Error the port of the service registry

Dear everyone,
please help me, i got the error message as below:
Information for this WSDL portType has not been obtained successfully. Some errors have occured.
(E.g. some of the parent entities might be corrupted or unpublished.)
Error message:
WSDLException: faultCode=INVALID_WSDL: java.io.IOException: Connection to localhost:7201 refused
Actually, my registry is run on port: 7301: http://localhost:7301/registry/uddi/web
but I don't know why when I log to oracle enterprise manager, registry control and click on find_tmodel, then click to obtain the list of service in this tmodel; i get the error message above.
Can anyone tell me how can I change the port value?
Many thanks in advance,
sophea

Now it is ok, i can use registry console to change the port.
registry console -> manage ->registry management - > replace url

Similar Messages

  • Importing the ES Bundle webservices into the Service Registry of PI

    Experts,
    We have an ECC 6.0 Enhancement Pack 3, PI 7.1, and CE 7.1 landscape and are having some trouble getting the Enterprise Web Services that come with EP3 to show up in the Service Registry that came with PI.
    We are following the guide "CE, ESR, AND DISCOVERY SYSTEM BUILDING AN END-TO-END ENTERPRISE SOA SCENARIO", https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/108ef7ba-8abd-2a10-f787-d5f29c5f1b88
    All of the references to CE we have been replacing with PI since we want to use the SR that came with PI instead of CE.
    We can get all the way up to step 6 in section 3.3 where it tells us to use LPCONFIG to create a logical port pointing to the Service Registry. We we run this tcode we get a message telling us to go to SOAMANAGER.  I found the following URL
    http://help.sap.com/saphelp_nwpi71/helpdata/en/44/cc8fd368c873dfe10000000a11466f/frameset.htm
    That describes how to do this however when we go into the NWA we do not see a 'Call Parameters' tab.
    Basically it looks like the process is as follows:
    1) On ECC 6.0, use Sm59 to create a RFC connection.
    2) On ECC 6.0, use WSPARAM to create a Enterprise Registry parameter
    3) From PI, launch SOAMANAGER to create a logical port
    4) ON ECC 6.0, use WSPUBLISH to select the webservices we want to show up in the Service Registry.
    Does this sound like the correct method?

    I should add, this is the error message that we are getting:
    SoapFaultCode:1  Cannot create implementation instance. Nested message:
    An exception occurred while obtaining UDDI Logical Ports. Please, check
    your c onfiguration settings (UDDI Endpoint or UDDI wsdl
    file)[_DestinationService Impl7000] Application or service
    service:tcesiesp~srv tried to access des tination UDDI_DESTINATION of
    type WSDestinationTemplate which does not curr ently exist in the
    destination service. You can create destinations in the NWA under
    Configuration Management->Infrastructure->Destinations..

  • UDDI Exception : publishing the service registry

    Hi,
    have anybody faced the error below :
    com.sap.esi.uddi.sr.api.exceptions.SRExceptionerror code: null detail message: com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.UDDIServerRemoteException: <Localization failed: ResourceBundle='com.sap.engine.services.webservices.wscm.validation.accessors.validation', ID='REMOTE_EXCEPTION_UDDI_SERVER', Arguments: ['http://dvjcen00:*****/uddi/api/inquiry/', 'http://dvjcen00:*****/uddi/api/publish/']> : Can't find bundle for base name com.sap.engine.services.webservices.wscm.validation.accessors.validation, locale en->com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.UDDIServerRemoteException: <Localization failed: ResourceBundle='com.sap.engine.services.webservices.wscm.validation.accessors.validation', ID='REMOTE_EXCEPTION_UDDI_SERVER', Arguments: ['http://dvjcen00:*****/uddi/api/inquiry/', 'http://dvjcen00:******/uddi/api/publish/']> : Can't find bundle for base name com.sap.engine.services.webservices.wscm.validation.accessors.validation, locale en->com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Invalid Response code (401). Server <http://dvjcen00:******/uddi/api/publish/> returned message <Unauthorized
    Can anybody suggest on that . At the time of Publish the service registry it comes.
    Rgds,
    Deep

    Hello Deep,
    Have you tried to assign the SERVICES_REGISTRY_READ_WRITE role to the user that is trying to publish?
    Thanks & Regards
    SU

  • Regarding  the Service Registry in SAP  PI 7.1 and non SAP System ....!

