Error "The application could not execute the required function"

Hi All,
When I try to activate the DTP the following error occurs."the application could not execute the required function".
I was able to activate the DTP for the same DataSource 2 days back but now I am unable to activate .
Kindly suggest what could be the possible reason for the same.
Regards,
Santosh Mani

If you have transformation, check it is active. Is the object 0plant is acitve or not?
Ravi Thotahdri

Similar Messages

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

    Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
    working fine and no changes were made to the workflow.
    I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
    to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
    are), but we still cannot figure out why the workflow is still throwing this error.
    We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
    The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type. 
    The form associated with the list was modified in InfoPath 2010. 
    Approvers would provide their approval in the InfoPath form which is then read by the workflow.
    Side note - items created after the workflow throws this Unknown Error some seem to be working fine. 
    We have deleted the item in question and re-added it with no effect. 
    Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
    Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
    Cheers

    Hi,
    I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
    If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
    Thanks,
    Entan Ming
    Entan Ming
    TechNet Community Support

  • The process could not execute 'sp_repldone/sp_replcounters' error for Log Reader Agent and SQL Server Assertion 17066 & 3624 errors in SQL Logs

    One of our SQL Server started creating SQLDUMP file and and on investigation I found the error longs are filled with Errors 3624 & 17066. There is transnational replication configured on one of the databases is the LogReader Agent is failing error "The
    process could not execute 'sp_repldone/sp_replcounters' on XXXXX". 
    Not sure if both these Assertion & Logreader Agent errors are related. Before I remove and put the replication, I wanted to check if anyone has experienced the same issues or aware of what the cause. 
    ***********Error messages from SQL Logs******
    **Dump thread - spid = 0, EC = 0x0000000111534460
    Message
    A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
    Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
    Error: 3624, Severity: 20, State: 1.
    SQL Server Assertion: File: <logscan.cpp>, line=2123 Failed Assertion = 'UtilDbccIsInsideDbcc () || (m_ProxyLogMgr->GetPru ()->GetStartupState () < RecoveryUnit::Recovered)'. This error may be timing-related. If the error persists after rerunning
    the statement, use DBCC CHECKDB to check the database for structural integrity, or restart the server to ensure in-memory data structures are not corrupted.
    Error: 17066, Severity: 16, State: 1.
    External dump process return code 0x20000001.
    External dump process returned no errors.
    Thank you in advance.

    You need to determine if this error is a transient one or a show stopper one.
    It sounds like your log reader agent has crashed and can't continue.
    If so your best bet is to call Microsoft CSS and open a support incident.
    It also sounds like DBCC CHECKDB was running while the log reader agent crashed.
    If you need to get up and running again run sp_replrestart, but then you might find that replicated commands are not picked up. You will need to run a validation to determine if you need to reinitialize the entire publication or a single article.
    I have run into errors like this, but they tend to be transient, ie the log reader agent crashes, and on restart it works fine.
    looking for a book on SQL Server 2008 Administration?
    http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
    http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

  • When i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

    when i try downloading adobe pro i am getting an error message that is saying: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author.

    Hi Kashmore,
    Seems like the downloaded file was corrupt that could be because of either network restriction or the anti virus might have blocked it. My suggestion would be to try and download the product either by turning off the Antivirus or try a different network.
    Cheers,
    Kartikay Sharma

  • "Sorry, an error has occured. The application could not be installed because the AIR file is damaged

    Hello-
    I have an air application that is distributed via CDROM, the app is signed by a code signing certificate and timestamped. In mid-August when my certicate expired my users started calling stating that they couldn't install our product due to the following error: "Sorry, an error has occured. The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author." From my understanding a timestamped application is taken at a point in time when it's generated so why would it matter if the certificate was still valid? I have since replaced the certificate and will need to redistribute to my (thousands of) users however when I test it out using a future date and time the same error occurs. Any information to help resolve this would be grately appreciated.

    my command:
    C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adl
    application.xml
    C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
    -certificate -cn HelloW
    orld 1024-RSA certHelloWorld.pfx password
    C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>adt
    -package -storetype pkc
    s12 -keystore certHelloWorld.pfx HelloWorld.air
    application.xml HelloWorld.html
    password: password
    C:\Users\HOME USE\Desktop\AIR Development\HelloWorld>
    And here is another link to download my code
    http://www.megaupload.com/?d=JS3X2IVC
    Thank you.

