Error: The Operating system Windows Vista Version 6.1 is not supported

While installing Oracle Database 'win64_11gR1_database_11070' on Windows Server 2008 R2,x64, I get this error during Product specific pre-requisite checks:
"The Operating system Windows Vista Version 6.1 is not supported. Install the recommended service pack"
Edited by: aa100 on 16-Jun-2010 09:04

What's not clear with this message? Windows 2008 R2 requires 11gR2:
http://www.oracle.com/technology/software/products/database/oracle11g/112010_win64soft.html
Werner

Similar Messages

  • Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configurat​ion, do any of the later versions support it?

    Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? 
    If version 6.5 does not support this configuration, do any of the later versions support it?
    I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI.  We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
    Thanks

    Hi,
    I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
    Why don't you just call your next/regional NI sales rep?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the correspondi

    have a question to ask ... I bought, at the time, the update of Adobe Audition CS6, being already in possession of the CS5.5 version. Since I had to redo the operating system (windows 7 professional 64-bit), reistallando program CS6, with the corresponding serial number in my possession, I noticed a malfunction that is:
    importing a musical motif and starting the program, clicking on play, I do not play any pattern or song despite being in operation.
    I reinstalled the program, but without any result. What do I do? Thanks.

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

    Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
    Mozilla Crash Reporter
    == Crash ID(s) ==
    20100611143157
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

    the 20100611143157 is an update which won't instal automatically on my notebook

  • Error -2147024714 : Automation Error the operating system cannot run %1'

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

    Post Author: greg.thompson
    CA Forum: General
    After installing Crystal Reports 10 Pro, I am receiving the following Business Objects error "Error -2147024714 : Automation Error the operating system cannot run %1" While trying to run reports within Business Objects 6.5 SP 2 HF 932, The desktop O/S XP Pro w/sp 2. Tried uninstalling both, reinstalling  twice did not solve the problem. I switched the install order the second time, also used all default install locations, any ideas here.

  • I want to backup several hundreds of emails to an external hard disk. The mail program is Apple Mail version 7.1. The Operating System is OSX Version 10.9.1 Mavericks. Can anybody advise me either where I might find instructions to undertake the backup or

    I want to backup several hundreds of emails to an external hard disk. The mail program is Apple Mail version 7.1. The Operating System is OSX Version 10.9.1 Mavericks. Can anybody advise me either where I might find instructions to undertake the backup or send me the instructions

    right-click or control-click on the mailbox account you want to back up in Mail, in the box on the left under MAILBOXES.
    select Export Mailbox...
    pick a destination for the backup folder

  • Error loading operating system- windows xp/windows me

    Hi,
    So, I have a Hp Pavillion 9715 desktop with windows xp professional and basically yesterday I turned on my computer and all it would do would go to the black screen saying "error loading operating system"
    Now I'm not really sure what tp do I was going to reinstall window xp, but i dont how to do this as i don't have the cd and the computer wont even power up in safe mode. I then realised that my computer's operating system is windows millenium edition, which i havs the recovery cd for. i could use this, but id lose all my data. i was wondering if there was a way to save or transfer all my files to a different hard drive. Or if there was a way to use the recovery cd to repair everything without me losing all my personal files, or would this not work because it would be windows me that is reinstalled and not xp?
    If anyone at all could help me id be so grateful, its quite annoying/upsetting. Thanks

