Error when Activate an DataStoreObject while transport
Hi experts:
I Try to transport an DataStoreObject From QAS to PROD.
1. I transport all Infoobjects from DEV - QAS . PROD OK.
2. I transport an ODSO from DEV - QAS OK.
3. When y try to transport to PRD y have the folowing error:
Error / Warning in progr.activación Dict., Detailed log> Detail
By detail (or the path details -> Log -> Turn Dictionary ABAP) will receive full details of the log module activation.
I dont know where do this.
I need activate this details log error.
Hi,
Yes of course i see the log in se09 and the first error I found is as follow.
Error / Warning in progr.activación Dict., Detailed log> Detail
Failed attempt to execute the SQL statement.
Table / BIC/B0000314000 (failure to adapt the database).
Table / BIC/B0000314000 could not be activated.
Then follow otrers error.
Similar Messages
-
Error when activating update rule after transporting to QA
Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
VijayHi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini -
Error when activate I/O: inconsistency DD - DB
Hello gurus,
I modified the IO 0COSTELMNT in Dev system, I added two custom IO as attributes.
I modified the transfer rule and Communication Structure.
I transported the modify with success and I load the master data in order to populate the new attributes (in Test and then Production system ).
Looking the values I realized that the new attributes were time dependent, maybe by my mistake.
Then in Dev system I deleted the flag "Time dependent" for the two new attributes in the section "Detail/Navigation attributes" of IO 0COSTELMNT.
When I transported this last modify I received the error:
Char. 0COSTELMNT: Attribute ZCOSTELMP is time-dependent (cannot become time-independent)
Message no. R7583
Diagnosis
You have changed the attribute ZCOSTELMP for characteristic 0COSTELMNT from time-dependent to time-independent. An analysis of the master data found that, over time, various values existed for the attribute. The attribute is therefore time-dependent.
System response
You can not change the attribute to time-independent.
Procedure
You first have to delete master data from characteristic 0COSTELMNT so that the ambiguous forms of attribute ZCOSTELMP will disappear over time. Only afterwards can you change the attribute to time-independent.
Then I restore the flag "Time dependent" for the two new attributes in Dev system and I re-trasported the modify in Test system.
I receive this error
No active nametab exists for /BI0/QCOSTELMNT
Termination due to inconsistencies
Table /BI0/QCOSTELMNT (Statements could not be generated)
DDIC Object TABL /BI0/QCOSTELMNT has not been activated
Error when activating InfoObject 0COSTELMNT
Characteristic 0COSTELMNT is blocked by conversion
I check the table /BI0/QCOSTELMNT in the ABAP dictionary, I received thi error
/BI0/QCOSTELMNT : inconsistency DD <-> DB (check table with analysis tool).
How can I resolve this problem? My BW version is 3.50.
GianniThe activation is unable to adjust new columns/attributes with existing ones at DB level....so delete all values in IO tables.
Use se14 to further clean up individual tables.
CAUTION: You might have to make the same clean in PROD....so this will result recomputation on SID... -
Error when activate analytic view (join tables)-Exception during activation
Dear guru,
I suffered an error showed "Exception during activation" when activate a newly created analytic view.
I used two tables, one is NASDAQDAILY, one is NYSEDAILY.
Private attribute are "DATE, STOCK(NYSE.STOCK), STOCK_1(NASDAQ.STOCK"
Measure are "PRICEOPEN(NYSE), PRICEOPEN_1(NASDAQ)"
JOINS are: Left Table-NASDAQ, Left Column-DATE
Right Table-NYSE, Right Column-DATE
Validate is sucessfully.
But when "Save and Activate", it gave below error.
Kindly help me on this. Thank you so much.
com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentException: Error during deployment
_ at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.processMeasures(CubeElement.java:591)_
_ at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeElement.initialize(CubeElement.java:170)_
_ at com.sap.ndb.studio.sdk.resource.deployment.bi.cv.CubeSchemaRoot.initialize(CubeSchemaRoot.java:80)_
_ at com.sap.ndb.studio.sdk.resource.deployment.bi.DeploymentExecutor.initialize(DeploymentExecutor.java:159)_
_ at com.sap.ndb.studio.sdk.resource.deployment.bi.CubeDimensionDeploymentExecutor.initialize(CubeDimensionDeploymentExecutor.java:78)_
_ at com.sap.ndb.studio.sdk.resource.bi.core.impl.BiResourceImpl.activateObjects(BiResourceImpl.java:236)_
_ at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activateObjects(ResourceImpl.java:868)_
_ at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceImpl.activate(ResourceImpl.java:727)_
_ at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:166)_
_ at com.sap.ndb.studio.sdk.resource.repository.core.impl.ResourceManager.activateAll(ResourceManager.java:202)_
_ at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.activateObjects(ActivateJob.java:92)_
_ at com.sap.ndb.studio.modeler.job.type.activate.ActivateJob.run(ActivateJob.java:71)_
_ at org.eclipse.core.internal.jobs.Worker.run(Worker.java:54)_Hello,
This issue is resolved now.