  • The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

       I got error  "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I  found out the cause is  Update Item action       
    I need to update item in another List call Customer Report ,the field call "Issues"  with data type  "Choice"   to yes
    then the error arise .   please help..

    Thanks for the quick response Nikhil.
    Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
    Site Lists
    Engagements = 4456 (Errors on this list, primary list for activity)
    Tasks = 7711  (All workflow tasks from all site lists)
    Clients = 4396  (Lookup from Engagements, Tslips, etc)
    Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
    Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
    A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
    Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

  • Bursting Control file, Error!! Could not deliver the output for Delivery

    Hi,
    I am using bursting control file to send report output to email in R12.1.3.
    If the report output is having data, it is working fine. if there is no data it is getting errored out with the below message.
    "Error!! Could not deliver the output for Delivery channel:null "
    In the report output i put "No data found", when i click on view output the output in application is showing as "NO DATA FOUND" in PDF .
    "Bursting VMC Approved Purchase Orders for a period (XML Publisher Report Bursting Program)" got above error.
    my requirement is if there is no data, still i require the output to email.
    Thanks in Advance
    Adina.

    Hi,
    I am facing the same situation and want the bursting program to finish in normal even when there is no data.
    Can you please let me know how you resolved this?
    Thanks
    RG

  • A nested exception occurred. Could not execute the function

    Hi Experts,
    Post upgrade of SAP Portal from 7.0 to 7.31, and when we click any application related to visual composer it shows the below error.
    and the default trace shows
    #2.0 #2014 07 22 02:34:11:243#0-700#Error#visualComposer_NWBIKit_logger#
    #EP-PIN-PRT#tc~epbc~prtc~core#C000A7EEAF63014200000002000019B9#11738650000000004#sap.com/com.sap.visualcomposer.BIKit#visualComposer_NWBIKit_logger#C921154#36##E220BC96117411E4C8F2000000B31E1A#519cf5b0118311e48b43000000b31e1a#519cf5b0118311e48b43000000b31e1a#0#Thread[HTTP Worker [@2079636611],5,Dedicated_Application_Thread]#Plain##
    A nested exception occurredCould not execute the function
    [EXCEPTION]
    com.sapportals.connector.execution.ExecutionException: A nested exception occurred. Could not execute the function.
    at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewExecutionLocalizedException(SAPConnectorException.java:193)
    at com.sapportals.connectors.SAPCFConnector.execution.functions.SAPCFConnectorInteraction.execute(SAPCFConnectorInteraction.java:617)
    at com.sap.portal.guimachine.bikit.query.bw.QueryViewFlatRfc.execute(QueryViewFlatRfc.java:209)
    at com.sap.portal.guimachine.bikit.designtime.bw.BWResultsetProcessor$ExecuteHandler.execute(BWResultsetProcessor.java:399)
    Please give us your valuable inputs to solve this.
    Thanks in advace!!
    Regards,
    Preetha Balan

    Hi Colin,
    Sorry for the delay in response!!
    Yes SAP gave patch VC70RUNTIME file to apply to get rid of this error.
    Even asked us to follow the sap note
    1532050 - Disabling error messages that pop up at runtime
    Hope this helps you
    Thanks,
    Preetha Balan

  • Crystal Report Runtime Error 9.0.Could not open the report

    Hi,
    Getting the Crystal Report Runtime Error 9.0.Could not open the report while Run on Launch Application. Actually in Launch Application, created a link for exe which is having crystal reports. We can open the Crystal Reports from the exe outside B1.
    Note: SAP 2007, Crystal Report 2008 is using.Normally can open crystal report.
    Any help to fix the error is appreciated.
    Thanks & Regards,
    Parvatha Solai.N

    Hi,
    Please post screen shot of error message here.
    Thanks & Regards,
    Nagarajan

  • Adobe Air I get this message: The application could not be installed because the installer file is damaged....

    Every time I try to install new product through adobe air I get this message: The application could not be installed because the installer file is damaged. Try obtaining a new installer file from the application author. Kiran Kumar: May I have the product name and version you are referring to? I've looked over the online suggested repair which indicates to search for and delete Adobe Muse but when go looking for it, it doesn't seem to exist. How can I get this resolved?