    Welcome to the HP Forum!
    nickiblahblah wrote:
    Hi,
    So, I have a Hp Pavillion 9715 desktop with windows xp professional and basically yesterday I turned on my computer and all it would do would go to the black screen saying "error loading operating system"
    Now I'm not really sure what tp do I was going to reinstall window xp, but i dont how to do this as i don't have the cd and the computer wont even power up in safe mode. I then realised that my computer's operating system is windows millenium edition, which i havs the recovery cd for. i could use this, but id lose all my data. i was wondering if there was a way to save or transfer all my files to a different hard drive. Or if there was a way to use the recovery cd to repair everything without me losing all my personal files, or would this not work because it would be windows me that is reinstalled and not xp?
    If anyone at all could help me id be so grateful, its quite annoying/upsetting. Thanks
    Wow! Your PC is almost as old as my  (1996) Compaq 14XL244 Notebook.
    It still works, but required hard disk replacement about six years ago.  I suspect you will have a very hard time getting any files from your IDE hard disk. You can try putting the hard disk in an external enclosure and connecting it via USB to another PC. 
    The error message that you are seeing means that the BIOS can no longer recognize the hard dive.
    It is probably time to consider updating to a more recent PC. You certainly got plenty of good service life from it.
    Kind regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • BDD 2007 -- ZTI -- OSD error "The Operating System Installation Failed Unspecified Error (80004005)

    Hi there
    Wonder if anyone can advise me on a BDD 2007 OS deployment issue? (Apologies if this is in the wrong forum, I couldn't see a forum for BDD 2007.)
    First of all, this BDD 2007 server and the OSD config was not done by me. For info, it is part of a SMS 2003 infrastructure.
    I am trying to get the XP Pro build process working. I am led to believe the config has been completed.
    Unfortunately, after booting the pc from the nic, I get an error. This is the order:
    - the 'Initializing Windows PE' splash appears for perhaps 15 seconds
    - very briefly, the text changes to 'Initializing Network'
    - for a second or two only 'Initializing Windows PE' appears again
    - then this error message appears:
    "SMS Operating System Deployment - The Operating System Installation failed. Please contact your system administrator for assistance. Unspecified Error (80004005)"
    I've spent some time looking into this error (80004005) and from what I can gather it possibly means 'access denied'.
    I'm assuming after Windows PE loads the first Task Sequence begins, and if this possibly is where the issue lies?
    One thing I cannot understand - the first Task Sequence (Initialization) has this command line (as do most, with different .wsf file):
    cscript.exe "%SCRIPTROOT%\ZTIGather.wsf" /localonly
    However, I cannot access %SCRIPTROOT% at all, Windows says it can't find it. I can run other variables such as %USERPROFILE%, %SYSTEMROOT%, etc, but cannot open %SCRIPTROOT%.
    Is it simply the case that I should create a new system variable (that has not been created by whoever built the server)?
    Thanks
    John Henry

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Error loading operating system (windows 7)

    Macbook pro 8,2 (early 2011)
    Samsung SSD 850 evo primary drive
    OWC electra 3G secondary drive in place of the original DVD drive (with disk doubler).
    My original HDD was removed for the two SSD configuration.
    It contains two partition (OS X and Win 7 pro) and everything works fine.
    I use Winclone to clone Win 7 partition to the new OWC drive.
    My OS X partition was placed on the primary Samsung drive.
    OS X works fine.
    Win 7 works fine when i use Parallels Desktop (virtualization).
    But when i try to boot with Win 7, i have the " error loading operating system" black screen.
    I cannot repair Win 7 with the installation disc because when i try to boot with the DVD, i have à black screen with a white cursor and nothing happend. (original DVD drive is used in usb, inside a dedicated external cradle).
    Here are some of terminal commands :
    Last login: Sat Feb 14 17:26:06 on console
    MacBook-Pro-de-Guillaume:~ Home$ diskutil list
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:                  Apple_HFS Mac                     499.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *120.0 GB   disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:       Microsoft Basic Data Windows 7               119.8 GB   disk1s2
    MacBook-Pro-de-Guillaume:~ Home$ sudo gpt -vv -r show /dev/disk1
    Password:
    gpt show: /dev/disk1: mediasize=120034123776; sectorsize=512; blocks=234441648
    gpt show: /dev/disk1: PMBR at sector 0
    gpt show: /dev/disk1: Pri GPT at sector 1
    gpt show: /dev/disk1: Sec GPT at sector 234441647
          start       size  index  contents
              0          1         PMBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640       2008        
         411648  234029056      2  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      234440704        911        
      234441615         32         Sec GPT table
      234441647          1         Sec GPT header
    MacBook-Pro-de-Guillaume:~ Home$ sudo fdisk /dev/disk1
    Disk: /dev/disk1 geometry: 14593/255/63 [234441648 sectors]
    Signature: 0xAA55
             Starting       Ending
    #: id  cyl  hd sec -  cyl  hd sec [     start -       size]
    1: EE 1023 254  63 - 1023 254  63 [         1 -  234441647] <Unknown ID>
    2: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    4: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
    MacBook-Pro-de-Guillaume:~ Home$ sudo gpt -vv -r show /dev/disk1
    gpt show: /dev/disk1: mediasize=120034123776; sectorsize=512; blocks=234441648
    gpt show: /dev/disk1: PMBR at sector 0
    gpt show: /dev/disk1: Pri GPT at sector 1
    gpt show: /dev/disk1: Sec GPT at sector 234441647
          start       size  index  contents
              0          1         PMBR
              1          1         Pri GPT header
              2         32         Pri GPT table
             34          6        
             40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
         409640       2008        
         411648  234029056      2  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
      234440704        911        
      234441615         32         Sec GPT table
      234441647          1         Sec GPT header
    MacBook-Pro-de-Guillaume:~ Home$
    Thank you for your help !