The problem was with the file system space on the Unix server(on which portal is installed).
The server administrators and the Basis team extended the disk space and issue got resolved.
Thanks for all your inputs.
Sonali. -
Error when activate the Adobe forms
Hi,
I am getting the below error message when activate the adobe forms,and the message tells that to install a forms design tool,please tell me which tool in need to install and where i will get this tool.
Could not start Layout Designer (see long text)
Message no. FPUIFB086
Diagnosis
The forms design tool for developing the form layout could not be started; either it is not installed or there are errors in the installation.
Procedure
Make sure that you have the forms design tool installed on your desktop (the tool is part of the SAPGUI installation).
Also read SAP Note 801524.
Thanks,
Deesanth.FIrstly, you have posted the question in the wrong forum. There's an entire forum in SCN only for Interactive Forms: .
Secondly, this is a frequently asked question, especially in the Interactive Forms Forum. There's enough information there to get your query solved by searching.
pk -
Error when activate Info Object
Hi everybody.
Maybeyou can help me.
I made a transport to the production system.
The system was disconnected when i made the transfer. The transportation has fail, however, has generated objects in the target system.
In particular I have a problem with a standard InfoObject (0GN_BWBEOTY).
This object was transported to Production environment but has been inactive.
I can not activate it.
I used the transaction RSRV InfoObjetct, to validate integrity and I get the following errors:
CL_RSMD_RS_0GN_BWBEOTY Class, Method IF_RSMD_RS_ACCESSS ~ get_text.
"RSBWBEOTY" is not defined in the ABAP Dictionary as a table.
I tried to move into a new transport order, the only InfoObject but I get error code 12.
Someone has happened, can you give me ideas? what can i can do?
Thank you very much for help me!Hi!
Thank you for your help.
I still have the problem .
I can not verify whether the information in master data, since the transported infoObjetct not appear in the RSA1 (production) and can not display the master data RSDMD trx.
And i can not activate through RSDG_IOBJ_ACTIVATE. I get the error message detailed in the first post.
This is the transport log:
| Program terminated (job: RDDEXECL, no.: 15123000)
| See job log
| Execution of programs after import (XPRA)
| End date and time : 20110519151246
| Ended with return code: ===> 12 <===
| ######################################
This is te JOB Log:
19.05.2011
15:12:31
Job started
00
516
S
19.05.2011
15:12:31
Step 001 started (program RDDEXECL, variant , user ID DDIC)
00
550
S
19.05.2011
15:12:31
All DB buffers of application server SFESA-20 were synchronized
PU
170
S
19.05.2011
15:12:36
Internal session terminated with a runtime error (refer to ST22)
00
671
A
|19.05.2011 |15:12:36 |Job cancelled
Any ideas?
Edited by: Javier Sarrelli on May 20, 2011 8:14 PM -
Error when activate a new InfoCube
Hi All,
I have a big and mysterious error. I made some InfoCubes (more info), but when I transported them into the Q system, the transport has error code 8. After that I deleted those inactive cubes from the Q system and recreated them, but the system could not activate those cubes, the error message is the following:
"Object ZXXXX could not be activated"
The long texts are the same of transport's:
"Error/warning in dict. activator, detailed log --> Detail"
"Activate table /BIC/DXXXX1"
"Enhancement category for table missing"
"Enhancement category for include or subtype missing"
"A table called /BIC/DXXXX1 exists in the database"
"No active nametab exists for /BIC/DXXXX1"
"Termination due to inconsistencies"
"Table /BIC/DXXXX1 (Statements could not be generated)"
"Error number in DD_DECIDE (9)"
"Flag: 'Incorrect enhancement category' could not be updated"
"Table /BIC/DXXXX1 was not activated"
What is the reason of this error? How can I fix them?
Thanks for your help!
TamáHi Ankit,
Thanks for your reply.
What do you mean of our BIC table deleted?
I would like to create a new InfoCube with same name which deleted earlier, but I cannot? Why? What I have to do to before create the cube second time? I just would like to recreate the deleted cube, nothing else...
