Error When Adding Audio to Accordion Widget
I am trying to utilize the accordion widget that comes with Adobe Captivate 7. In the Widget Properties, you can add audio to the description under each tab. When I go to select a narrated audio file (that was recorded using Adobe Captivate) from the library, I get this error message stating I have "selected the wrong file type...". Has anyone encountered this? What other audio file types can be added?
I have similar bizarre behvior with the accordion widget.
I record my audio in Adobe Audition and then import to Captivate. However, when I did this with the widget the audio did not work. I discovered that if I edit the audio in the library, after I import it, it no longer works in the widget. Editing audio works fine everywhere else in Captivate.
Even more bizarre, I edited an MP3 in Audition, that had been working in the widget. I deleted the current, working, audio from the widget option, then imported the new one, but got the error This is the Wrong File Type. This happened on multiple edited MP3 files.
So, I went back to Audition, and rather than saving the edited MP3, I re-exported it to another MP3 file, and this one imports into the widget.
Similar Messages
-
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available".
When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same way, no error message. Any ideas to solve this, anyone? Would be greatly appreciated.I tried to update and it keeps telling me to get the Application Manager. And this is what happens
Adobe Application Manager failed and it told me to download the Adobe Support Advisor.
Adobe Support Advisor told me that there was an issue:" cpsid_82829s1: "A restart is pending," bootstrapper error has occurred. "Token Number: 40-87772-063201122012
I followed the instructions it gave me to correct this issue:
If you receive the error "Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again," do the following:
#Restart the computer and try the installation again.
#If the installation fails, delete the InProgress registry key:
Disclaimer: This procedure involves editing the Windows registry. Adobe doesn't provide support for editing the registry, which contains critical system and application information. Make sure to back up the registry before editing it. For more information about the registry, see Windows registry information for advanced users on the Microsoft support site, or contact Microsoft.
Launch Windows Registry Editor.
(Windows XP) Choose Start > Run, type regedit in the Open text box and click OK.
(Windows Vista/ Windows 7) Choose Start, type regedit in the Search box, and press Enter.
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager.
Delete the InProgress key.
I was not able to find the "InProgress" key. -
Error when adding a partition to a materlialized view
Hi,
I am getting this error when adding a partition to a materialized view.
ALTER MATERIALIZED VIEW mvedw.MV_CLM_CAPITN_F ADD PARTITION MAR2013 VALUES LESS THAN ('201304')
ERROR at line 1:
ORA-14074: partition bound must collate higher than that of the last partition
Please advise.
Regards,
NarayanSQL> select TABLE_OWNER,TABLE_NAME,PARTITION_NAME,HIGH_VALUE from dba_tab_partitions where table_name =
'MV_CLM_CAPITN_F' order by PARTITION_NAME 2
3 ;
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F APR2009 '200905'
MVEDW MV_CLM_CAPITN_F APR2010 '201005'
MVEDW MV_CLM_CAPITN_F APR2011 '201105'
MVEDW MV_CLM_CAPITN_F APR2012 '201205'
MVEDW MV_CLM_CAPITN_F AUG2009 '200909'
MVEDW MV_CLM_CAPITN_F AUG2010 '201009'
MVEDW MV_CLM_CAPITN_F AUG2011 '201109'
MVEDW MV_CLM_CAPITN_F AUG2012 '201209'
MVEDW MV_CLM_CAPITN_F DEC2008 '200901'
MVEDW MV_CLM_CAPITN_F DEC2009 '201001'
MVEDW MV_CLM_CAPITN_F DEC2010 '201101'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F DEC2012 '201301'
MVEDW MV_CLM_CAPITN_F FEB2009 '200903'
MVEDW MV_CLM_CAPITN_F FEB2010 '201003'
MVEDW MV_CLM_CAPITN_F FEB2011 '201103'
MVEDW MV_CLM_CAPITN_F FEB2012 '201203'
MVEDW MV_CLM_CAPITN_F FEB2013 '201303'
MVEDW MV_CLM_CAPITN_F JAN2009 '200902'
MVEDW MV_CLM_CAPITN_F JAN2010 '201002'
MVEDW MV_CLM_CAPITN_F JAN2011 '201102'
MVEDW MV_CLM_CAPITN_F JAN2012 '201202'
MVEDW MV_CLM_CAPITN_F JAN2013 '201302'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F JUL2009 '200908'
MVEDW MV_CLM_CAPITN_F JUL2010 '201008'
MVEDW MV_CLM_CAPITN_F JUL2011 '201108'
MVEDW MV_CLM_CAPITN_F JUL2012 '201208'
MVEDW MV_CLM_CAPITN_F JUN2009 '200907'
MVEDW MV_CLM_CAPITN_F JUN2010 '201007'
MVEDW MV_CLM_CAPITN_F JUN2011 '201107'
MVEDW MV_CLM_CAPITN_F JUN2012 '201207'
MVEDW MV_CLM_CAPITN_F MAR2009 '200904'
MVEDW MV_CLM_CAPITN_F MAR2010 '201004'
MVEDW MV_CLM_CAPITN_F MAR2011 '201104'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F MAR2012 '201204'
MVEDW MV_CLM_CAPITN_F MAR2013 '201304'
MVEDW MV_CLM_CAPITN_F MAY2009 '200906'
MVEDW MV_CLM_CAPITN_F MAY2010 '201006'
MVEDW MV_CLM_CAPITN_F MAY2011 '201106'
MVEDW MV_CLM_CAPITN_F NOV2009 '200912'
MVEDW MV_CLM_CAPITN_F NOV2010 '201012'
MVEDW MV_CLM_CAPITN_F NOV2012 '201212'
MVEDW MV_CLM_CAPITN_F OCT2009 '200911'
MVEDW MV_CLM_CAPITN_F OCT2010 '201011'
MVEDW MV_CLM_CAPITN_F OCT2011 '201111'
TABLE_OWNER TABLE_NAME PARTITION_NAME HIGH_VALUE
MVEDW MV_CLM_CAPITN_F OCT2012 '201211'
MVEDW MV_CLM_CAPITN_F SEP2009 '200910'
MVEDW MV_CLM_CAPITN_F SEP2010 '201010'
MVEDW MV_CLM_CAPITN_F SEP2011 '201110'
MVEDW MV_CLM_CAPITN_F SEP2012 '201210'
These are the list of partitions available.
