Error time interval Bex analyzer

Hello
I have a report where I need to show the number of transactions for users and machines, ranges of hours, I created a structure with field time intervals, for the amount of transactions that fall into each range of hours, but I observe that repeats the amount of transaction in two ranges of hours but can not find the reason why he repeats, for example there are two ranges of hours and 14:00:00 to 15:00:00 and 15:00:00 to 16:00:00, and check the time of operation 15:10:00 should fall in the range of 15:00:00 to 16:00:00 but the report also showing me what is in the range 14:00:00 to 15:00:00 which should not be correct, since it is after 15:00:00.
Can someone help me to stress going on?
Under the image of the report as it is showing.
regards
Nando.

Please check the range value properly if possible share the logic used as well.
Regards,
AL

Similar Messages

Error when launching BEx analyzer from Portals

BI Gurus...
We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
Bex Analyzer is primary mode of reporting at this time.
After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
Has anyone faced this issue before?
Is it possible to launch BEx Analyzer from EP?
Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
Please provide your thoughts/experience.
Thanks,
Ajay.

Hi WernerS,
Thanks for your response.
The RRMXP Transaction works and it launching the BEx Analyzer as expected.
Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
1) Call via a URL
You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
●      Parameter to open the workbook: ?WBID=<wb_id>
I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
I tried opening the file in notepad and I see the following parameters passed.
           test
           Data=BX2,CONAJP,EN,mikoyan,17,,,250,
           9
Any clue about what I am doing wrong?
2) Calling via a Transaction
You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
●      The Transaction Code for all workbooks is RRMXP.
●      The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
Any thoughts on where am I going wrong ?
Thanks,
Ajay.

Error when starting Bex analyzer

Hi All!
We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
<install error> Missing ActiveX component: Business Explorer Global Services
Does anyone have a hint on what to do?
Thanks for your help!
Best Regards
Pontus

hi
try to check with SAPBEXC.xla
and take a look oss note 585643
may need to manual register .dll with regsvr32
Do an Installation check of the BEx Analyzer as follows:
In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls.

Error message during BEx analyzer execute

Using BEx analyzer, system show error message like below:
Variable 0P_FVAEX could not be replaced;
Program error in class SAPMSSY1 mehtod: UNCAUGHT_EXCEPTION
System error in program CL_RSR_REQUEST and form TEXT_ELEMENTS_GET:VARIABLES_SUBMIT(see long text)
Who can solve this problem? Thanks!
Message was edited by:
Almini Sanbra

Dear sanbra,
We have faced the same error and its resolved after applying the
Following:
I have applied the following Note
1079186 Error when you filter by characteristic values
Please also apply the following patches to your system:
Support packages and patches ->SAP netweaver->SAP Netweaver->
SAP Net weaver 2004s->Entry by component->BI java
Update with the latest patches
1)BIBASES12P_4-10003477.SCA Patch for for BI BASE SERVICES 7.00 SP12 4
2)BIWEBAPP12P_4-10003476.SCA Patch for BI WEB APPLICATIONS 7.00 SP12 4
3)BIIBC12_0-10003495.SCA SP for BI INFORM. BROADCASTING 7.00 0
Regards,
Suman Raju.
***********IF useful some points please***********

Error when using BeX Analyzer 7.0 with Excel 2007

When i try to execute a query in BeX analyzer 7.0 and my microsoft excel version is 2007, there will always have a fatal error showing. However, when i use the Bex Analyzer 3.5 , i could execute the query.
Anyway to solve this problem?

You need to do the following
Identify the SAP GUI version you're using, 6.40 or 7.10, and the patch level.
Identify the BW or BI Add-on and patch level of it.
From there, check to see if the versions you have actually support BI 7.0 and Excel 2007. Reliable Excel 2007 support requires failry current patch levels of both the SAP GUI and the corresponding BW/BW Add-ons..
Do you have access to a PC that has a more recent version of the SAP GUI and BW/ BI Add-on? If so, try using that PC and see if you still have the problem.

Should display both Spanish and English lang. at a time in BEx analyzer

Hi All,
I need to display both Spanish and English lang. in Bex analyzer.
InfoObject is language dependent.
Ex: For material it should display description in Spanish and English at a time.
Am only able to display one at a time.
Please suggest.
Regards,
Sandeep.

