Error: The procedure entry point findactctxsectionstringw could not be located in the dynamic link library KERNEL32.dll
I recently updated my antivirus to Norton 360 and also installed Internet Explorer 8. Now when I try to open firefox I get the error message that I have included below.
== This happened ==
Every time Firefox opened
== After I updated to Norton 360 antivirus ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322)
I have the same problem every time i start firefox. it even happens in safe mode. i am using windows 7 enterprise basic installation with no updates & kaspersky pure as anti virus. The laptop is a dell inspiron 1520 & also firefox keeps crashing due to problem with Adobe flash( i have updated flash & firefox to the latest version). Please help fix this problem!!
Similar Messages
-
Please help
Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
-
After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update. -
While opening the iTune Store i receive the following error, "The procedure entry point ADAdPolicyEngine_DidEnterSation could not be located in the dynamic link library iAdCore.dll" Please help me to clear this error.
I faced the same issue. This solved it for me: Troubleshooting issues with iTunes for Windows updates
Hope this helps. -
I use both a Mac and a PC. My problem is on my Windows 7 PC. I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I am told this is related to iTunes. Any help out there? Thanks
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
re-install Itunes and what version??Refer to this thread - https://discussions.apple.com/message/15685210#15685210
Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder" -
When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll" Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
I have a error message when i turn on my computer. AppleSyncNotifier.exe - Entry Point Not Found. The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
Any thoughts?Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well. -
Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belleThis is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him. -
When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.
Any answers how to fix it? All Im getting is error for the past 3 days!
-
When I click on Mozilla Firefox I get an error box firefox.exe - Entry Point Not Found that reads "The procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll."
Are you really using Windows ME?<br />
Your More system details list shows an IE8 user agent
You need to do a clean reinstall and remove the Firefox program folder before installing a newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
I downloaded the latest version of iTunes on my PC. Now I cannot open iTunes. I receive the following error message: "The procedure entry point AVCFAssetCreateWithByteStreamAndOptions could not be located in the dynamic link library AVfoundationCF.dll" After pressing the "OK" button I receive a second error message: 'iTunes not installed correctly. Please reinstall iTunes. Error 7 (Windows error 127)". I've uninstalled iTunes and reinstalled to no avail. I've also eliminated the temp files (per suggestions on the trouble-shooting page) and no luck. I also tried system restore and that did not fix the problem. Any thougths on a repair?
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a -
I am unable to connect toitunes i have followed the troubleshooting for unistalling and installing iTunes and i still get this error message and it will not open the following is the error message: The procedure entry point AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll.
then i get this other error message also as follows: iTunes was not installed correctly. Please reinstall iTunes error 7 (Windows error 127)
can anyone help me?See Troubleshooting issues with iTunes for Windows updates.
iTunes 11.1.5 was released today and may work better for you.
tt2 -
My problem is after installing itunes 11.4 this is now a problem
The procedure entry point ADiAdID_AcquireMatchSlotIfNecessary could not be located in the dynamic link library iAdCore.dll
is the first ERROR and
some error 127 reinstall
can you please tell me how to fix it?
Im running Windows Vista
All I want to do is back up my iphone 4s, so i can add my iphone 6 Very FustratedRead Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?
Maybe you are looking for
-
So slow listing network shared folders and drives.
Hi!! I'm reporting a very slow connection between my MacBook Pro 13" (snow leopard) and my MacPro 8 core (leopard). When I try to reach the macpro in finder (shared) passed 1 or 2 minutes until the system ask me user/pass, then show me the list of my
-
Sharing music from laptop to Imac duplicates in library
Everytime my daughter or wife download music to laptop then I update library on Imac it duplicates the whole library again. I just got rid of exact duplicates on Imac, so now my question is how do I transfer between the two with out transfering the w
-
5417 Dynamic Authorization failed
Hi guys, Does anyone meet this Radius Error in Cisco ISE 1.2 and the switch 2960 12.2(55)SE7 ? When i reauthentication the guest profile to the other profile using Radius CoA on the Self-Service Guest Workflow. The error is : Event 5417 Dynamic Autho
-
Hi, is it possible to specifie a zip or tar file (instead of folder path) in the source attachment of a swc in a library path ? thanks, vdelbart
-
What happened to my registration?
i installed the latest Photoshop Extended CS6 and completed registration, this all worked well for a few days now my product registration has disappeared from my account. I have tried going through the help sysyem and get to the 'register my product'