Regards,
Narayan -
Error when adding Essbase server...
Hi,
I installed Hyperion System 9.3.1 in my development machine and encounter the following error when adding a Essbase server in AAS for the first time.
Error: 1042017: Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I used the default user "admin" and password "password". I used my servername:10080 as the server name. I hope I am right.
Why is this happening? I tried changing netdelay settings but still get the same. Is this something else? Does this have anything to do with my TCP/IP settings? I am installing this on a virtual PC.
I couldn't find an answer in previous posts.
regards
hThe things that come to mind:
The server name you use should be the name of the virtual PC, not the machine it's running on. Also, depending on the settings for the Virtual PC environment, you may have to change the network options to allow it to be visible to the network, be in the right domain, etc...
The above may or may not get you any closer, the error message itself is just saying it can't receive a response from the server, which means the server never got the request or can't send a response back.
Good Luck, -
Library error when adding contact or when logging in
The messenger server has a replica of the partition holding the users.
It's an OES 2 sp2 server, and the GW Messenger is 2.04.
Sometimes we see an error that says 'Library error' when adding a contact, or it doesn't show all users that exists with the search parameter given.
We also sporadically see a 'Library error' when some users log in to it.
Looking in the log I see an error that says 0xAE16 when users log in fails.
I can find the 0xAE11 error in the TID's but not the 0xAE16, I did find an article on the forums, mentioning this problem http://forums.novell.com/novell-prod...or-server.html, they mention memory problems, so it seems to me there is a bug that needs fixing.I've disabled the '/diruseralias-"Internet EMail Address"' setting that was set up in the strtup.ma and strtup.aa scripts.
I've also, for now at least, chosen another replica.
I haven't seen the errors yet, so here's hoping... -
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
Using Oracle EBS version 12.1.3.
Details:
Menu JOB_STRUCTURE_MENU
User Menu Name Job Strucure Menu
Menu Type Standard
Description Menu to add job, grade, and incentives
Seq = 1
Prompt = Enter and Maintain
Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
When I click save I get the error.
Any assistance would be greatly appreciated.
Thanks!Please post the details of the application release, database version and OS.
When I try to add any new menu in my newly cloned instance I get this error:
Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
Did AutoConfig complete successfully?
When I click save I get the error.
Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
Any errors in the database log file?
Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein -
Pointer when adding audio to clip
When adding audio/music to a clip (not background) it sits below the clip with a small arrow/pointer pointing to the clip. What does that pointer indicate? Why does it move? Can someone point me to resourcs that explain that in detail?
ThanksI think you are right that the marker "stays". I don't have any special insight to how this was coded by Apple, but it appears to me that you initially attach the audio to a certain frame in a certain clip. Later you can drag the audio forward or backward, and it may remain attached to the initial frame, but be given an offset. For example, the audio is attached to frame five of clip three, but the audio actually begins at -30 or 30 frames to the left of the anchor frame.
I think if you experimented with it, you might find that if you delete the clip with the anchor frame, the audio is deleted, too, but I don't have time to test this right now. -
TableSorter errors when adding new data
so here is the deal:
I am using the TableSorter.java helper class with DefaultTableModel
from: http://java.sun.com/docs/books/tutorial/uiswing/components/table.html
It works great when the data is static and I get it for the first time. however, occationally, when adding new data I get a NullPointerException error.
in use:
DefaultTableModel.addRow()
DefaultTableModel.removeRow() and
DefaultTableModel.insertRow() methods.
Error:
java.lang.ArrayIndexOutOfBoundsException: 5
at com.shared.model.TableSorter.modelIndex(TableSorter.java:294)
at com.shared.model.TableSorter.getValueAt(TableSorter.java:340)
at javax.swing.JTable.getValueAt(Unknown Source)
at javax.swing.JTable.prepareRenderer(Unknown Source)...
code problem I:
public Object getValueAt(int row, int column)
return tableModel.getValueAt(modelIndex(row), column);
}code problem II:
public int modelIndex(int viewIndex)
return getViewToModel()[viewIndex].modelIndex;
}TableSroter class:
package com.shared.model;
import java.awt.*;
import java.awt.event.*;
import java.util.*;
import java.util.List;
import javax.swing.*;
import javax.swing.event.TableModelEvent;
import javax.swing.event.TableModelListener;
import javax.swing.table.*;
* TableSorter is a decorator for TableModels; adding sorting
* functionality to a supplied TableModel. TableSorter does
* not store or copy the data in its TableModel; instead it maintains
* a map from the row indexes of the view to the row indexes of the
* model. As requests are made of the sorter (like getValueAt(row, col))
* they are passed to the underlying model after the row numbers
* have been translated via the internal mapping array. This way,
* the TableSorter appears to hold another copy of the table
* with the rows in a different order.
