Error: Unable to start Citadel 5 services

I am running LabVIEW v7.1 Developer Suite with DSC v7.1
Running Windows 2000
I am using LabVIEW to access data from an OPC server located in the PC running LabVIEW. I set up a vi to read the wanted data with no problems. Today, when I tried to open the saved vi I recieved this error message: "Unable to start Citadel 5 services". I have never recieved this error message before. As a result, I can not access the Tag Configuration Editor. Does anyone have any suggestions/comments that may help me? Thank you.
Tom

tidstein,
I'm sure you have tried rebooting your PC. If this did not solve the error try repairing the installation of the DSC Module from Add/Remove Programs in the Control Panel.
Citadel 5 is the database portion of the DSC module. It is dependent on several other components that should be installed/updated by the DSC Module installer. Another component that Citadel depends on is Microsoft's MSDE (http://www.microsoft.com/sql/msde/default.asp). This shows up as sqlservr.exe in the task manager (This component is automatically installed when you install the DSC Module). Citadel must be able to start this service in order to run.
Let me know if you were able to resolve this issue.
Regards,
-Nick F
Product Support Engineer
National Instruments
~~

Similar Messages

  • Error: Unable to start the services !!!!!!!

    After restarting the  Sww QA server  i am getting the below error message ,I am not able to start the services
    Below is the error :
    <u><b>ERROR:</b></u>
    The database
        DRIVER=SQL
    Server;SERVER=SWWSQLPRVSR1;UID=WindowsBGinfo;PWD-tricky;APP=BGInfo;WSID=FLMIRLET10373XP;DATABASE=WindowsBGinfo cannot be opened
    Please ensure the database exists and is accessible
    Regards,
    Mag.

    Hi,
    Following string
    PWD-tricky
    Should be:
    PWD=tricky
    Regards,
    Marcin

  • Error - Unable to start a service execution.

    Hi,
    iam splitting a dual stack system using SWPM tool. Iam getting the above error in the 3rd step - Adapt database to target Java Stack.
    The problem is, sapinst could not find the path, the error message also says - Unable to change to work directory /usr/java6_64/lib/ppc64/server. A file or directory in the path name does not exist.
    When i manually check in the host, the actual path is /usr/java6_64/JRE/lib/ppc64/server. The wrong path is saved in the parameter LIBPATH, how did SAPINST automatically took the wrong path? Is there a way to correct SAPINST's libpath?
    In one of the logs, i see:
    2014-06-25, 17:00:40:236:
    Removed JRE pathes from the environment. Before:
    LIBPATH=/usr/java6_64/lib/ppc64/server:/usr/java6_64/lib/ppc64:/oradata/software/SAP/tmp/sapinst_exe.36896856.1403708393:/sapmnt/EPQ/exe
    After:
    LIBPATH=/oradata/software/SAP/tmp/sapinst_exe.36896856.1403708393:/sapmnt/EPQ/exe
    Please help.
    Regards,
    Mohan.

    Hi,
    iam splitting a dual stack system using SWPM tool. Iam getting the above error in the 3rd step - Adapt database to target Java Stack.
    The problem is, sapinst could not find the path, the error message also says - Unable to change to work directory /usr/java6_64/lib/ppc64/server. A file or directory in the path name does not exist.
    When i manually check in the host, the actual path is /usr/java6_64/JRE/lib/ppc64/server. The wrong path is saved in the parameter LIBPATH, how did SAPINST automatically took the wrong path? Is there a way to correct SAPINST's libpath?
    In one of the logs, i see:
    2014-06-25, 17:00:40:236:
    Removed JRE pathes from the environment. Before:
    LIBPATH=/usr/java6_64/lib/ppc64/server:/usr/java6_64/lib/ppc64:/oradata/software/SAP/tmp/sapinst_exe.36896856.1403708393:/sapmnt/EPQ/exe
    After:
    LIBPATH=/oradata/software/SAP/tmp/sapinst_exe.36896856.1403708393:/sapmnt/EPQ/exe
    Please help.
    Regards,
    Mohan.

  • I get this message when i start the computer :" error : unable to start the bluetooth stack service"

    i get this message when i start the computer :" error : unable to start the bluetooth stack service"

    If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
    Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
    In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
    Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
    If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
    The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it.

