Error type 10 with Agfa Snapscan USB Scanner

I'm getting an error type 10 whenever I try to start ScanWise, the software that comes with an Agfa SnapScan 1212u. I've tried reinstalling the software, extensions, etc. I've also reset PRAM.
Help!

Dan_Ross...
Your best bet is to go the Agfa's Website and check for available updates. I get that error if I forgit to update my origonal ScanWise software.

Similar Messages

  • Error code -36 with FAT 32 USB Flash Drive

    When copying files from my hard drive to a FAT32 formatted USB flash drive I keep getting error code -36 errors. I reformatted the flash drive to Mac OS Extended and the files copied fine. I formatted it back to FAT32 and the error returned. I need to use this drive with PC computers at school and can't leave it in the Mac format. Anyone know of a solution to this problem. It didn't do it with my G4 powermac and OS 10.4 but does with the mac mini with 10.6.

    This is a problem I've been dealing with since getting a new Macbook for christmas. In my case I use a Macbook with 10.6.2 at home, networked to a winxp computer, also use FAT formatted USB sticks for backups and taking files to work....and at work I use a mix of winxp machines and older macs running 10.3 and 10.4. I move files around between them all the time, and have had this annoying error -36 file copying problem with the 10.6.2 macbook since day 1.
    I did read about the dot_clean solution, and it does seem to work....sometimes. But the problem ISN'T just when copying a folder full of files. I also have the situation where I work on files in InDesign, and then export a PDF directly to the desktop. I then try to copy that ONE pdf file from the desktop to a FAT USB stick OR to an internet-accessed Appleshare volume, and I will get the dreaded error -36. MOST of the time when I get the error on a single file like this, it did actually copy and is useable on the USB stick / Appleshare volume and I can ignore the error. But sometimes not. Either way, it does show that the problem isn't just with folders of files, or even with the situation of copying a file from mac to windows to mac and then getting the error the next time you try to copy it to a win formatted volume.....you CAN get the error with an individual, just-created file in 10.6.2.
    I sure wish Apple would fix this already!

  • Driver for Agfa Snapscan 1212u to work with Mac OS 10.4.11

    Since obtaining Mac OS 10.4.11 I've been unable to get a driver that works for my Agfa Snapscan 1212u flatbed scanner. I've downloaded one for OSX from <http://static.agfa.com/digicamscanner_drivers/scanner/snapscan1212u/index.html> but when I try to open it get the message "the file is not a movie". Can anyone help? The scanner itself worked well until with an earlier OS.

    The message could be a result of you selecting the wrong file format when scanning or the drivers you downloaded are too old and incompatible with your Mac - even if you are running Tiger.
    I suggest you look at downloading and installing [VueScan|http://www.hamrick.com>. Your scanner is listed as a supported model and if you do ever update to Snow Leopard then this software will let you keep the scanner.
    One last point. This is the Snow Leopard (OS X 10.6) forum. You should have posted this question on the [Tiger (OS X 10.4)|http://discussions.apple.com/forum.jspa?forumID=756] forum.

  • "Type 3" error trying to install PCM-CIA/USB card

    Hello,
    I am in the USA, trying to sort out a PB G3 Wallstreet problem for my son in Kenya (Africa). He is a Peace Corps volunteer, and has been given the use of this old laptop for his work in the village of Oyugis.
    I have sent him a PCM-CIA to USB converter, so that he can use a small thumb drive to store things and transfer long email messages and other data to computers in the local post office.
    The USB converter came with a software CD, but when he tries to install it, it pops up with a "Type 3" error message.
    He would be so grateful if we could help him sort out this problem.
    PB G3 Wallstreet 4753   Mac OS 9.0.x  