* <p/>
* TableSorter registers itself as a listener to the underlying model,
* just as the JTable itself would. Events recieved from the model
* are examined, sometimes manipulated (typically widened), and then
* passed on to the TableSorter's listeners (typically the JTable).
* If a change to the model has invalidated the order of TableSorter's
* rows, a note of this is made and the sorter will resort the
* rows the next time a value is requested.
* <p/>
* When the tableHeader property is set, either by using the
* setTableHeader() method or the two argument constructor, the
* table header may be used as a complete UI for TableSorter.
* The default renderer of the tableHeader is decorated with a renderer
* that indicates the sorting status of each column. In addition,
* a mouse listener is installed with the following behavior:
* <ul>
* <li>
* Mouse-click: Clears the sorting status of all other columns
* and advances the sorting status of that column through three
* values: {NOT_SORTED, ASCENDING, DESCENDING} (then back to
* NOT_SORTED again).
* <li>
* SHIFT-mouse-click: Clears the sorting status of all other columns
* and cycles the sorting status of the column through the same
* three values, in the opposite order: {NOT_SORTED, DESCENDING, ASCENDING}.
* <li>
* CONTROL-mouse-click and CONTROL-SHIFT-mouse-click: as above except
* that the changes to the column do not cancel the statuses of columns
* that are already sorting - giving a way to initiate a compound
* sort.
* </ul>
* <p/>
* This is a long overdue rewrite of a class of the same name that
* first appeared in the swing table demos in 1997.
* @author Philip Milne
* @author Brendon McLean
* @author Dan van Enckevort
* @author Parwinder Sekhon
* @version 2.0 02/27/04
public class TableSorter extends AbstractTableModel
protected TableModel tableModel;
public static final int DESCENDING = -1;
public static final int NOT_SORTED = 0;
public static final int ASCENDING = 1;
private static Directive EMPTY_DIRECTIVE = new Directive(-1, NOT_SORTED);
public static final Comparator COMPARABLE_COMAPRATOR = new Comparator()
public int compare(Object o1, Object o2)
return ((Comparable) o1).compareTo(o2);
public static final Comparator LEXICAL_COMPARATOR = new Comparator()
public int compare(Object o1, Object o2)
return o1.toString().compareTo(o2.toString());
private Row[] viewToModel;
private int[] modelToView;
private JTableHeader tableHeader;
private MouseListener mouseListener;
private TableModelListener tableModelListener;
private Map columnComparators = new HashMap();
private List sortingColumns = new ArrayList();
public TableSorter()
this.mouseListener = new MouseHandler();
this.tableModelListener = new TableModelHandler();
public TableSorter(TableModel tableModel)
this();
setTableModel(tableModel);
public TableSorter(TableModel tableModel, JTableHeader tableHeader)
this();
setTableHeader(tableHeader);
setTableModel(tableModel);
private void clearSortingState()
viewToModel = null;
modelToView = null;
public TableModel getTableModel()
return tableModel;
public void setTableModel(TableModel tableModel)
if (this.tableModel != null)
this.tableModel.removeTableModelListener(tableModelListener);
this.tableModel = tableModel;
if (this.tableModel != null)
this.tableModel.addTableModelListener(tableModelListener);
clearSortingState();
fireTableStructureChanged();
public JTableHeader getTableHeader()
return tableHeader;
public void setTableHeader(JTableHeader tableHeader)
if (this.tableHeader != null)
this.tableHeader.removeMouseListener(mouseListener);
TableCellRenderer defaultRenderer = this.tableHeader.getDefaultRenderer();
if (defaultRenderer instanceof SortableHeaderRenderer)
this.tableHeader.setDefaultRenderer(((SortableHeaderRenderer) defaultRenderer).tableCellRenderer);
this.tableHeader = tableHeader;
if (this.tableHeader != null)
this.tableHeader.addMouseListener(mouseListener);
this.tableHeader.setDefaultRenderer
new SortableHeaderRenderer(this.tableHeader.getDefaultRenderer())
public boolean isSorting()
return sortingColumns.size() != 0;
private Directive getDirective(int column)
for (int i = 0; i < sortingColumns.size(); i++)
Directive directive = (Directive)sortingColumns.get(i);
if (directive.column == column)
return directive;
return EMPTY_DIRECTIVE;
public int getSortingStatus(int column)
return getDirective(column).direction;
private void sortingStatusChanged()
clearSortingState();
fireTableDataChanged();
if (tableHeader != null)
tableHeader.repaint();
public void setSortingStatus(int column, int status)
Directive directive = getDirective(column);
if (directive != EMPTY_DIRECTIVE)
sortingColumns.remove(directive);
if (status != NOT_SORTED)
sortingColumns.add(new Directive(column, status));
sortingStatusChanged();
protected Icon getHeaderRendererIcon(int column, int size)
Directive directive = getDirective(column);
if (directive == EMPTY_DIRECTIVE)
return null;
return new Arrow(directive.direction == DESCENDING, size, sortingColumns.indexOf(directive));
private void cancelSorting()
sortingColumns.clear();
sortingStatusChanged();
public void setColumnComparator(Class type, Comparator comparator)
if (comparator == null)
columnComparators.remove(type);
else
columnComparators.put(type, comparator);
protected Comparator getComparator(int column)
Class columnType = tableModel.getColumnClass(column);
Comparator comparator = (Comparator) columnComparators.get(columnType);
