Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)
What can I do?

Run the cleaner tool and install from scratch.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Mylenium

Similar Messages

I have a Mac with photoshop CS6 regularly updated. I am unable to read RAW images CANON Power shot G16 /ADOBE LISTING WAS of NO HELP

Is there any one who could let me know how to read Raw images Canon power shot g16? I tried all I could and followed the suggestions given by ADOBE but noting works. I see the images with other program but I cannot work on them.

Check your version of Camera Raw installed: Help (Win)/Photoshop (Mac) > About Plug-in > Camera Raw.
If it is less than 8.2, it won't work with this camera.
If it is less than 8.6, you don't have all the updates installed.

"Error: Final Cut Pro was unable to read the movie file just captured"

Hello everyone!
We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
We reinstalled the Final Cut Pro software all over again thinking that maybe the software got corrupted and we also rectified any disk permissions for the hard drives.
Any ideas?
Thanks
Efrain
G 5 Mac OS X (10.4.8)

We had a computer crash while we were working on Final Cut Pro and backing up some media to a hard drive.< </div>
You eventually want to figure out how that happened and make sure you fix it.
Since then, whenever we "capture' video footage and hit the escape key to stop capturing - we get -
"Error: Final Cut Pro was unable to read the movie file just captured"
<
You reformatted the external drive, yes? You might not have used the correct initialization setting. Should be Macintosh HFS, journalling is optional. Or you have a drive formatted for Winderz.
Aside from incorrect drive formatting, we have seen this error if the capture is incomplete or improperly terminated.
It's not an FCP issue, it's hardware.
bogiesan

I am having trouble dating to version 3.6.14. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

I am having trouble dating to version 3.6.14 or updating to the Beta testing. I am running Linux/Ubutu OS and I get this error message:/tmp/p7x3vko2.part could not be saved, because the source file could not be read. Please help. Thank you , Deb

Solved for me.
I set the owner/permissions of my profile's mozilla folder's (and all the files in it) to read/write access, and the problem disappeared.
in linux:''
* cd /home/myusername/.mozilla
* chown -cR myusername:mygroup ./
* chmod -cR +rw ./
'''Never do that with root privs (nor with sudo)'''

Excel unable to read WEBI schedule download excel file

Hi experts,
We use BO central management's instance manager to schedule download a report as excel format in our ftp share folder.
And the download did run successfully and an icon of the file been shown as excel format in ftp folder.
while we use excel 2007 to open the file, excel pop out the message of unable to read the file.
it is saying the excel found unreadbale content in report. Do you want to recover the contens of this workbook? if you trust the source of this workbook, click yes. after applied the yes, excel stil pop out the message of unable to read the file.
the general tab in excel been uncheck the "ignore other applications that use Dynamic Data Exchange (DDE), but result still shown unable to read.
The whole set of report can be run in WEBI and using save report to my computer as excel without any issues.
WEBI been setup as refresh on open.
Any clues?

Hi,
Did you create a PivotTable report in the file? As your description, the HTML format could be used correctly in Excel 2007. Did you get the other error message?
Such as,Unable to read file.
When you click OK, you receive the following error message:
Errors were detected in '<var>filename</var>.xls', but Microsoft Excel was able to open the file by making the repairs listed below. Save the file to make these repairs permanent.
PivotTable report '<var>report_name</var>' on '[<var>filename</var>.xls]worksheet_name' was discarded due to integrity problems.
Please try to use the workaround:
Turn off AutoRecovery when you work with any workbooks.Click Excel button>Excel options>Save>Uncheck AutoRecovery
Following this, if the issue exists, I recommend you fix the issue the following KB：
http://support.microsoft.com/kb/943088
http://support.microsoft.com/kb/929766
Regards,
George Zhao
TechNet Community Support

ORA-27047: unable to read the header block of file

My Windows 2003 crashed which was running Oracle XE.
I installed Oracle XE on Windows XP on another machine.
I coped my D:\oracle\XE10g\oradata folder of Win2003 to the same location in WinXP machine.
When I start the database in WinXP using SQLPLUS i get the following message
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 62918580 bytes
Database Buffers 79691776 bytes
Redo Buffers 2904064 bytes
ORA-00205: error in identifying control file, check alert log for more info
I my D:\oracle\XE10g\app\oracle\admin\XE\bdump\alert_xe I found following errors
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Apr 25 18:38:36 2007
ALTER DATABASE MOUNT
Wed Apr 25 18:38:36 2007
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Wed Apr 25 18:38:36 2007
ORA-205 signalled during: ALTER DATABASE MOUNT...
ORA-00202: control file: 'D:\ORACLE\XE10G\ORADATA\XE\CONTROL.DBF'
ORA-27047: unable to read the header block of file
OSD-04001: invalid logical block size (OS 2800189884)
Please help.
Regards,
Zulqarnain