  • BTTray Error: Unable to start the Bluetooth Stack Service

    I have a HP TouchSmart 610-1190f operating system Windows 7 64-bit
    I installed Norton 360 back in January and ran the registry program which corrupted the Bluetooth.
    BTTray Error:  Unable to start the Bluetooth Stack Service.  I know that a system restore will take care of it, but when it happened I did not know that and I also did not know that I can't go back in time like Windows XP.  I've tried reinstalling the driver with no luck.  Is my only option a System Recovery?

    Product Name: HP H8-1160t
    Product Number: QC45AV#ABA
    I spent over 3 hours with HP chat and in typical fashion they could not solve the problem and requested I restore to original OS. I refused. HP Support needs to figure out a way to RESOLVE a customer problem without first jumping to "please restore your system".
    After a second call to HP, they sent me a replacement Wireless Card, and much to my surprise the Hardware Tech showed up as scheduled on a SATURDAY no less; even after being told by HP that no weekend calls are made.
    Anyway, the very nice service tech installed the new part and ...drum roll....wait for it...Voila!!!!
    NO FIX!!  As expected.  Why Did HP Software Support think the new card would fix the issue?? HP Software Support is virtually USELESS, actually, lets just say without any equivocation at all: HP SOFTWARE Support is USELESS; HARDWARE SUPPORT IS FANTASTIC...
    OK. I FIXED the problem myself:
    I downloaded the Broadcom fix:
    sp56715.exe
    Available from:
    ftp://ftp.hp.com/pub/softpaq/sp56501-57000/ sp56715.exe   (eliminate the spaces...HP forum would not let me load this VALID site.
    I am NOT POSITIVE THAT DOWNLOAD IS FOR YOUR VERSION, BE CERTAIN TO CHECK SYSTEM REQUIREMENTS.
    Rebooted, Bluetooth service started up, NO BTTray Stack Error, discovered my device (old LG Cell Phone), connected, and I was able to access the MY Music, Pictures, Video files finally.
    Trust me, HP Software Support is a waste of time.

  • Unable to start ifs service after database is restarted

    Hi All,
    I am getting this weird problem with iFS. I have web application where I connect to iFS to read some of the documents. The problem is when the database is stopped and started with App server still running (ifs is also up and running)... I am getting the following error message.
    Any help will be greatly appreciated. I have also attached the java class which I am using to get connection...
    oracle.ifs.common.IfsException: IFS-21008: Unable to connect to iFS service
    oracle.ifs.common.IfsException: IFS-11013: Unable to start inter-service event exchanger
    java.sql.SQLException: No more data to read from socket
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
         at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
         at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:857)
         at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:731)
         at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:690)
         at oracle.jdbc.ttc7.Oopen.receive(Oopen.java:103)
         at oracle.jdbc.ttc7.TTC7Protocol.open(TTC7Protocol.java:466)
         at oracle.jdbc.driver.OracleStatement.<init>(OracleStatement.java:413)
         at oracle.jdbc.driver.OracleConnection.privateCreateStatement(OracleConnection.java:470)
         at oracle.jdbc.driver.OracleConnection.createStatement(OracleConnection.java:379)
         at oracle.ifs.server.S_LibraryServiceRdbmsEventExchanger.start(S_LibraryServiceRdbmsEventExchanger.java:243)
         at oracle.ifs.server.S_LibraryService.addSession(S_LibraryService.java:2695)
         at oracle.ifs.server.S_LibrarySession.<init>(S_LibrarySession.java:1961)
         at java.lang.reflect.Constructor.newInstance(Native Method)
         at oracle.ifs.server.S_LibraryService.constructSession(S_LibraryService.java:2566)
         at oracle.ifs.server.S_LibraryService.connect(S_LibraryService.java:2359)
         at oracle.ifs.beans.LibraryService.connect(LibraryService.java:977)
         at com.comp.test.utils.iFSSession.getIfsConnection(iFSSession.java:73)
         at com.comp.test.controller.ReportRequestAction.processRequest(ReportRequestAction.java:95)
         at com.comp.test.controller.ReportRequestAction.execute(ReportRequestAction.java:64)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    --java code
              if(!LibraryService.isServiceStarted(serviceName)) {
              service = LibraryService.startService(serviceName,servicepasswd);
              } else {
              service = LibraryService.findService(serviceName);
                   //CredentialManager to authenticate a user
              CleartextCredential cred = new CleartextCredential(name, password);
              ConnectOptions connectOpt = new ConnectOptions();
                   //Sets and gets the Locale of the new session.
              connectOpt.setLocale(Locale.getDefault());
                   //Connects to iFS, establishing a new LibrarySession
              ifsSession = service.connect(cred, connectOpt);
                   //Set the administrator mode state for this session
                   ifsSession.setAdministrationMode(true);
                   return ifsSession;