    Hi All ,
    I  need to know answers for the below Question ...hope to get some answers frm Experts ....
    1) How to publish service from non-SAP systems?
    2)  How to use discovered service in the Service Registry for consumer/provider scenario? With some examples.
    Thanks in Advace ...!
    Regards ,
    Aziz khan .
    Edited by: Aziz khan on Sep 16, 2009 11:43 AM

    Hi,
    1) How to publish service from non-SAP systems?
    Publish Service is nothing but making WSDL of that service available. For that you need to Publish the WSDL of the web Service to UDDI. For Non SAP system, Lik .net , Java they have there oun APIs to do so. U can search on net to get it.
    For Ex. below link.
    http://www.startvbdotnet.com/web/publish.aspx
    2) How to use discovered service in the Service Registry for consumer/provider scenario? With some examples.
    Once you discover the services, you get the WSDL of that Service. Then You can import this WSDL in IR and you it.
    See the below links.
    http://help.sap.com/saphelp_nw04/helpdata/en/43/ce993b45cb0a85e10000000a1553f6/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/EN/26/9e97b0f525d743882936c2d6f375c7/frameset.htm
    Shweta

  • Error the service FWSRV of TMG 2010 on Windows server 2008 R2 Enterprise

    Please help me about a issue of TMG 2010:
    My company installed TMG 2010 on Windows server 2008 R2 Enterprise but it happen error " Due to an unexpected error, the service fwsrv stopped responding to all requests. Stop the service or the corresponding process if it does not respond, and
    then start it again. Check for related error messages."
    and " The Firewall service stopped because an application filter module C:\Windows\SYSTEM32\ntdll.dll generated an exception code C0000005 in address 0000000077A72F86 when function CompleteAsyncIO was called. To resolve this error, remove recently
    installed application filters and restart the service."
    I have reinstall but there error also appear again. My company use about 2000 clients access through TMG 2010.
    i have try update windows and TMG latest but can not solved this issue.
    i hope everyone help me as soon as. thank you so much.

     
    HI Luis,
    Not sure whether this will fix your issues however give it a try and let us know so that other can also provide suggestion.
    Disable
    Antivirus
    Monitoring Tools / Hardware Diagnostics tools which comes with Server vendor
    Try -
    http://support.microsoft.com/kb/2649961
    http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2649961&kbln=en-us
    Ensure you have enough space for Log to be stored

  • PI 7.1 How to delete a published service from the service registry?

    Hello,
    I have the same problem in the pi 7.1, like Rahul in CE (Composition Environment) with the deleting of published services.
    How to delete a published service from the service registry?
    In the WS navigator I found only this operation:
    deleteClassificationSystemValues and deleteClassificationSystem
    I miss the operation deleteService.
    Have you an idea?
    Bye
    Stefan

    Hi all,
    I have opened an oss message and now I have an answer:
    Use this Service: ServicesRegistrySiService and the operation deleteServices with the logical key of the service as parameter.
    The logical key can be seen from the SR UI in the details of the endpoints.
    Bye
    Stefan

  • Documentation of services in the service registry

    Hi all,
    in the service registry i can publish a documentation url for enterprise services.
    How can i make a documenation for NON-Enterprise Services?
    Can i publish a URL for normal web services?
    How can i document a normal web service?
    regards

    Not possible yet.

  • Cannot start VM - IDE Emulator Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.'

    HI all.
    New install of 2008R2 on HP DL-380 G6.  I have created (several) VM's none of which will start.  If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD). 
    It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD.  The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD?  I can attach the VHD
    in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
    Full error is:
    'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
    'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
    (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
    'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
    (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
    Any Ideas?

    Hi ,
    Did  you try to disable the services , if they are exsit :
    HP Smart Array SAS/SATAEvent notification
    HP Insight storage agents
    Then restart your server .
    Best Regards
    Elton Ji
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Question about the Service Registry

    Hi Folks,
    I am currently writing a report on the need for our company's SAP interfaces to be moved from the Visual Studio 2003/SAP .NET Connector 1.0 platform to one of the two more up-to-date technologies: ESOA or SAP .NET Connector 3.0.
    My question is regarding the SAP Services Registry. I understand that a web service is created in Visual Studio, deployed to a local web server, and then to the RS. Where should the RS reside? We are a global company and our interface is used in about 40 sites - will there be one RS for all of these sites?
    Sorry, if this is very naive. I'm just beginning to get to grips with this topic.
    Many thanks,
    David

    Hi David,
    The most important thing here is that the Service Registry is only relevant during design-time, not at runtime. The webservice itself won't be deployed to the SR, the webservice WSDL (along with additional information on usage & security restrictions) will be published in the SR. The SR is like a listing of your available Provider Webservices, with controlled access.
    You'll need to elaborate a bit more on the 40 sites statement, i.e. will they be developing their own consumer service for your one service? If they are, they will only need to access the SR initially to get the WSDL during development, thereafter at runtime, they will call the runtime endpoint defined by you & not the SR.
    They will only visit the SR again if the service contract changes from your side and you have a new WSDL. Even then, they can work with an offline WSDL that you provide them so SR connectivity in not mandatory.
    Regards, Trevor