Try to install win 2003 server software, do the fresh installation of oracle software, now copy the datafiles and controlfiles to same locations as you did on winxp.
get back to us, if still not out of the woods. I still doubt that a simple restore would do the trick, since you doing it across different platforms, might be I can be wrong, but this is what I personally feel, you not able to start the database on winxp.
hare krishna
Alok

Using Adobe Reader, I cannot open any adobe documents, Message indicates missing plug-ins. Please help... Thank you

Successfully downloaded Reader on to my PC (Windows 7 Home Premium 64 bit). However, I cannot open any adobe documents, Message indicates missing plug-ins. Please help... Thank you,
Theyankfan

Hey Joseph Curcio,
You might be viewing the PDFs in your browser only where Adobe Reader plug-in is disabled.
Please try opening the PDF file using Adobe Reader and then check.
Let me know in which browser are you trying to view the PDFs so that I can help you out enabling the required plug-ins.
Regards,
Anubha

Error updating InCopy - error message U44M1P7

The update downloads, but fails to install. The advice "Try again", fails too time after time.

Hi Rob,
Please check both the links as they will explain and solve the problem
U44M1P7 - Updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-ccm.html
If you have a MAC OS, please refer to this link:
U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manage r-update.html
Thanks!
Ankit

IDCS file wont open with CS2. says "plug-ins arent updated?!"

so, i recently installed CS2 on my computer, and when i try to open a particular file that was made with CS, i get an error message that says:
"the document uses one or more plug-ins which are not currently available on your system. do you want to open anyway?"
it also lists:
LILO.indesignPlugin
CellStyles.rpln.indesignplugin
if i say yes, open anyway, it says it cant. and it doesnt.
booooo.
how can i fix this?
-a

It was probably created in CS3. One of the features used in CS3 is cell styles (surprise!)
Have the person who created the file export an INX (InDesign Interchange file). You can open it if you have the latest version of CS2. (However, the cell styles won't be cell styles anymore.)

Problem in reading data from serial port continuously- application hangs after sometimes

I need to read data from two COM port and order of data appearance from COM port is not fixed.
I have used small timeout and reading data in while loop continously . If my application is steady for sometime it gets hangs and afterwards it doesnt receive any data again.
Then I need to restart my application again to make it work.
I am attaching VI. Let me know any issue.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet
Attachments:
Scanning.vi ‏39 KB

billko wrote:
Ranjeet_Singh wrote:
I need to read data from two COM port and order of data appearance from COM port is not fixed.
I have used small timeout and reading data in while loop continously . If my application is steady for sometime it gets hangs and afterwards it doesnt receive any data again.
Then I need to restart my application again to make it work.
I am attaching VI. Let me know any issue.
What do you mean, "not fixed?" If there is no termination character, no start/stop character(s) or even a consistent data length, then how can you really be sure when the data starts and stops?
I probably misunderstood you though. Assuming the last case is not ture - there is a certain length to the data - then you should use the bytes at port, like in the otherwise disastrous serial port read example. In this case, it's NOT disastrous. You have to make sure that you read all the data that came through. Right now you have no idea how much data you just read. Also, if this is streaming data, you might want to break it out into a producer/consumer design pattern.
Not fixed means order is not fixed, data from any com port can come anytime. lenght is fixed, one com port have 14 byte and other 8 byte fixed..
Reading data is not an issue for me as it works nice but I have a query that why my application hangs after sometime and stops reading data from COM PORT.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

Terminal Error: Unable to read "/private/etc/cups/cups-files.conf" due to errors.

After finding out that my Kodak ESP C310 printer was no longer printing after installing OS X Yosemite, I tried entering these into the terminal to get the driver working again.
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
sudo launchctl stop org.cups.cupsd
Nothing happened the first time I tried it, so I tried it again with still no luck. Now within seconds of opening the terminal I get this message :
" /private/etc/cups/cups-files.conf"
It pops up every few seconds, so it is practically impossible for me to type anything into the terminal without it popping up right in the middle. I tried the fix from the other discussion on this issue, and that didn't work. also I'm noticing that my printer isn't even added under "printers and scanners" anymore. I tried to re-add it, but I cannot without a driver that functions with 10.10.1
Any suggestions on how I should deal with this?