    dmcly,
    A few points on running a USB PC card with OS 9.x:
    - A USB PC card does not supply the amount of bus power like computers with built-in USB ports. I doubt a USB thumbdrive will will work properly through a USB PC card.
    - There are USB PC cards that also come with a small power adapter that provides the necessary bus power. However, if he already has the PC card and thumbdrive, he can give it a try. USB PC cards do supply enough power to run a USB mouse, for example, but not enough to power a portable (2.5") USB HD.
    - If the Wallstreet has a standard install of 9.x, it will not have the necessary USB drivers to support the USB card. These can be custom installed from a MacOS 9.x CD or downloaded as an individual package. I would have your son look for these USB extensions in his Extensions Manager (Apple menu > Control Panels > Extensions Manager).
    USB Support
    USB Software Locator
    USB Device Extension
    USB Mass Storage Support
    USB Mass Storage Extension
    If they are present, make sure there are turned on by checking each box, then restarting.
    If they are missing, I would download this package from OWC; they have assembled different version numbers of the same USB class extensions that solve a problem Apple's version encounters.
    http://eshop.macsales.com/tech/ftp/usb/usbextensions.sit
    You will receive a 230K package named "usbextensions.sit". As Applellfreak stated, if you make no changes to the file on your PC, you can send it to a Mac. Once he drag-copies the file to Wallstreet's desktop and ejects the CD, he should be able to open it with the onboard Stuffit Expander. He can then highlight all five extensions and drag them on top of the System Folder...he will be prompted by the OS if he wants them installed in the Extensions folder...click OK. After restarting, he can try the USB PC card.
    - BEFORE restarting and inserting the USB PC card (or have him do it now), go to the Energy Saver control panel > Advanced Settings > uncheck 'allow processor cycling' for both Battery and Power Adapter. Failure to do so will cause a freeze with the USB PC card present.
    There is an alternative to a USB PC card that requires no drivers...a PC Card Adapter + the memory card of your choice. Go to the SanDisk website and click on "PC Card Adapters"; these adapters go in the PCMCIA card slot and will take various memory cards. Whether your son can use these memory cards in the local post office is another question but at least mentioning.
    http://www.esend.com/sandisk/

  • Error while interacting with scanner acrobat 9.0 and windows 7 and user profile

    After using Acrobat 9 for years I get a "Error while interacting with scanner". I have uninstalled and reinstalles the drivers for my Epson Expression 1600 scanner and still get the message. I did get it to work by changing to a differ window user account. Is there anyway correct the problem for the orginal user account.
    Thank you

    Using MSPaint works fine also,......................
    As for the question as to whether the update broke I can't honestly remember, I know it worked finr with an old HP scanner I had but as to the version of Acrobat at that time I don;'t recall
    Anyway getting fed up with this issue, I de-installed it, rebooted and re-installed.
    Ver 9.0.0 says the scanner driver is not installed or connected
    Ver 9.2.0 says the same.
    Ver 9.3.4 says error while interacting while interacting with scanner.........
    The scanner works with MSPaint, its own driver and application.
    What is wrong with this Adobe Acrobat Pro 9?

  • I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live were we only have dial-up and the Apple Store said this is what I need.

    I get the following error message when I connect a usb ethernet adapter to my new MacBook Pro: Unsupported - You cannot use an Apple USB Modem with this computer. I live where we only have dial-up and the Apple Store said this is what I need. In addition, when I connect the phone to the connecter it falls out, it will not click in.

    Why are you using a usb ethernet adaptor? Just plug the modem into the usb port.

  • Warning: Type created with compilation errors. sql : oracle 11gr2

    I'm trying to create a supertype customer service and subtype agent and supervisor, so they can inherent values however when I try to run this in oracle sql: a message comes up
    Warning: Type created with compilation errors.
    What is wrong with the code below?
    Create or replace type customer_s_type as object ( csID number, csName varchar(15), csType number ) NOT FINAL;  Create or replace type supervisor_type UNDER customer_s_type ( title varchar (10) );  Create or replace type agent_type UNDER customer_s_type (title varchar (10));  Create table supervisor of supervisor_type ( CONSTRAINT supervisor_PK PRIMARY KEY (csID));  Create table agent of agent_type (CONSTRAINT agent_PK PRIMARY KEY (csID));  create table customer_service( csID number(10), csType number(10), constraint supervisor_pk primary key(csID) );

    Wile creating TYPE you need to terminate with a back slash (/) semi colon does not work.
    Try like this
    create or replace type customer_s_type as object ( csid number, csname varchar(15), cstype number ) not final
    create or replace type supervisor_type under customer_s_type ( title varchar (10) )
    create or replace type agent_type under customer_s_type (title varchar (10))

  • Error an exception with the type CX_SY_CONVERSYION_NO NUMBER Occurred

    Hi all
    I am trying to execute a demand report,which is of normal complexity,means some selections,new formulas, 2 variables,around 10 characteristics/Key figures.
    But this query thrwoing this error.and just disconnects from Bw server. with all users(means who ever access).The error is smae for all users.
    Error the argumnet 10,00,000 cant be interpreted  as a number
    Error an exception with the type CX_SY_CONVERSYION_NO NUMBER Occurred
    And starngely this query works fine in Dev/Qa.No error at all.
    So i did the transport again 2 times from Qa -->Prod,but still the error remains the same in Prod.and just kicks out of system
    Any possible advice here appreciated.Many Thanks.
    Regds,
    Preethi.

