Error running HW 5 Part 2...
When running HW 5 Part 2, the GPS will simply quit reporting. A look at the system monitor utility shows that it is still running, but it is not reporting anything. No errors shown, just not reporting anything.
If I stop the MIDlet and restart it (while the temperature sensor remains running) I get reports, but with each report I get the following error:
"report GPS Event: java.io.Exception: Timeout waiting for server to respond."
If I stop the GPS MIDlet and the temprature MIDlet and restart the GPS MIDlet, I have no problems. Also, if I just run the GPS MIDlet, there are no problems.
Am I having this problem due to some race condition between the temp sensor and the GPS sensor? If not, what do you think might be happening.
Thanks in advance.
Hello,
I am having what seems to be the same issue. I would like to add that I noticed this seems to correspond to the heap size exceeding its max value of 1740.5K.
If I leave the midlet running, it will eventually exhibit this issue well before 100 records are logged.
I placed some SOPs around and found that frequently getPosition() will return, but getVelocity() will not, just before cancel() get's called on the GPSSensorTask.
Could this all be due to a memory leak?
EDIT: I forgot to mention that this ultimately will end up with a java.lang.OutOfMemoryError (Stack trace incomplete).
Chad
Similar Messages
-
I am having trouble dating to version 3.6.14 or updating to the Beta testing. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb
Solved for me.
I set the owner/permissions of my profile's mozilla folder's (and all the files in it) to read/write access, and the problem disappeared.
in linux:''
* cd /home/myusername/.mozilla
* chown -cR myusername:mygroup ./
* chmod -cR +rw ./
'''Never do that with root privs (nor with sudo)''' -
Error run time DYNPRO_FIELD_CONVERSION
I have a dump:
Errore run-time DYNPRO_FIELD_CONVERSION
Verific. il 28.11.2007 h 02:12:16
A conversion error occurred.
Causa dell'errore
The current screen processing was terminated, since a situation
occurred from which it could not continue processing.
This is probably due to an error in the current screen of the ABAP
program.
Possibili soluzioni
Make a note of the actions and input which caused the error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Analisi errori
The program flow was interrupted and could not be resumed.
Program "SAPMM06B" tried to display fields on screen 0106. However, an
error occurred while this data was being converted.
Indic. per la correzione
A conversion error occurred while the program was trying to
display data on the screen.
The ABAP output field and the screen field may not have the
same format.
Some field types require more characters on the screen than
in the ABAP program. For example, a date field on a screen needs
two characters more than it would in the program. When attempting to
display the date on the screen, an error will occur that triggers the
error message.
Screen name.............. "SAPMM06B"
Screen number............ 0106
Screen field............. "EBAN-MENGE"
Error text............... "FX015: Sign lost."
Further data:
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
It is probably not possible to eliminate the system error
with ABAP alone.
If you have access to SAPnet, you can search for a relevant note
using the following keywords:
"DYNPRO_FIELD_CONVERSION" " "
"SAPMM06B" bzw. "MM06BO0R_RM06B-EPSTP"
"RM06B-EPSTP"
Ambiente sistema
SAP Release.............. "620"
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system......... "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 26
Short dump setting....... "full"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database owner........... "SAPR3"
Character set............ "it_IT.ISO8859-1"
SAP kernel............... "640"
Created on............... "Jul 16 2006 20:40:53"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "139"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
Utente, transazione.....
Client.............. 300
User................ "CONSULENTI"
Language key........ "I"
Transaction......... "ME52 "
Program............. "SAPMM06B"
Screen.............. "SAPMM06B 0106"
Screen line......... 26
Informazioni punto di interr.
The termination occurred in the ABAP program "SAPMM06B" in "RM06B-EPSTP".
The main program was "SAPMM06B ".
The termination occurred in line 14 of the source code of the (Include)
program "MM06BO0R_RM06B-EPSTP"
of the source code of program "MM06BO0R_RM06B-EPSTP" (when calling the editor
140).
The program "SAPMM06B" was started as a background job.
Errore verificatosi durante un'elaborazione Batch-Input
Dettaglio cd. sorgente
000010 *eject
000020 *----
000030 * Positionstyp aufbereiten *
000040 *----
000050 MODULE RM06B-EPSTP OUTPUT.
000060
000070 CALL FUNCTION 'ME_ITEM_CATEGORY_OUTPUT'
000080 EXPORTING
000090 PSTYP = EBAN-PSTYP
000100 IMPORTING
000110 EPSTP = RM06B-EPSTP
000120 PTEXT = T163Y-PTEXT.
000130
ENDMODULE.
Contenuto campi sistema
Cmpo SY Contenuto.................... Cmpo SY Contenuto....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY VU
SY-UCOMM
SY-TITLE Richiesta d'acquisto mod.: Riepilogo pos.
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Richiami/eventi attivi
N..... Tipo........ Nome..........................
Programma
Include Riga
Classe
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
Variabili selezionate
1 MODULE (PBO) RM06B-EPSTP
SAPMM06B
MM06BO0R_RM06B-EPSTP 14
DIEN DIEN
4444
495E
EBAN-PSTYP 0
3
0
LIM LIM
4442
C9D0
RM06B-EPSTP
2
0
POTE TXP
5552
4800
T163Y-PTEXT Standard
57666676222222222222
341E4124000000000000
Chiamate applicazione
Il dump non riporta informazioni relative
Informazioni applicazione
Il dump non riporta informazioni relative
Note interne
The termination occurred in the function "dynpconv.c" of the SAP
Basis System, specifically in line 701 of the module
"//bas/640_REL/src/krn/dynp/dybas.c#4".
The internal operation just processed is "ENDM".
The internal session was started at 20071128021215.
Application server....... "assapoa"
Network address.......... "10.58.19.23"
Operating system ........ "AIX"
Release.................. "5.2"
Hardware type............ "00CB585E4C00"
Database server.......... "ars005sapdb"
Database type............ "ORACLE"
Database name............ "PRD"
Database user ID......... "SAPR3"
Rich. attivi nel nucleo SAP
=> 64 bit R/3 Kernel
=> 64 bit AIX Kernel
=> Heap limit = unlimited
=> Stack limit = unlimited
=> Core limit = 1073741312
=> File size limit = unlimited
=> Heap address = 0x11dd952a0
=> Stack address = 0xfffffffffffa920
=> Stack low = 0xfffffffffffa920
=> Stack high = 0xffffffffffff910
=> Stack Trace:
AixStack() at 0x1000206bc
CTrcStack2() at 0x1000207b4
rabax_CStackSave__Fv() at 0x1001520d4
ab_rabax() at 0x10014ef04
dyHandleError() at 0x1005a6850
dypcnvoXt() at 0x100cbd6cc
dynplend() at 0x1010cf268
dynpmcal() at 0x1010c6f60
dynppbo0() at 0x1010c5134
dynprctl() at 0x1010ce40c
dynpen00() at 0x100bd0c30
Thdynpen00() at 0x1000a1f7c
TskhLoop() at 0x1000a5298
tskhstart() at 0x1000bb0d8
DpMain() at 0x101579ca0
nlsui_main() at 0x10154d428
__start() at 0x1000002fc
!!! Invalid stack address encountered: 0x0
!!! Stack corrupted.
Lista dei programmi ABAP in oggetto
Tipo
Programma
DataGen Ora
Dim.car.