The permissions and ownership on /private/etc/cups/cups-files.conf should be:
/bin/ls -leO@ /private/etc/cups/cups-files.conf
-rw-r--r-- 1 root _lp compressed 3297 Mar 8 2014 /private/etc/cups/cups-files.conf
See "man cups-files" for the format of the cups-files.conf file
The contents of the /private/etc/cups/cups-files.conf file should look like:
# "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $"
# Sample file/directory/user/group configuration file for the CUPS scheduler.
# See "man cups-files.conf" for a complete description of this file.
# List of events that are considered fatal errors for the scheduler...
#FatalErrors config
# Do we call fsync() after writing configuration or status files?
#SyncOnClose No
# Default user and group for filters/backends/helper programs; this cannot be
# any user or group that resolves to ID 0 for security reasons...
#User _lp
#Group _lp
# Administrator user group, used to match @SYSTEM in cupsd.conf policy rules...
SystemGroup admin
SystemGroupAuthKey system.print.admin
# User that is substituted for unauthenticated (remote) root accesses...
#RemoteRoot remroot
# Do we allow file: device URIs other than to /dev/null?
#FileDevice No
# Permissions for configuration and log files...
#ConfigFilePerm 0644
#LogFilePerm 0644
# Location of the file logging all access to the scheduler; may be the name
# "syslog". If not an absolute path, the value of ServerRoot is used as the
# root directory. Also see the "AccessLogLevel" directive in cupsd.conf.
AccessLog /private/var/log/cups/access_log
# Location of cache files used by the scheduler...
#CacheDir /private/var/spool/cups/cache
# Location of data files used by the scheduler...
#DataDir /usr/share/cups
# Location of the static web content served by the scheduler...
#DocumentRoot /usr/share/doc/cups
# Location of the file logging all messages produced by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "LogLevel"
# directive in cupsd.conf.
ErrorLog /private/var/log/cups/error_log
# Location of fonts used by older print filters...
#FontPath /usr/share/cups/fonts
# Location of LPD configuration
#LPDConfigFile launchd:///System/Library/LaunchDaemons/org.cups.cups-lpd.plist
# Location of the file logging all pages printed by the scheduler and any
# helper programs; may be the name "syslog". If not an absolute path, the value
# of ServerRoot is used as the root directory. Also see the "PageLogFormat"
# directive in cupsd.conf.
PageLog /private/var/log/cups/page_log
# Location of the file listing all of the local printers...
#Printcap /Library/Preferences/org.cups.printers.plist
# Format of the Printcap file...
#PrintcapFormat bsd
#PrintcapFormat plist
#PrintcapFormat solaris
# Location of all spool files...
#RequestRoot /private/var/spool/cups
# Location of helper programs...
#ServerBin /usr/libexec/cups
# SSL/TLS certificate for the scheduler...
#ServerCertificate /Library/Keychains/System.keychain
# SSL/TLS private key for the scheduler...
#ServerKey
# Location of other configuration files...
#ServerRoot /private/etc/cups
# Location of Samba configuration file...
#SMBConfigFile
# Location of scheduler state files...
#StateDir /private/etc/cups
# Location of scheduler/helper temporary files. This directory is emptied on
# scheduler startup and cannot be one of the standard (public) temporary
# directory locations for security reasons...
#TempDir /private/var/spool/cups/tmp
# End of "$Id: cups-files.conf.in 11203 2013-07-26 21:32:33Z msweet $".

Terminal: unable to read "/private/etc/cups/cups-files.conf" due to errors

Terminal is giving me the message above every 10 seconds making it impossible to write any lines without the error message breaking up the line. Any suggestions on how to resolve this issue?

Back up all data.
Select
Shell ▹ New Command
from the Terminal menu bar. Uncheck the box marked
Run command inside a shell
if checked.
Copy and paste the following line into the text box that opens, then press return:
mkdir disabled_shell_files
Close the Terminal window that opens. Repeat with this line:
mv .profile .bash_history .bash_profile .bashrc .inputrc disabled_shell_files
Your old shell initialization and history files will be saved in a directory named "disabled_shell_files" at the top level of your home directory. It's normal that some of these files will not exist, and therefore you will get some "no such file" errors.
Close the window, open a new one, and test.

Error Reads:"You can't open the application "Adobe Photoshop CS4" because it is not supported on this architecture?!?"