if (comparator != null)
return comparator;
if (Comparable.class.isAssignableFrom(columnType))
return COMPARABLE_COMAPRATOR;
return LEXICAL_COMPARATOR;
private Row[] getViewToModel()
if (viewToModel == null)
int tableModelRowCount = tableModel.getRowCount();
viewToModel = new Row[tableModelRowCount];
for (int row = 0; row < tableModelRowCount; row++)
viewToModel[row] = new Row(row);
if (isSorting())
Arrays.sort(viewToModel);
return viewToModel;
public int modelIndex(int viewIndex)
return getViewToModel()[viewIndex].modelIndex;
private int[] getModelToView()
if (modelToView == null)
int n = getViewToModel().length;
modelToView = new int[n];
for (int i = 0; i < n; i++)
modelToView[modelIndex(i)] = i;
return modelToView;
// TableModel interface methods
public int getRowCount()
return (tableModel == null) ? 0 : tableModel.getRowCount();
public int getColumnCount()
return (tableModel == null) ? 0 : tableModel.getColumnCount();
public String getColumnName(int column)
return tableModel.getColumnName(column);
public Class getColumnClass(int column)
return tableModel.getColumnClass(column);
public boolean isCellEditable(int row, int column)
return tableModel.isCellEditable(modelIndex(row), column);
public Object getValueAt(int row, int column)
return tableModel.getValueAt(modelIndex(row), column);
public void setValueAt(Object aValue, int row, int column)
tableModel.setValueAt(aValue, modelIndex(row), column);
// Helper classes
private class Row implements Comparable
private int modelIndex;
public Row(int index)
this.modelIndex = index;
public int compareTo(Object o)
int row1 = modelIndex;
int row2 = ((Row) o).modelIndex;
for (Iterator it = sortingColumns.iterator(); it.hasNext();)
Directive directive = (Directive) it.next();
int column = directive.column;
Object o1 = tableModel.getValueAt(row1, column);
Object o2 = tableModel.getValueAt(row2, column);
int comparison = 0;
// Define null less than everything, except null.
if (o1 == null && o2 == null)
comparison = 0;
} else if (o1 == null)
comparison = -1;
} else if (o2 == null)
comparison = 1;
} else {
comparison = getComparator(column).compare(o1, o2);
if (comparison != 0)
return directive.direction == DESCENDING ? -comparison : comparison;
return 0;
private class TableModelHandler implements TableModelListener
public void tableChanged(TableModelEvent e)
// If we're not sorting by anything, just pass the event along.
if (!isSorting())
clearSortingState();
fireTableChanged(e);
return;
// If the table structure has changed, cancel the sorting; the
// sorting columns may have been either moved or deleted from
// the model.
if (e.getFirstRow() == TableModelEvent.HEADER_ROW)
cancelSorting();
fireTableChanged(e);
return;
// We can map a cell event through to the view without widening
// when the following conditions apply:
// a) all the changes are on one row (e.getFirstRow() == e.getLastRow()) and,
// b) all the changes are in one column (column != TableModelEvent.ALL_COLUMNS) and,
// c) we are not sorting on that column (getSortingStatus(column) == NOT_SORTED) and,
// d) a reverse lookup will not trigger a sort (modelToView != null)
// Note: INSERT and DELETE events fail this test as they have column == ALL_COLUMNS.
// The last check, for (modelToView != null) is to see if modelToView
// is already allocated. If we don't do this check; sorting can become
// a performance bottleneck for applications where cells
// change rapidly in different parts of the table. If cells
// change alternately in the sorting column and then outside of
// it this class can end up re-sorting on alternate cell updates -
// which can be a performance problem for large tables. The last
// clause avoids this problem.
int column = e.getColumn();
if (e.getFirstRow() == e.getLastRow()
&& column != TableModelEvent.ALL_COLUMNS
&& getSortingStatus(column) == NOT_SORTED
&& modelToView != null)
int viewIndex = getModelToView()[e.getFirstRow()];
fireTableChanged(new TableModelEvent(TableSorter.this,
viewIndex, viewIndex,
column, e.getType()));
return;
// Something has happened to the data that may have invalidated the row order.
clearSortingState();
fireTableDataChanged();
return;
private class MouseHandler extends MouseAdapter
public void mouseClicked(MouseEvent e)
JTableHeader h = (JTableHeader) e.getSource();
TableColumnModel columnModel = h.getColumnModel();
int viewColumn = columnModel.getColumnIndexAtX(e.getX());
int column = columnModel.getColumn(viewColumn).getModelIndex();
if (column != -1)
int status = getSortingStatus(column);
if (!e.isControlDown())
cancelSorting();
// Cycle the sorting states through {NOT_SORTED, ASCENDING, DESCENDING} or
// {NOT_SORTED, DESCENDING, ASCENDING} depending on whether shift is pressed.
status = status + (e.isShiftDown() ? -1 : 1);
status = (status + 4) % 3 - 1; // signed mod, returning {-1, 0, 1}
setSortingStatus(column, status);
private static class Arrow implements Icon
private boolean descending;
private int size;
private int priority;
public Arrow(boolean descending, int size, int priority)
this.descending = descending;
this.size = size;
this.priority = priority;
public void paintIcon(Component c, Graphics g, int x, int y)
Color color = c == null ? Color.GRAY : c.getBackground();
// In a compound sort, make each succesive triangle 20%
// smaller than the previous one.
int dx = (int)(size/2*Math.pow(0.8, priority));
int dy = descending ? dx : -dx;
// Align icon (roughly) with font baseline.