Prg
SAPMM06B
25.09.2007 16:07:55
514048
Prg
SAPMSSYD
05.06.2002 17:09:33
16384
Prg
SAPFSYSCALLS
14.02.2002 14:22:47
6144
Typ
T160
12.05.1997 15:22:15
2048
Prg
SAPFMMEX
18.11.2007 09:34:59
177152
Typ
TSTCT
14.02.1998 14:31:34
2048
Typ
TMED
27.08.1994 21:59:16
2048
Typ
TPRG
14.02.1998 14:06:12
2048
Typ
T160D
11.02.2000 14:20:36
5120
Typ
T160V
14.05.1998 22:44:11
6144
Typ
T168T
28.08.1997 09:05:04
2048
Prg
SAPLMEXF
18.11.2007 09:35:00
166912
Typ
T162
02.10.2001 13:56:13
2048
Prg
SAPLSTUP
17.06.2004 12:05:43
65536
Prg
SAPLCNDP
17.06.2004 15:06:47
163840
Prg
SAPFGUICNTL
09.01.2003 17:18:52
20480
Prg
SAPLOLEA
17.06.2004 15:12:42
78848
Prg
SAPLSGUI
09.01.2003 17:15:12
31744
Prg
SAPLSTTM
17.06.2004 15:08:30
75776
Prg
SAPLSBDC
07.01.2003 18:31:25
38912
Prg
SAPLSFES
17.06.2004 15:15:58
174080
Prg
SAPLURFC
17.06.2004 14:25:28
16384
Prg
SAPLSPLUGIN
14.02.2002 14:22:48
6144
Typ
SWCBCONT
15.11.2000 17:55:11
3072
Typ
OLE_VERBS
04.04.1995 16:02:20
2048
Typ
OLE_PA
04.04.1995 16:02:19
2048
Prg
SAPLSCNT
14.02.2002 14:22:47
24576
Prg
SAPSHDTV
17.06.2004 11:46:16
28672
Typ
EBANW
17.06.2004 15:55:16
21504
Prg
CL_CONTEXTFIELD_MM============CP
25.09.2007 16:07:49
9216
Prg
/1BCDWBEN/SAPLMEN0000
18.11.2007 09:35:16
237568
Prg
SAPLSENA
17.06.2004 14:19:40
28672
Typ
EBAN
13.11.2006 11:19:59
20480
Prg
CL_PROCESS_STATE_MM===========CP
25.09.2007 16:07:50
16384
Prg
SAPLSWUG
17.06.2004 14:22:25
53248
Typ
SWCONT
04.04.1995 16:18:01
2048
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
2048
Prg
CL_GOS_MANAGER================CP
11.04.2001 13:02:00
17408
Prg
CL_GOS_VIEW_MANAGER===========CP
24.01.2002 20:31:22
22528
Typ
SIBFLPOR
15.11.2000 17:53:54
2048
Typ
SGOS_MVOBJ
24.07.2001 09:18:06
3072
Typ
BORIDENT
28.08.1997 08:38:50
2048
Prg
SAPLSUU1
17.06.2004 15:13:06
165888
Typ
USR02
17.06.2004 15:05:37
7168
Typ
USREFUS
07.01.2003 18:24:17
2048
Typ
SIBFLPORB
15.11.2000 17:53:55
2048
Prg
CL_GOS_TOOLBOX_MODEL==========CP
17.06.2004 15:04:37
38912
Typ
SGOS_MODL
24.07.2001 09:18:05
4096
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSWOR
17.06.2004 15:08:55
270336
Typ
SWOTRI
03.01.1996 15:29:13
2048
Typ
SWOTRETURN
20.08.1998 10:59:29
3072
Prg
SAPLSWOH
14.02.2002 14:22:48
7168
Typ
SWOTENV
11.02.2000 14:20:34
4096
Typ
TOJTD
15.11.1995 03:08:46
2048
Prg
SAPLRHS0
14.02.2002 14:22:47
11264
Prg
SAPLSDIFRUNTIME
17.06.2004 14:20:44
82944
Typ
DFIES
09.11.2000 14:07:05
8192
Typ
X031L
15.11.2000 18:03:28
5120
Prg
SAPLSDNT
17.06.2004 12:06:43
199680
Prg
SAPLSUGS
21.11.2002 10:20:02
29696
Typ
TOJTD
15.11.1995 03:08:46
2048
Typ
TOJTB
14.02.1998 14:02:55
8192
Typ
SWOTLI
04.04.1995 17:30:59
2048
Typ
T100
28.08.1997 09:04:45
2048
Prg
CL_EXITHANDLER================CP
17.06.2004 15:04:37
26624
Prg
CL_ABAP_TYPEDESCR=============CP
17.06.2004 14:19:33
21504
Prg
CL_ABAP_ELEMDESCR=============CP
17.06.2004 14:19:13
18432
Prg
CL_ABAP_DATADESCR=============CP
17.06.2004 14:19:13
14336
Prg
CL_ABAP_REFDESCR==============CP
17.06.2004 14:19:33
16384
Prg
CL_ABAP_STRUCTDESCR===========CP
17.06.2004 14:19:33
19456
Prg
CL_ABAP_COMPLEXDESCR==========CP
17.06.2004 14:19:13
13312
Prg
CL_ABAP_TABLEDESCR============CP
17.06.2004 14:19:33
17408
Prg
CL_ABAP_CLASSDESCR============CP
17.06.2004 14:19:33
23552
Prg
CL_ABAP_OBJECTDESCR===========CP
17.06.2004 14:19:33
25600
Prg
CL_ABAP_INTFDESCR=============CP
17.06.2004 14:19:13
19456
Prg
CL_ABAP_SOFT_REFERENCE========CP
29.03.2001 16:42:12
7168
Prg
CL_ABAP_REFERENCE=============CP
14.02.2002 14:22:46
6144
Prg
IF_EX_GOS_SRV_SELECT==========IP
04.12.2000 16:22:18
4096
Prg
%_CABAP
07.01.2003 18:31:23
23552
Typ
SXS_INTER
30.11.1998 15:55:16
2048
Prg
SAPLSEXV
17.06.2004 15:04:40
106496
Prg
CL_BADI_FLT_DATA_TRANS_AND_DB=CP
17.06.2004 15:04:37
33792
Typ
SXS_ATTR
20.08.2001 12:23:27
4096
Typ
V_EXT_ACT
09.11.2000 14:27:05
2048
Typ
SXC_EXIT
09.11.2000 14:23:43
2048
Prg
CL_EX_GOS_SRV_SELECT==========CP
17.06.2004 15:04:37
13312
Prg
%_CSXRT
17.06.2004 15:04:37
11264
Prg
CL_EXIT_MASTER================CP
17.06.2004 15:04:37
13312
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Typ
V_EXT_IMP
09.11.2000 14:27:05
2048
Prg
SAPLBDLS
17.06.2004 11:45:48
176128
Typ
T000
11.09.1997 10:17:18
4096
Typ
SWOTRTIME
14.02.1998 10:19:46
3072
Prg
%_CSWOB
14.02.2002 14:22:46
13312
Typ
SWOTINVOKE
14.02.1998 10:18:40
6144
Typ
SWOTLV
04.12.2000 14:59:45
10240
Prg
SAPLSWCD
17.06.2004 15:06:55
78848
Prg
RBUS2105
13.11.2006 11:20:02
57344
Prg
CL_GOS_PUBLICATION============CP
13.11.2000 16:31:37
15360
Prg
SAPLSGOSHIST
17.06.2004 14:23:50
46080
Typ
EBKN
16.06.2004 13:09:57
9216
Typ
T161
16.06.2004 13:14:35
5120
Typ
T161T
14.02.1998 10:55:58
2048
Typ
CMMDA
18.09.2001 10:02:31
4096
Prg
SAPLMMDA
04.09.2006 11:00:54
65536
Typ
TWLAD
13.08.1997 14:04:45
2048
Typ
TTXID
27.08.1999 17:40:33
3072
Prg
SAPLSTXD
17.06.2004 15:06:22
347136
Typ
STEXTNAME
18.09.2001 10:03:52
1024
Typ
STXDRID
26.02.1999 14:48:42
2048
Typ
STXDRLANG
26.02.1999 14:48:42
2048
Typ
STXDRNAME
26.02.1999 14:48:42
2048
Typ
STXDROBJ
26.02.1999 14:48:42
2048
Typ
THEAD
09.11.2000 14:15:08
6144
Prg
CL_ABAP_CHAR_UTILITIES========CP
07.01.2003 18:31:23
11264
Typ
STXH
17.06.2004 14:15:46
6144
Typ
TCATALOG
25.05.1998 12:19:20
3072
Typ
T168F
27.05.1992 20:16:27
3072
Typ
T168
27.05.1992 17:53:38
3072
Prg
SAPLMECCP
25.09.2007 16:07:53
39936
Prg
CL_BADI_MM====================CP
08.01.2003 16:43:11
9216
Prg
%_CCXTAB
14.02.2002 14:22:46
6144
Prg
SAPLEINH
25.09.2007 16:07:53
56320
Typ
T001W
16.06.2004 13:14:17
9216
Prg
SAPLVDAT
19.02.2002 12:59:51
25600
Typ
T163Y
28.08.1997 09:05:01
2048
Prg
SAPCNVE
14.02.2002 14:22:47
6144
Prg
SAPLOMCV
17.06.2004 10:54:26
16384
Prg
CL_EX_BADI_MATN1==============CP
17.06.2004 10:27:52
22528
Prg
IF_EX_BADI_MATN1==============IP
17.06.2004 10:53:59
4096
Typ
TMCNV
24.02.1999 03:33:25
3072
Typ
RM06B
17.06.1998 03:23:02
10240
Lista tabelle interne
Il dump non riporta informazioni relative
Indice delle tabelle applicative
Programma
Nome................ Contenuto..1.......2........3........4........5....+....