Hi Sandeep,
As Kodandapani mentioned it’s not possible to display both languages same
time as its mapping to same T table where LANGU is part of key.
I recommend you to create an attribute or maintain another table for other
language to display at a time.
if anybody get any better ideas then pl share.
Regards,
Naveen Kencha

Getting error while opening bex analyzer in BI?ple help me asap

a critical program error occured
the problem has to close
ple refer to the trace forther onformation
say ok
SAP BExAnalyzer application has encountered a problem and needs to close. We are sorry for the inconvenience.
saihng ple tell the probelm to microsoft.
ple let me know
how can i solve it.

Is this only happening on your computer or have you tried other people? If it is only your computer I would restart my computer and try again. Also, if you close out all excel windows you have open and type in transaction rrmx it should open BEx for you..

Regarding Error while executing Bex analyzer after execution

HI,
Need in urgent.
I had created a bex query which contains suppose columns A B C(amounts) , Based on this two columns a formula is created F1 = (AB) and F2 = (BC) and F3 = (F1 / F2) now in this case when F2 does not contain any value it is giving "X" in red color. I tried if as " (F2 <> 0 * (F1/F2)) " it is not working, i thing because when I see the out put in the column F2 where their is no value at that place it is not containing "0" (Zero) But contains space.
I have a thought but not able to implement in the formula " (F2 <> Space * (F1/F2)) " But not able to write space.
So is their any way to solve this.

Hi,
U mean when F3 = (F1/F2) and F2 is not having any value then you are getting value of F3 as red X. Their is an inbuilt function to avoid this divide by zero problem.
That inbuilt data function is NDIV0(F3), where F3 = Calculated Key Figure.
You can also set how to display the bex values with transaction RSCUSTV4. Here you can set the display setting for following values in Bex Query Designer:
1. Division by 0
2. Does not exist
3. Mixed Values
4. No Authorization
Check out this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/71/0aec3b6e011341e10000000a114084/content.htm
Regards
Raj Rai

Error In WorkBook Bex Analyzer : Messages available

Hello Experts,
When i open a Workbook, I have this message in the status bar:
"Messages available; double-click to display them"
When I double click, I have a pop-up window with warning "there is a condition.., results row supress..."
Our client don't want to see the message ""Messages available; double-click to display them", When he opens his workbook.
How can we do this, Please?
I found this link:
http://help.sap.com/saphelp_nw70/helpdata/en/89/127f4a697c49a7896f18a45dd30e8b/content.htm
But it doesen't work!
Many thanks.
Best regards,
Amine

Hi Amine,
Option 1)
Try this - there is an option called "Show messages for problem analysis" in the behavior tab of global settings. try to uncheck that if it is checked.
or
Option 2)
Try Note 1009903 - Suppressing messages for all queries
or
Option 3)
Use tcode RSRT and type in the tcode "SUPPR_ALL" and check all the suppress messages.
Hopefully you will succeed.
Regards
Sunny

Error with BEx Analyzer

I am getting the following errors when launching BEx analyzer. What do I do to solve this"
Error Group
RFC_ERROR_PROGRAM
Message
SAPLOGON_ID 'BID - Netweaver 7.0 EHP2 BI' not found in saplogon.ini

check if you are to logon to Query designer for the same system and client. I guess you will not be able to correct.
Most probably, entry for the system is missing in the ini file. check if you are able to connect to Bex analyzer on some other system. If yes, copy the INI file from that system to your system.
you should be able to ini file
C drive > Program Files > SAP > Front End
Regards,
Gaurav

BEx Analyzer is Slow to Load

Please can you tell me what happens when the BEx Analyzer loads for the first time? Excel seems to load quickly but the BEx Analyzer component can take over 30 seconds!
Is there anything that can be done to improve the start up time of BEx Analyzer on Windows XP and Vista PCs?
Thanks.

I also forgot to add that for some of the pages that don't load or load slow. if you actually type the address into the address bar preceeded by "https://" instead of relying on search links or bookmarks it will load.

Run-Time Error '6' Overflow within BEx Analyzer after copy/paste query

Hi all,
User is getting a "Run-time error '6' overflow" message which is caused after copying any query in a 'query pack' to any free row/column within the same sheet (BEx Analyzer). This "query pack" has multiple queries within one sheet and covers 1800 rows so there is enough free space left for copying one of the queries to another position in the same sheet.
Microsoft Office Excel SP2 is used which is part of MS Office professional edition 2003. The BW version is 3.0.
Please let me know if more details are required or above mentioned error message is recognized and can be explained.
Thanks and kind regards,
Raymond Flaton