    Finally found a fix on my own....Wasted like 3 hours today. Hope this helps for anyone struggling with that stupid error message:

  • Error!! Could not deliver the output for Delivery channel:null

    Hi Friends,
    XML/BI publisher : 5.6.3
    Oracle Applications : R12.0.6
    Bursting program Log file
    ==================
    XML/BI Publisher Version : 5.6.3
    Request ID: 993023
    All Parameters: Dummy for Data Security=N:ReportRequestID=993022:DebugFlag=Y
    Report Req ID: 993022
    Debug Flag: Y
    Updating request description
    Updated description
    Retrieving XML request information
    Node Name:XXXXXGRP02
    Preparing parameters
    null output =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993023.out
    inputfilename =/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
    Data XML File:/devrpi/applcsf/out/DEVRPI_auohscgrp02/o993022.out
    Set Bursting parameters..
    Temp. Directory:/tmp
    [041210_040045855][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.130 - Production
    [041210_040045859][][STATEMENT] setOAProperties called..
    Bursting propertes.....
    {user-variable:cp:territory=US, user-variable:cp:ReportRequestID=993022, user-variable:cp:language=en, user-variable:cp:responsibility=50537, user-variable.OA_MEDIA=https://appscgrpdev.oracleoutsourcing.com:443/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=993022, user-variable:cp:locale=en-US, user-variable:cp:user=Dev2, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=993023, user-variable:cp:org_id=90, user-variable:cp:reportdescription=Test_xml_bursting, user-variable:cp:Dummy for Data Security=N}
    Start bursting process..
    Bursting process complete..
    Generating Bursting Status Report..
    Bursting program Out put file
    ==================
    Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details.

    Hello Sir,
    I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
    Thanks
    <?xml version="1.0" encoding="UTF-8"?>
    <xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
         <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
              <xapi:delivery>
                   <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                        <xapi:message id="123" to="[email protected]" cc="[email protected]"
                             attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                        </xapi:message>
                   </xapi:email>
    </xapi:delivery>
    <xapi:document output-type="pdf" delivery="123">
         <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
         </xapi:template>
    </xapi:document>
    </xapi:request>
    </xapi:requestset>
    Edited by: user9367932 on Apr 13, 2010 4:59 AM
    Edited by: user9367932 on Apr 13, 2010 4:59 AM

  • Could not execute the job

    Hi,
    when i execute the job a a window appear with the massage" ERROR: could not execute the job .Error returned was 1
         MESSAGE is : Could not open command file...
    And i can't find from where it comes any suggestion?