SAPMM06B
SYST |00000000000x010000000000000000
EBAN |300001100895000010NB B NB 1 Elena Varett20071
*EBAN | 00000 00000
EBKN | 0000000 00000000 000000x0C
AEBAN |3000011008950NB BBEUR |
EBANW |300001100895000010NB B NB 1 Elena Varett20071
RM06B | 00000000000000000010 00
*RM06B | 00000000000000000000 00
RM06E | 000000000000000 00000000 00000
TPRG |300IW2Formato settimana Sett. |
T001W |3006 PIATTAFORMA DI LEINI' 6 CEDI6 0000000
T023 |
T024 |
T160 |300ME52 VB B |
T160V |300C1XX A XX X X |
T161 |300BNB 000100102NBB NB 00000
T161T |300INB BRichiesta d'acquisto|
T168 |300B AB *** 1 106 0x0C0x0C0x0C0x0C|
T168F |300B AB XXX |
T168T |300IB0106002 |
TTXID |EBAN B04 X
T163K | |
T163Y | Standard |
T001L |
T160D | XXXXXXXXXXXXXXXXXXXXXX
T161E | |
SAPFMMEX
TMED |300BB |
SAPLMEXF
T161 |300BNB 000100102NBB NB 00000
T162 |300PT0B ...................................
SAPLSUU1
USR02 |300CONSULENTI ÷x9Fw'x97[æÆ0000000000000000A
USREFUS |300CONSULENTI
SAPLSWOR
TOJTB |BUS2105 XI RBUS2105
SWOTLV |BUS2105 EXISTENCECHECK M
TOJTD | |
SAPLBDLS
T000 |300Mandante produzione Arenzano EUR
SAPMM06B
*RM06E | 000000000000000 00000000 00000
MARA | 00000000 00000000
T006 | 00 00000000000000x0C 0
SAPLVDAT
TPRG |300IW2Formato settimana Sett. |
SAPLOMCV
TMCNV |300MATCONV 0x120000000x12
Directory delle tabelle applicative (inf. di gestione)
Programma
Nome.......................... tempo..........lungh....
SAPLOMCV
SYST 20010612125650 00002404
EBAN 20061113111959 00000892
*EBAN 20061113111959 00000892
EBKN 00000421
AEBAN 20000323224119 00000027
EBANW 00000896
RM06B 20000323224119 00000529
*RM06B 20000323224119 00000529
RM06E 20020124202505 00001154
TPRG 20000323231030 00000032
T001W 20040617141548 00000338
T023 20040616131428 00000102
T024 20040616131429 00000352
T160 00000035
T160V 00000050
T161 20040616131435 00000095
T161T 00000029
T168 00000035
T168F 00000044
T168T 00000013
TTXID 00000058
T163K 20000323230840 00000023
T163Y 00000026
T001L 20000323230832 00000069
T160D 00000069
T161E 20000323230840 00000025
SAPFMMEX
TMED 00000010
SAPLMEXF
T161 00000095
T162 00000234
SAPLSUU1
USR02 00000226
USREFUS 00000067
SAPLSWOR
TOJTB 00000453
SWOTLV 00000701
TOJTD 00000033
SAPLBDLS
T000 00000107
SAPMM06B
*RM06E 20020124202505 00001154
MARA 20071118093457 00001118
T006 20001109142345 00000080
SAPLVDAT
TPRG 00000032
SAPLOMCV
TMCNV 00000062
Blocchi di contr. CONT ABAP
Include Riga Codice sorg.
Ind. Nome FI Co Par01 Par2. Par3. Par4. Tab.
MM06BO0R_RM06B-EEIND 25 EXIT.
2502 BRAX 00
MM06BO0R_RM06B-EEIND 27 ENDSELECT.
2503 BRAX 00
2504 SQLS 08
MM06BO0R_RM06B-EEIND 31 ENDMODULE.
2505 ENDM 00
2506 -
MM06BO0R_RM06B-EPSTP 7 CALL FUNCTION 'ME_ITEM_CATEGOR
2507 FUNC 00
2508 FUNC 00
2509 PAR2 02 0336
2511 FUNC 10
2512 PAR2 01 03B9
2514 PAR2 01 03BA
2516 FUNC FF
MM06BO0R_RM06B-EPSTP 14 ENDMODULE.
>>>>> ENDM 00
2518 -
MM06BO0V_VRTKZ 6 CASE EBAN-VRTKZ.
2519 BREL 04
MM06BO0V_VRTKZ 7 WHEN '1'.
2520 when 00 02 0090
2522 BRAN 02
2523 BRAX 00
MM06BO0V_VRTKZ 8 RM06B-MKNTW = '3 '. "3 Nachkom
2524 MOVL 00 02 0136
MM06BO0V_VRTKZ 9 WHEN '2'.
2526 BRAX 00
Fine dell'analisi err. run-time
Help me.
Thank youHello Maurizio,
Thre screen field EBAN-MENGE is unable to handle a sign along with the value.
Regards,
Ammey Kesarkar -
Hello,
I currently having a series of errors (18 issues) that are occurring under the below Correlation ID ad1a22f5-1ddb-4fa5-8487-143cb6fd0f9d
I have listed (3) that are in the Web Parts category, this error/issue is causing several timed job to no longer work properly I have been trying to find the root cause for about a week now. If anyone has encountered a issue
such as this one I'm open for suggestions.