    You are creating a new protective MBR, not a Hybrid MBR. A protective MBR encapsulates the disk into a single entry the size of the disk so legacy partitioning tools leave it untouched to 'protect' the GPT.
    In your case, since disk1 has only two partitions, GPT1 and GPT2, you should have two entries.
    Here is an example, where GPT3, 4 and 5 are hybridized.
    Rebuild MBR to match the new GPT information thus resetting the Hybrid MBR.
    Use defaults for other questions (for example Enter an MBR hex code (default AF): AF).
    Sudo gdisk /dev/disk0
    P  (Print list of parts)
    R   (Recover)
    H (chooses Hybrid)
    Partitions numbers to be hybridized: 3 4 5
    Y (Good for GRUB question)
    N (part 3 boot flag)
    N (part 4 boot flag)
    Y  (part 5 boot flag make NTFS bootable partition)
    P  (Print list of parts again)
    W  (Write the new MBR)
    Y    (Yes! write the new MBR)
    Reboot
    Please ensure that the following questions get appropriate defaults or correct values for the MBR hex codes as suggested by Gdisk. These are examples using a standard, your partition numbers will have a differential of 1. Given the prior Gdisk steps, your mapping will look as follows
    GPT1+2 (EFI+OSX) = MBR1 (You lose read visibility to OSX from Windows).
    GPT3 = MBR2 (Recovery HD).
    GPT4 (Shareddisk) = MBR3 (Shareddisk)
    GPT5 (Bootcamp) = MBR4 (Bootcamp - This should be made bootable).
    You can create variants of which partitions get mapped to which MBR). If you use 2 4 5, then Recovery will look like Free Disk space to Windows and can be corrupted. If you use 4 5, then EFI+OSX+Recovery HD will end up in MBR1. Try and see which works the best for you. In this configuration, I would also recommend not using any third-party NTFS tools.
    The following is an example for 2 3 4
    Creating entry for GPT partition #2 (MBR partition #2)
    Enter an MBR hex code (default AF): AF
    Set the bootable flag? (Y/N): n
    Creating entry for GPT partition #3 (MBR partition #3)
    Enter an MBR hex code (default AB): AB
    Set the bootable flag? (Y/N): n
    Creating entry for GPT partition #4 (MBR partition #4)
    Enter an MBR hex code (default 07): 07
    Set the bootable flag? (Y/N): y
    In your case the steps will become...
    Sudo gdisk /dev/disk0
    P  (Print list of parts)
    R   (Recover)
    H (chooses Hybrid)
    Partitions numbers to be hybridized: 2
    Y (Good for GRUB question)
    Y  (part 2 boot flag make NTFS bootable partition)
    P  (Print list of parts again)
    W  (Write the new MBR)
    Y    (Yes! write the new MBR)
    Reboot
    After the reboot, check the output of sudo fdisk /dev/disk0.

