpel process. When i add a web service adapter, put url of external web service and save it, all my service end points defined in the BPEL process are becoming non editable. Binding of operation is changing from web service to HTTP binding for all end points. When I try to edit any partner link, Jdev throws an error " error reading wsdl file excepetion null " for local services. For external service, even though i am refering to a url on the server, it points to " C:\Oracle\Middleware\jdeveloper\jdev\bin\...\xxxx?WSDL" and throws same error " failed to read wsdl file(System could not find the path specified". I am just clueless as to why this is happening. Any help is much appreciated.
I am using Jdev 111115 and SOA 11g.

remove all the files from your temp folder
restart your jdev this will resolve this issue.

Error reading WSDL File in ORABPEL 10.1.3.1

Hi all,
I'm stuck with the following situation so any help would be highly appreciated.
I need to use a Web Service provided by a third party. I tested this Web Service using a .NET client successfully. I'm able to create the partner link and see all the available methods on the Web Service but when I'm trying to compile the BPEL project I'm getting this:
| Compiling bpel process PruebaArregloFinacle, revision 1.0
[bpelc] home directory is: C:\BPEL R3\Jdeveloper\/integration/bpel
[bpelc] loading WSDLs ...
[bpelc] reading partner client's WSDL at C:\OraBPELPM_2\integration\jdev\jdev\mywork\BPEL_PRUEBAS_BPELR3\PruebaArregloFinacle\bpel\PruebaArregloFinacle.wsdl
[bpelc] done reading wsdl for partner: client
[bpelc] reading partner WSFinacle's WSDL at C:\OraBPELPM_2\integration\jdev\jdev\mywork\BPEL_PRUEBAS_BPELR3\PruebaArregloFinacle\bpel\WSFinacle.wsdl
[bpelc] done reading wsdl for partner: WSFinacle
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def file:/C:/OraBPELPM_2/integration/jdev/jdev/mywork/BPEL_PRUEBAS_BPELR3/PruebaArregloFinacle/bpel/WSFinacle.wsdl
[bpelc] <WSDLSchemaUtil::loadAllSchemas> loading all schemas for def http://10.1.2.12:8282/ci/services/Account?WSDL
[bpelc] BPELValidator
[bpelc] ORABPEL-09701
[bpelc]
[bpelc] Error al cargar esquemas de wsdl.
[bpelc] Error al cargar esquemas desde el archivo wsdl en la ubicación "http://10.1.2.12:8282/ci/services/Account?WSDL". El motivo es .
[bpelc] Verifique los esquemas definidos en wsdl.
[bpelc]
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadEmbeddedSchemas(WSDLSchemaManager.java:720)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadSchemasFromWSDL(WSDLSchemaManager.java:610)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadImportedSchemasPerNS(WSDLSchemaManager.java:813)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadImportedSchemasPerWSDL(WSDLSchemaManager.java:767)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadSchemasFromWSDL(WSDLSchemaManager.java:606)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadAllSchemas(WSDLSchemaManager.java:313)
[bpelc]      at com.collaxa.cube.lang.compiler.BPELProcessModel.loadWSDLs(BPELProcessModel.java:208)
[bpelc]      at com.collaxa.cube.lang.compiler.bpel.BPELValidator.validateClientSide(BPELValidator.java:67)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1130)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] Caused by: java.lang.IllegalArgumentException
[bpelc]      at java.net.URI.create(URI.java:842)
[bpelc]      at java.net.URI.resolve(URI.java:1028)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.processSchemaImportsAndInclude(WSDLSchemaManager.java:1905)
[bpelc]      at com.collaxa.cube.xml.xsd.xerces.WSDLSchemaManager.loadEmbeddedSchemas(WSDLSchemaManager.java:716)