    I am using the following class to get ifs session from IfsHttpLogin
    public class TestIfsSession implements IfsHttpLogin {
    * The <code>LibrarySession</code>.
    private LibrarySession m_session;
    * The <code>FolderPathResolver</code>.
    private FolderPathResolver m_resolver;
    * Default constructor required by the jsp spec for the USEBEAN tag
    * @exception IfsException
    public TestIfsSession() throws IfsException {
    public void init(LibrarySession libSession)
         this.m_session = libSession;
    * Return the login's session object.
    * @return The <code>LibrarySession</code> object.
    public LibrarySession getSession() {
    return m_session;
    * Return the login's path resolver.
    * @return The <code>FolderPathResolver</code> object.
    public FolderPathResolver getResolver() {
    return m_resolver;
    * Called when this object is bound to the HTTP session object.
    * @param event
    * The event when the object is bound to the Http session.
    public void valueBound(HttpSessionBindingEvent event) {
    // do nothing
    m_category.debug("value bound : ");
    * Called when this object is unbound from the HTTP session object.
    * @param event
    * The event when the object is unbound to the Http session.
    public void valueUnbound(HttpSessionBindingEvent event) {
    m_resolver = null;
    try {
    if (m_session != null) {
    m_category.debug("removing connection: valueUnbound " + m_session);
    m_session.disconnect();
    } catch (IfsException e) {
    e.printStackTrace();
    } finally {
    m_session = null; // release the resources
    System.gc();

  • FTP error: Unable to start a standalone server

    Hello,
    I've installed PureFTP Manager, but the following error messages appear when I use different ftp clients:
    [Error] Unable to start a standalone server: [Address already in use]
    Error: the server dropped the connection (it may be too busy).
    I've found a similar problem posted to a number of forums (using different ftp server software) and the explanation seems to be that another program is tying up the port. The solution is to find out which program and disable it. However, this involves using the Terminal and commands, which puts me in deep water.
    Could someone please offer a solution?
    I have the Mac and a PC connected to the modem/router.
    I have a static IP address. LAN IP on the Mac: 10.1.1.2 which I'm entering to test.
    I have FTP access disabled in the Mac OS firewall settings.
    FTP access is not blocked by service filtering in the modem/router's firewall settings.
    I've set up port-forwading:
    Private IP: 10.1.1.2
    Protocal: TCP
    Port Start: 21
    Port End: 21
    Port Map: 21
    However, these saved settings disappear the next time I log in to the router's set up window.
    G4 DP 867 MHZ   Mac OS X (10.2.x)   Max OS X (10.2.8)

    Hello again gordon6010,
    What I was intending to convey is that the message you see on your display is a printer software related error. By removing and reinstalling the drivers you may be able to correct the .dll error.
    In regards to the beginning of the error message "Unable to Start a DCOM Server",  I recommend this document on how to Enable or Disable DCOM. This should help if the DCOM is disabled on your desktop. For further assistance, I will need to ask you a few questions:
    What is the Product and Model Number of your desktop computer?
    What version of Windows do you have installed on your computer?
    Has your computer completed all of its important Windows Updates?
    Have you updated your HP drivers using the HP Support Assistant?
    Are you trying to install a printer on your network or specifically on your computer?
    As an aside, there is no higher level technician as this is a free peer-to-peer forum of support. Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Unity Service - Error: Unable to communicate with service control center