y = y + 5*size/6 + (descending ? -dy : 0);
int shift = descending ? 1 : -1;
g.translate(x, y);
// Right diagonal.
g.setColor(color.darker());
g.drawLine(dx / 2, dy, 0, 0);
g.drawLine(dx / 2, dy + shift, 0, shift);
// Left diagonal.
g.setColor(color.brighter());
g.drawLine(dx / 2, dy, dx, 0);
g.drawLine(dx / 2, dy + shift, dx, shift);
// Horizontal line.
if (descending) {
g.setColor(color.darker().darker());
} else {
g.setColor(color.brighter().brighter());
g.drawLine(dx, 0, 0, 0);
g.setColor(color);
g.translate(-x, -y);
public int getIconWidth()
return size;
public int getIconHeight()
return size;
private class SortableHeaderRenderer implements TableCellRenderer
private TableCellRenderer tableCellRenderer;
public SortableHeaderRenderer(TableCellRenderer tableCellRenderer)
this.tableCellRenderer = tableCellRenderer;
public Component getTableCellRendererComponent(JTable table,
Object value,
boolean isSelected,
boolean hasFocus,
int row,
int column)
Component c = tableCellRenderer.getTableCellRendererComponent(table,
value, isSelected, hasFocus, row, column);
if (c instanceof JLabel) {
JLabel l = (JLabel) c;
l.setHorizontalTextPosition(JLabel.LEFT);
int modelColumn = table.convertColumnIndexToModel(column);
l.setIcon(getHeaderRendererIcon(modelColumn, l.getFont().getSize()));
return c;
private static class Directive
private int column;
private int direction;
public Directive(int column, int direction)
this.column = column;
this.direction = direction;
}any input will be appreciated.
thanks
PeterThe code you posted doesn't help us at all. Its just a duplicate of the code from the tutorial. The custom code is what you have written. For example do you update the TableModel from the Event Thread? Do you update the SortModel or the DefaultTableModel? If you actually provide your test code and somebody has already downloaded the sort classes, then maybe they will test your code against the classes. But I doubt if people will download the sort classes and create a test program just to see if they can duplicate your results (at least I know I'm not about to).
-
TableAdapter Configuration Wizard gives error when adding new TableAdapter
Hi,
I recently downloaded and installed the ODT for visual studio on my computer. I am running VS2008 on Windows 7 64-bit. I am able to create an ODP.NET connection to the Oracle XE 10.2g instance that is running on my computer with no problems and use that connection to browse the database. When I add a DataSet to my project, and start adding TableAdapters to the DataSet, I am getting errors. In an attempt to figure out what the problem is, I have followed various scenarios. I will describe each scenario, and what the end result is, and then after I have described them all, I will explain what I think the problem might be. Here are the different scenarios I have used:
Scenario 1:
From the Server Explorer, highlight ALL of the tables in my schema and drag them to the designer (all table adapters are added with no issues). I can add additional queries to each of the TableAdapters and then change the additional queries by right clicking and choosing "Configure". This all works with no issues. However, on certain TableAdapters, if I try to modify the primary query (Fill,GetData()), I can open the query editor just fine, change various settings, etc, but when I click on "Finish" I get the following error:
Configure TableAdapter TABLENAME failed.
Index was outside the bounds of the array.
Scenario 2:
From the Server Explorer, drag tables from my schema onto the designer one at a time. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to merge object(s).
Index was outside the bounds of the array.
Scenario 3:
On the Dataset Designer, add tables one at a time by right clicking and choosing "Add -> TableAdapter" and then using SQL to define the query for each table. Some tables get added just fine, but for the rest of them, I get the following error:
Failed to add TableAdapter.
Index was outside the bounds of the array.
Ok... now that I have described all of the different scenarios, I will explain what I think the problem is, and why. Based on my research, I believe the underlying problem has to do with Foreign Key Constraints on the various tables. While working on Scenarios 2 & 3, the same exact tables worked just fine in both scenarios. When I started looking at the definitions for the tables in my schema, it turns out that all of the tables that failed had foreign key constraints defined. When I remove the FK constraints from a table, I am then able to add it to my dataset and change the default query with no problems. My original application used the System.Data.OracleClient provided by Microsoft. When adding my tableadapters using the microsoft data provider, the FK relations are automatically generated for me in the designer, but not with the Oracle Data Provider
I would be happy to provide you with the DDL that I used for creating my schema (it is not very big) if needed.
Thanks,
JimSorry let me clarify some of the config a little more.
MAIL101 - Exch 2013
MAIL102 - Exch 2013
AP104 - Witness (strictly a witness nothing else on this machine)
EDGE01 - Exch 2007 Edge
CAS01 - Exch 2007 Hub/CAS load balancer for CAS02/03
CAS02 - Exch 2007 Hub/CAS
CAS03 - Exch 2007 Hub/CAS
MBOX01 - Exch 2007 Mail cluster
MBOX02 - Exch 2007 Mail cluster node
MBOX03 - Exch 2007 Mail cluster node
RDC01, RDC02, RDC03 - all 2008 R2 root domain controllers for rootdomain.rootdomain
DC01, DC02, DC03, DC04 - all 2008 R2 domain controllers for us.rootdomain.rootdomain
All DCs are Global Catalogs.
I can ping all DCs and root DCs fromboth MAIL101 and 102
The Exchange Replication service is running on both MAIL101 and 102.
