Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab"  lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection.  An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon.  This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed. 
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix.  Again this is for the "Roaming" profile creation no local.
Many thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki

Similar Messages

  • Error : The Project File can not be loaded

    Dear all,
    We have deleted the copernicus folder from my documents to remove cache.
    But now while opening my project i see error message like this
    please help!

    Hi Horst,
    Tried that not working.  Issue is that the file ".myproj" doesnot contain any data.
    and one of the ABSL file also contains not data.
    and if i try to refresh i get the error message "The solution was not opened correctly , please report incident to AP-RC-BDS-SOL.
    This is very frustratating .
    I have raised the incident with very high priority yesterday , but still no reply
    I think if i check on web ui my solution is working fine so they just need to send me those files again then if i try things will be synced again.

  • The user profile service: Service failed the log on. User profile can not be loaded.

    I am running a Windows Server 2008 R2 domain. with 2 domain controllers.
    Every new account created in active directory does not seem to work. Even if the account it copied from one that does still work, it still gives the same error when logging in on a network computer (windows 7). "The user profile service: Service failed
    the log on. User profile can not be loaded."
    I have looked at http://support.microsoft.com/kb/947215, which unfortunately does not help. Especially since the SID is not there because the user has not managed to log on yet.
    The
    "Do not logon users with temporary profiles" Group Policy setting is not configured.
    And I have tried force replication too.
    I have exhausted all my knowledge.
    Please help
    Regards
    Phil

    It might be that the default user profile is corrupted. See that: https://helgeklein.com/blog/2013/09/error-message-explained-user-profile-service-failed-logon/
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

  • Captivate 6 Video Issue: "The flash video can not be loaded. The input may not be proper"

    I've already published this particular project with multiple videos embedded with no problems in Captivate 6. I had to change one video and went to re-publish the project. Upon completing the publish, I receive an error message on EACH slide that has embedded video:
    "The Flash Video Can Not Be Loaded. The Input May Not Be Proper"
    There wasn't any issues with the project until changing the one video that needed to swapped out. I also tried publishing this in Captivate 8 to the same results.
    Specs:
    Windows 7 Pro
    Captivate Version 6.1.1.240
    Intel Core i5 25-20 CPU @ 2.5 Ghz
    4 GB RAM
    32-Bit Operating System
    If anyone knows why this issue has presented itself and how we can get around it, much would be appreciated!
    Thanks,
    Jon

    Hi there,
    Thanks for reaching Adobe Community. Please accept my apologies for the inconvenience.
    I am a little confused here. Are you getting this error while inserting a FLV video through Insert option or inserting a video through Video > Insert Slide Video or inserting a new slide?
    Re-linking means reinserting the video file. If you have already tried reinserting the video file, then have you tried inserting a different video?
    Also what operating system you have on your system?
    Thanks!
    Shekhar

  • How do i get a radio station number from  down load the station tomy ipod, how do i get a radio station number from itunes it only plays on the computer i can not down load the station tomy ipod

    How do i get a radio station number from itunes it only plays on the computer i can not down load the station number as it does not show one to my ipod

    Which iPod? 
    iPod Manuals
    iPod Models

  • Your firefox profile can not be loaded. it may be missing or inaccessible

    i just updated my computer, after i did so, firefox wont open, it says your firefox profile can not be loaded, it may be missing or inaccessible. I have read every thread in here, and nothing works. i can't find the profiles.ini folder and i cant create a new profile. what to do now?

    A likely cause is a problem with the profiles.ini file and the profile marked as Default=1 in this file is no longer present on the hard drive.
    */Users/<user>/Library/Application Support/Firefox/
    *http://kb.mozillazine.org/profiles.ini_file
    You can use one of these to make Firefox create/use a new default profile:
    *Delete the profiles.ini file to force Firefox to create a new default profile
    *Use the Profile Manager to create a new profile
    *Use "Choose Folder" when you create a new profile to select the location of a lost profile and recover this profile
    *http://kb.mozillazine.org/Profile_Manager
    *https://support.mozilla.org/kb/Managing+profiles
    *http://kb.mozillazine.org/Profile_folder_-_Firefox

  • VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

    I have been programming/interfacing VBAI2012 and LV2011 for two years already.
    There is one very frustrating problem:
    - Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
    - and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
    Is there any log file which I can check?

    Guys,
    I have resolved this issue and successfully installed and configured jive forums on my laptop.
    I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
    Cheers,
    Sandeep

  • The flash video can not be loaded. The output may not be proper

    Hi there,
    using CP7, I changed a couple of things on some slides and now I get the above message when publishing and/or previewing. I have search the forum and found others have the issue, but no answer how to fix it...?
    Anyone still getting this error?
    Kind Regards
    Rossco

    Hello....
    Can anybody help with this..?
    Cheers
    Rossco

  • User settings can not be loaded

    Have looked at the setting for parental control and since the system is no longer the setting for users. What can I do?

    I am having the same issue -  User Profile failed login - user profile cannot be loaded. 