I am trying to install Photoshop CS4 onto my MAC Pro OS X Version 10.5.7 - Processor 2.66 GHz Quad-Core Intel Xeon....Memory: 3 GB 1066 MHz DDR3. WHAT GIVES?

I would first quit Illustrator and then;
I would go to Users/username/Library/preferences/Adobe Illustrator CS4 Settings folder and trash that settings folder.
I believe if that does not work it is a permissions problem so repair your permissions and see if that helps.
if not log in as a new user see if you get the same error.

Java App on Linux : Unable to read iso-8859-1 encoded file correctly.

I have a file which is encoded as iso-8859-1, and contains characters such as ô .
I am reading this file with java code, something like:
File in = new File("myfile.csv");
InputStream fr = new FileInputStream(in);
byte[] buffer = new byte[4096];
while (true) {
int byteCount = fr.read(buffer, 0, buffer.length);
if (byteCount <= 0) {
break;
String s = new String(buffer, 0, byteCount,"ISO-8859-1");
System.out.println(s);
However the ô character is always garbled, usually printing as a ? .
I am running this on a Linux machine. It works fine on my XP machine.
I have verified that I can see the correct characters when I cat the file on the terminal.
(Interestingly, but I think maybe only by co-incidence, it works when I run with the -Dfile.encoding=UTF16 option, but not with UTF8, although this appears a hack rather than a fix since this option was not intended for developer use by sun - but I thought mentioning it may provide some clues as to what is going on)

I think your main probelm is with the console. When you send text to the console, it's sent in the system default encoding. On an English-locale system that might be ASCII, ISO-8859-1, windows-1252, UTF-8, MacRoman, and probably several other possibilities. Then the console decodes the the bytes using whatever encoding it feels like using--on my WinXP machine, it uses cp437 by default (just for laughs, as far as I can tell). If the text happens to be pure, seven-bit ASCII, there's no problem, since all those encodings are identical in that range.
But if you need to output anything other than ASCII characters, avoid the console. Send the output to a file and specify an encoding that you know will be able to handle your characters--UTF-8 can handle anything. Then open the file with an editor that can read that encoding; most of them can handle UTF-8 these days, and many will even detect it automatically. You also need to be using a font that can display your characters.
However, you're also going about the reading part wrong. Instead of reading the text in as bytes and passing them to a String constructor, you should use an InputStreamReader and read it as text from the beginning: BufferedReader br = new BufferedReader(
new InputStreamReader(
new FileInputStream("myfile.csv"), "ISO-8859-1"));I am curious about your statement that "it works" when you run with the -Dfile.encoding=UTF16 option. I wouldn't be surprised to see it output the correct characters (ASCII characters, anyway), but I would expect to see the characters interspersed with blank spaces or rectangles.

4.1 rc1 - unable to read monochrome Sigma DP X3F files

Sigma DP2s
LR 4.1 rc1
I import .X3F files to LR catalogue from SD card via card reader.
LR reads and allows me to edit these OK
If I then edit the .X3F files using Sigma Photo Pro v5.1, and change WB to "Monochrome", then save the modification to the raw file (in SPP5.1), and then attempt to look at it in LR in the develop module, I get the error "There was a problem working with the file"..
Followed by "Lightroom has encountered problems reading this photo. You will not be able to make adjustments to the photo."
I have tried this a number of times with different X3F image files with the same result.
I have tried (separately) synchronizing, deleting and re-importing the file with the same result.
LR3 worked perfectly in this regard - if a .X3F file was imported, then changed using SPP5.1 to mono, the effect would be immediately seen in LR without errors.
NB If I then set the WB back from monochrome in SPP5.1, LR is able to work with theimage file again with noerrors.
I have also encountered similar error messages when trying to export jpgs from edited .tiff files created using a film scanner, which may be related. When or if I can reproduce that I will start a separate thread.

Lightroom is raw conversion software and once your camera is supported it will be able to process the raw data. However if you use other raw conversion software to process the raw data or partially process the raw file you have altered the raw file and Lightroom will no longer be able to process. With raw data you can only choose one chef.

Error updating AE: ERROR: DS015: Unable to read symlink target of source file "/Applications/Adobe After Effects CC 2014/Plug-ins/Effects/mochaAE/(Mocha Support)/mocha AE CC.app/Contents/MacOS/mediaioserver.app/Contents/CodeResources"(Seq 212)

Similar Messages

Maybe you are looking for