[bpelc]      ... 27 more
[bpelc] Caused by: java.net.URISyntaxException: Illegal character in opaque part at index 17: jar:file:/C:/BPEL R3/Jdeveloper/integration/lib/orabpel.jar!/com/collaxa/cube/xml/xsd/xerces/resources/soap_encoding_1.1.xsd
[bpelc]      at java.net.URI$Parser.fail(URI.java:2809)
[bpelc]      at java.net.URI$Parser.checkChars(URI.java:2982)
[bpelc]      at java.net.URI$Parser.parse(URI.java:3019)
[bpelc]      at java.net.URI.<init>(URI.java:578)
[bpelc]      at java.net.URI.create(URI.java:840)
[bpelc]      ... 30 more
[bpelc] ORABPEL-01021
[bpelc]
[bpelc] Fallo en la validación de BPEL.
[bpelc] Fallo en la validación de origen de BPEL, los errores son:
[bpelc]
[bpelc] [Error de ORABPEL-10903]: fallo al leer wsdl
[bpelc] [Descripción]: en "bpel.xml", Error al cargar esquemas de wsdl.
[bpelc] Error al cargar esquemas desde el archivo wsdl en la ubicación "http://10.1.2.12:8282/ci/services/Account?WSDL". El motivo es .
[bpelc] Verifique los esquemas definidos en wsdl.
[bpelc] .
[bpelc] [Posible corrección]: Si su dirección tiene un servidor proxy, tal vez tenga que configurar el servidor BPEL, el diseñador y el explorador con los valores de configuración del servidor proxy (consulte la nota técnica en http://otn.oracle.com/bpel para obtener instrucciones).
[bpelc] .
[bpelc]
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.validateClientSide(CubeProcessor.java:1133)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeProcessor.transformClientSide(CubeProcessor.java:449)
[bpelc]      at com.collaxa.cube.lang.compiler.CubeParserHelper.compileClientSide(CubeParserHelper.java:83)
[bpelc]      at com.collaxa.cube.ant.taskdefs.Bpelc.execute(Bpelc.java:626)
[bpelc]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[bpelc]      at org.apache.tools.ant.Task.perform(Task.java:364)
[bpelc]      at org.apache.tools.ant.Target.execute(Target.java:341)
[bpelc]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[bpelc]      at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
[bpelc]      at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
[bpelc]      at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
[bpelc]      at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
[bpelc]      at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[bpelc]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[bpelc]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[bpelc]      at java.lang.reflect.Method.invoke(Method.java:585)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
[bpelc]      at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
[bpelc] Fallo en la validación de BPEL.
[bpelc] Fallo en la validación de origen de BPEL, los errores son:
[bpelc]
[bpelc] [Error de ORABPEL-10903]: fallo al leer wsdl
[bpelc] [Descripción]: en "bpel.xml", Error al cargar esquemas de wsdl.
[bpelc] Error al cargar esquemas desde el archivo wsdl en la ubicación "http://10.1.2.12:8282/ci/services/Account?WSDL". El motivo es .
[bpelc] Verifique los esquemas definidos en wsdl.
[bpelc] .
[bpelc] [Posible corrección]: Si su dirección tiene un servidor proxy, tal vez tenga que configurar el servidor BPEL, el diseñador y el explorador con los valores de configuración del servidor proxy (consulte la nota técnica en http://otn.oracle.com/bpel para obtener instrucciones).
[bpelc] .
[bpelc]
I'm a little bit lost into this situation. Also I cannot identified which is the main issue here.
If somebody can give me some advice/orientation about this I would be very thankful.
Thanks a lot.
Jose