(1)
Error while executing web part: System.Xml.Xsl.XslLoadException: XSLT compile error. An error occurred at (1,475). ---> System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest
asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception
stack trace --- at System.Net.HttpWebRequest.GetResponse() at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) at System.Xml.XmlUrlResolver.GetEntity(Uri
absoluteUri, String role, Type ofObjectToReturn) at Microsoft.SharePoint.WebPartPages.WSSXmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) at System.Xml.Xsl.Xslt.XsltLoader.CreateReader(Uri
uri, XmlResolver xmlResolver) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(Uri uri, Boolean include) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include)
--- End of inner exception stack trace --- at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include) at System.Xml.Xsl.Xslt.XsltLoader.Load(Compiler compiler, Object stylesheet, XmlResolver
xmlResolver) at System.Xml.Xsl.Xslt.Compiler.Compile(Object stylesheet, XmlResolver xmlResolver, QilExpression& qil) at System.Xml.Xsl.XslCompiledTransform.CompileXsltToQil(Object stylesheet, XsltSettings
settings, XmlResolver stylesheetResolver) at System.Xml.Xsl.XslCompiledTransform.LoadInternal(Object stylesheet, XsltSettings settings, XmlResolver stylesheetResolver) at System.Xml.Xsl.XslCompiledTransform.Load(XmlReader
stylesheet, XsltSettings settings, XmlResolver stylesheetResolver) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.LoadXslCompiledTransform(WSSXmlUrlResolver someXmlResolver) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.GetXslCompiledTransform()
at Microsoft.SharePoint.WebPartPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform)
(2)
InnerException 1: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according
to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[]
buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean
receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData)
at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback,
Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async) --- End of inner exception stack trace --- at System.Net.HttpWebRequest.GetResponse()
at System.Xml.XmlDownloadManager.GetNonFileStream(Uri uri, ICredentials credentials) at System.Xml.XmlUrlResolver.GetEntity(Uri absoluteUri, String role, Type ofObjectToReturn) at Microsoft.SharePoint.WebPartPages.WSSXmlUrlResolver.GetEntity(Uri
absoluteUri, String role, Type ofObjectToReturn) at System.Xml.Xsl.Xslt.XsltLoader.CreateReader(Uri uri, XmlResolver xmlResolver) at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(Uri uri, Boolean include)
at System.Xml.Xsl.Xslt.XsltLoader.LoadStylesheet(XmlReader reader, Boolean include)
(3)
InnerException 2: System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure. at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest
asyncRequest, Exception exception) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer,
AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest) at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult
lazyResult) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result) at System.Net.TlsStream.Write(Byte[]
buffer, Int32 offset, Int32 size) at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size) at System.Net.ConnectStream.WriteHeaders(Boolean async)Hello,
It seems that issue is related to certificate. Could you please upload certificate to central admin and make it trust.
Just try this and see the result:
http://social.technet.microsoft.com/Forums/en-US/cbc58585-1673-4c91-b8c1-1b95c339bbb7/could-not-establish-trust-relationship-for-the-ssltls-secure-channel?forum=fastsharepoint
http://social.msdn.microsoft.com/Forums/en-US/7a7e56ba-6e95-4a84-9384-791818cce89d/the-underlying-connection-was-closed-could-not-establish-trust-relationship-for-the-ssltls-secure?forum=sharepointdevelopmentprevious
http://www.infotext.com/help/sharepoint-could-not-estabilish-trust-relationship-for-the-ssltls-secure-channel-when-crawling-ssl-enabled-websites/
If still face the issue then tell us more about your webparts and also confirm if you are facing same problem to other page and site.
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
Autopatch - Error running adutlrcmp.pls in adprdcAdUtilrcmp()
Hi,
We have recently migrated our EBS 10g database from 32 bit RHEL4 server to 64 bit OEL5 server.
All the apps servers are runing on 32 bit RHEL 4 server.
After migrating all apps services are working fine.
Now i am trying to upgrade the database to 11g.
As part of that, applied 11g Release 2 interoperability patch for 11.5.10 (8815204).
The patch log file shoing the below error while compiling invalid objects.
===============================================
Running utl_recomp.recomp_parallel(8), if it exists
OWNER NUM_INVALID
PORTAL30_SSO 1
PUBLIC 26
CTXSYS 5
OLAPSYS 28
GRCMP 1
APPS 408
PORTAL30 30
7 rows selected.
Elapsed: 00:00:00.23
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.01
STATUS_MESSAGE
Running UTL_RECOMP.RECOMP_PARALLEL...
declare
ERROR at line 1:
ORA-03113: end-of-file on communication channel
memory exhausted
ORA-24323: value not allowed
Error accessing package DBMS_APPLICATION_INFO
ERROR:
ORA-03114: not connected to ORACLE
memory exhausted
memory exhausted
AutoPatch error:
Error running adutlrcmp.pls in adprdcAdUtilrcmp()
An error occurred while compiling invalids using the SYS.UTL_RECOMP() package.
Ignoring the failure and continuing...
==========================================================
What is the reason for this? Is it due to 32 bit and 64 bit diff?
How can i solve this issue?
Thanks,While running adutlrp.sql below error occured
===================================
DOC> 1. Query showing jobs created by UTL_RECOMP
DOC> SELECT job_name FROM dba_scheduler_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>
DOC> 2. Query showing UTL_RECOMP jobs that are running
DOC> SELECT job_name FROM dba_scheduler_running_jobs
DOC> WHERE job_name like 'UTL_RECOMP_SLAVE_%';
DOC>#
DECLARE
ERROR at line 1:
ORA-03113: end-of-file on communication channel
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of objects that have compiled
DOC> with errors (objects that compile with errors have status set to 3 in
DOC> obj$). If the number is higher than expected, please examine the error
DOC> messages reported with each object (using SHOW ERRORS) to see if they
DOC> point to system misconfiguration or resource constraints that must be
DOC> fixed before attempting to recompile these objects.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
DOC> The following query reports the number of errors caught during
DOC> recompilation. If this number is non-zero, please query the error
DOC> messages in the table UTL_RECOMP_ERRORS to see if any of these errors
DOC> are due to misconfiguration or resource constraints that must be
DOC> fixed before objects can compile successfully.
DOC>#
ERROR:
ORA-03114: not connected to ORACLE
====================================================
SQL> select * from UTL_RECOMP_ERRORS
2 ;
OBJ#
ERROR_AT
COMPILE_ERR
158557
25-SEP-11 06.22.23.008812 AM
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_PSTORE_EX
ORA-00980: synonym translation is no longer valid
158558
25-SEP-11 06.22.23.011485 AM
OBJ#
ERROR_AT
COMPILE_ERR
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_API
ORA-00980: synonym translation is no longer valid
158559
25-SEP-11 06.22.23.013549 AM
ORA-04045: errors during recompilation/revalidation of PORTAL30.WWSSO_API_PRIVAT
E
OBJ#
ERROR_AT
COMPILE_ERR
ORA-00980: synonym translation is no longer valid
1608837
25-SEP-11 06.23.17.180561 AM
ORA-04045: errors during recompilation/revalidation of GRCMP.HFM_TMP_ORGANIZATIO
N_D
ORA-00980: synonym translation is no longer valid
OBJ#
ERROR_AT
COMPILE_ERR
SQL>
===================================================================
why ORA-03113: end-of-file on communication channel error occured? Please advise.
All PORTAL objects are invalid after migrating to 64 bit.