Tamá -
Error when activate the transfer ruels
Hi,
When we activate the transfer rules for InfoSource / InfoObject 0MATL_TYPE, we
get the following error message:
Error while creating table 'EDISEGMENT' entry '/BIC/CIHB0MATL_TYPE_TEXT'
Thx for answer.Hi,
Check 0MATL_TYPE and attributes are active or not?. check all Infoobject are active or not?. if not then activate objects and then replicate the DS in BW and then activate.
Thanks
Reddy -
Error When Activate Adobe Form?
hi,
When i save layout and come out from there and than when i am save adobe form and trying to activate form it ask me in the dialog window,
Enter your user name and ID
Resource AdobeDocumentServices/Con
User name
Password
if i enter my logon id & pwd it shows me status message,
SOAP Framework Error ; SOAP Runtime Error : CSoapExceptionTransport : HTTP Send returned with status code (100,101).
Please try to resolve and get back to me ..
Thanks,
Saurin ShahHi,
Please check below link
http://help.sap.com/saphelp_nw70/helpdata/EN/4f/a00d41921bf023e10000000a155106/content.htm
Regards
Jana -
Error when activate Transformation to cube 0IC_C03
Gurus:
I need to activate the 2lis_03_bf_tr transformation to cube 0IC_C03, when I activate the transformation, the system indicate the next error:
"E:In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is incompatible with the formal parameter "DATA_PACKAGE"."
I made changes in the routine, but the error still happens
Thanks for your help!!!!
César.It seems like you have migrated the 3.x data source to 7.0x version. And I believe you have added new info objects. In the start routine code add the new info objects to the structure "_ty_s_*_" whenever you add new fields.
In the code in the
"Rule Specific Types"
"Types"
"BEGIN OF tys_*_"
Add the info objects.
*Please assign any rating if you find the answer helpful*
Edited by: ram.pch on Jul 2, 2011 6:02 AM -
Error when adding EPA file to transport request via CTS
I have a rather strange problem. Sometimes when attempting to add an EPA file to a Transport Request via CTS I get the following error in my logs with a corresponding short dump. This does not happen all the time.
#000255D36E8F005B00015391000003DC00046C0470FF1359#1244666238275#com.sap.portal.pcdadmintools#sap.com/irj#com.sap.portal.pcdadmintools#MOROZOWSKIJO#24750##rp1.conair.com_RP1_2406850#MOROZOWSKIJO#28167c7055fe11dea0f1000255d36e8f#SAPEngine_Application_Thread[impl:3]_10##0#0#Error#1#/System/Server#Java### [com.sapportals.portal.pcd.admintools.export.ExportCTSHandling] Could not attach epa file to transport request
[EXCEPTION]
{0}#1#com.sap.tc.di.draft.ts.TsExecutionException: Error executing function (check stacktrace for details):CTS_FILE_APPEND_TO_REQUEST, (service=com.sap.tms)
at java.lang.Throwable.<init>(Throwable.java:216)
at java.lang.Exception.<init>(Exception.java:59)
at com.sap.tc.di.draft.ts.TsException.<init>(TsException.java:19)
at com.sap.tc.di.draft.ts.TsServiceException.<init>(TsServiceException.java:16)
at com.sap.tc.di.draft.ts.TsExecutionException.<init>(TsExecutionException.java:16)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsServiceException(TmsJCoExceptions.java:74)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoExceptions.throwTsException(TmsJCoExceptions.java:35)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:536)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.handOverAsStream(TmsTransportService.java:253)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsTransportService.requestUpdate(TmsTransportService.java:202)
at com.sap.tc.di.draft.ts.impl.TransportRequestImpl.transmit(TransportRequestImpl.java:97)
at com.sap.tc.di.draft.ts.impl.TransmissionPackageImpl.transmit(TransmissionPackageImpl.java:49)
at com.sapportals.portal.pcd.admintools.export.ExportCTSHandling.attachFileToPackage(ExportCTSHandling.java:209)
at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.prepareGenericPageSettings(ExportStatusPage.java:417)
at com.sapportals.portal.pcd.admintools.export.pages.ExportStatusPage.dispatchPageRequest(ExportStatusPage.java:241)
at com.sapportals.portal.pcd.admintools.export.ExportMain.doContent(ExportMain.java:89)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:166)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:111)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:200)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:115)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:177)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:438)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:404)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:79)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:848)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:332)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:0)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:335)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:963)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:249)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:0)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:92)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:30)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:35)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:103)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: The current application triggered a termination with a short dump.
at java.lang.Throwable.<init>(Throwable.java:194)
at java.lang.Exception.<init>(Exception.java:41)
at java.lang.RuntimeException.<init>(RuntimeException.java:43)
at com.sap.mw.jco.JCO$Exception.<init>(JCO.java:1117)
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1224)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3909)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3417)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:112)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.executeFunction(TmsJCoAdapter.java:133)
at com.sap.tc.di.draft.cts.impl.adapters.jco.TmsJCoAdapter.addFileToRequest(TmsJCoAdapter.java:531)
... 38 more
Edited by: Jon Morozowski on Jun 10, 2009 10:57 PMHere is the short dump in the ABAP system.