Hi VRV,
This error is caused whenever there is memory issue. If your query is built on a cube which has a BWA index then this problem can be related to the issue with the BWA server. Check your BASIS team to check if there is memory issue presently in the BWA server.
Sometimes the issue is temporary, where the several users accesing the reports to fetch data from BWA lead to this type of error as the BWA gets overloaded. Try exiting the report and run it after some time again.
Alternatively you can also try restricitng the selection for fetching the data in the report as suggested.
Thanks

Vb error 'run-time error '13', type mismatch when starting SAP BEX Analyzer

Dear experts,
I encountered the above error whenever I opened the BEX analyzer either from the start program or call sap transaction 'RRMX'.
My desktop is currently running BEX 3.50 with patch level 5 and office XP and my SAPGUI version is SAPGUI 6.4 compilation 2, patch level 11.
I have tried installed and reintalled SAPGUI and also downloded the latest patch from the net but still having the same problem.
Any input/help will be greatly appreciated.
Thank you,
NCW

I managed to solve the problem by uninstalling some of the recent Microsoft XP security patch (released in April '05). So, I think the problem is due to the security patch.
Just hope that there will be a fix by SAP so that we can still have the uptodate security patches.

Error in Bex Analyzer including the filter button command in Callback macro

Hello,
I have the following problem with the function filter button in the Bex Analyzer included in the callback macro:
Because of using 2 hierarchies in the filter the setting drill down to level 2 in the query gives no right output in the Bex Analyzer. The drill down level 2 is not shown. SAP recommends the include of a filter button to solve this problem. With a filter button in the sheet the problem was solved.
But after including the filter button command in the callback macro I get an error in MS Excel.
The callback macro starts, the filter was set by the user and the data was refreshed. Because of the refreshing of the filter the callback function the callback function starts several times. After setting the filter the first time, the following macro avoids the several starting of the set filter function:
Sub CallBack(ParamArray varname())
On Error GoTo err_handler
   Dim lRange As Range
   Set lRange = varname(1)
'Filter entfernend/delete filter
Dim ZeichenFilter As Long
ZeichenFilter = Len(Sheet4.Cells(41, 3).Value)
Dim Filter1 As String, Filter2 As String
Filter1 = Left(Sheet4.Cells(28, 3), ZeichenFilter)
Filter2 = Left(Sheet4.Cells(41, 3).Value, ZeichenFilter)
If Filter1 <> Filter2 And Filter2 <> "" Then
    onAction = True
    onAction = False
End If
'Filter setzen mit einmaligem durchlaufen/set filter and run one time
If onAction = False Then
    onAction = True
    Call Sheet4.BUTTON_55_Click
    onAction = False
End If
exit_handler:
    Exit Sub
err_handler:
    MsgBox Err.Description, vbOKOnly, "Error in " & " setMusterSub"
    Resume exit_handler
End Sub
After the filter was set the callback macro starts the second time. Then the Bex Analyzer erros with the sandglass. The working on VBA is possible, but not the working with Bex Analyer . Values in Excel werent shown.
How can I avoid this error?

Once I am adding VAR_VALUE_1 to the static parameters, the system generates two messages error:
Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
System error in program SAPLRRS2 and form GET_SID-1
Best Regards,
Hanit

Working in BEx Analyzer but giving error dump in Web Analyzer

Hello Experts,
I have a BEx Query, that has couple of customer exits for initial filter selection, and some base KFs and conditions as part of definition. When I run this query in RSRT or in Bex it was running fine, and results showing up in 3 to 5 seconds hardly 10 seconds.
but the same query throwing error in Portal / Web Analyzer.
error contains;
Error Summary : error processing the current request
root cause: The initial exception that caused the request to fail was:
java.lang.UnsupportedOperationException
Messages: warning there is a condition on Plant and Material to suppress results.
contest: under this heading many line of HTML code
when I debug the query in RSRT, I found any issue, all the exits, and the query is quite OK.
does anyone has any idea, whats going wrong?
we cannot suspect the portal / Java patches or anything, Because we have other queries running good.
could someone give me some idea..how to go through this portal/web related errors.?
Appreciate your time and help

Thanks for your help.
This issue was caused by "Bad programming in Customer Exit". Exit is trying to give too many Single values as selection to certain batch characteristics plus some are redundant. So code logic modified to fetch distinct values hence problem solved.
it worked in BEx analyzer but not in Web is just because of its limitations. As I said there is no syntax errors in the exit rather bad logic.
Thanks Again

Error time interval Bex analyzer

Similar Messages

Maybe you are looking for