Thanks, -
JVM SIGSEGV error running Java 1.5.0_01 on linux
Three times last week we had the JVM come down hard with a SISSEGV error running our web application. Each crash was on a different machine. The offending thread was always in libnet.so shared library handling either a getHostByAddr() or getLocalHostName() call. I included a portion of one of the JVM dumps below. In the other two cases we are in either an Oracle JDBC driver or a SQL Server JDBC driver (tds).
We are not able to issolate and reproduce this problem at will. This is happening in our QA environment and we are planning to go to production soon. Any ideas or information would be most helpful.
We've just decided to upgrade to Java 1.5.0_04 in the hope it might help this problem. Too early to tell if this is making a difference or not.
The JVM is running Tomcat 5.5.9.
OS:Red Hat Enterprise Linux AS release 3 (Taroon Update 2)
vm_info: Java HotSpot(TM) Server VM (1.5.0_01-b08) for linux-x86, built on Dec 6 2004 19:33:50 by java_re with gcc 3.2.1-7a (J2SE release)
Thanks for your attention.
--Brad
first part of jvm dump follows:
# An unexpected error has been detected by HotSpot Virtual Machine:
# SIGSEGV (0xb) at pc=0x007737b9, pid=16179, tid=122411952
# Java VM: Java HotSpot(TM) Server VM (1.5.0_01-b08 mixed mode)
# Problematic frame:
# C [libc.so.6+0x797b9] memchr+0x29
--------------- T H R E A D ---------------
Current thread (0xb192d0f0): JavaThread "http-80-Processor25" daemon [_thread_in_native, id=16341]
siginfo:si_signo=11, si_errno=0, si_code=1, si_addr=0xb0bfe0c2
Registers:
EAX=0xb0bfe0c2, EBX=0x0082ea98, ECX=0x00000a0a, EDX=0x0a0a0a0a
ESP=0x074bcae8, EBP=0x074bcb14, ESI=0x00000036, EDI=0x000003e7
EIP=0x007737b9, CR2=0xb0bfe0c2, EFLAGS=0x00010202
Top of Stack: (sp=0x074bcae8)
0x074bcae8: 000003e7 00000036 0075ae2b b0bfe0c2
0x074bcaf8: 0000000a 00000036 b0bff038 074bcc48
0x074bcb08: 0082ea98 b2f87428 074bcc48 074bcb38
0x074bcb18: 0075adb3 b2f87428 074bcc48 000003e7
0x074bcb28: 0000000a 00000001 00000000 0082ea98
0x074bcb38: 074bcb64 00763ebb b2f87428 074bcc48
0x074bcb48: 000003e7 0000000a 00000001 00000000
0x074bcb58: 0011c3a4 074bcc48 000003e8 074bcbb0
Instructions: (pc=0x007737b9)
0x007737a9: 89 d1 c1 e2 10 66 89 ca a8 03 0f 84 cd 00 00 00
0x007737b9: 38 10 0f 84 67 01 00 00 40 4e 0f 84 3f 01 00 00
Stack: [0x0747d000,0x074be000), sp=0x074bcae8, free space=254k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [libc.so.6+0x797b9] memchr+0x29
C [libc.so.6+0x60db3] IOgetline+0x43
C [libc.so.6+0x69ebb] fgets_unlocked+0x5b
C [libnss_files.so.2+0x4b14] nssfiles_gethostbyaddr_r+0x184
C [libc.so.6+0xef7ed] gethostbyaddr_r+0xdd
C [libnet.so+0x5321] Java_java_net_Inet4AddressImpl_getHostByAddr+0x10d
j java.net.Inet4AddressImpl.getHostByAddr([B)Ljava/lang/String;+0
j java.net.InetAddress$1.getHostByAddr([B)Ljava/lang/String;+4
j java.net.InetAddress.getHostFromNameService(Ljava/net/InetAddress;Z)Ljava/lang/String;+7
j java.net.InetAddress.getHostName(Z)Ljava/lang/String;+10
j java.net.InetAddress.getHostName()Ljava/lang/String;+2
j org.apache.coyote.http11.Http11Processor.parseHost(Lorg/apache/tomcat/util/buf/MessageBytes;)V+38
j org.apache.coyote.http11.Http11Processor.prepareRequest()V+794So, we started getting this problem again in production (on 1.5.0_06, even).
Following up on Dan Paum's report, I dug around a little deeper:
~/java/old/java/net$ javap Inet4AddressImpl
Compiled from "Inet4AddressImpl.java"
class java.net.Inet4AddressImpl extends java.lang.Object implements java.net.InetAddressImpl{
java.net.Inet4AddressImpl();
public native java.lang.String getLocalHostName() throws java.net.UnknownHostException;
public native byte[][] lookupAllHostAddr(java.lang.String) throws java.net.UnknownHostException;
public native java.lang.String getHostByAddr(byte[]) throws java.net.UnknownHostException;
public synchronized java.net.InetAddress anyLocalAddress();
public synchronized java.net.InetAddress loopbackAddress();
public boolean isReachable(java.net.InetAddress, int, java.net.NetworkInterface, int) throws java.io.IOException;
Both anyLocalAddress() and loopbackAddress() are synchronized, but not getLocalHostName(). The native code for getLocalHostName() calls gethostbyaddr_r in lieu of synchronization. gethostbyaddr_r is a non-standard, non-portable call that, judging from a brief trawl through Google, has historically been problematic for multi-platform code.
I'm guessing this bug is another such problem.
I extracted Inet4AddressImpl.java from src.zip in the JDK, changed the declaration, compiled, and "updated" the modified version into lib/rt.jar:
~/java/new/java/net$ javap Inet4AddressImpl
Compiled from "Inet4AddressImpl.java"
class java.net.Inet4AddressImpl extends java.lang.Object implements java.net.InetAddressImpl{
java.net.Inet4AddressImpl();
public synchronized native java.lang.String getLocalHostName() throws java.net.UnknownHostException;
public native byte[][] lookupAllHostAddr(java.lang.String) throws java.net.UnknownHostException;
public native java.lang.String getHostByAddr(byte[]) throws java.net.UnknownHostException;
public synchronized java.net.InetAddress anyLocalAddress();
public synchronized java.net.InetAddress loopbackAddress();
public boolean isReachable(java.net.InetAddress, int, java.net.NetworkInterface, int) throws java.io.IOException;
So far, so good. I will stress test this over the next few days, and if it works, I'll open a bug in the bug database to get this fixed. -
Hey,
did anybody ever face this problem? I am working on it since hours, but cannot find any solution. my wsdl was generated from websphere studio
application developer 5.1.2. and now I run wscompile and get these error
messages.