  • How To Configure TREX Name Server&Port for UDDI  Service Registry Settings

    Hello Experts,
    we are using CE 7.1 SP 4 and I would like to use the trex service in the Service Registry.
    I use \NWA\Service Registry Configuration\Service Registry Settings\Keyword Search and want to test the TREX Communication using the Test Connection Button.
    If I do so, I receive "Connection to TREX not successful".
    When I press the Update TREX button I receive this exception:
    com.sapportals.trex.TrexException: TREX Name Server (including back-up servers) is down or not accessable. (Errorcode 7217)
    I tried to configure the trex.service with the two parameters: nameserver.address and nameserver.backupserverlist -> tcpip://myhostname.mydomain:30001 (Instance 00).
    I am not sure if the port number is correct -> is there a way to lookup the correct port number?
    Is there something else I should configure?
    Thanks for help, best regards
    Thomas

    Hi Ganesh,
    In order to access the Visual Administrator, go to Start > Programs > SAP J2EE Engine > Visual Administrator. After you login, you will see 2 nodes i.e. Dispatcher and Server. Expand the Server node. Then go to "Services" and expand it. Then go all the way down to "TREX Service". Then on the right hand side, go to the property "nameserver.address" where you will key in "tcpip://<nameserver>:<port>". Then hit "Update" and click on the "Save" button. Then when you go to TRex Monitor, you should be able to see the Name Server running. Hope this helps.
    Thanks,
    Sri
    P.S Please rewards points if you find this helpful. Thanks.

  • BPM Error in publishing webservice in service registry

    hi,
    i am getting following error when i try to publish webservice wsdl file in service registry.
    please let me know do i need to do any settings in nwa
    com.sap.esi.uddi.sr.api.exceptions.SRExceptionerror code: null detail message: com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.ValidationException: <Localization failed: ResourceBundle='com.sap.engine.services.webservices.wscm.validation.accessors.validation', ID='WSDL_WSDL_EXCEPTION', Arguments: ['IO Exception occurred while parsing file:Invalid Response Code: (500) Internal Server Error. The requested URL was:"http://sapsbx11:50000/PurchaseOrderCreateRequestConfirmationInService/PurchaseOrderCreateRequestConfirmation?wsdl"', 'http://sapsbx11:50000/PurchaseOrderCreateRequestConfirmationInService/PurchaseOrderCreateRequestConfirmation?wsdl']> : Can't find bundle for base name com.sap.engine.services.webservices.wscm.validation.accessors.validation, locale en->com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.ValidationException: <Localization failed: ResourceBundle='com.sap.engine.services.webservices.wscm.validation.accessors.validation', ID='WSDL_WSDL_EXCEPTION', Arguments: ['IO Exception occurred while parsing file:Invalid Response Code: (500) Internal Server Error. The requested URL was:"http://sapsbx11:50000/PurchaseOrderCreateRequestConfirmationInService/PurchaseOrderCreateRequestConfirmation?wsdl"', 'http://sapsbx11:50000/PurchaseOrderCreateRequestConfirmationInService/PurchaseOrderCreateRequestConfirmation?wsdl']> : Can't find bundle for base name com.sap.engine.services.webservices.wscm.validation.accessors.validation, locale en->com.sap.esi.uddi.sr.impl.uddi.wsdl.validation.ValidationMessage: <Localization failed: ResourceBundle='com.sap.engine.services.webservices.wscm.validation.accessors.validation', ID='WSDL_WSDL_EXCEPTION', Arguments: ['IO Exception occurred while parsing file:Invalid Response Code: (500) Internal Server Error. The requested URL was:"http://sapsbx11:50000/PurchaseOrderCreateRequestConfirmationInService/PurchaseOrderCreateRequestConfirmation?wsdl"', 'http://sapsbx11:50000/PurchaseOrderCreateRequestConfirmationInService/PurchaseOrderCreateRequestConfirmation?wsdl']> : Can't find bundle for base name com.sap.engine.services.webservices.wscm.validation.accessors.validation, locale en

    Hi,
    In CE 7.1 Ehp1 we need not publish the web service directly to the service registry. We can publish all the webservices using NetweaverAdministrator.
    Please go through this link to know how to publish the webservice to the Service Registry using NWA.
    [Publishing WebServices from the Netweaver Administrator|http://help.sap.com/saphelp_nwce711/helpdata/en/48/56855c708131c3e10000000a42189d/content.htm]
    Regards,
    Gayathri

  • Error in publishing endpoint in service registry

    Hey,
        I am gettin the following error while publishing the service registry.
    10160A save request exceeded the quantitylimits for a given structure type. #Number of Business Entities exceeds your limit 1(2).
         This is with respect to  the endpoint. The endpoint is also not published when  I checked it in the service registry of PI.
    regards,
    Milan.