If you're using OC4J standalone, use the latest available OC4J, 10.1.3.3.
If you're using a manage OC4J, ie. Application Server, upgrade to the latest available version and upgrade your JDK. The provided JDK might be outdated.
--olaf

Error while reading wsdl file

I created and deployed a BPEL process with a JMS adapter and DB adapter.
I have tested this and it works fine.
After a few days, I try to open the project and the BPEL process, and click on the DB
adapter and it throws an exception on the designer :
"Error while reading wsdl file ... (wsdl file name) NULL Exception"
This is hard to debug as the exception does not provide any info, NULL.
This has happened several times for my project. The next time the JMS adapter hit the
same exception while opening on designer. This one I notice happened after I imported
a new schema file (xsd) into the BPEL process.
Only way around that I have for this currently is to delete and recreate the adapters, which as time
consuming as I have to re-create and re-assign a lot of the activities.
Has anyone encountered this and is there a way to fix this without deleting/recreating the adapters ?
Thanks.

I experienced the same issue and found the cause and a workaround;
"Error while reading wsdl file …. Exception: null"
http://www.petervannes.nl/files/b7c08911ce3cde3677e2182bbc5f032a-47.php
Edited by: 944333 on Jul 3, 2012 10:24 PM

Error reading configuration file

I've setup the Adobe Access 4.0 trial license server and when I run the Validator.bat with -g -r on the Tomcat install dir \licenseserver I get an 'Error reading configuration file' message. Here is the log dump:
[] 2012-12-20 22:46:32,176 INFO [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.context.SimpleContex tFactory] Creating class loader for partition 'flashaccessserver' with libraries '[file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/, file:/c:/Tomcat6/licenseserver/flashaccessserver/libs/flashaccess-license-server-ext-samp le.jar]'
[] 2012-12-20 22:46:32,582 ERROR [[Partition(flashaccessserver)].com.adobe.flashaccess.server.license.tools.Validator] Failed to validate tenant deployment 'flashaccessserver/sampletenant'
com.adobe.flashaccess.server.common.configuration.ConfigurationException: Error reading configuration file
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:139)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.TenantConfigurationImpl .<init>(TenantConfigurationImpl.java:110)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.CommonsConfigurationBas edFactory.getTenantConfiguration(CommonsConfigurationBasedFactory.java:90)
          at com.adobe.flashaccess.server.license.tools.Validator.validateTenantDeployment(Validator.j ava:255)
          at com.adobe.flashaccess.server.license.tools.Validator.validatePartitionDeployment(Validato r.java:283)
          at com.adobe.flashaccess.server.license.tools.Validator.validateGlobalDeployment(Validator.j ava:301)
          at com.adobe.flashaccess.server.license.tools.Validator.process(Validator.java:173)
          at com.adobe.flashaccess.server.license.tools.Validator.main(Validator.java:117)
Caused by: org.apache.commons.configuration.ConfigurationException: Unable to load the configuration
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:863)
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:821)
          at com.adobe.flashaccess.server.license.configuration.commonsadapter.Constants.parseTenantCo nfigurationStream(Constants.java:134)
          ... 7 more
Caused by: org.xml.sax.SAXParseException; lineNumber: 121; columnNumber: 16; cvc-complex-type.2.4.b: The content of element 'KeyServer' is not complete. One of '{"http://licenseserver.flashaccess.adobe.com/tenant":File}' is expected.
          at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.error(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator$XSIErrorReporter.reportErro r(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.reportSchemaError(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidComplexT ype(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.elementLocallyValidType(Unk nown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.processElementContent(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.handleEndElement(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.xs.XMLSchemaValidator.endElement(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unk nown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$FragmentContentDri ver.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(Unknown Source)
          at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unkno wn Source)
          at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
          at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
          at org.apache.commons.configuration.XMLConfiguration.load(XMLConfiguration.java:855)
          ... 9 more
I'm using a relative path to my .pfx file for both the transportServerCredential and licenseServerCredential in the flashaccess-tenant.xml and my password has been scrambled using the Scrambler.bat.
Also, when I verify setup using http://<LicenseServer>:8080/flashaccessserver/flashaccess/license/v2 I get the message 'License server is setup correctly.'
Any ideas of why the Validator.bat can't read the configuration file?