when I compile my wsdl to get the client side artifacts like stub, etc and I get the following error message:
error: in message "SystemSupportException", part "fault" must specify a "element" attribute
the whole stack looks like this:
in message "SystemSupportException", part "fault" must specify a "element" attri
bute
at com.sun.xml.rpc.processor.modeler.wsdl.WSDLModelerBase.handleLiteralS
OAPFault(WSDLModelerBase.java:1893)
at com.sun.xml.rpc.processor.modeler.wsdl.WSDLModelerBase.processSOAPOpe
rationRPCLiteralStyle(WSDLModelerBase.java:1764)
at com.sun.xml.rpc.processor.modeler.wsdl.WSDLModelerBase.processSOAPOpe
ration(WSDLModelerBase.java:663)
at com.sun.xml.rpc.processor.modeler.wsdl.WSDLModelerBase.processPort(WS
DLModelerBase.java:548)
at com.sun.xml.rpc.processor.modeler.wsdl.WSDLModelerBase.processService
(WSDLModelerBase.java:385)
at com.sun.xml.rpc.processor.modeler.wsdl.WSDLModelerBase.internalBuildM
odel(WSDLModelerBase.java:238)
at com.sun.xml.rpc.processor.modeler.wsdl.WSDLModelerBase.buildModel(WSD
LModelerBase.java:146)
at com.sun.xml.rpc.processor.config.ModelInfo.buildModel(ModelInfo.java:
85)
at com.sun.xml.rpc.processor.Processor.runModeler(Processor.java:61)
at com.sun.xml.rpc.tools.wscompile.CompileTool.run(CompileTool.java:571)
at com.sun.xml.rpc.util.ToolBase.run(ToolBase.java:40)
at com.sun.xml.rpc.tools.wscompile.Main.main(Main.java:22)
error: in message "SystemSupportException", part "fault" must specify a "element
" attribute
my wsdl:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://core.rbac.csap2" xmlns:impl="http://core.rbac.csap2" xmlns:intf="http://core.rbac.csap2" xmlns:tns2="http://exceptions.csap2" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema targetNamespace="http://core.rbac.csap2" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:impl="http://core.rbac.csap2" xmlns:intf="http://core.rbac.csap2" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<element name="sessionId" nillable="true" type="xsd:string"/>
<element name="name" nillable="true" type="xsd:string"/>
<element name="password" nillable="true" type="xsd:string"/>
<element name="loginAndCreateSessionReturn" nillable="true" type="xsd:string"/>
</schema>
<schema targetNamespace="http://exceptions.csap2" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:impl="http://core.rbac.csap2" xmlns:intf="http://core.rbac.csap2" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<complexType name="SystemSupportException">
<complexContent>
<extension base="tns2:CSAP2Exception">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="CSAP2Exception">
<sequence>
<element name="message" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
<element name="SystemSupportException" nillable="true" type="tns2:SystemSupportException"/>
</schema>
</wsdl:types>
<wsdl:message name="SystemSupportException">
<wsdl:part name="fault" type="tns2:SystemSupportException"/>
</wsdl:message>
<wsdl:message name="logoutResponse">
</wsdl:message>
<wsdl:message name="logoutRequest">
<wsdl:part name="sessionId" type="xsd:string"/>
</wsdl:message>
<wsdl:message name="loginAndCreateSessionResponse">
<wsdl:part name="loginAndCreateSessionReturn" type="xsd:string"/>
</wsdl:message>
<wsdl:message name="loginAndCreateSessionRequest">
<wsdl:part name="name" type="xsd:string"/>
<wsdl:part name="password" type="xsd:string"/>
</wsdl:message>
<wsdl:portType name="SystemSupport">
<wsdl:operation name="logout" parameterOrder="sessionId">
<wsdl:input message="intf:logoutRequest" name="logoutRequest"/>
<wsdl:output message="intf:logoutResponse" name="logoutResponse"/>
<wsdl:fault message="intf:SystemSupportException" name="SystemSupportException"/>
</wsdl:operation>
<wsdl:operation name="loginAndCreateSession" parameterOrder="name password">
<wsdl:input message="intf:loginAndCreateSessionRequest" name="loginAndCreateSessionRequest"/>
<wsdl:output message="intf:loginAndCreateSessionResponse" name="loginAndCreateSessionResponse"/>
<wsdl:fault message="intf:SystemSupportException" name="SystemSupportException"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="SystemSupportSoapBinding" type="intf:SystemSupport">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="logout">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="logoutRequest">
<wsdlsoap:body namespace="http://core.rbac.csap2" use="literal"/>
</wsdl:input>
<wsdl:output name="logoutResponse">
<wsdlsoap:body namespace="http://core.rbac.csap2" use="literal"/>
</wsdl:output>
<wsdl:fault name="SystemSupportException">
<wsdlsoap:fault name="SystemSupportException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
<wsdl:operation name="loginAndCreateSession">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="loginAndCreateSessionRequest">
<wsdlsoap:body namespace="http://core.rbac.csap2" use="literal"/>
</wsdl:input>
<wsdl:output name="loginAndCreateSessionResponse">
<wsdlsoap:body namespace="http://core.rbac.csap2" use="literal"/>
</wsdl:output>
<wsdl:fault name="SystemSupportException">
<wsdlsoap:fault name="SystemSupportException" use="literal"/>
</wsdl:fault>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="SystemSupportService">
<wsdl:port binding="intf:SystemSupportSoapBinding" name="SystemSupport">
<wsdlsoap:address location="http://localhost:9080/CSAP2SysSupRouter/services/SystemSupport"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>I would be glad to get a response to this topic. I am really on my personal limits!
thanks and regards,
simonhi,
first of all your service user : SID_PIRWBUSR
has a wrong name it sould be PIRWBUSR
so check where did you define this SID_PIRWBUSR
Regards,
michal -
DB_RUNRECOVERY: Fatal error, run database recovery
I am getting this error when trying to add data to QUEUE. But after I restart my app, this error does not happen anymore.
2009-08-16 10:27:12.558990 [ERR] mod_cdr_bdb.c:370 Unable to add cdr to Queue. Error=DB_RUNRECOVERY: Fatal error, run database recovery
Does anyone know what could be the cause of the error?Hi,
Do you know the steps that lead up to this error? Can you reproduce it?
Were there any error messages sent to the error log file? Can you confirm that you have verbose error messages turned on by always initializing one of the error callback interfaces in your environment. This will provide verbose error messages:
DB_ENV->set_errcall, DB_ENV->set_errfile, DB_ENV->set_errpfx, and DB_ENV->set_verbose.
What flags are you using when opening the environment and the database?
The procedure you have to follow when you receive this error is described here: [DB_RUNRECOVERY|http://www.oracle.com/technology/documentation/berkeley-db/db/ref/program/errorret.html#DB_RUNRECOVERY]
DB_RUNRECOVERY:
There exists a class of errors that Berkeley DB considers fatal to an entire Berkeley DB environment. An example of this type of error is a corrupted database page. The only way to recover from these failures is to have all threads of control exit the Berkeley DB environment, run recovery of the environment, and re-enter Berkeley DB. (It is not strictly necessary that the processes exit, although that is the only way to recover system resources, such as file descriptors and memory, allocated by Berkeley DB.)
When this type of error is encountered, the error value DB_RUNRECOVERY is returned. This error can be returned by any Berkeley DB interface. Once DB_RUNRECOVERY is returned by any interface, it will be returned from all subsequent Berkeley DB calls made by any threads of control participating in the environment.
Applications can handle such fatal errors in one of two ways: first, by checking for DB_RUNRECOVERY as part of their normal Berkeley DB error return checking, similarly to DB_LOCK_DEADLOCK or any other error. Alternatively, applications can specify a fatal-error callback function using the DB_ENV->set_event_notify method. Applications with no cleanup processing of their own should simply exit from the callback function.Thanks,
Bogdan Coman -
Error running 9i reports from forms.