    Hi Guys,
    I have a CUC Cluster of 2 nodes at 9.1.2  I did a Cobra restore and since the cobra I have an issue when I go to Unity Connection Servicability and then
    If I go in service Management I have this error :  " Error: Unable to communicate with service control center  "
    I am not the only one who got that Issue.. the documentation is not so clean from cisco..
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/110587-cuc-credential-error.html#Controlcenter
    Here is what I did and the result
    admin:run cuc dbquery unitydirdb select alias, displayname, objectid  from vw_user where alias ='adminunity'
    alias       displayname  objectid
    adminunity  adminunity   2774a94d-052d-49e9-9288-bf447a4b1532
    admin : run cuc dbquery unitydirdb select objectid, userobjectid, credentialtype, encryptiontype from tbl_credential where userobjectid = "2774a94d-052d-49e9-9288-bf447a4b1532"
    objectid                              userobjectid                          credentialtype        encryptiontype
    1255f7f7-5d15-4406-ab54-df5f248e30bf  2774a94d-052d-49e9-9288-bf447a4b1532  3               3
    5ace4b8f-dbeb-4e46-8d7c-146b13db5499  2774a94d-052d-49e9-9288-bf447a4b1532  4               3
    admin : run cuc dbquery unitydirdb update tbl_credential set encryptiontype = "3" where objectid ="1255f7f7-5d15-4406-ab54-df5f248e30bf"
    admin run cuc dbquery unitydirdb update tbl_credential set encryptiontype = "3" where objectid ="5ace4b8f-dbeb-4e46-8d7c-146b13db5499"
    admin:run cuc dbquery unitydirdb select objectid, userobjectid, credentialtype, encryptiontype from tbl_credential where userobjectid = "2774a94d-052d-49e9-9288-bf447a4b1532"
    objectid                              userobjectid                          credentialtype  encryptiontype
    1255f7f7-5d15-4406-ab54-df5f248e30bf  2774a94d-052d-49e9-9288-bf447a4b1532  3               3
    5ace4b8f-dbeb-4e46-8d7c-146b13db5499  2774a94d-052d-49e9-9288-bf447a4b1532  4               3
    but once I did that, I wasn't able to login anymore with my user, so I put it back to 4.
    anyone ?

    I make the right configuration of my network (eth0 and eth1) and I reboot my server the start CRS service automaticaly...
    The problem is that my server don't stop rebooting automaticaly!!!
    In /var/log messages I have this " oracle CSSD failure. Rebooting for cluster integrity" !!!
    some one can help?

  • [SOLVED] Network Configuration -- unable to start a service file

    I am following this wiki page (Using Static IP address step) and created /etc/systemd/system/network.service as instructed
    [Unit]
    Description=Connect to the other pc
    Wants=network.target
    Before=network.target
    BindsTo=sys-subsystem-net-devices-lan.device
    After=sys-subsystem-net-devices-lan.device
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    EnvironmentFile=/etc/conf.d/network
    ExecStart=/sbin/ip link set dev lan up
    ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
    ExecStart=/sbin/ip route add default via 192.168.1.1
    ExecStop=/sbin/ip addr flush dev lan
    ExecStop=/sbin/ip link set dev lan down
    [Install]
    WantedBy=multi-user.target
    But I am unable to start network.service
    $ sudo systemctl start network
    Job for network.service failed. See 'systemctl status network.service' and 'journalctl -xn' for details.
    $ systemctl status network.service
    network.service - Connect to voice
    Loaded: loaded (/etc/systemd/system/network.service; enabled)
    Active: failed (Result: resources)
    $ sudo journalctl -xn
    -- Logs begin at Sat 2013-03-30 03:48:02 AMT, end at Thu 2013-04-04 18:17:46 AMT. --
    Apr 04 18:17:26 work sudo[24774]: pam_unix(sudo:session): session closed for user root
    Apr 04 18:17:44 work sudo[25354]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/systemctl start network
    Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session opened for user root by void(uid=0)
    Apr 04 18:17:44 work systemd[1]: Starting Connect to the other pc...
    -- Subject: Unit network.service has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/7d4958e842da4a758f6c1cdc7b36dcc5
    -- Unit network.service has begun starting up.
    Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
    Apr 04 18:17:44 work systemd[1]: network.service failed to run 'start' task: No such file or directory
    Apr 04 18:17:44 work systemd[1]: Failed to start Connect to the other pc.
    -- Subject: Unit network.service has failed
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Documentation: http://www.freedesktop.org/wiki/Software/systemd/catalog/be02cf6855d2428ba40df7e9d022f03d
    -- Unit network.service has failed.
    -- The result is failed.
    Apr 04 18:17:44 work sudo[25354]: pam_unix(sudo:session): session closed for user root
    Apr 04 18:17:46 work sudo[25421]: void : TTY=pts/0 ; PWD=/etc/systemd/system ; USER=root ; COMMAND=/usr/bin/journalctl -xn
    Apr 04 18:17:46 work sudo[25421]: pam_unix(sudo:session): session opened for user root by void(uid=0)
    Additional info:
    I have connected 2 PCs with LAN (Ethernet) cable and want configure them for exchanging files. Both running Arch Linux. I am following the Network Configuration wiki page from the beginning. Didn't have luck with DHCP/dynamic IP, so trying Static IP this time. Restarting the pc with network.service enabled results in same error (in systemctl --failed). Same error message on both PCs.
    Trying to run ExecStart lines one by one:
    $ sudo /sbin/ip link set dev lan up
    $ sudo /sbin/ip addr add 192.168.1.2/24 dev lan
    RTNETLINK answers: File exists
    $ sudo /sbin/ip route add default via 192.168.1.1
    RTNETLINK answers: File exists
    Does this mean there already is IP address and route assigned? If so, how to find out which service has done that? Do I need to remove it? Am I following the right wiki page (didn't find another)?
    What am I doing wrong and how can I correct this error? / Point me in right direction.
    Last edited by axper (2013-04-04 19:26:17)