  • My HP Photosmart 385 printer won't work with my operating system - Windows Vista Ultimate. Why not?

    Is there a driver that I can dowload so my HP Photosmart 385 printer will work with my Windows Vista Ultimate operating system?

    Hey Alyssa426,
    Welcome to the HP Forums!
    Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
    Please let me know the outcome of installing the software.
    Thank you.
    I worked on behalf of HP

  • Operating System - Windows Vista

    I went to sign up for the free trial of Lightroom but I received the message that adobe is no longer supported by my operating system. My computer currently has Window's Vista, which I am guessing is my operating system. Is there anyway to get lightroom on my computer or would I really have to upgrade my operating system first?
    Thank you for all of your help.

    If this concerns the new release of Lightroom (CC 2015) Vista does not meet the system requirements. You would have to upgrade the system.  Here is a link to the Lightroom system requirements...
    System requirements

  • How do I get into my desktop computer after i forgot the password the operating system is Vista

    I forgot my password please help it is a vista operating system

    Hi,
    Here's another method to try.
    Download the application on the following link and save it to your Desktop.
    PC LoginNow
    Next, download and install  ImgBurn.
    Now, download and install 7-Zip.  When installed, right click the PC LoginNow download, select 7-Zip, select Extract Files and click OK.  Open the newly extracted folder and use ImgBurn to correctly burn the ISO file to a CD.  A guide on how to use this is on the link below.
    PC LoginNow Guide
    Insert the CD into your PC you can't log in to and restart to boot from the disc.
    Hopefully this should simply remove your password altogether, so you can then just setup a new one.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How do I install the operating system Windows 7 on a new hard drive?

    Good morning ¿ how I can install windows 7 home premium on a new hard drive?, Disk damage has my laptop windows 7 home premium 32 bit and I have to buy a new hard drive, but not as I have already installed the new because I do not have installation CD because it is laptop, thanks. My laptop is a satellite L455-S5975 .
    For I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
    My English is not very good, excuse me if I do not understand.

    Satellite L455-S5975 
    I CAN NOT get the recovery disks, and I'm not in USA. There will be a way to get it via download?
    There is no opportunity to download it, Richo. Your best bet is to have an acquaintance in the USA, Latin America, or Canada order the recovery discs and ship them to you.
    -Jerry

  • Operating system windows vista 32 bit can't install elements 11 or elements premier

    In jan I purchased elements 11 and it installed just fine and I waas very happy with the software. In July I discovered the video editor elements premier after installing this software I had no elements 11 or the elements premeier and have not been able to install either software and currently without either program every time I run an install I get the shared technologies error and it rolls back the install I have used the ASA analyizer and it says I am trying to install CS5 and I have a restart problem. Now what do I do? Jerry Swatman [email protected]

    Hi,
    Could you please try this step and let me know if it helps.
    Remane the OOBE folder to OOBE.old from this Location.
    C:\Program Files\Common Files\Adobe
    Once done please try again to install the software.
    Regards,
    Abhijit

  • Operating System Window XP Professional. I can not open Firefox. I have reset it and it worked for a few days. Now I can not execute it. Appreciate help.

    Can not execute Firefox. So I updated it and reinstalled it. Then I reset it. For a couple days it worked fine. Now I am back to square one. Can not open firefox again.

    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
    #Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
    '''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
    After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
    * '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
    * '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
    #Go to the Windows Start menu and click on "Computer".
    #In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
    #Find the "Program Files (x86)" folder or "Program Files" folder.
    #* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
    #* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
    #Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
    Now, go ahead and reinstall Firefox:
    #Double-click the downloaded installation file and go through the steps of the installation wizard.
    #Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!

Maybe you are looking for