Error : Unable to find URL for Adapter Engine

Hi Experts,
I have searched several forums , but i am not clear on how to resolve this error.
I am using XI 3.0, my scenario is File->XI->File
I am getting this error in SXMB_MONI.
*Can any body suggest me a clear step-by-step procedure to solve it.*
   <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Message canceled
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
  <SAP:Category>XIServer</SAP:Category>
  <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
  <SAP:P1>af.xd2.host-dev</SAP:P1>
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xd2.host-dev</SAP:AdditionalText>
  <SAP:ApplicationFaultMessage namespace="" />
  <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xd2.hydrus-dev</SAP:Stack>
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
Thanks
sai

Hi Debashish,
Thanks for ur reply,
I have executed
--->Execute SAI_AE_DETAILS_GET from se37
>Enter AE name:<host>.<systemid>
After executing, i got these param
Exception       NO_ADAPTER_ENGINE_FOUND
Message ID:          SAI_GLOBAL                 Message number:           016
Message:
no_adapter_engine_found: Unable to find Adapter Engine host-DEV.XD2
Exchange profile parameters are like this
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section   = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value  =
and i dont have authorizations for SU01 fro lock/unlock.
Any suggestions how to proceed.
Thanks
Sai

Similar Messages

  • Reg Unable to find URL for Adapter Engine Error

    Hello,
    During execution of a scenario, i am getting these errors in sxmb_moni:
    AE_DETAILS_GET_ERROR
    3: Unable to find URL for Adapter Engine af.xip.poecspxioo4
    Error when reading the access data (URL, user, password) for the Adapter Engine.
    Seems like it is a problem of XI Server unable to locate the Central adapter engine due to some parameter not set properly.
    So, what are the points we can check while installation of XI so as to rectify this problem.

    Hi all,
    I got the similar error in my scenario and i solved the same.Actually i ma not pretty surte this will solve your problem.
    In my case proxy generation settings was mis configured in the sender system. so its caused the reason.
    I made an entry in the SPROXSET table and i did other activities like RFC and application system also.
    Then its worked for me. Its not matching with your case please do ignore this one
    Regards
    Vijay

  • No_messaging_url_found: Unable to find URL for Adapter Engine

    Hi,
    I am facing the same problem. I have configured a RFC-File scenario.
    I get the error"no_messaging_url_found: Unable to find URL for Adapter Engine af.<SID>.<server>"
    and <INTERNAL.AE_DETAILS_GET_ERROR>
    I get the error "no_messaging_url_found: Unable to find URL for Adapter Engine" when I execute the Function Module SAI_AE_DETAILS_GET.
    This error occured in the line 235( sap_xi_adapter_services = sld_accessor->associators( iref = sap_xi_adapter_framework assocclass = 'SAP_HostedXIAdapterServi) of the FM.
    The value is not filled and i get the error mentioned.
    I have gone through thread and verified all the points mentioned.
    I have checked SXI_CAHCE,there are no locked users in RSUSR200,
    SXI_CACHE, Goto->AdapterEngine Cache, I have an entry af.<sid>.<server>
    In SLD,Technical Landscape,Exchange Infrastructure I have the entry <SID>.<Server> against the Adapter Engine
    But as was mentioned in the thread the line 241 of the Fucntion Module has 'adapterType' and not 'Adaptertype' as in the exchange profile.I did not try changing 'a' to 'A'.
    Could you please let me know how to solve the problem.
    Thanks in advance.

    Hi Vani,
    Check the pipeline URL in the SLD
    Business System->URL
    It should be
    http://host:HTTPport/sap/xi/engine?type=entry
    Just check this thread- may be useful-
    File Adapter - Sender Problem
    RFC adapter - AE_DETAILS_GET_ERROR - no adapter engine
    https://websmp103.sap-ag.de/~sapdownload/011000358700002757652005E/HowtoMintorAF.pdf
    Hope this helps,
    Regards,
    Moorthy

  • Unable to find URL for Adapter Engine af.xid.xidev ?

    Hi,
    I have scenario.
    Abap proxy -
    > ccBPM -
    > RFC (synchronous).
    The error happen for ccBPM -
    > RFC
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>2: Unable to find URL for Adapter Engine af.xid.xidev</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Any idea for what happening ?
    Cheers
    Fernand

    Hi.
    Have you tried with this
    Re: Wrong Adapter Engine on RWB?
    Regards
    Seshagiri

  • Unable to find URL for Adapter Engine

    Hi,
    We have installed the XI 7.0 and I have realized a simple scenario "File > XI > File" in order to validate the installation... and on has a dump around Adapter Framework.
    Inside SXMB_MONI, on has the following error:
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.xid.bcnssap006</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.xid.bcnssap006</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.xid.bcnssap006</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    It's probably a problem with aii but which one ?