Hi folks,
i am having problems running 9i reports from a form.
i have installed Oracle 9iDS on a Win XP machine with 256 MB RAM and a Pentium 1.4Ghz processor.
i also have a local Oracle 9i database. i have created several reports that i am trying to run from some forms but all efforts to date have failed.
below is some sample code.
declare
v_rid report_object;
v_rjob varchar2(100);
v_rptstatus varchar2(100);
v_jobid varchar2(100);
BEGIN
/*get handle to report object itself*/
v_rid := find_report_object('pbranchlist');
set_report_object_property(v_rid,REPORT_EXECUTION_MODE,BATCH);
set_report_object_property(v_rid,REPORT_DESFORMAT,'htmlcss');
set_report_object_property(v_rid,REPORT_DESTYPE,'CACHE');
set_report_object_property(v_rid,REPORT_SERVER,'repsrv');
set_report_object_property(v_rid,REPORT_COMM_MODE,synchronous);
v_rjob := run_report_object(v_rid);
v_rptstatus := report_object_status(v_rjob);
while v_rptstatus in ('RUNNING','OPENING_REPORT','ENQUEUED') loop
v_rptstatus := report_object_status(v_rjob);
message(v_rptstatus);
end loop;
if v_rptstatus = 'FINISHED' then
/*display report in browser*/
-- web.show_document('http://steve:8888/reports/rwservlet/getjobid'||
-- substr(v_rptsvrjob,instr(v_rptsvrjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
web.show_document('/reports/rwservlet/getjobid'||substr(v_rjob,instr(v_rjob,'_',-1)+1)||'?'||'server=repsrv','_blank');
else
message('error running Report');
end if;
end;
pbranchlist is defined in the form,
repsrv is a report server i installed and explicitly started.
on clicking the button to run the above code, i get a message on the browser status bar as follows
opening http://steve:8888/reports/rwservlet/getjobid11?server=repsrv...
that's it. it stays like that forever and a progress bar showing the status of the operation gets to the halfway mark and stays there for up to 15 minutes.
I eventually halted the operation by clicking the stop button of the browser. The form then becomes totally non-responsive with the mouse indicator changing to the hour-glass shape and a small vertical bar moving rapidly back and forth at the bottom of the form window.
My only recourse then is to explicitly close the browser window.
I have already configured Reports to run in non single sign-on mode by setting SINGLESIGNON=NO in the rwservlet.properties file.
Is there anything i have not done properly?
Thanks in advance.Steve,
can you check the Reports cache directory if the Reports file got created? I would assume yes, but better check.
Frank -
hello,
we have 3 server sharepoint 2010 farm as a live system and a 1 server for development and test system. I've got a problem with one of our portals that gives correlation ID (in 2 or 3 times a week) on all my dataview web parts (total 8 Dataview
WP) until i make IIS reset for that portal. (but same portal works like magic on test system over 3 weeks now). there is no custom code in the page other than the customized masterpage and css. and just reseting the IIS solves the problem for a couple
of days but i need to fix that permanantly. if anyone can help me about that i will be happy. thank you all in advance.
here is the log for the correlation ID;
11/08/2011 09:40:11.72 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:http://www.efesithelpdesk.com:80/defaulttr.aspx) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:11.79 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (GetFileAndMetaInfo). Execution Time=63,946744628158 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:11.79 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (GetWebPartPageContent). Execution Time=64,2515319684485 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:11.79 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Logging Correlation Data xmnv Medium Site=/ 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:11.79 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=65.3603321092485 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.22 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=361.680395134018 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.25 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.25* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.25 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (DataBinding DataFormWebPart (HelpDesk)). Execution Time=391.723110060077 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.25 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (Activate web part connections). Execution Time=416.389513192319 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.28 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.28* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.30 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=18.8157992147047 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.34 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.34* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.34 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (DataBinding DataFormWebPart (Related Items in Approves)).
Execution Time=56.5768833748423 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.36 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=16.99475771362 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.41 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.41* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.41 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (DataBinding DataFormWebPart (Related Items in Tasks)).
Execution Time=59.0992011554541 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.43 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=20.8265994700444 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.44 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.44* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.46 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=18.1539832576487 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.47 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.47* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.49 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=13.4458429772499 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.49 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.49* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.52 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly High Leaving Monitored Scope (EnsureListItemsData). Execution Time=23.1282886512113 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.53 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High Error while executing web part: System.InvalidProgramException: Common Language
Runtime detected an invalid program. at Execute(XmlQueryRuntime ) at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer, Boolean
closeWriter) at System.Xml.Xsl.XmlILCommand.Execute(IXPathNavigable contextDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter results) at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable
input, XsltArgumentList arguments, XmlWriter results) at Microsoft.SharePoint.WebPartPages.DataFormWebPart.ExecuteTransform(XslCompiledTransform xslCompiledTransform, XsltArgumentList xmlArguments, Boolean bDeferExecuteTransform)
at Microsoft.SharePoint.WebPar... 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.53* w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Web Parts 89a1 High ...tPages.DataFormWebPart.PrepareAndPerformTransform(Boolean bDeferExecuteTransform) 841eadfa-2a71-4cd3-85a4-7b1e3d75355f
11/08/2011 09:40:12.57 w3wp.exe (0x1AF4) 0x0BB4 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://www.efesithelpdesk.com:80/defaulttr.aspx)). Execution
Time=845.499567682485 841eadfa-2a71-4cd3-85a4-7b1e3d75355fNicholas Mulder's summary is exactly the issue our server is facing. App pool recycle kicks-off at 2:04am and by 2:06am all our data view web parts are displaying "Unable to display web part ..." I get the same error messages in ULS logs every
time it recycles, however it is able to correct itself some of the time. The other times which is every few days, the web parts never come back up.
Here are a few lines from the log leading up to the recycle and a few after.
-The application domain /LM/W3SVC/1304874868/ROOT-1-130058022909222844 is unloading and going to be recycled.
-Shutdown Reason: HostingEnvironment initiated shutdown HostingEnvironment caused shutdown
-AppDomain shutdown initiated
-Flushing connection pool 'Data Source=SPSQL;Initial Catalog=SharePoint_Config;Integrated Security=True;Enlist=False;Connect Timeout=15'
-An application domain named /LM/W3SVC/1304874868/ROOT-1-130058174460198926 has just been loaded.
-Failed to look up string with key "FSAdmin_SiteSettings_UserContextManagement_ToolTip", keyfile Microsoft.Office.Server.Search.
-Error initializing Safe control - Assembly:Microsoft.Office.SharePoint.ClientExtensions, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c TypeName: Microsoft.Office.SharePoint.ClientExtensions.Publishing.TakeListOfflineRibbonControl Error:
-No webtemp*.xml files found for language 1033 and product version 3.
-No webtemp*.xml files found for language 1033 and product version 2.
-Failed to find generic XML file at "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\SiteTemplates\STS\xml\stdview.xml"
-Failed to find generic XML file at "C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\Template\SiteTemplates\STS\xml\stdview.xml"
-Error while executing web part: System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
-Error while executing web part: System.ArgumentException: An item with the same key has already been added.
-Error while executing web part: System.NullReferenceException: Object reference not set to an instance of an object.
-AddWithFile:DfwpXslFilesHashCache=Microsoft.SharePoint.WebPartPages.CloneableHashTable
-Error while executing web part: System.InvalidProgramException: Common Language Runtime detected an invalid program. -
Hello All,
I have a list with about 70 or so columns. When I try to access a NewForm for this list, I get an 'Unable to display this web part' error.
Looking at the Correlation always says it is a:
"Error while executing web part: System.StackOverflowException: Operation caused a stack overflow."
I have read many pages on the internet that it is due to an XsltTransformTimeOut value set to 1. I have applied the Feb 2012 CU and tried changing the value to 5, 10, 150, 250 and each time I reset IIS before I tried loading the form again. Each one has
failed and the correlation says the same thing (stack overflow).
I do not know what to do next because every page on the net says it is from that timeout value but I have followed the steps properly to change it but nothing has worked.
