Error resending messages with system-error in Adapter Engine

Hi all,
We got an error when trying to resend all messages in error in runtime workbench, message monitoring, adapter engine, database (overview), clicking on a sender service with messages in error state, and clicking on "repeat" button to resend those in error messages. The error is "No authorization to execute action for component Adapter Engine XP0". The user We are using to perform this task is associated to all groups available in CUA... some of you has any tips about how to perform this operation?
regards.
roberti

I really don't remember what solved this problem, but it is solved. Now the functionality works as it should.
Regards.
Waldemar Roberti

Similar Messages

EO Messages with Delivering Status in Adapter Engine

Hi All,
We have a scenario DB-DB Asy with Java Proxies. Proxies are there to accept the messages from Sender DB and insert in target DB. Get the response from target DB and insert back that to Sender DB.
Actually the scenario is Syn, but we made it as Asynchronous by implementing Java Proxies.
Now we are using EO mode in Sender JDBC channel. We have 17 interfaces in the similar pattern. We are using one common XI receiver channel for all these 17 interfaces.
If one message got struck, then rest other Proxies are not getting triggered and not able to resend the message ( ofcourse I know I cannot resend with Delivering Status). But not sure what causes the messages to failed with Delivering Status mode.
Any pointers would be highly appreciated.
Will increase of Parallel Queues really solve my problem? If it fails in Prod, its a big problem for us as we dont want to lose the data. Now everytime we are restarting the Message service server.
Regards,
Srinivas

Normally if there is any problem in target then you will see the adapter engine message as delivering
after the no of retires set then status will go to system error
during this entry check the CC used what is the error causing for that ?
HTH
Rajesh

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working?

Error in Adapter engine-"No_Spedin"

Hi All,
I have observed the below error in adapter engine today(System error).
JCO.Exception while calling /SEEAG/RELI_XI_EDIINH_FILE in remote system (RfcClient[PEQ_RFC_INBOUND]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Exception condition "NO_SPEDIN" raised.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException
The message is going to print Sumfax to SAP ECC.There are no errors in the mapping and the communication channel is also running fine.there was an upgrade in SAp recently after which i observe this error and it didnot exist before.
Can anybody please help me!

Hi Sudha
check Abhishek's Reply may be helpful at this thread for com.sap.aii.af.rfc.afcommunication.RfcAFWException
Re: Error during processing local bean: localejbs/RfcAFBean
also check the The Sender Agreement Interface , it is either missing or not correct in ID
Regards
Abhishek

Graphic Mapping:IDOC to File-Avoid Error in Adapter Engine

Hi all,
I'm using Graphic Mapping in my IDOC to File scenario in which each segment in source IDOC will generate a ROW in target File with the condition: DATBI >= currentdate (and some other conditions)
I have a UDF and use the mapping function CREATEIF for this purpose:
DATBI -> UDF -> CREATEIF -> ROW
Problem scenario: In the source IDOC if all the segments have DATBI < currentdate then there is no ROW created, and I get the error in Adapter Engine
Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure ...
How can I avoid this?
I've tried to put this condition using XPATH in Interface Determination and got the error.
There is a way to use function current-date() in XPATH condition?
Thanks for your help,
Elaine

Hi all,
How can I "suppress the row node if condition fails"? I'm new in PI, so please give more details.
My FCC as follows:
Record Structure: Record, Row
Row.addHeaderLine 0
Row.fieldSeparator ,
Record.fieldSeparator 'nl'
Row.endSeparator ; 'nl'
It works fine if the condition satisfied.
In Message Mapping, I've use Test to double check my mapping, and in the scenario that conditions fails, there is no Row in the target message.
Please advise.
Thanks,
Elaine

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

Getting message Attempt to determine which Adapter Engines......