Short text of error message:
INTERNAL ERROR UPDATING REQUEST DESC OF RP1K900690
Long text of error message:
Technical information about the message:
Message class....... "PU"
Number.............. 601
Variable 1.......... "INTERNAL ERROR UPDATING REQUEST DESC OF"
Variable 2.......... "RP1K900690"
Variable 3.......... " "
Variable 4.......... " "
I have checked the RFC destination in the J2EE Admin and that works OK. This has me kind of stumped. -
Error when activate a SAP source system
Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
NiurkaYes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks! -
Error when activate 0DISTR_CHAN
Hi dear all,
I''ve a quesiton urgent in BW3.5, plz.
I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found its transfer rule isn't yet activated. I tried to activated it but a error message like:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template: RSTMPL80
Error code / Action: 6
Row: 49
Message: Statement concluding with "...LIKE" ended unexpect
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
Please help!
Thanks a lot.
JuanHi Sunil,
Thanks a lot.
I can't modify the Communication structure like in SAP note 602318, maybe because it's an InfoSource for InfoObject.
I tried to re-install this business content just with flow before. And It works.
Best regards.
Juan -
Error when activate transfer rule 0DISTR_CHAN
Hi dear all,
I''ve a quesiton urgent, plz.
I've activated IO 0DISTR_CHAN, so his flow before and after. I went to load master data, but I found his transfer rule isn't yet activated. I tried to activated it but a error message like:
Error generating program
Message no. RSAR245
Diagnosis
An error occurred in the program generation:
Program / Template: RSTMPL80
Error code / Action: 6
Row: 49
Message: Statement concluding with "...LIKE" ended unexpect
Procedure
If the problem occurred during the data load or transport, activate the transfer rule.
If the problem persists, search in the SAP note system under 'RSAR 245'.
Please help!
Thanks a lot.
JuanHi dear all,
Thanks!
I tried to re-install this business content just with flow before. And It works.
Best regards.
Juan -
Hi All,
I try to activate customer exit variable program ZXRSRU01, but show is warning message:
Function Module EXIT_SAPLRRS0_001
(E) Pakage "RSROA_MISC" cannot use object "PROG ZXRSRU01 INCLUDE
\IC:ZXRSRU01" from package "ZBW1_DEV" in any of the following ways:
"Use object or type"
Is there anyone know this message?
Thanks beforehand.
Regards,
StephHi Steph,
there is nothing wrong with ZXRSRU01 being assigend to a Z* package. We have set it up like this, too.
I suppose you have a syntax error somewhere in your source code of ZXRSRU01 or the package ZBW1_DEV is not set up correctly. My first guess would be to check the Transport Layer of the package. Speak to your Basis or ABAP team.
Best,
Ralf
Maybe you are looking for
-
MRP Type V1, VB, or PD.
I am loking to maintain MM02 MRP Type and maintain re-order point at 0. MRP Type V1 & VB are not allowing me to enter 0 as a re-order point value. I am in a simple distribution environment where finished goods are purchased and issued with no sales o
-
Final Cut Pro 5.1 project files backwards compatibility
I have just installed Final Cut Studio HD (universal) onto my new Macbook Pro 2ghz. I also run an iMac G5 2ghz which has been my main editing platform for the last year or so. I decided to port some of my current projects over onto my MacBook Pro and
-
Mpower// if i use 2 ssds in port 1&2 in riad 0 can i not use hdd in sata ports 3
mpower// if i use 2 ssds in port 1&2 in riad 0 can i not use hdd in sata ports 3 4 5 6 as my hdd wont work does not show up in bios or windows// help help
-
Problems opening files in pages and keynote from iCloud. Other IOS-devices show no problem
I have problems in getting files opened on computer from Icloud. For both Pages and Keynote. Happens when they have been opened on Iphone og Ipad
-
Sample code to process stylesheet on serverside
Hi, Can u please give me a sample code to process style sheet on server side. The xml document is obtained from database. Thanks RAJ