    When today i execute the job i had this list of error
    13860    15384    REP-100109        27/05/2014 08:22:10       |Session TF_SGFA
    13860    15384    REP-100109        27/05/2014 08:22:10       Cannot save <History info> into the repository. Additional database information: <SQL submitted to ODBC data source
    13860    15384    REP-100109        27/05/2014 08:22:10       <SIGSIRDDB01\SQLSIRDBD> resulted in error <[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object
    13860    15384    REP-100109        27/05/2014 08:22:10       'dbo.AL_HISTORY_INFO' in database 'DS_REP' because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded
    13860    15384    REP-100109        27/05/2014 08:22:10       files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for existing files
    13860    15384    REP-100109        27/05/2014 08:22:10       in the filegroup.>. The SQL submitted is <INSERT INTO "AL_HISTORY_INFO" ("OBJECT_KEY", "NAME", "VALUE", "NORM_NAME",
    13860    15384    REP-100109        27/05/2014 08:22:10       "NORM_VALUE") VALUES (430, N'TRACE_LOG_INFO',
    13860    15384    REP-100109        27/05/2014 08:22:10                N'F:\SAPDS/log/JobServDS/sigsirddb01_sqlsirdbd_ds_rep_dsuser/trace_05_27_2014_08_22_09_10__3a4327b0_92c8_4abe_ac24_96d49123242a.
    13860    15384    REP-100109        27/05/2014 08:22:10       txt', N'TRACE_LOG_INFO',
    13860    15384    REP-100109        27/05/2014 08:22:10                N'F:\SAPDS/LOG/JOBSERVDS/SIGSIRDDB01_SQLSIRDBD_DS_REP_DSUSER/TRACE_05_27_2014_08_22_09_10__3A4327B0_92C8_4ABE_AC24_96D49123242A.
    13860    15384    REP-100109        27/05/2014 08:22:10       TXT') >.>.
    13860    15384    REP-100112        27/05/2014 08:22:10       |Session TF_SGFA
    13860    15384    REP-100112        27/05/2014 08:22:10       Cannot save <History info> for repository object <>. Additional database information: <Cannot save <History info> into the
    13860    15384    REP-100112        27/05/2014 08:22:10       repository. Additional database information: <SQL submitted to ODBC data source <SIGSIRDDB01\SQLSIRDBD> resulted in error
    13860    15384    REP-100112        27/05/2014 08:22:10       <[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'dbo.AL_HISTORY_INFO' in database 'DS_REP'
    13860    15384    REP-100112        27/05/2014 08:22:10       because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup,
    13860    15384    REP-100112        27/05/2014 08:22:10       adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.>. The SQL submitted is
    13860    15384    REP-100112        27/05/2014 08:22:10       <INSERT INTO "AL_HISTORY_INFO" ("OBJECT_KEY", "NAME", "VALUE", "NORM_NAME", "NORM_VALUE") VALUES (430, N'TRACE_LOG_INFO',
    13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/log/JobServDS/sigsirddb01_sqlsirdbd_ds_rep_dsuser/trace_05_27_2014_08_22_09_10__3a4327b0_92c8_4abe_ac24_96d49123242a.
    13860    15384    REP-100112        27/05/2014 08:22:10       txt', N'TRACE_LOG_INFO',
    13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/LOG/JOBSERVDS/SIGSIRDDB01_SQLSIRDBD_DS_REP_DSUSER/TRACE_05_27_2014_08_22_09_10__3A4327B0_92C8_4ABE_AC24_96D49123242A.
    13860    15384    REP-100112        27/05/2014 08:22:10       TXT') >.>.>.
    13860    15384    REP-100112        27/05/2014 08:22:10       |Session TF_SGFA
    13860    15384    REP-100112        27/05/2014 08:22:10       Cannot save <History info> for repository object <>. Additional database information: <Cannot save <History info> into the
    13860    15384    REP-100112        27/05/2014 08:22:10       repository. Additional database information: <SQL submitted to ODBC data source <SIGSIRDDB01\SQLSIRDBD> resulted in error
    13860    15384    REP-100112        27/05/2014 08:22:10       <[Microsoft][ODBC SQL Server Driver][SQL Server]Could not allocate space for object 'dbo.AL_HISTORY_INFO' in database 'DS_REP'
    13860    15384    REP-100112        27/05/2014 08:22:10       because the 'PRIMARY' filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup,
    13860    15384    REP-100112        27/05/2014 08:22:10       adding additional files to the filegroup, or setting autogrowth on for existing files in the filegroup.>. The SQL submitted is
    13860    15384    REP-100112        27/05/2014 08:22:10       <INSERT INTO "AL_HISTORY_INFO" ("OBJECT_KEY", "NAME", "VALUE", "NORM_NAME", "NORM_VALUE") VALUES (430, N'TRACE_LOG_INFO',
    13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/log/JobServDS/sigsirddb01_sqlsirdbd_ds_rep_dsuser/trace_05_27_2014_08_22_09_10__3a4327b0_92c8_4abe_ac24_96d49123242a.
    13860    15384    REP-100112        27/05/2014 08:22:10       txt', N'TRACE_LOG_INFO',
    13860    15384    REP-100112        27/05/2014 08:22:10                N'F:\SAPDS/LOG/JOBSERVDS/SIGSIRDDB01_SQLSIRDBD_DS_REP_DSUSER/TRACE_05_27_2014_08_22_09_10__3A4327B0_92C8_4ABE_AC24_96D49123242A.
    13860    15384    REP-100112        27/05/2014 08:22:10       TXT') >.>.>.
    and thank u.
    Sincerly

  • The application could not be installed...question

    Hello !
    I keep getting this error:
    The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.
    I have tried deleting everything and starting over and I have tried it in a different location but still nothing is working.  any help I would appreciate so much.
    Thank you !

    Could you provide more details about the application you're trying to install, and some details about your compuer/OS.

  • Air 1.51 installation failure. The application could not be installed because the AIR file is damaged

    The error:
    The application could not be installed because the AIR file is damaged. Try obtaining a new AIR file from the application author.
    is generated when an AIR installation file is lauched from a Samba Network Drive in Vista Utlimate 64. If the install files are copied to a local drive, it installs without incident.

    Working with networks drives are never reliable.  Corruption, path problems, networks connections, and privlatges can come in the way of a properly mapped drive.  I think your solution is fairly straight forward.  You need to install your application from a local filesystem, not a mapped network drive.  In the meantime, log a bug report HERE.

  • I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can't continue: unexpected failure during app

    I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can’t continue: unexpected failure during application startup  I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

    I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
    I'm baffled....
    Ben

Maybe you are looking for