    henk wrote:
    EnvironmentFile=/etc/conf.d/network
    Apr 04 18:17:44 work systemd[1]: Failed to load environment files: No such file or directory
    have you checked if the network file exists?
    Oh thanks, that line was causing problems! Now I do have network.service(s) running on both PC's with this content:
    [Unit]
    Description=Connect to my desktop/laptop
    Wants=network.target
    Before=network.target
    BindsTo=sys-subsystem-net-devices-lan.device
    After=sys-subsystem-net-devices-lan.device
    [Service]
    Type=oneshot
    RemainAfterExit=yes
    ExecStart=/sbin/ip link set dev lan up
    ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan
    ExecStart=/sbin/ip route add default via 192.168.1.1
    ExecStop=/sbin/ip addr flush dev lan
    ExecStop=/sbin/ip link set dev lan down
    [Install]
    WantedBy=multi-user.target
    I don't get any errors, and this is network's status (on both PCs) when cable is connected
    $ sudo systemctl restart network
    $ systemctl status network
    network.service - Connect to my desktop
    Loaded: loaded (/etc/systemd/system/network.service; disabled)
    Active: active (exited) since Thu 2013-04-04 22:43:22 AMT; 8s ago
    Process: 9761 ExecStop=/sbin/ip link set dev lan down (code=exited, status=0/SUCCESS)
    Process: 9757 ExecStop=/sbin/ip addr flush dev lan (code=exited, status=0/SUCCESS)
    Process: 9768 ExecStart=/sbin/ip route add default via 192.168.1.1 (code=exited, status=0/SUCCESS)
    Process: 9766 ExecStart=/sbin/ip addr add 192.168.1.2/24 dev lan (code=exited, status=0/SUCCESS)
    Process: 9764 ExecStart=/sbin/ip link set dev lan up (code=exited, status=0/SUCCESS)
    And here wiki page is no more help. How can I test connection?
    I try to ping, and it works on both machines (if it's the right thing to test?)
    $ ping -c3 192.168.1.2
    PING 192.168.1.2 (192.168.1.2) 56(84) bytes of data.
    64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.039 ms
    64 bytes from 192.168.1.2: icmp_seq=2 ttl=64 time=0.050 ms
    64 bytes from 192.168.1.2: icmp_seq=3 ttl=64 time=0.060 ms
    --- 192.168.1.2 ping statistics ---
    3 packets transmitted, 3 received, 0% packet loss, time 1998ms
    rtt min/avg/max/mdev = 0.039/0.049/0.060/0.011 ms
    Now I need to figure out how to share files. Thanks all.
    Last edited by axper (2013-04-04 19:04:43)

  • Unable to start a service execution

    While uninstalling NW7.02 i came across with an error (while selecting continue with run a new option) of
    unable to start a service execution.
    Please check the following information for the possible reason and inform the installation development.

    Hi Vidushi,
    Remove all the sapinst exe file and sapinst_dir.
    kill all the process of sapinst.
    set the new TEMP variable and start the sapinst.
    With Regards
    Ashutosh Chaturvedi

  • Unable to start presentation services , in OBIEE 11g

    Hi ,
    Unable to start presentation services , in OBIEE 11g :
    [2013-01-18T13:38:49.000+05:30] [OBIPS] [INCIDENT_ERROR:1] [] [saw.webextensionbase.init] [ecid: ] [tid: ] Invalid item /system/mktgcache/01HW447397/sawguidstate.[[
    File:catalogimpl.cpp
    Line:660
    Location:
         saw.webextensionbase.init
         saw.sawserver
         saw.sawserver.initializesawserver
         saw.sawserver

    Follow the steps below:
    1.Shutdown all OBIEE services.
    2.Replace the files sawguidstate and sawguidstate.atrin the location:
    <Instance_Home>\instances\<instance_name>\bifoundation\OracleBIPresentationServicesComponent\coreapplication_obips1\catalog\<project>\root\system\mktgcache\<name>
    with the same files from a backup or from another working instance.
    3.Restart all OBIEE services.