Hello All
1. I am Getting System message 'Attempt to determine which Adapter Engines are affected by data changes failed' in the Integration Directory.
Updating SOAP Adapter (Sender channel).
Refreshed all caches...
2. Also while testing using SOAP Test client getting response
HTTP/1.1 500 Internal Server Error
connection: close
set-cookie: JSESSIONID=(XIServerName_03)ID1387309050DB21025913116517472411End; Version=1; Path=/
set-cookie: saplb_*=(XIServerName_03)31556950; Version=1; Path=/
server: SAP J2EE Engine/6.40
content-type: text/xml; charset=utf-8
any idea?
Thanks in advance

Hi Naveen
Thanks for your reply...
Actaully previously sender channel was working fine, i just updated the default namespace in the channel.
I was getting the error because of wrong namespace in channel (Case sensitive).
So i updated this name space and after activation i am getting above message while testing.
Regards

Message do not exists in adapter engine

I have a message being sent to IE via JMS Adapter . In Communication channel monitoring i could see the message Id & error message(Error in converting Binary message) but with that message id i could not find any entry in Message monitoring - > Adatpter Engine. Moreover , In communication channel monitoring the id with which the message failed is not hyperlinked to "Message Display Tool (Detail Display) ".
I need the message which is failed.
Thanks ,
Satish

It may be possible that message came into error as soon as it was picked by the sender channel. Could you see some error for these messages in Communication channel monitoring? Another possibility is your message is persisted in the adapter engine for very short duration. In that case, if it is archived, you may select the Archive option in Message Monitoring instead of Database option.
Regards,
Prateek

SYSTEM ERROR IN ADAPTER ENGINE

HI experts,
i have the scenario proxy ->xi--->third party
when i am trying to send the message from RWB->Adapter engine----->testmessage
it shows the following error in the communication channel
2011-04-13 03:35:13 Information The message was successfully received by the messaging system. Protocol: XI URL:
2011-04-13 03:35:13 Information Using connection SOAP_http://sap. Trying to put the message into the receive queue.
2011-04-13 03:35:14 Information Message successfully put into the queue.
2011-04-13 03:35:14 Information The message was successfully retrieved from the receive queue.
2011-04-13 03:35:15 Information The message status was set to DLNG.
2011-04-13 03:35:15 Information Delivering to channel: CC_Channel
2011-04-13 03:35:15 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-13 03:35:15 Error SOAP: call failed: java.net.UnknownHostException: hostname/port
2011-04-13 03:35:15 Information SOAP: sending a delivery error ack ...
2011-04-13 03:35:15 Information SOAP: sent a delivery error ack
let me what i need to do for this
thanks in advance
Edited by: katakoti on Apr 13, 2011 2:53 PM

Hi
thanks for your reply
i am able to send the data to that url through soap but when i am trying to use the xi to send the data it shows that error
1 .let me how we ping the host of that webservice in xi server
when i am using the proxy host and port it shows another error
SOAP: call failed: java.net.ConnectException: Connection timed out
so please advice me what actions will taken by the network guys
thanks in advance
Edited by: katakoti on Apr 14, 2011 1:20 PM

Error in Adapter engine in RWB

Hi,
I'm facing 2 type of issues in RWB,
Issue 1) Adapter Engine is in Red State in Component monitoring,
Error: Details for 'Is the Adapter Engine Running?'
Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.(Details: Code: MS.JOB.ARCHIVE; Location: com.sap.engine.messaging.impl.core.job.executor.ArchiveExecutor; Reason: java.io.IOException: The HTTP request of command "MODIFYPATH" did not reach the XMLDAS. This may indicate that the credentials for the HTTP destination have expired.; Time: 31.03.2011 00:00:05)Response from Adapter Engine: Fatal ArchiveJob (Archiving) failed.
2) If I click, any one of the option like Communication Channel monitoring, Engine Status etc, I'm getting the error
"Internet Explorer cannot display the webpage"
It seems to be the URL to open these component(Communication Channel monitoring, Engine Status etc ) is wrong. Fromwhere the URL address is taken? Where we need check the host name??
I searched in sdn, but could not find any related topics.
Kindly help me resolve this issue ASAP.
Thanks & Regards,
Baskaran K

Hi Baskaran,
For 1), did you check if the XML DAS communication user (used in destination "DASdefault") is configured correctly according to the documentation http://help.sap.com/saphelp_nwpi71/helpdata/EN/43/68fac39a363d33e10000000a11466f/frameset.htm and is assigned to the "XMLDASSecurityRole" role?
And check if you have configured the rules for your Archiving job (Component Monitoring -> Adapter Engine XIE -> Background Processing).
It seems the archiving does not work because of configuration issues.
An archiving job without rules means: all messages are relevant for archiving. The delete job will only delete messages which are not relevant for archiving. So it does not do anything in this system. It can lead to the database table keeps growing, if it's the case too.
You should check the archiving configuration so that the archiving job runs successfully.
If you do not want to archive the messages, please deactivate the archiving job. Then the delete job should clean the old messages with the next execution.
You may delete it straightly on the Background Processing.
For the 2), "Internet Explorer cannot display the webpage", try using the compatibility mode of your browser.
Regards,
Caio Cagnani