    Hi Milan,
    Open your UDDI client->Select Publish->Select Retrieve My Business
    check if you are able to add more than one Business entity.
    You find out all the Business entities present in the UDDI, Take their keys (UDDI Keys)
    then go to Publish->Select Retrieve My Business
    create business entity with the key you have obtained before and then delete that, It will delete the the business entity and then try to publish the your service with end point.
    Thanks,
    Sunil Singh

  • Business Object creation error: The service mapping is missing

    Hi developers,
    In my CAF 7.1, I have my business object "maintenanceRequest" with several attributes.
    Persistency is remote. Permission check is disabled.
    Create operation is mapped to the external service (enterprise service) createMaintenanceRequest.
    The input fields are mapped, output fields are not mapped since create operation doesn't have any.
    All the other operations are not mapped.
    I have exposed as web service the operation "create",
    I have generated, built and deployed the app.
    When I try to run it from wsnavigator I get an error in the SOAP response:
    com.sap.caf.rt.exception.CAFCreateException: The service mapping is missing
    Please note that the ES works ok (e.g. from Visual Compose 7.1).
    The ES was imported in NWDS 7.1 from service registry.
    Can anyone please help?
    Thanks, regards
    Vincenzo

    Hi Sampath, thanks for your helpful reply.
    I followed the steps from saphelp, but I get errors.
    I mapped my external service destination (an R/3-based Enterprise Service published in service registry) to:
    - UDDI_DESTINATION (error: objectNotExist) [but the ES is correctly published in service registry]
    - wsdl address in backend R/3 system (error: Deserializing WSDL stream failed)
    how should the logical destination be configured?
    Thanks a lot
    Vincenzo

  • Server Admin keeps dispaying error "The service has encountered an error."

    All the services in the Server Admin function are continuously displaying the following error message:
    The service has encountered an error.
    Try to refresh the view (servername.local/servicename). (kNetworkError)
    I press OK and the message disappears, but I have to go through every service to remove this message, and then it just reappears a little later. But it doesn't seem to affect the operation of the server, but I'm concerned that this is disguising a future problem and would like to get rid of this occurring. I have searched the forums and found nobody to help me. Please can anyone help me?
    Message was edited by: Viking Marauder

    Thanks guys, it seems this is a feature of the operating system and Apple have not bothered to find a solution, maybe because you're not supposed to leave the server admin open for long periods of time. A little disappointing, however it does not seems to be causing any other problems with the server as it is running perfectly well.
    Thanks to everyone for your input, I'll close this issue now, and as Jamie Curmi stated this may be resolved in the next release of the OS.

  • ERROR: The Service Component Container is not running: Standalone Workflow

    We're trying to get the java notification mailer established through the OEM 10g Application Server Control. But the mail agent listener servlet container (WFALSNRSVC), and the mailer service servlet container (WFMLRSVC) are not running. Because of that, I cannot get any other parts of the mail configuration running. Note, I can successfully complete getting through the 8 steps of the "Workflow Notification Mailer" configuration (e.g. IMAP and SMTP mail accounts work fine and are accessible from the Workflow application server). What's the trick to getting the servlet containers running?? All I find in Oracle documentation is that these must be running before you can do anything, but I don't find anything on troubleshooting when they are not running.
    Thanks.

    Hi,
    I'm having the same problem as you did.
    I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
    And it showed
    An error has occurred!
    The Service Component Container is not running.
    Should I uninstall my Oracle Workflow?
    And install a new installation of Oracle Workflow?
    What does it mean by the "wfinstall"?
    Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
    Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
    Or should I uninstall all of my Oracle installation and start installing from the beginning?
    BTW, what if I don't use (or have) OID?
    Is it required?
    Any clue would be grateful.
    Thanks.
    Buntoro

  • I'm out of the country right now and I want to suspend my verizon service, but I couldn't. It says "Error, the service is not available at this time. Try it later" What should I do?? Plz Help me!!

    I wanted to suspend my verizon service, but I couldn't. The web shows "the service is not available at this time. Try it later..." How can I address this problem??

        Hi Shell126 - We certainly want you to be able to easily manage the account while so far from home! Have you tested a different web browser? Also try clearing the cookie and temporary internet files on your current browser. I am eager to help get this resolved!
    Thank you, 
    YaleK_VZW
    Follow us on Twitter @VZWsupport

Maybe you are looking for