I agree with you that if I can successfully playback content the license serve is setup successfully. Here is what I've tried and how I've set things up:
I have my license server setup (its the Protected Streaming version).
I'm using Adobe Media Server as my content/packaging server. I successfully served Vanilla PHLS sample streams to the sample Adobe Access player on iOS devices.
I have configured the Adobe Media Server to point to the license server and certificates as per the documenation and this Adobe Dev article (http://www.adobe.com/devnet/adobe-media-server/articles/content-protection-using-phds-phls .html). Since I am using a trial version of Adobe Access my .der files are the same for transport and packaging.
I am using the local key mode to remove one more variable (I have setup a remote key server as well).
I have placed a copy of the 'vod-policy.pol' policy file from the reference license server resources directory in my Adobe Media Server 'creds' directory and used the relative path '..creds/vod-policy.pol' in the httpd.conf file.
When I attempt to load the sample stream http://<mymediaserver>/hls-vod/sample2_1000kbps.f4v.m3u8 using the Adobe Access sample player on my iOS device I receive the following errors in the player:
DRM error Major[3363] minor:[0] NSError:(null)]
From my knowledge of working with the Adobe Access Objective C library to create a PhoneGap plugin it appears that a decrypted playlist is not being returned by the Adobe Media Server. Additionally, I can find no information in the Adobe Media Server or Adobe Access logs that pertain to my setup.
I would love to have someone from Adobe speak to the problems I am having. I find the documentation to be hit and miss and most of my successful results during this proofing process have been from piecing together disparate pieces of information and trial and error. Information on using the Adobe Media Server with Adobe Access is limited to one Devnet article (above) and the help in Adobe Media Server that doesn't explain pathing to the license server or Java policy files in any detail.
Colour me frustrated

Failed to read wsdl file from url

Hi all,
I am struggling with WL 9.2, consuming a WSRP enabled portlet at the following point:
Having created a proxy portlet, refering to the WSDL of the WSRP producer, I did successfully deploy the portal. When accessing the portal and consuming the portlet the following exception is thrown:
com.bea.wsrp.faults.TransportException: Failed to read wsdl file from url due to -- java.net.ConnectException: Tried all: '8' addresses, but could not connect over HTTP to server: 'www.w3.org', port: '80';
The WSDL includes a schema (http://www.w3.org/2001/XMLSchema). The URL is definetely accessible by the server.
I am open for any kind of support ;) Thanks in advance!
Kind regards,
Matthias

Yes, they are all local schemas. The way ALSB works, even if the import path in the wsdl or parent schema doesn't exist, relative to the current directory, you can specify which schema resolves that reference. My WSDL imports several schemas, all of which import others. When I was done importing all the schemas and resolving references, all the references in WSDLs and XSDs were assigned and valid. However, after all of those imports and reference resolution, it still says the WSDL is invalid, with the following odd error message:
The WSDL is not semantically valid: Failed to read wsdl file from url due to -- java.net.MalformedURLException: no protocol: /XMLSchema/PaymentServices/Resources/PaymentServices-200802.
That path listed refers to one of the schemas imported by the WSDL. The reference to that schema in the WSDL was resolved, and it doesn't complain about that reference.