    I had a request who works fine since one year and these last two days i have a CX_SY_EXPORT_NO_SHARED_MEMORY.
    I tried many things like rebuild indexes, reload stats oracle .. but these actions didn't solve my problem.
    I didn't want to modify parameter via RZ11 because this request was working fine before and the system is stable (no more user or more activity than the past)
    I solved the situation by a deletion of Olap cache.
    So:
    Try to delete the OLAP cache by the RSRCACHE and reload again yu request (but be care because yu will erased the cache for all Bex request..)
    Edited by: Frédéric PIERRON on Nov 3, 2010 5:59 PM

  • Error An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, bu

    Hi BW Guru's,
    I am getting the following error while executing BW report in BEx Analyzer:
    Error An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, but wa
    Error No space left in SHARED MEMORY
    Please help me to resolve the issue.

    I had a request who works fine since one year and these last two days i have a CX_SY_EXPORT_NO_SHARED_MEMORY.
    I tried many things like rebuild indexes, reload stats oracle .. but these actions didn't solve my problem.
    I didn't want to modify parameter via RZ11 because this request was working fine before and the system is stable (no more user or more activity than the past)
    I solved the situation by a deletion of Olap cache.
    So:
    Try to delete the OLAP cache by the RSRCACHE and reload again yu request (but be care because yu will erased the cache for all Bex request..)
    Edited by: Frédéric PIERRON on Nov 3, 2010 5:59 PM

  • Client Copy Error - ERROR: Type 'F' user exit with SYS_ERROR:

    Hello,
    We want to create a client copy from client 001 to clien 715.
    The client copy test runs successfully.
    The following error occurs in normal mode of client copy.
    1 ETA028XClient copy from "03.11.2010" "17:12:43"
    1 ETA029 System ID............................ "IS3"
    1 ETA043 Target client........................ "715"
    1 ETA030 R/3 Release.......................... "701"
    1 ETA354   Basis Support Package..............."SAPKB70107"
    1 ETA031 Host................................. "xxx"
    1 ETA000 Start in background............. ....." "
    1 ETA032 User................................. "SAP*"
    1 ETA033 Parameter
    1 ETA034 Source client........................ "001"
    1 ETA188 Source client user masters............"001"
    1 ETA185 Copier profile:......................."SAP_ALL"
    1 ETA036 Table selection
    1 ETA177 Customizing data ....................."X"
    1 ETA037 With application data................ "X"
    1 ETA155 Initialize and recreate......... "X"
    1 ETA294 Change documents are not copied
    2 ETA367XStart analysis of system "17:12:43"
    3 ETA108 "/GC1/CC_EXIT_CLIENT_DELETION" executed "        0"("        0") entries copied
    4 ETA114 Runtime "             0" seconds
    3 ETA072 Exit program "/GC1/CC_EXIT_CLIENT_DELETION" successfully executed "17:12:53"
    A2EE/SAPAPO/OM 012 "Mandant 715:" "Verbindung nicht oder fehlerhaft gepflegt:" "IS3CLNT001" " "
    2 ETA102 ERROR: Type 'F' user exit with SYS_ERROR: "/SAPAPO/OM_CLNT_COPY_DOWNLOAD"
    2 ETA534 "RCOD:" " 8" "SY-SUBRC:" " 0"
    2 ETA191 Program ended abnormally
    Can you help me?
    thx
    Torsten

    Torsten,
    Are you doing a local client copy in a SCM System. I can see it fails & is looking for SCM specific fn modules & user exits.
    If yes, has a look at this notes there are some steps that needs to be done for the transactional date:
    894490 - Client copy: Transactional data
    And re-post it in the SCM forum: SAP Advanced Planning & Optimization (SAP APO)
    - Regards, Dibya

