*Error retrieving some or all of your defaults from the SAP SRM system*

NULL Value in field when user tries to update their MYDEFAULT personal details in the MYBUSINESS webportal
http://imageshack.us/photo/my-images/62/mydefaults.png/
Error retrieving some or all of your defaults from the SAP SRM system
SAP 640 GUi on WINXP
any ideas?

Hi,
Are you enable POP account in internal Exchange server or using POP from ISP outside?
Check File > Accounts Setting > Email > Select this account > Change > More Setting... > Outgoing Server tab > Check the first box: My outgoing server (smtp) requires authentication and don’t circle: Log on to incoming mail server before
sending e-mail.
If you are using check the LDAP, please also check the server address is correct or connection port is right.
If there is nothing wrong with your client. The problem could be on the mail server. Sometimes it could be due to maintain of the mail server of your recipient, and it is not available . You can give a try other time. If still failing, very possible the
email is no longer available.
Please let me know the result and feel free to post back.
Tony Chen
TechNet Community Support

Similar Messages

  • FIM 2010 R2 - Error 3000: " Some or all identity References could not be translated"

    Hi Everyone, I installedFIMPassword Resetand RegistrationService, butwhen I try tologinto the portal.
    I getthe following error.
    I followed the steps in "TestLab"and alsofollowed the instructionson the requirements ofFIMself-servicePasswordReset. 
    Greetings
    and thank you very much
    for
    your help.
    Error:
    An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)
    Go to Self-Service Password Registration home page
    An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)
    Details: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.SecurityIdentifier.Translate(IdentityReferenceCollection sourceSids, Type targetType,
    Boolean forceSuccess) at System.Security.Principal.SecurityIdentifier.Translate(Type targetType) at System.Security.Principal.WindowsIdentity.GetName() at System.Security.Principal.WindowsIdentity.get_Name() at Microsoft.IdentityManagement.CredentialManagement.Portal.Components.RegistrationDriver.GetDomainAndUserName(String&
    domain, String& userName) at Microsoft.IdentityManagement.CredentialManagement.Portal.Components.RegistrationDriver.InitiateRegistration() at Microsoft.IdentityManagement.CredentialManagement.Portal.Registration.Next() at System.Web.UI.WebControls.Button.OnClick(EventArgs
    e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint,
    Boolean includeStagesAfterAsyncPoint)