DC03 is in the same site as the MAIL101/102 servers so I'll run all replication tests from here.
DCDIAG comes back with all tests passed.
repadmin /replsum comes back with 0 fails and no errors largest delta for any intersite communication is 13min.
When I run Test-ReplicationHealth -Identity MAIL101 and also 102 they both come back as everything passed. No errors. -
Error when adding a disk to Cluster Shared Volumes
When adding a disk to Cluster Shared Volumes via Failover Cluster Manager, I get a couple of errors.
Event ID 5145 in System Log:
While adding the disk ('Cluster Disk 1') to Cluster Shared Volumes, setting explicit snapshot diff area association for volume ('\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\') failed with error 'HrError(0x8004230d)'. The only supported software snapshot
diff area association for Cluster Shared Volumes is to self.
Cluster disk resource 'Cluster Disk 1' failed to delete a software snapshot. The diff area on volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\' could not be dissociated from volume '\\?\Volume{420e2cc4-4fb4-41be-afb1-65f2ee62457a}\'. This
may be caused by active snapshots. Cluster Shared Volumes requires that the software snapshot be located on the same disk.
Any ideas why I'm getting this error? This disk was previously added as a CSV to different Windows failover cluster, if that matters. Thanks.Hi,
As the disk was previously used as a CSV, I assume there is still data on it.
Please check if any VSS snapshot created on that disk. If so, delete them and re-add it as a CSV to see the result - a quick way is to backup important files and perform a re-format if you cannot confirm.
If you have any feedback on our support, please send to [email protected] -
Error when adding a WLC to WCS
When adding a WLC to WCS I get this error: Failed to add device to WCS Reason:
COMMON-1: Some unexpected internal error has occured. If the problem persists please report to the Tech Support.
WCS 7.0.164.0 was upgraded from 5.2.110.0 because the WLC were running 7.0.98.0
WLC4404-100 7.0.98.0 (Already in WCS)
WLC4402-12 7.0.98.0 (Changed the ip address of the management and ap manager. Was in WCS but deleted from WCS prior to the ip address change and prior to the WCS being upgraded)
I know that the snmp strings are fine and that the WLC's both respond to snmp get commands.
The intial WCS upgrade from 5.2.110.0 to 7.0.164.0 didn't require the previous version to be uninstalled. After the upgrade and restoring the WCS from backup. I was getting the error posted above. We uninstalled WCS and re-installed WCS from scratch and still we are getting the same error. We tried restarting the WCS services and also the VM box as well and not luck. I was wondering if the WCS has the old ip and mac address of the WLC4402-12 in the database and that is why i'm getting this error.
I did delete and try different snmp community strings with no luck with WCS. Again, snmp is working since I can do snmp get from the WLC's.Scott,
This is the issue:
com.cisco.common.persistence.transaction.TransactionException: Null value was assigned to a property of primitive type setter of com.cisco.server.managedobjects.aaa.GuestUserTemplateCG.userStatus
Could be an existing bug or a new one. I cant say unless I look into your setup. -
Error when adding a schema to an existing workspace
I am trying to add an existing schema to my workspace, and am getting ORA-20001: Error with: GRANT EXECUTE ON DBMS_RLS TO BILLING ORA-01031: insufficient privileges. I tried logging in as sys and granting that privilege, and it worked. However, going back to the workspace, I still did not see the new schema listed.
The user and tables have all been created in the database. The BILLING schema showed up in the available schemas to add to the workspace. I have also tried adding a new schema to the workspace. The BILLING2 schema was created, but I received the same error when it tried to add it to the workspace.
Is there a grant or user that could be missing? I am using HTMLDB 2.0.
Thanks!These are the current privs for that user:
ALTER DATABASE
ALTER SESSION
ALTER USER
CREATE ANY CONTEXT
CREATE ANY DIRECTORY
CREATE CLUSTER
CREATE DATABASE LINK
CREATE DIMENSION
CREATE INDEXTYPE
CREATE JOB
CREATE LIBRARY
CREATE MATERIALIZED VIEW
CREATE OPERATOR
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TABLESPACE
CREATE TRIGGER
CREATE TYPE
CREATE USER
CREATE VIEW
DROP ANY DIRECTORY
DROP PUBLIC SYNONYM
DROP TABLESPACE
DROP USER
EXECUTE ANY PROCEDURE
SELECT ANY DICTIONARY
SELECT ANY TABLE
UNLIMITED TABLESPACE -
Hi
I keep getting this error "Index was outside the bounds of the array. (microsoft.SQLserver.Smo)" when adding a new database.
How can I fix this
ThanksHi,
What version of SQL Server are you on? What version of SSMS?
Thanks, Andrew
My blog... -
CRM 2013 error when adding a new appointment in Outlook.
When added
NEW DEADLINE The outlook on the calendar, I received an
error in CRM.