  • Installing Agfa Duoscan T1200 scanner with latest OS X (10.4.8)

    Does anyone know if it is possible to install my Agfa Duoscan T1200 scanner in my G4 without causing much trouble?
    My G4 has a Ultra SCSI card installed. When I check the contents of my PCI Cards it says that I have ADPT,2930CU installed. I am assuming that is the Adaptec 2930 SCSI card.
    When I went to download the latest driver for the Duoscan at
    http://www.agfa.com/digicamscannerdrivers/index.html
    there is a section that says: "Not every scanner supported!" and it says that Mac OS X 10.3 does not support the Duoscan T1200. On that site I was able to download the driver, but I don't want to install it if it will cause problems.
    If I don't use FotoLook, but instead I use TWAIN from Photoshop 7.0.1, will it work?
    Was anyone successful at all with this, or should I buy another scanner? I hate to do that, as this scanner works very well.

    Yes, you may have to get SANE and install it. That worked fine for me.
    Vuescan is another way to go and there is a third program than will work.
    Google for scanning software for OS X.

  • Powerbook 1400 bus error (with extensions) error type 10 (without ext.)

    i have a powerbook 1400. bus error (with extensions) error type 10 (without extensions)
    no cd. floppy is dead
    the computer i put os 9 on it was a friend's 3400 witch is dead. i will see if i can get his hd.
    there are no pc cards in the slots and it has os9 so removing all the ram possable including the factory ram (i only have 16 mb noram in the expansion slot eather) it will not boot. (sad mac)
    the 1400 is my favorite computer
    I only have a dead pb 165 (no video only sad mac sounds) and a dell (i dont like pcs so i really need to get the 1400 working) and the dell has a very bad keyboard. it likes to repeat keys alot
    powerbook 1400cs/117   Mac OS 9.0.x   i want a newer mac

    macintosh lover
    It isn't what you believe that you need in the Mac so much as what its ROM tells the 1400 that it should have. Its software is integrated with what the Mac 'thinks' of itself as being, whether you use video mirroring, HDD spindown, persistent RAM Disk or any other feature that applies to PBs rather than to DTs. Why handicap the machine by omitting parts of its persona? It will be less stable, be given to unpredictable episodes of petit mal, and be downright unreliable as a result, especially if it also lacks the physical parts of its person that you mention. That is why it needs a System for its kind of PowerBook.
    Grant has outlined the best method of getting a handle on the PB, which will be much aided by its having a working HDD, a functional trackpad and so on.
    Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT     System 6.0.8 to OS 10.4.x

  • Trying to embed a video file in HTML5: ERROR=No video with supported format and MIME type found?

    Hello all!
    I am desparate for a solution. I am testing my site on Firefox and Explorer and still no sign of a functional video yet.
    Firefox: I get the error: No video with supported format and MIME type found.
    Explorer: I just get a distorted layout.
    Here is the code I am working on:
    <table id="Table_01" width="480" height="801" border="0" cellpadding="0" cellspacing="0">
        <tr>
            <td colspan="6">
                <img src="images/Video_01.jpg" width="480" height="114" alt=""></td>
        </tr>
        <tr>
            <td rowspan="3">
                <img src="images/Video_02.jpg" width="52" height="486" alt=""></td>
            <td colspan="4">
               <video controls width="376" height="221">
                 <source src="C:\Users\aalmeida\Videos\AEMC PEL 103 6 Channel, Power & Energy Logger - with Display (Part 1).mp4" type="Video/Mp4"/>
                 <source src="C:\Users\aalmeida\Videos\AEMC PEL 103 6 Channel, Power & Energy Logger - with Display (Part 1).webm" type="Video/WebM"/>
                 <source src="C:\Users\aalmeida\Videos\AEMC PEL 103 6 Channel, Power & Energy Logger - with Display (Part 1).oggtheora.ogv" type="Video/Ogg"/>
                 </video>
    Please tell me that there is something missing in the code. I have spent a lot of time uninstalling-updating Firefox plugins, added MIME types in the Internet Information Manager (I'm on Windows 7)
    and  seriuously hit a dead end with this!
    Any advice would be muchly appreciated!!!
    Thanks
    ~LA