How to read WSDL File

Hi all,
I am new in web services...just started yesterday.. my client is provinding web services...I just need to send some data to them and retrieve data back...they are basically verifying addresses..if Address is not corrent then they will send the correct one back..I have no clue which method should I call and how to send data to them..below is my work that I have done so far...please help me...
///Below is the Client API that I have made...there is a bean file which I have made for Input Data...
import org.apache.axis.client.Call;
import org.apache.axis.client.Service;
import javax.xml.namespace.QName;
public class TestClient {
    public static void main(String [] args) {
       try {
         String endpoint = "http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress";
         Service service = new Service();
         Call     call    = (Call) service.createCall();
        call.setTargetEndpointAddress( new java.net.URL(endpoint) );
        call.setOperationName(new QName("http://m3group101.mnao.net/", "ValidateAddress"));
     call.setUsername("free");
     call.setPassword("account");
     AddressIn addressIn = new AddressIn();
        addressIn.Address1 = "6767 Friars Rd";
        addressIn.Address2 = "";
        addressIn.Address3 = "";
        addressIn.Address4 = "";
        addressIn.City = "SAN DIEGO";
        addressIn.StateProv = "CA";
        addressIn.PostalCode = "";
        addressIn.Country = "US";
        String ret = (String) call.invoke(new Object[] {"",""});      ////Here I donno what should I pass
        System.out.println("Sent DATA, got '" + ret + "'");
      } catch (Exception e) {
        System.err.println("Got Error While retrieving data "+e.toString());
///My Bean File Looks like this....
import java.io.*;
import java.util.*;
import java.util.ResourceBundle;
public class AddressIn {
    public String KeyValue;
    public String Address1;
    public String Address2;
    public String Address3;
    public String Address4;
    public String City;
    public String StateProv;
    public String PostalCode;
    public String Country;
    public AddressIn()
         KeyValue   = "";
         Address1   = "";
         Address2   = "";
         Address3   = "";
         Address4   = "";
         City       = "";
         StateProv = "";
         PostalCode = "";
         Country    = "";
    } // END constructor
} // END class AddressIn
import java.io.*;
import java.util.*;
import java.util.ResourceBundle;
public class AddressOut {
    public String KeyValue;
    public String Address1;
    public String Address2;
    public String Address3;
    public String Address4;
    public String City;
    public String StateProv;
    public String PostalCodeBase;
    public String PostalCodeAddOn;
    public String Country;
    public String Status;
    public String StatusCode;
    public String StatusDescription;
    public String Confidence;
    public String RecordType;
    public AddressOut()
         KeyValue   = "";
         Address1   = "";
         Address2   = "";
         Address3   = "";
         Address4   = "";
         City       = "";
         StateProv = "";
         PostalCodeBase = "";
         PostalCodeAddOn = "";
         Country    = "";
         Status     = "";
         StatusCode = "";
         StatusDescription = "";
         Confidence = "";
         RecordType = "";
    } // END constructor
} // END class AddressInPlease see the WSDL File...
<?xml version="1.0" encoding="UTF-8" ?>
- <wsdl:definitions targetNamespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns:intf="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns1="http://com.g1.dcg/services" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsd00="http://www.w3.org/2000/10/XMLSchema" xmlns:xsd99="http://www.w3.org/1999/XMLSchema">
- <wsdl:types>
- <schema targetNamespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
- <complexType name="ArrayOf_xsd_anyType">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="xsd:anyType[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
- <complexType name="ArrayOf_tns1_ServiceOption">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="tns1:ServiceOption[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
- <complexType name="ArrayOf_tns1_DataRow">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="tns1:DataRow[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
- <complexType name="ArrayOf_xsd_string">
- <complexContent>
- <restriction base="soapenc:Array">
<attribute ref="soapenc:arrayType" wsdl:arrayType="xsd:string[]" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" />
</restriction>
</complexContent>
</complexType>
</schema>
- <schema targetNamespace="http://com.g1.dcg/services" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/" />
- <complexType name="ServiceOption">
- <sequence>
<element name="key" nillable="true" type="xsd:string" />
<element name="value" nillable="true" type="xsd:string" />
</sequence>
</complexType>
- <complexType name="DataTableBean">
- <sequence>
<element name="columnNames" nillable="false" type="impl:ArrayOf_xsd_string" />
<element name="dataRows" nillable="true" type="impl:ArrayOf_tns1_DataRow" />
</sequence>
</complexType>
- <complexType name="DataRow">
- <sequence>
<element name="values" nillable="true" type="impl:ArrayOf_xsd_string" />
</sequence>
</complexType>
</schema>
</wsdl:types>
- <wsdl:message name="processResponse">
<wsdl:part name="arg0" type="tns1:DataTableBean" />
</wsdl:message>
- <wsdl:message name="processRequest">
<wsdl:part name="arg0" type="impl:ArrayOf_tns1_ServiceOption" />
<wsdl:part name="arg1" type="tns1:DataTableBean" />
</wsdl:message>
- <wsdl:portType name="G1Service">
- <wsdl:operation name="process" parameterOrder="arg0 arg1">
<wsdl:input message="impl:processRequest" name="processRequest" />
<wsdl:output message="impl:processResponse" name="processResponse" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ValidateAddressSoapBinding" type="impl:G1Service">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="process">
<wsdlsoap:operation soapAction="ValidateAddress" />
- <wsdl:input name="processRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" use="encoded" />
</wsdl:input>
- <wsdl:output name="processResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" use="encoded" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="ValidateAddress">
- <wsdl:port binding="impl:ValidateAddressSoapBinding" name="ValidateAddress">
<wsdlsoap:address location="http://m3group101.mnao.net:8080/jboss-net/services/ValidateAddress" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>I am receiving Exception " No Such Operation "
I am sorry but I don'n know how to read WSDL file...
thanks
Vish...
Message was edited by:
vishu007