    Hi Mickael,
    The problem that you are facing looks like it is unable to connect to the adapter engine itself, please check the following:-
    The userid being used must have the authorizations of group SAP_XI_APPL_SERV_USER on the Integration Server.
    *During the configuration of the adapter (From Help documentation):-
    <i>Specifications for the Integration Engine
    Enter the complete address (URL) of the Integration Engine that you want to send the message to:
    XI.TargetURL=http://IntegrationEngineHost:port/pipeline-arguments
    This specification is mandatory.</i>
    One suggestion:- Please try the following and see if you are still facing the problem, this might help you in decreasing the number of places to verifyconfigurations!
    Again, from help:-
    <i>The Integration Engine address can also be accessed dynamically from the SAP System Landscape Directory (SLD). The following entry is added to the configuration for this purpose:
    XI.SLDConfiguration=SLDaccessor
    In this case the URL of the corresponding Integration Server for the system specified with XI.SenderService is read from the SLD and used instead of the value specified under XI.TargetURL. Therefore, specify the following:
    XI.TargetURL=<fromSLD>
    To be able to access the SLD, the SLDaccessor service must be configured correspondingly and the respective entries must be maintained in the SLD.</i>
    Hope this helps!
    -Sushumna

  • Power book not loading (error: unable to find driver for this platform) help me please

    power book not loading (error: unable to find driver for this platform) help

    That usually happens when trying to install Mac software intended for Intel-powered Macs (made in 2006 through present) on a PowerPC mac like teh powerbook (made before 2006).
    You post is a little cryptic, however. We may be of further help if you can tell us:
    <> the PowerBook's processor type (G3 or G4) and the Mac OS version, both available by doing "About the Mac" from your Apple menu.
    <> what program and its version your were trying to run and/or install.

  • Error: Unable to find class for bean

    Dear all,
    please help help with the problem
    i've a jsp as follows:
    <@page import="java.util.*, com.abc.*" %>
    <jsp:useBean id="mybean" class="MyClass" />
    <% out.println("Testing bean"); %>
    where MyClass.class is located WEB-INF/classes/com/abc/MyClass.class
    it works fine in Oracle iAS with oc4j 1.0.2.1.1 (not 9iAS R2)
    when i upgrade to 9iAS R2 with oc4j 9.0.3
    it's complaining the error of
    OracleJSP: oracle.jsp.parse.JspParseException: Line # 8, <jsp:useBean id="mybean" class="MyClass" />
    Error: Unable to find class for bean: mybean defined by tag with class: MyClass
    then i changed the line <jsp:useBean....> to
    <jsp:useBean id="mybean" class="com.abc.MyClass" />
    it didn't complain the error
    anyone know that the syntax of specifying class must be coded as package.xxx.xxx etc?
    Thank you very much

    You should specify the fully qualified class name (i.e. with package structure) in the class attribute of useBean tag.
    Read the syntax of useBean tag here
    http://java.sun.com/products/jsp/syntax/1.1/syntaxref1115.html
    Chandar

  • Error: Unable to find sources for current Linux Kernel

    Hi Guys,
    Hit a bump !!!!
    Oracle Linux x86-64 installed successfully via Oracle VM box.
    Clicked on 'Install Guest Additions'.
    Ran VboxLinuxAdditions.run to install the Guest machine on Linux. It Failed and in error log (/var/log/vboxinstall.log) got the below error:-
    Error: Unable to find sources for current Linux Kernel. Specify KERN_DIR=<directory> and run again
    Looking upto Google i found I need to update Linux headers , in doing so get +'bash: apt-get : command not found'+ which I am not able to understand.
    Any assistance is appreciated.
    Cheers

    Thanks for the information. I was able to resolve it though.
    Ran +'yum install gcc kernel-devel kernel-headers'+
    Hence my query is resolved now.
    Just one question - I need to copy text from Windows to Linux Terminal. Is there a command I can type into Linux terminal to enable copy paste from Windows to Linux and vice-versa ?
    Cheers.