/////ERROR//////////////////////////////////////////////////////////////////////////////////////////
[2015-03-05 09:20:34.403] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(String message, Int32 errorCode) ilOffset = 0x5
at SecurityLibrary.RetrievePrivilegeForUser(IUser user, Guid privilege, ExecutionContext context) ilOffset = 0x14B
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context) ilOffset = 0x3D
at SecurityLibrary.TryCheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x42
at SecurityLibrary.CheckPrivilege(SecurityPrincipal principal, Guid privilege, ExecutionContext context) ilOffset = 0x0
at AddressManager.GetOwnerCandidate(AddressEntry addressEntry) ilOffset = 0x50
at AddressResolver.BuildResolvedAddressEntry(AddressCategory category, BusinessEntity businessEntity, Guid& objectId, Boolean active, String emailAddressMatched) ilOffset = 0x58
at AddressResolver.GetPrunedList(BusinessEntityCollection responseCollection, AddressCategory category, Hashtable removeDuplicateFilter) ilOffset = 0x6B
at AddressResolver.DoResolve(AddressEntry[] addressEntriesToResolve, Int32[] objectTypes, Boolean matchPartialEmailAddresses) ilOffset = 0x70
at AddressManager.ResolveEmailAddressInternalHelper(String emailAddresses, Int32[] objectTypeCodes) ilOffset = 0x1F
at CommunicationActivityServiceBase.ResolveUnresolvedParties(BusinessEntityCollection parties, Int32[] objectTypes, ExecutionContext context) ilOffset = 0x5C
at AppointmentService.Book(BusinessEntity entity, ExecutionContext context) ilOffset = 0x3D
at RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor) ilOffset = 0xFFFFFFFF
at RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments) ilOffset = 0x25
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) ilOffset = 0xCF
at LogicalMethodInfo.Invoke(Object target, Object[] values) ilOffset = 0x4F
at InternalOperationPlugin.Execute(IServiceProvider serviceProvider) ilOffset = 0x57
at V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context) ilOffset = 0x200
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
[2015-03-05 09:20:34.572] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Platform.Sdk |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | VersionedPluginProxyStepBase.Execute
ilOffset = 0x65
>Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at Microsoft.Crm.Extensibility.InternalOperationPlugin.Execute(IServiceProvider serviceProvider)
at Microsoft.Crm.Extensibility.V5PluginProxyStep.ExecuteInternal(PipelineExecutionContext context)
at Microsoft.Crm.Extensibility.VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context)
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
at System.Globalization.CultureInfo..ctor(Int32 culture)
at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.579] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Exception |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | CrmException..ctor
ilOffset = 0x7
at CrmException..ctor(String message, Exception innerException, Int32 errorCode, Boolean isFlowControlException) ilOffset = 0x7
at CrmException..ctor(Exception innerException, Int32 errorCode, Object[] arguments) ilOffset = 0xB
at VersionedPluginProxyStepBase.Execute(PipelineExecutionContext context) ilOffset = 0x65
at Pipeline.Execute(PipelineExecutionContext context) ilOffset = 0x6C
at MessageProcessor.Execute(PipelineExecutionContext context) ilOffset = 0x1C5
at InternalMessageDispatcher.Execute(PipelineExecutionContext context) ilOffset = 0xE4
at ExternalMessageDispatcher.ExecuteInternal(IInProcessOrganizationServiceFactory serviceFactory, IPlatformMessageDispatcherFactory dispatcherFactory, String messageName, String requestName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode,
ParameterCollection fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId, Guid transactionContextId, Int32 invocationSource, Nullable`1 requestId, Version endpointVersion) ilOffset = 0x16E
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, UserAuth userAuth, Guid targetUserId, OrganizationContext context, Boolean
returnResponse, Boolean checkAdminMode) ilOffset = 0x1F1
at OrganizationSdkServiceInternal.ExecuteRequest(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x2D
at OrganizationSdkServiceInternal.Execute(OrganizationRequest request, CorrelationToken correlationToken, CallerOriginToken callerOriginToken, WebServiceType serviceType, Boolean checkAdminMode) ilOffset = 0x26
at OrganizationSdkService.Execute(OrganizationRequest request) ilOffset = 0xD
at ilOffset = 0xFFFFFFFF
at SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) ilOffset = 0x241
at DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) ilOffset = 0x100
at ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) ilOffset = 0x48
at MessageRpc.Process(Boolean isOperationContextSet) ilOffset = 0x62
at Wrapper.Resume(Boolean& alreadyResumedNoLock) ilOffset = 0x1B
at ThreadBehavior.SynchronizationContextStartCallback(Object state) ilOffset = 0x0
at ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x70
at ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx) ilOffset = 0x4
at QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem() ilOffset = 0x0
at ThreadPoolWorkQueue.Dispatch() ilOffset = 0xA3
>Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
at System.Globalization.CultureInfo..ctor(Int32 culture)
at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
[2015-03-05 09:20:34.580] Process: w3wp |Organization:b5eb04f5-c174-e411-8f8d-0019990163cf |Thread: 28 |Category: Platform |User: 04b7d2dc-0428-e211-8585-000c29667e7c |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | MessageProcessor.Execute
ilOffset = 0x1C5
>MessageProcessor fail to process message 'Book' for 'appointment'.
[2015-03-05 09:20:34.581] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread: 28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertToFault
ilOffset = 0x69
>UNEXPECTED: no fault?
[2015-03-05 09:20:34.582] Process: w3wp |Organization:00000000-0000-0000-0000-000000000000 |Thread: 28 |Category: Platform |User: 00000000-0000-0000-0000-000000000000 |Level: Error |ReqId: 8b0e1332-9d32-456b-b953-aa5bfc9c1912 | ExceptionConverter.ConvertMessageAndErrorCode
ilOffset = 0x23B
>System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier.
> at System.Globalization.CultureInfo.InitializeFromCultureId(Int32 culture, Boolean useUserOverride)
> at System.Globalization.CultureInfo..ctor(Int32 culture)
> at Microsoft.Crm.Common.BusinessEntities.AppointmentConflictNotificationGenerator.AddNotifications(NotificationAdder notifications, ErrorInfo[] errorInfoArray, CrmResourceManager crmResourceManager, IOrganizationContext context)
> at Microsoft.Crm.Common.ObjectModel.AppointmentService.Book(BusinessEntity entity, ExecutionContext context)
/////END ERROR//////////////////////////////////////////////////////////////////////////////////////////
And then the
date of the duplicates in the calendar
in Outlook and CRM.