Start going through the tutorials that come with Axis (you didn't state which version of Axis you're using btw, and there are major differences between them).
Anyway, the wsdl you list doesn't have an operation called "ValidateAddress". It has only one operation, called "process".
The call takes 2 arguments, as defined in the input message, and returns one value as defined in the output message.
Had you used Axis to generate your classes for you that would all have become quite obvious.

Error reading from file glibc-2.5-24.i686.rpm RHEL 5 Setup stuck at 80%

Hi, I am installing Oracle 10g on RHEL 5 (Red Hat Enterprise Linux 5) machine I am facing two problems
1) while installing the rpm packages the following package gave an error
Error reading from file glibc-2.5-24.i686.rpm
2) I still gave a try to runInstaller command the installer opened but was stuck at 80%
I have 3 GB ram and 320GB hard drive I am not sure what to put in the swap memory and other settings i blindly followed instructions given here
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
What could be the problem where do I find the error log if its created
Please help me
Thanks
Edited by: 891355 on Nov 6, 2011 12:06 PM

I found the installActions file in the installer folder and I think this could be the problem
INFO: The 'shiphomeproperties.xml' file is missing from shiphome location '/home/oracle/Desktop/database/install/../stage/products.xml.' Add this file to the 'Disk1/stage' directory of the shiphome.
though I am attaching the log file for more details do you think the installer is corrupt :(
InstallActions log file ==> http://www.mediafire.com/?nh7mx7bxqht9ovu
Edited by: 891355 on Nov 6, 2011 1:35 PM

\\Error Reading Rules File when dimbuild with DLR

Hi
I am using Essbase 11.1.2.1.
I create a DLR via the web console EAS (11.1.2.1 too) : a very simple one : dimbuild DLR, ";" as separator, 2 fields (parent and child)
when i try do do a "Update Ouline..." with a very simple file (1 line : accounts;test) I have this error message "\\Error Reading Rules File"
I don't know if it can help but if I create the same DLR on another 7.1 essbase serveur through this same wec eas console (11.1.2.1), I have no problem...
another information, too : my 11.1.2.1 server has a //ESS_LOCALE English_UnitedStates.Latin1@Binary ESSLANG. My 7.1 server has a //ESS_LOCALE French_France.ISO-8859-15@Default ESSLANG. I really don't know if there is a link, or absolutely not.
Thanks in advance for your help!
Fanny

unable to load essmsh.exe : the error message seems to indicate that it is a problem with a path in the environment variables.
So if you say that the "Error Reading Rules File" is typically a path issue, all is probably linked!
The admin will probably correct that tomorrow : I let you know if it solves the problem!
Thanks!
Fanny

Error reading product file driver files

When attempting apply a large merge patch I receive the following error:
Screening out files not valid for this installation...
Determining valid on-site files...
AutoPatch error:
The following file is missing:
/oracle/prodappl/pa/11.5.0/admin/driver/pasb038.drv
AutoPatch error:
Error reading product file driver files [complete; make tapes]
AutoPatch error:
Error determining valid on-site files
Any ideas?
I've tried using options=noprereq option, but that didn't help.

- Try to restore the file from a backup you have Or just copy it from any other environment.
- Make sure that you have included all pre-req patches in the merged file.
I've tried using options=noprereq optionBy this you tell adpatch not to check for pre-req, use 'options=prereq' instead.