    I saw the log and it has the following: what could be happening?
    thank you so much for your time and help again. The user used is utest10. I see that time is wrong, because here is 9:00 o'clock but log show me 11:41 
    #Software: Microsoft Internet Information Services 7.5
    #Version: 1.0
    #Date: 2014-09-18 11:41:44
    #Fields: date time s-ip cs-method cs-uri-stem cs-uri-query s-port cs-username c-ip cs(User-Agent) sc-status sc-substatus sc-win32-status time-taken
    2014-09-18 11:41:44 10.0.0.8 GET / - 443 - 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    401 2 5 46
    2014-09-18 11:42:39 10.0.0.8 GET / - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    302 0 0 38093
    2014-09-18 11:42:39 10.0.0.8 GET /default.aspx CookiesEnabled=true 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    302 0 0 31
    2014-09-18 11:42:49 10.0.0.8 GET /default.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    200 0 0 10109
    2014-09-18 11:42:49 10.0.0.8 GET /css/core.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 15
    2014-09-18 11:42:49 10.0.0.8 GET /js/webkit.js - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 31
    2014-09-18 11:42:49 10.0.0.8 GET /js/Common.js - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 15
    2014-09-18 11:42:49 10.0.0.8 GET /ScriptResource.axd d=DhgbGNsDUTuISZAuj5YwF2bxQkEFxfOF-_jtkF_XsvkB-t51v01jftu5Ic-rAOU0i4QXvfJufGloBDNu0iH9xNVzZF7zsM5kwQiKgNA6SLmdT7RBdTHtFA3POY2lH5mDpuZacVugLTKgSH0dpWf06yy2LRQ1&t=ffffffff8dc250fc 443 LAB\utest10 10.0.0.15
    Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0) 200 0 0 15
    2014-09-18 11:42:49 10.0.0.8 GET /WebResource.axd d=SjOOqf6c3TZDDyM2Kgr6ykFHmew6stAqBAiKTyzeUwjxNX9Ub69YSe7iTN4RMBZZkeCqowFx_NF7PFeHmyyKusJLitg1&t=634605124860686371 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    200 0 0 15
    2014-09-18 11:42:49 10.0.0.8 GET /WebResource.axd d=h_nFu51-6JuBheHSoSNt4UAo_RSCKSB4UONIXu6fP0qij-WsPd8lhZo9XmgfpNWXHLOSIyvzVta7rfXGJkoOnwBaPVM1&t=634605124860686371 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    200 0 0 31
    2014-09-18 11:42:49 10.0.0.8 GET /css/customizable.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    404 0 2 15
    2014-09-18 11:42:49 10.0.0.8 GET /ScriptResource.axd d=EB3xsN3_OOC7dO7Is5VA_9RpzxmFLtDUT5ygJ5IV8nc_RAbqVnNxU1Md6FpX4PbdYTvG2G8uRfNIQ95EmhddZ1nGMFWEseAgPeUmfkbJ7bThY_221Pj8enNvYQ3xl86M5BKy8R_fXVyBg6E5KTwmu61Uzucdk3L87FFUJ7SFd_tBDoCV0&t=ffffffff8dc250fc 443
    LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    200 0 0 78
    2014-09-18 11:42:49 10.0.0.8 GET /css/Registration.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 218
    2014-09-18 11:42:49 10.0.0.8 GET /images/bg-top-slice.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 203
    2014-09-18 11:42:49 10.0.0.8 GET /images/fimlogo.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 203
    2014-09-18 11:42:49 10.0.0.8 GET /images/wait_animationa.gif - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 203
    2014-09-18 11:42:49 10.0.0.8 GET /images/bg-bottom-slice.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 203
    2014-09-18 11:43:19 10.0.0.8 POST /default.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    200 0 0 26781
    2014-09-18 11:43:19 10.0.0.8 GET /Error.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    200 0 0 31
    2014-09-18 11:43:19 10.0.0.8 GET /css/customizable.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    404 0 2 0
    2014-09-18 11:43:19 10.0.0.8 GET /CSS/troubleshooting.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 93
    2014-09-18 11:43:19 10.0.0.8 GET /css/error.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 62
    2014-09-18 11:43:19 10.0.0.8 GET /JS/troubleshooting.js - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 93
    2014-09-18 11:43:19 10.0.0.8 GET /images/copytoclipboard.gif - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 281
    2014-09-18 11:43:19 10.0.0.8 GET /images/sendemail.gif - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 265
    2014-09-18 11:43:19 10.0.0.8 GET /images/icon-error.png - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    304 0 0 265
    2014-09-18 11:43:24 10.0.0.8 GET /default.aspx - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    200 0 0 0
    2014-09-18 11:43:24 10.0.0.8 GET / - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    302 0 0 78
    2014-09-18 11:43:24 10.0.0.8 GET /css/customizable.css - 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    404 0 2 0
    2014-09-18 11:43:24 10.0.0.8 GET /default.aspx CookiesEnabled=true 443 LAB\utest10 10.0.0.15 Mozilla/4.0+(compatible;+MSIE+8.0;+Windows+NT+6.1;+WOW64;+Trident/4.0;+SLCC2;+.NET+CLR+2.0.50727;+.NET+CLR+3.5.30729;+.NET+CLR+3.0.30729;+Media+Center+PC+6.0)
    302 0 0 203

  • ITunes Match info says"With iTunes Match, you can download some or all of your music directly from iCloud on a total of up to 10 devices and computers." but when I try to add a computer it tells me i have reached my maximum of 5 computers.

    iTunes Match info says"With iTunes Match, you can download some or all of your music directly from iCloud on a total of up to 10 devices and computers." but when I try to add a computer it tells me i have reached my maximum of 5 computers.

    You have old computers authorized that you are no longer using more than likely.
    From http://www.apple.com/itunes/features/
    Authorize and Deauthorize
    Purchases you make from the iTunes Store can be played on up to five computers that you authorize using your iTunes Store account name and password. To authorize or deauthorize a single computer, choose Authorize This Computer or Deauthorize This Computer from the Store menu. If all five authorizations are being used, you can deauthorize all your computers at one time by choosing View My Account from the Store menu and selecting Deauthorize All.
    You can then restart the authorization process with each current device.

  • Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

    Hello
    I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
    deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
    industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
    message arose on my iPC:
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
    Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    NI-XNET:  (Hex 0xBFF63147) The database information on the real-time system has been created with an
    older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
    database to the real-time system. ========================= NI VeriStand:  NI VeriStand
    Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
    VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
    Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
    Definition file... • Connection with target Controller has been lost.
    The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
    almost the same. The only differences are:
    1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
    2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
    3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
    4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    1. LabVIEW Real-Time 11.0.1
    2. NI-488.2 RT 3.0.0
    3. NI_CAN 2.7.3
    Unfortunately the above stated problem still arose.
    What can I do to fix this problem?
    I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
    There it is written to deploy the dbc file againt.
    If this is a good hint, so how do I deploy a dbc file?
    I would feel very pleased if somebody could help me! :-)
    Best regards
    Lukas Nowak

    Hi Lukas,
    I think the problem is caused by differenet drivers for the CAN communication.
    NI provides two driver for CAN: NI-CAN and NI-XNET.
    NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
    You wrote:
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    3. NI_CAN 2.7.3
    NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
    Regards, stephan

  • HT4414 When I try to purchase Mountain Lion i get an error message:  "We could not complete your purchase.  The product distribution file could not be verified. It may be damaged or was not signed."  I can purchase other apps, why not Mountain Lion?