My version CRM 2013 -
6.1.2.112
Crm2013wasthemigratedfromthe
2011 version.
Does anyone have any idea how to
solve it.I checked it, these errors
occur on all users. Below
the main errors that occur.
Crm Exception: Message: SecLib::RetrievePrivilegeForUser failed - no roles are assigned to user. Returned hr = -2147209463, User: ed2ef8c8-69db-e311-9816-0019990163cf, ErrorCode: -2147209463
Web Service Plug-in failed in SdkMessageProcessingStepId: {E4C9BB1B-EA3E-DB11-86A7-000A3A5473E8}; EntityName: appointment; Stage: 30; MessageName: Book; AssemblyName: Microsoft.Crm.Extensibility.InternalOperationPlugin, Microsoft.Crm.ObjectModel, Version=6.0.0.0,
Culture=neutral, PublicKeyToken=31bf3856ad364e35; ClassName: Microsoft.Crm.Extensibility.InternalOperationPlugin; Exception: Unhandled Exception: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation.
Inner Exception: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.Globalization.CultureNotFoundException: Culture is not supported.
Parameter name: culture
0 (0x0000) is an invalid culture identifier.
MessageProcessor fail to process message 'Book' for 'appointment'.
System.Globalization.CultureNotFoundException: Microsoft Dynamics CRM has experienced an error. Reference number for administrators or support: #895E889A: System.Globalization.CultureNotFoundException: Culture is not supported.
>Parameter name: culture
>0 (0x0000) is an invalid culture identifier. -
Gettin a portal runtime error when adding iviews in web page composer
we are getting the Following error when we try to add a iview in page builder .we have done the configurations as per the documentation ((http://help.sap.com/saphelp_nw70/helpdata/en/45/3fe7b4f34d4a18e10000000a114a6b/frameset.htm).and will appreciate any help on this issue .
Portal Runtime Error
An exception occurred while processing your request
Exception id: 08:09_31/10/07_0015_15308650
See the details for the exception ID in the log file.
#1.5 #00145ECC9C67007E000000190000117800043DC0D68F6E39#1193798349688#com.sap.portal.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#myadmin#5872##myportalci.keells_JPP_15308650#myadmin#015ef900875a11dc8a3700145ecc9c67#Thread[PRT-Async 2,5,PRT-Async]##0#0#Error##Java###08:09_31/10/07_0015_15308650
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: Can&\#39;t read the prameter &\#39;siteString&\#39; from the PCD.
at com.sapportals.portal.httpconnectivity.urliviews.runtime.URLIView.checkPCDVal(URLIView.java:631)
at com.sapportals.portal.httpconnectivity.urliviews.runtime.URLIView.readFromPCD(URLIView.java:528)
at com.sapportals.portal.httpconnectivity.urliviews.runtime.URLIView.doContent(URLIView.java:326)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:149)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:355)
at com.sapportals.portal.prt.core.async.AsyncPortalComponentResponse.include(AsyncPortalComponentResponse.java:310)
at com.sap.nw.wpc.runtime.AbstractContainerComponent.doContent(AbstractContainerComponent.java:88)
at com.sap.nw.wpc.runtime.ContainerComponent.doDesign(ContainerComponent.java:183)
at sun.reflect.GeneratedMethodAccessor362.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:134)
at com.sapportals.portal.prt.component.CachablePortalComponent.service(CachablePortalComponent.java:273)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable$1$DoDispatchRequest.run(AsyncIncludeRunnable.java:375)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.core.async.AsyncIncludeRunnable.run(AsyncIncludeRunnable.java:388)
at com.sapportals.portal.prt.core.async.ThreadContextRunnable.run(ThreadContextRunnable.java:164)
at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:729)
at java.lang.Thread.run(Thread.java:534)Dear Prabash Balsuriya,
I got similar issue while adding iView to WPC during public, can you elaborate how you solve this issue?
Thanks.
Regards,
Weng
Maybe you are looking for
-
i already verify my app id but when i signed in my apple id it is still need to verify?? i try to verify again but when i click verify now then it said i verified it already but when i signed in it again..... it still need to verify. what should i do
-
New install not accessing existing library on D: drive.
My iTunes library is much larger than my entire SSD I use as a boot volume, so of course I keep it on a second internal hard drive labeled D:. I just had my system corrupted and all backcup images not read by restore discs, so I had to wipe my C: SSD
-
Javascript that ran in 2.0 no longer works in 2.1
There is some javascript that ran in safari 2.0 (412) that no longers works in 2.1 (419.3). Essentially, it should be a text field that has all of the text inside selected. Below is a simple code example (note: this javascript was generated with VBSc
-
Photoshop CS4 error since Mavericks when open file from Server: "file is empty"
Since I upgraded to Mavericks I can't open files directly from a Server (smb://..), it says "file is empty". When I copy the PSD file to my local drive I can open it though. I tried already to remove the server and reconnect. I'm using the CS4. Any i
-
Need Help with ACTIONSCRIPT for Interactive Music Video
I am trying to create an interactive music video in After Effects and Flash. The concept is that while the music video is taking place the user can decorate the hair of the woman with any of the objects they select. There will be predetermined ani