  • Error in gettnig logon data for Adapter Engine

    Hi,
    We have Http > XI > RFC Scenario. We are getting 401 unauthorized error in "CALL ADAPTER" section. From the trace its clear that the logon data for the adapter engine (there is no value for USER in trace) is not getting poulated. We fixed this issue last evening....i think by doing full cache refresh, but this problem propped up again today. Yesterday when this issue was fixed the USER has "PIISUSER" in the trace.
    We haven't changed any config settings since yesterday so all the passwords and other config info is same. Not sure what's causing this issue. Below is the trace. Any help will be highly appreciated.
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
      <Trace level="3" type="T">Channel for adapter engine: RFC</Trace>
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
      <Trace level="2" type="T">return fresh values from cache</Trace>
      <Trace level="2" type="T">Get logon data for adapter engine (SAI_AE_DETAILS_GET): af.ppi.dac-sapd1</Trace>
      <Trace level="3" type="T">URL = http://dac-sapd1.actv2.com:8007/MessagingSystem/receive/AFW/XI</Trace>
      <Trace level="3" type="T">User =</Trace>
      <Trace level="3" type="T">Cached = X</Trace>
      <Trace level="3" type="T">Creating HTTP-client</Trace>
      <Trace level="3" type="T">HTTP-client: creation finished</Trace>
      <Trace level="3" type="T">Security: Basic authentication</Trace>
      <Trace level="3" type="T">Serializing message object...</Trace>
    <Trace level="3" type="System_Error">HTTP-client: error response= <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <title>Error Report</title> <style> td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="4" color="#666666"><b>  401 &nbsp Unauthorized</b></font></td> </tr> <tr bgcolor="#3F73A3"> <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td> <td height="23"><img width=1 height=1 border=0 alt=""></td> <td align="right" height="23"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SAP J2EE Engine/7.00 </b></font></td> </tr> <tr bgcolor="#9DCDFD"> <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td> </tr> </table> <br><br><br><br><br><br> <table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF"> <td align="left" colspan="2" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><b>  Authentication did not succeed.</b></font></td> </tr> <tr bgcolor="#FFFFFF"> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="2" color="#000000"><b>  Details:</b></font></td> <td align="left" valign="top" height="48"><font face="Arial, Verdana, Helvetica" size="3" color="#000000"><pre>  No details available</pre></font></td> </tr> </body> </html></Trace>
      <Trace level="3" type="T">HTTP-client: closing...</Trace>
      <Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
      <Trace level="3" type="T">HTTP-client: request sent</Trace>
      <Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
      <Trace level="3" type="T">HTTP-client: response received</Trace>
      <Trace level="3" type="T">HTTP-client: checking status code...</Trace>
      <Trace level="3" type="T">HTTP-client: status code = 401</Trace>

    Hi,
    go to the exchange profile.
    there u need to maintain the password for the XIISUSER.
    I think u need to restart the J2EE Engine for the changes to take effect.
    Regards
    Cornelius

  • In my Component monitoring i got this error for Adapter engine status.

    In my Component monitoring i got this error for Adapter engine status. Status is in red..
    Attempt to fetch cache data from Integration Directory failed; cache could not be updated
    [Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
    Please clarify ASAP..
    Thanks..

    HI,
    See below links you will get ..
    Process Integration (PI) & SOA Middleware
    ERR:Could not find SLD name for XI Application "DIRECTORY"
    Unable to find an associated SLD element
    Regards
    Chilla..

  • Error(2): Unable to find class for bean: connection defined by tag...

    I created a project, and a JavaBean that connects to the database and I want to use it in a JSP page that exists in my project.
    Bean:
    package BeerPackage;
    import java.sql.*;
    public class ConnectionBean
    JSP:
    <%@ page import="BeerPackage.*" contentType="text/html;charset=windows-1252"%>
    <jsp:useBean id="connection" class="ConnectionBean" scope="session"/>
    Then I get the error:
    Error(2): Unable to find class for bean: connection defined by tag with class: ConnectionBean
    When I try to build the JSP
    Any ideas?

    Seems even though I have an import, I still have to specify the package name in front of the useBean.
    What am I missing here?

  • I just updated my software, but seems my macbook got an error of unable to find driver for this platform..

    I just updated my software, but seems my macbook got an error of unable to find driver for this platform..

    Did you try more than once? If so:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

    Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

    Did you try more than once? If so:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • U401 touch windows 8 audio driver unable to install error could not find divice for this driver

    u401 touch windows 8  audio driver unable to 0wau05w8.exe install error could not find device for this driver
    kindly advise

    hi karthi2lenovo,
    Welcome to the Forums.
    If the conexant audio drivers from the lenovo website doesn't detect the device, can you try to:
    1. Open Device Manager (press Winkey+R > type devmgmt.msc)
    2. On the device manager, open Sound, video, and game controllers and Other Devices then check the status (if there's a yellow exclamation mark, error codes, etc.)
    3. As an alternative, try this conexant driver from station-drivers:
    Conexant High Definition Smart Audio
    Version 8.64.59.52 (Win8)
    Let me know your findings,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Error- Unable to find error text for this exception

    Hi all,
    I am facing the following problem in discoverer ,Please give me your advice.
    while I am trying to open the workbook I am getting the following error
    "Unable to find error text for this exception"
    Could you please tell me how I can find why this warning is come ? or how I can solve this warning.
    if I ignore this warning then the workbook is failing to open.
    thanks and regards
    senthil kumar

    Hi,
    Are you getting this problem with the Desktop, Plus or Viewer editions? It could be that the database is generating the exception. You will need to trace the database session to see the error.
    Rod West

Maybe you are looking for