    As Jon said, you must declare the page as HTML5.
    And your server may not be set up to deliver video as a binary file if it is an .OGG file. I have not seen this problem with .MP4 or .M4V in the past, but every server is a little different.
    To add a MIME type, you need to change your .htaccess file on an Apache server thusly:
    AddType audio/ogg .oga
    AddType video/ogg .ogv
    AddType application/ogg .ogg
    AddHandler application-ogg .ogg .ogv .oga
    Additionally, MIME types can usually be changed on a server's Control Panel. One can also ask one's hosting provider to do this as well.
    Firefox makes it necessary to use OGG files. Webkit-based browsers will deal with .M4V or .MP4 and I understand Internet Exploder will work with the latter two as well.

  • Is there any way to use agfa snapscan with os lion

    Is there any way to use an old agfa snapscan with os lion

    See my FAQ*:
    http://www.macmaps.com/macosxnative.html#SCANNER

  • Usb scanner with root permissions only

    Hello
    When I open xsane with regular a user, the scanner does not get detected by it. Only when I open xsane as root.
    That's probably a permission issue. My user is added to the scanner group.
    How would I correct this?
    Thanks

    brebs wrote:
    Write a udev rule to identify the scanner and give it the right user group & permissions. Google search is your friend
    Just to confuse the hell out of us, different distros use different group names. Some have "scanner", some use "usb", some don't even have "usb".
    Example:  In /etc/udev/rules.d/91-local.rules
    # Scanner.
    # sane-find-scanner ; scanimage -L
    # From http://forums.gentoo.org/viewtopic-p-33 … ml#3311185
    # udevadm info -a --name /dev/usbdev5.3_ep00
    # "libusb:003:015" probably means /dev/bus/usb/003/015
    SUBSYSTEM=="usb", ATTRS{product}=="CanoScan", GROUP="usb", MODE="0660", SYMLINK+="lide25"
    I googled it quite a bit to find out this process is rather difficult for newbies. I even read udev wiki but I can't come up with a rule myself. The gentoo forum post you referenced has udevinfo command while it has been replaced with udevadm and the script wouldn't work.
    Would you give me more directions?
    Here's the output of sane-find-scanner as root.
    [root@myhost ~]# sane-find-scanner
    found USB scanner (vendor=0x03f0 [HP], product=0x2504 [Deskjet F4200 series]) at libusb:001:004
    found USB scanner (vendor=0x050d [Belkin], product=0x705c [USB2.0 WLAN]) at libusb:001:003
    [root@myhost ~]# scanimage -L
    device `hpaio:/usb/Deskjet_F4200_series?serial=CN83I3Y197052D' is a Hewlett-Packard Deskjet_F4200_series all-in-one
    device `v4l:/dev/video0' is a Noname Kworld ATSC110/115 virtual device
    [root@myhost ~]#
    I understand the device would be 001:004, but how would I write a rule for it?
    Thanks

Maybe you are looking for

  • Multiclip questions in Final Cut Pro 6

    OK, so far I have did multiclip with HD QT movies. When I do it, it does not show them playing together in the canvas when set the sync option to open. It only shows the active angle, when I press pause it shows both angles. I have not experimented w

  • ABAP Proxy to JDBC : UPDATE_INSERT issue.

    Dear Friends    I am inserting one ekpo records to MS SQL server. my structure and records are below. <?xml version="1.0" encoding="UTF-8" ?> - <ns0:MT_EKPO_RECEIVE xmlns:ns0="http://gspcgas.net/asset_rfid"> - <StatementName>                - <dbTabl

  • How to resize the video in Compressor?

    Hi all, my first post here, I just know  we can't optionaly resize the video in Final Cut Pro and using the compressor can resovle this problem, It's not very convenient to resize the video in FCP. i wanna ask how can i  resize the video in compresso

  • Are there Major Impacts Migrating from Sybase 12.x to Oracle 10g, 9i, or 8i

    If anyone knows any websites on this subject or can help; I'd greatly appreciate it. Thanks

  • Problem with automatic downloads on multiple computers with shared storage

    I have a main Windows computer I use to rip my CD's, download Digital Copies from DVD's, buy iTunes movies, and sync my iPhone/iPad.  My iTunes library points to a shared location on a MediaSmart Windows Home Server as "\\mediasmart\itunes\music".  I