Thank you for your help!You may be exceeding the number of columns threshold with 70 or so columns in your list.
Take a look at the Column limits here:
http://technet.microsoft.com/en-us/library/cc262787.aspx#Column
Okay, so please help me to understand this. It says the maximum value for single line of text is 276 and the size per column is 28 bytes. How would I know if I have pushed the limit? I just multiplied 28 x the number of single line of text columns in that
list and the answer is 840. I do have many other columns, such as multiple lines of text and choice. I do not know if the theory above is correct though, because 28 does not go evenly into 276 (276/28 = 9.857)
Please help me understand how to calculate my fields to see if I have went beyond the limits.
Thank you! -
Getting error in sdp94 " data partly after horizon" any suggetionu2026
Hi gurus,
i have changed period in SBP and in SE38 planning area initialization in variants changed /SAPAPO/TS_PAREA_INITIALIZ ) , still getting error in sdp94 " data partly after horizon" any suggetionu2026
babuHi Babu,
Kindly check till when is the planning area initialized. Goto //msdp_admin, right click on the planning area---> Created time series objects. Check the date till when it is initialized. You can save the data only if it's in this period. In the planning book there may be dates after the planning horizon also in which case you can't save data.
Thanks and Regards,
Nithin. -
"Error running javac.exe compiler" when using ant to compile Eclipse plugin
Hi
I encounter an error "Error running C:\jdk1.5.0_06\bin\javac.exe compiler" when building my project using ant1.7.
My project has 10 eclipse plugins, and each plugin is compiled by invoking following ant target
<!-- ===================================================================
Compile specified plugin
target parameters:
param.plugin.dir: the plugin directory
param.plugin.targetJarFile: the name of jar file for the given plugin
param.plugin.src.dir: the folder name of source codes. Note: it is relative path name
param.fork: indicate if another process is forked to run javac
=================================================================== -->
<target name="compilePlugin">
<!-- Prepare compile environment -->
<!-- Delete obsolete build folder -->
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
<!-- Delete obsolete jar file -->
<delete file="${param.plugin.dir}/${param.plugin.targetJarFile}" quiet="true"/>
<mkdir dir="${param.plugin.dir}/${build.dir}"/>
<!-- Compile source codes -->
<javac srcdir="${param.plugin.dir}/${param.plugin.src.dir}"
destdir="${param.plugin.dir}/${build.dir}"
failonerror="${javacFailOnError}"
verbose="${javacVerbose}"
debug="${javacDebugInfo}"
deprecation="${javacDeprecation}"
optimize="${javacOptimize}"
source="${javacSource}"
target="${javacTarget}"
fork="${param.fork}" memoryInitialSize="256m" memoryMaximumSize="512m">
<classpath refid="compile.classpath" />
</javac>
<!-- Create plugin jar file -->
<copy todir="${param.plugin.dir}/${build.dir}" failonerror="true">
<fileset dir="${param.plugin.dir}/${param.plugin.src.dir}" excludes="**/*.java, **/package.htm*" />
</copy>
<jar jarfile="${param.plugin.dir}/${param.plugin.targetJarFile}" basedir="${param.plugin.dir}/${build.dir}"/>
<delete dir="${param.plugin.dir}/${build.dir}" quiet="true"/>
</target>
Since each of first 9 plugins contains less than 500 java source files, we always set "param.fork" to false when invoking this ant target.
For the 10th plugin, it has about 1000 source files. If we set "param.fork" to false, we will get the error "Error running javac.exe compiler". So we have to set "param.fork" to true when compiling it. This week, this plugin contains about 1250 files and we get the same error again when compiling it. I tried to increase the "memoryMaximumSize" to "768", but still couldn't get through it.
BTW, There are about 150 jar files in our classpath for compiling plugins. Do many jar files cause this problem?
Any help is highly appreciated.
Many thanks
OceanmanI encountered a very similar error and I was able to resolve it by removing the following parameters from the javac task:
fork="${param.fork}"
memoryInitialSize="256m"
memoryMaximumSize="512m"My values were not the same as yours, before I removed them, the values were set to:
fork="true"
memoryInitialSize="256m"
memoryMaximumSize="256m" Not sure why this fixed my problem but it did. I was using Ant 1.7 and Java 1.6_07 hope this helps. -
Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.
I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??
-
Hi,
When I was simulating the 'eMail Response - Process Message', I had been getting the below error when entering to 'Create activity Process' step.(provided all the inputs per testmode.xml file)
Error running sub-process 'eMail Response - Create Activity' at step 'Create Activity Process'.(SBL-BPR-00183)
I increased the log level to 5 and got the below message in log file
ObjMgrBusServiceLog InvokeMethod 4 0000000251b51f04:0 2013-06-10 01:30:12 Begin: Business Service 'XML Hierarchy Converter' invoke method: 'DocToHier' at 12cc4240
ObjMgrBusServiceLog Error 1 0000000251b51f04:0 2013-06-10 01:30:12 (xmlcnvsv.cpp (548)) SBL-EAI-00246: XML Hierarchy Converter error - empty input message, expecting an XML document in <Value> of input arguments
I was wondering I could not find 'XML Hierarchy Converter' business service in 'eMail Response - Process Message' and 'eMail Response - Create Activity' sub process.
Can any body help me out in this regard.
Thanks in advance..
JagadeeshHi Naresh,
yes, I am using the delete polling strategy. Here is the .jca file:
<adapter-config name="Pozadavky" adapter="Database Adapter" wsdlLocation="Pozadavky.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/PozadavkyConn" UIConnectionName="PozadavkyConn" adapterRef=""/>
<endpoint-activation portType="Pozadavky_ptt" operation="receive">
<activation-spec className="oracle.tip.adapter.db.DBActivationSpec">
<property name="DescriptorName" value="Pozadavky.Pozadavky"/>
<property name="QueryName" value="PozadavkySelect"/>
<property name="MappingsMetaDataURL" value="Pozadavky-or-mappings.xml"/>
<property name="PollingStrategy" value="DeletePollingStrategy"/>
<property name="PollingInterval" value="120"/>
<property name="MaxRaiseSize" value="1"/>
<property name="MaxTransactionSize" value="10"/>
<property name="NumberOfThreads" value="1"/>
<property name="ReturnSingleResultSet" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
Maybe you are looking for
-
External Lacie drive crashed, now I can't find a recent backup for LR3 catalog.
I have LR3 on a Mac running OS 10.6.8. My catalog, cache and images were stored on an external Lacie 1TB drive (partitioned so it can be used by a pc and mac). My catalog backup files were saved on another external drive MXTR as well as copies of a
-
Get All sql history in oracle 10g
How to get all select and insert statement from the beginning in the oracle? I tried, "select * from v$sqlarea;" but it's giving only today results, but i need all select and insert statement from the beginning where oracle installed or before partic
-
Different local currencies AED GBP
Dear Friends, When the user is trying to post the invoice, he is getting the error " Different local currencies AED GBP" In PO status it is displaying downpayments as 0.00 GBP and the po currency is usd. In Global Paramerters for company code the cur
-
Panic.. with substitution method
Hi all, I would like use substitution method to do a dynamic check, but I really don't know how to do that. This is my first serious approach with substitution method. What I want to do is the following: I would like to do an insert into a fixed tabl
-
Cannot see Windows computers in Network!!!
Hi, I love my iBook to bits but this problem is doing my head in! When I first got my iBook, I could see all the Windows computers in my workgroup(called WORKGROUP) in Network. I then noticed after a few weeks that I couldnt any longer! I can get rou