Adapter Engine alerts: Error in Adapter Engine

Hi All,
I have configured Alerts for <b>Adapter Engine</b>.
I am getting alerts with Alert Text as follows during Scenario runs - XML File to ABAP Proxy Scenario (Average size of files is in MB's) daily.
1.Error: DeliveryException: Problem inserting 6204b980-2f9d-11dc-9262-001635731444(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
2.Error: com.sap.engine.services.ts.exceptions.BaseSystemException: Exception ( SAP J2EE Engine JTA Transaction : [c1e757e003475] ) in rollback.
This error comes just <b>momentarily</b> and Messages (Files) are processed Successfully (No System Errors,etc at Adapter Engine).
I am not able to figure out the reason for this exception.
Expecting your valuable inputs.
Thanks.
Regards,
Sudharshan N A

Hi,
This happens sometimes when the adapter engine is on heavy load. Since the message is asynchronous, it is persistent. So it tries to write the message onto teh backend DB on which XI is involved. When teh load is more on the AE, the communication sometimes fails for a few milli seconds. This happens at times. Once it has enough capacity, it again preocesses the message successfully. It also happens sometimes that the message content will be lost. As of now, i am not sure if there is any solution for this.
reward if helpful.
Thanks,
sarath.

Reg: Error in adapter Engine Monitoring

Hi Guys,
In my RFC to File Scenario i got error as Adapter message property was configured was mandatory element but there is no Dynamic ocnfiguration elementin XI MEssage Header. This is occur in adapter engine monitoring in RWB.
Thanks

This error comes if you there is a problem in passing the file via dynamic configuration
for this if you want temporary solution like filename not necessarily be dynamic then go to receiver file adapter then
adapter specific message attributes deselect filed Failif file name does not.... sme option where you can uncheck the failure option
and in this case need to provide the filename and file will get generated with this filename if there is no filename generates using dynamic configuration
for this to resolve permanently then check the filename is passed or not to file adapter in moni in dynamicconfiguratuoin tab of callAdapter pipeline service
HTH
Rajesh

Handling large messages with MQ JMS sender adapter

Hi.
Im having trouble handling large messages with a MQ JMS sender adapter.
The messages are around 35-40MB.
Are there any settings I can ajust to make the communication channel work?
Error message is:
A channel error occurred. The detailed error (if any) : JMS error:MQJMS2002: failed to get message from MQ queue, Linked error:MQJE001: Completion Code 2, Reason 2010, Error Code:MQJMS2002
The communication channel works fine with small messages!
Im on SAP PI 7.11, MQ Driver is version 6.
Best Regards...
Peter

The problem solved itself, when the MQ server crashed and restarted.
I did find a note that might could have been useful:
Note 1258335 - Tuning the JMS service for large messages or many consumers
A relevant post as well: http://forums.sdn.sap.com/thread.jspa?threadID=1550399

Error in Adapter Engine

Hi Experts,
In the Component Monitoring, the ADAPTER ENGINE have a RED status, show the message:
Details for Ping Status
Message: Cannot construct correct URL for runtime check using entries in SLD for component af.pid.<hostname>; correct entries in SLD
Stacktrace:
com.sap.aii.rwb.exceptions.OperationFailedException: Cannot construct correct URL for runtime check using entries in SLD for component af.pid.<hostname>; correct entries in SLD
at com.sap.aii.rwb.core.XIJavaRTCComponent.getConnector(XIJavaRTCComponent.java:188)
at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:581)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:425)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:525)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:552)
at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:481)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any idea.
Tks in advance.

Hi Pedrão, how are you?
Look at Exchange Profile, if the entries about RWB are the same the entries in the SLD.
You can confirm the Technical System type Process/Exchange Integration and its application system is right.
Follow link about troubleshooting guide:
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/b0458509-49c1-2a10-1188-af2aeb97ed9a
Regards.
Bruno

Error resending messages with system-error in Adapter Engine

Similar Messages

Maybe you are looking for