  • ERROR"Unable to convert sender service to an ALE logical system,(Urgent)

    Hi All when i am not giving the sender service address in the Receiver Aggrement i am getting this perticular error .
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
      <SAP:P1>Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error: Transaction IDX1: Port SAPRP1, client , RFC destination contain errors</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    ==========================================
    And if i am giving this one then i am not getting any such error rather i am getting another error "Unable to convert sender service to an ALE logical system" for this also i have checked the LS system name in the Adapter specific Identifier and the logical name are exactly same. But still i am getting this error
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIAdapter</SAP:Category>
      <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Unable to convert sender service to an ALE logical system</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    =============================================
    Still i am getting this error can anyone please let me know what to do now..??
    Please treat this as urgent

    Hi,
    This error is caused when Sender System name does not match the logical system name of partner. As you mentioned you have done all the steps to ensure that, here's a checklist that could be helpful:
    1. Check adapter specific parameters for sender system.
    2. Maintain header mapping in receiver agreement and ensure that sender service name provided is same as business partner name required in R3 and business partner type is LS.
    3. This may sound very basic, but ensure that checkbox for 'Apply control record from payload' is not checked and if it is then the values passed through payload are appropriate.
    Hope this would be helpful.
    Thanks,
    Bhavish

  • Error-Unable to start debugging.

    Visual Studio 2013 showing an error while trying to Run.
    ' Unable to start debugging.
    0x80040154
    How to solve this issue?
    Thanks,
    Arjun

    Hi Arjun,
    Based on the error message, it is hard for us to find the real reason for this issue directly.
    Could you get any other error messages if you build your project? Please check the detailed error or warning messages in Error list window or the output window.
    The reason why I suggest you run it with "start without debugging" is that if it still has certain issues without debugging, it means that it is not the debugging issue.
    Maybe you could view the Event log to get more information.
    Could you share us the detailed steps about how you debug your project?
    >> Unable to start debugging.0x80040154
    A report about the simliar error message:
    https://connect.microsoft.com/VisualStudio/feedback/details/786897/update-2-unable-to-debug-0x80040154
    I got the issue with the error "Unable to Start Debugging on the Web Server" before.
    Reference:
    https://msdn.microsoft.com/en-us/library/vstudio/dwesw3ee(v=vs.120).aspx
    https://technet.microsoft.com/zh-cn/subscriptions/dwesw3ee(v=vs.71).aspx
    If still no help, maybe you could share us a simple sample, so we could debug it in our side.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • ERROR" unable to convert the service as an ALE logical system"

    Hello All,
    In SOAP to IDOC scenario I tested the webservice with the client tool. Its hitting the integration engine but its throwing up an error" unable to convert the service as an ALE logical system". How can I maintain a logical system for a service as its outside our landscape. Can any one let me know how to proceed with this.
    Looking forward to expert comments.
    Thanks and regards,
    Neelima

    Hi,
    Check this blog by Michal.
    /people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
    Regards,
    Sudheer.

  • Can't open Lightroom.  Keep getting application error - unable to start correctly (0xc000007b).

    Keep getting application error - unable to start correctly (0xc000007b).  Have uninstalled and reinstalled twice with no change.

    ...07b Problems http://forums.adobe.com/thread/1355374?tstart=0

Maybe you are looking for

  • Bridge CS6 won't open in Windows 8 PC

    First time trying to open Bridge from Photoshop it says "Waiting on Bridge CS6...If i try to launch Bridge alone nothing happens. I had Photoshop 2 installed on my PC when I installed the new CS6 suite. I've heard this may be an issue. Most searches

  • Upgrade path in the future for 10bit monitor(s).

    I'm looking HW for my new PC and thats not the problem. Would like get a Quadro graphics card because i'm also updating the monitor later (HP ZR30w).But  GTX-680 has much moregpu power  for the same money. So my question is. When i get the new monito

  • What does ip fragment reassembly do

    hi can someone pls tell me what is the meaning of ip reassembly mode in the global configuration where it gives a option for operating system. i mean what does this option actually do. can someone pls guide me. regards sebastan

  • Image Processor : error 325

    Hello, I am trying to make an image processor but a dialog box appears with the following error code 325 What is it and what can I do to make my image processor. Thank you in advance

  • About Date Range Selection in Contributor Recognition Program- List

    Hello SCN, Happy that we have a classified date range selection like Year wise, Contest period wise and also with date range in the Top Contributors list. However earlier we had a luxury to see the point classified as  "All Time Contribution".  I per