    When I try to purchase Mountain Lion i get an error message:  "We could not complete your purchase.  The product distribution file could not be verified. It may be damaged or was not signed."
    I can purchase other apps, why not Mountain Lion.   I get the same message on my wife's IMAC.

    The only thing that worked for me was to boot in safe mode.
    Power down.  Then press power button and hold 'shift' key until grey screen with progress bar appears... Once booted and logged in just open safari and browse to applestore. 
    No trouble at all once I did this.
    Hope it helps.

  • I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a iPod Nano, when it is connected to my laptop all my songs and books are there but when it is disconnected from laptop, some books and songs are missing from the library

    I have a simlar issue like this when loading my movies to my iTouch. iTunes says that all of your wanted content is sync and your iPod says that all content wasn't synced, is that what you are saying?

  • Hi. I clicked some snaps from my iphone and post that without copying it i restored the iphone with all apps etc available from the backup taken. How do i get back the photos which were clicked earlier. Is there a way to get it back?? Please help

    Hi. I clicked some snaps from my iphone and post that without copying it i restored the iphone with all apps etc available from the backup taken. How do i get back the photos which were clicked earlier. Is there a way to get it back?? Please help

    Yes i had not taken back up before restoring it. However i was just going through some links on the net and there is a software available for MAC to retrieve such lost data. But the point is will the said software work on iphone as the OS is not MAC..
    Will have to give a try to this. If successful will share it with all. Anyone else has any idea about this please so share.

  • Do not use iOS 7. Attempting to install iOS 7 will cause your phone to require a factory reset, thus wiping all your data from the device. Save your data, do not attempt to install the new iOS 7.

    Do not use iOS 7. Attempting to install iOS 7 will cause your phone to require a factory reset, thus wiping all your data from the device. Save your data, do not attempt to install the new iOS 7.

    My phone has been in the Preparaing Iphone for Restore mode for over 2 hrs. I have the following on the itunes page
                Iphone Recovery Mode
              Itunes is restoring the software on this Iphone. 
    I have the Itunes icon and the USB cord display on the iphone home screen
    So I still have 3 hrs to go???  WOW

  • HT1386 How do you sync your itunes from the Iphone to the macbook pro?

    How do you sync your itunes from the iphone to the macbook pro? 
    Let's say, I have an Iphone 3GS and it was synced to my older pc (I know...) and it crashed and I can't retrieve my files on there.  I want everything that I have on my 3Gs: photos, videos, music, notes, voice recordings, etc...  Now, I recently upgraded to 4Gs.  I can sync almost everything via icloud but there are files like photos, videos, other music that I cannot sync or for some weird reason it won't work over the cloud.  So I want to move all of those information to my macbook pro (upgraded from pc... yes!).  How do I move everything in my iphone backed up to my itunes in my mac book so that I can sync it to my new 4Gs? 

    I have a 3GS IPhone and have not been able to find Cloud on it anywhere (I was instructed to go to Settings, General, etc). I have also been told I should download update from I Tunes and have not been successful doing that either. I know my I Pad has the Cloud and I am wanting to sync the calendar from the phone to the pad. Any suggestions?

  • Some obsolete objects have been removed from the query. (QP0027)

    HI All,
    I'm Getting the below error whenever i try to export my Universe to the reposotory.
    "Some obsolete objects have been removed from the query. (QP0027)"
    I know what this error means but i need to know do i get out of it.
    I have to click ok N number of times to export this universe to Rep.
    I have more than 1300 objects in my univers and more than 100 tables.
    Please suggest how to fix this issue.
    Thanks,
    Ravichandra K