Error reading zip file in Java 6

We have a bespoke installer program that fails, intermittently, in Java 6 on Windows. After installing some files, it then fails with a stack trace like this:
java.util.zip.ZipException: error reading zip file
     at java.util.zip.ZipFile.read(Native Method)
     at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
     at java.util.zip.ZipFile$ZipFileInputStream.read(ZipFile.java:447)
     at java.util.zip.ZipFile$1.fill(ZipFile.java:230)
     at java.util.zip.InflaterInputStream.read(InflaterInputStream.java:141)
     at java.io.FilterInputStream.read(FilterInputStream.java:90)
     at com.XXXX.trent.installer.Installer.writeStreamToFile(Unknown Source)
     at com.XXXX.trent.installer.Installer.installFile(Unknown Source)
     at com.XXXX.trent.installer.PatchFileInstaller.installFile(Unknown Source)
     at com.XXXX.trent.installer.PatchFileInstaller.installFiles(Unknown Source)
     at com.XXXX.trent.installer.UpgradeInstaller$TpfAction.run(Unknown Source)
     at com.XXXX.trent.installer.UpgradeInstaller.runActions(Unknown Source)
     at com.XXXX.trent.installer.UpgradeInstaller.install(Unknown Source)
     at com.XXXX.trent.installer.TrentInstall$SoftwareInstallStage.install(Unknown Source)
     at com.XXXX.trent.installer.TrentInstall$UpgradeInstallWorker.install(Unknown Source)
     at com.XXXX.trent.installer.PatchInstall$InstallWorker.construct(Unknown Source)
     at com.XXXX.trent.utils.SwingWorker$2.run(Unknown Source)
     at java.lang.Thread.run(Thread.java:619)The same code works in Java 5 on the same environments that it now fails in Java 6 (1.6.0_16).
Any ideas?
Thanks.

gimbal2 wrote:
it is not weird, it is a bug in the application. Don't let the upgrade from Java 5 to Java 6 make you believe otherwise.It's a singularly bad exception message though. I would have thought that something from java.util might be a bit more explicit about what the problem is.
Winston

Error reading project file : no protocol

I have followed the instructions exactly as in the j2ee tutiorial ,but, when I run asant , an error occurs:
: Error reading project file : no protocol: ../../common/targets.xml
Urgent!

Could you please provide a bit more detail such as which sample you are using? Also are you using the latest version of the tutorial and have you configured your build.properties in the samples/common directory?

Error reading Maya file

I was trying to import a camera into AE, but I encounted the error: AEGP Plugin MayaImport: Error reading Maya file. (5027::12)
Here's how I did:
Version of softwares:
Maya 2014 and 2013
After Effects CS6
System:
Windows 7 & Mac OS 10.6.8
I exported Camera and locator from a maya(.mb) file and save it as a .ma file. I baked all keyables of the camera.
Then I tried to import it into AE. and the error occured.
I tried different versions of maya and different systems, as I mentioned above. But the results were the same.
Does anybody know how to fix it? Or show me another way to import Maya's camera into AE?
Thanks!

Without seeing the actual Maya file nobody can say anything. Could simply need a manual editing of the file version info or some reformatting...
Mylenium

Error reading/writing file "com.garageband.cs":`≤Ä†». message

Hey all! Don't know if anyone can help but I keep getting the message...
" Error reading/writing file "com.garageband.cs":`≤Ä†». " with a cancel button.
If you click on it it does go away, but after a time playback starts skipping and stuff.
Anyone help please?
Thanks
Righini

first two things to try for “oddball” probs:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
(Let the page FULLY load. The link to your answer is at the top of your screen)

Error reading/writing file message when opening garageband and/or files

I've been recently getting this message when I open garageband and files
"Error reading/writing file\U201Ccom.apple.garageband.cs\U201D
I've been in and repaired disk permissions and all that it says it is all fine, reinstall garageband and message still comes up, weird.
not only is garageband being a nuisance, Mac OS X 10.6.2 is being a pain when shutting down telling me to restart the computer. This only happened since upgrading to 10.6. No one as yet knows this promble so I'm gonna have to ring apple and see what is going on here.
and also my other problem is that mac doesn't seem as snappy anymore I noticed this before upgrading to 10.6 and made no difference when "cleanly" installing 10.6. I get a colour wheel popping up and i'm having to wait with simple tasks. iMac only 2 years old.

i give up with this discussion forum no no one knows anything

Error reading wsdl file excepetion null

Similar Messages

Maybe you are looking for