  • The project file could not be loaded

    a new windows 8.1, VS2013 install ... I use skydrive to sync all my source files to a folder named c:\skydrive. When I try to open a .SIN file from the c:\skydrive folder I get an error in visual studio:
    C:\Skydrive\c#\AutoCoder\AutoCoder.csproj : error  : The project file could not be loaded. The file cannot be accessed by the system.
      C:\Skydrive\c#\AutoCoder\AutoCoder.csproj
    When I right click the .csproj file in windows explorer I do not see a security tab. Not sure if my user is authorized to the file or not.
    How to open a project in VS2013 from my skydrive folder?
    thanks,

    Hi Steve,
    Generally we could open the project from the skydrive folder, I often use it. As you said that it doesn’t work in your VS, I doubt that it would be related to this project.
    Please delete the .suo file in your project folder, and then reopen the project file again (.csproje) again.
    If possible, you could run your VS as the admin, and then open this project.
    If still no help, maybe you could create a new project for it.
    http://stackoverflow.com/questions/11171322/how-can-i-recover-a-corrupt-csproj-file-in-visual-studio-2010
    Or you would contact the developer who created this project.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The MBean class could not be loaded by the default loader repositor

    Im trying to register a custom MBean to WebLogic 8.1 Sp5 Application Server but i get this error :
    The MBean class could not be loaded by the default loader repository .
    i have make a servelt that registers the Managed Bean i added the MBean jar file to the WAR file of the servelt and I added the Mbean jar file to the CLASSPATH in setEnv.cmd for the domain
    the code for the servlet is this :
    try
    Hashtable props = new Hashtable();
    props.put( Context.INITIAL_CONTEXT_FACTORY,
    "weblogic.jndi.WLInitialContextFactory" );
    props.put( Context.PROVIDER_URL, "t3://naiden:7001" );
    props.put( Context.SECURITY_PRINCIPAL, "admin" );
    props.put( Context.SECURITY_CREDENTIALS, "secret:)" );
    InitialContext ctx = new InitialContext( props );
    mbeanServer = ( MBeanServer )
    ctx.lookup( "weblogic.management.server" );
    logger.debug( "domain name e " + mbeanServer.getDefaultDomain() );
    catch( NamingException ne )
    error=ne.getMessage();
    logger.debug( ne.getMessage() );
    try {
    ObjectName objName = new ObjectName("isy:Name=NaidenStandardMBean");
    mbeanServer.createMBean("samplembean.Standard", objName);
    catch( MalformedObjectNameException ex )
    }

    You should use jre 1.5 or 1.6 for migmon from 7.10. It looks like your jre is 1.4.

  • I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.

    I am trying to download Firefox on my laptop which runs Vista. I am getting the following error message: Your Firefox profile can't be loaded, it may be missing or innaccessible." Please help.

    See:
    * http://kb.mozillazine.org/Recovering_a_missing_profile
    * http://kb.mozillazine.org/Profile_in_use
    * https://support.mozilla.com/kb/Firefox+is+already+running+but+is+not+responding

  • Unable to log into FaceTime it says "the server encountered an error processing registration please try again later. Apple ID is verified ok but could not login. Please help. Thanks

    Unable to log into FaceTime it says "the server encountered an error processing registration please try again later. Apple ID is verified ok but could not login. Please help. Thanks

    I had the same problem and found the solution here:
    https://discussions.apple.com/thread/3189272

  • RVO42G VPN Error - The Remote Gateway is Not Responding. Do you want to wait?

    I have followed the instructions @
    https://supportforums.cisco.com/docs/DOC-29399, but continue to receive the error message The remote gateway is not responding.  Do you want to wait? 
    According to the RV042G, it shows the connection was made and the status is set to "online" for the user, but choosing to wait does not connect and the error returns eventually requiring you to select "no" to waiting.
    Thanks for your help.
    Clinton

    Thanks for reaching out Abhishek.
    I am trying to setup a Client to Gateway VPN so I can utilize the 50 available tunnels.  I have setup a Group VPN with user accounts associated with it.  I have installed the Cisco QuickVPN client on Windows 7 and Windows 8 clients and have attempted to login.  I have followed the instructions that Cisco posted @ https://supportforums.cisco.com/docs/DOC-29399, but cannot connect a remote client successfully.  I recieve the error: 
    The remote gateway is not responding.  Do you want to wait?
    Looking at the VPN log on the RV042G, I see:
    Jun 26 11:27:45 2013    VPN Log (qknips0): deleting connection
    Jun 26 11:26:51 2013    VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
    Jun 26 11:26:51 2013    VPN Log forgetting secrets
    Jun 26 11:26:51 2013    VPN Log listening for IKE messages
    Jun 26 11:26:51 2013    VPN Log added connection description (qknips0)
    Jun 26 11:25:41 2013    VPN Log loading secrets from '/etc/ipsec.d/ipsec.secrets'
    Jun 26 11:25:41 2013    VPN Log forgetting secrets
    Jun 26 11:25:41 2013    VPN Log listening for IKE messages
    Jun 26 11:25:41 2013    VPN Log added connection description (grpips0)
    Jun 26 11:25:41 2013    VPN Log (grpips0): deleting connection
    I don't know what else to do to get the QuickVPN client working so I can take advantage of the VPN service and 50 tunnels.
    Thanks.

Maybe you are looking for