    >
    wavery wrote:
    > Hi Simon,
    >
    > Can you explain what you mean by "spin it off" if your Universe has more than 100 tables?
    >
    > Thanks
    Hi wavery, when you have more than 100 tables in the universe, the chance these tables are all used by the same functional group is very slim. When I say functional groups, I mean groups of users from, say Inventory Management Department or Financial Planning Department for example. You can then break up the humongous universe into multiple smaller universes that cater these functional groups. It makes the universes more manageable. When a universe gets too large, it becomes more and more difficult every time when you are trying to troubleshoot for problems.
    There are of course different schools of thought.  Some argue that you do not want to have to recreate the common objects, like date/time LOVs and condition objects or organizational hierarchy LOVs and condition objects (we have a whole bunch of those). The management in our company favored this school of thought, and that got us into big trouble. We have a universe that is so big and so complex that even the developers have difficulty figuring out which object is for what purpose. Then management came up with another idea of using link universes to provide self-service to the business users. And that did not go well either, but that is another story.
    Every company has different business needs. So there is no cookie-cutter formula. You have to sit down and review your business needs, and figure out what makes sense to break up the large universe into more manageable smaller size universes.
    Hope this helps. Please feel free to post again if you have further question.

  • Excise rate and value is not getting defaulted from the purchase order

    Hi all,
    While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
    Regards
    Vishal

    Hi,
    Follow STO Process for this;
    1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
    2. Assign this vendor to Delivering plant
    Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
    3. Create internal customer with the sales area of the vendor. Go To XD01
    4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
    5. Maintain condition records for the relevant pricing condition.
    6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
    7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
    8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
    Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
    9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
    Assign the document type NB to supplying plant and receiving plant
    10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
    11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
    10. Create Delivery: VL10G
    12. Picking, PGI: VL02N
    13. Billing: VF01
    Save the document and its done
    14. J1IIN - Outgoing Excise Invoice
    15. MIGO - Goods Receipt against outbound Delivery
    16. J1IEX - Capture & Post Excise Invoice
    Rgs

  • Error while reading the ID of own business system from the SLD for system

    Hello,
    I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
      <SAP:P1>ZTA</SAP:P1>
      <SAP:P2>013</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Can anybody help me?

    Probably, its due to incorrect RFC Adapter properties in config.
    Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click  on Service-->Adapter Specific Parameters.
    Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
    If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
    After this, you can retry sending the message.
    Rgds
    R Chandrasekhar

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Receiving an error when trying to remove P00 Security role from the user

    Hi All,
    I am receiving an error when trying to remove P00 Security role from the user.
    After logging on to GRC CUP, clicking on u201CCreate requestu201D, and filling out required information,
    I click on Select Roles/Groups
    On the next screen,
    I click on Existing Roles/Groups
    ERROR MESSAGE appears X Action failed and no roles appear in the box to select for removal.
    Regards,
    Vineet

    Hi Vineet,
    My be your selection is incorrect
    Try this
    in Applicaiton Area -- Select ALL
    Functional Area  -
    Select ALL
    Company           -
    Select ALL
    Role/Profile/Group Names --- Give p00* and execute the report
    if you give only p00 it wont give any result
    Hope this helps
    Thank you,
    Kishore

  • Retrieving Arrays from the SAP Adapter to BPEL

    Hello. I need to retrieve array of elements from the SAP Adapter to Oracle BPEL PM. There is some examples or tips that I can follow ?!
    Thanks in advance.

    SAP Adapter (of Oracle AS Adapters 10.1.2.0.0) can't talk to BPEL for outcome from SAP (see my note in Adapters forum: SAP Adapter Installation
    So you'll need to use InterConnect.
    Or there is another way.
    Write your own BAPI in SAP that check if there is new information in SAP to publish to BPEL and if there is some new information, return arrays of information as out parameters.
    Such BAPI you can periodically call from BPEL.
    If there'll be any new information to get from SAP, you'll get it in out parameter
    ;-))

Maybe you are looking for

  • No longer connects to my network automatically

    I've always been automatically connected to my AE network when logging on to my account or waking up from sleep while logged on but that's no longer true anymore. I now have to select the network from the airport icon in the menu bar. I'm not prompte

  • BAPI_SALESORDER_CHANGE to update reason for rejection of sales order item

    Hi, The FM BAPI_SALESORDER_CHANGE is not working properly as I am getting below error when try to update the reason for rejection at sales order item level. The delivery is done for this salesorder. Is it because the reason for rejection field is not

  • Deleting line item in scheduling agreement

    Hi , The scheduling agreement has 2 line items which are of same material. The first line item needs to deleted as it had the wrong price in it. We are able to block it but have not been able to set the deletion flag. There were a few GR and IR done

  • Bluetooth Keyboard response

    Hello, I have a new mac mini and new wireless keyboard (white with the contoured keys - if that matters). When I come back to the Mac after a break the keyboard is very erratic and sluggish. Keys reeeepeat and there is a huge lag between key press an

  • Router address to make my wireless secure

    My wireless has never been secure. I am trying to now make it secure but I can't find the IP address or router address for my Airport Express. I have checked the manual. I have searched the web. Any ideas?