Error when copying a table
SQL-developer 4 EA2
When copying a table to a name which already exists (as a procedure) SQL-developer replies that the copy- process took place although it didn't.
You do not get the error message ORA-00955 "name already exists"
regards
If the error is on your mac computer, launch Keynote, then click the word "keynote" beside the apple, and select to "provide Keynote feedback"
If on an iOS device, go to www.apple.com/feedback and provide feedback from this web site
Similar Messages
-
Keynote has unexpected error when copying a table- how do I report this?
I looked for a place to send a report of this error in Keynote 09, but can't find the place to do so. Seems a simple operatoin like this should not cause a fatal error.
If the error is on your mac computer, launch Keynote, then click the word "keynote" beside the apple, and select to "provide Keynote feedback"
If on an iOS device, go to www.apple.com/feedback and provide feedback from this web site -
Error ODS activation - sql error when accessing a table.
Hi,
sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
-RSMPC 128, datapacket 3 is wrong, with status number 9
-RSMPC 131
-RSDRO 108 - communcation error (sql error when accessing a table)
In sm21>
-sql error when accessing a table
-The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
either caught nor passed along using a RAISING clause, in the procedure <b>"UPDATE_ATAB"</b> "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
I have BW 3.5.
Thank You very much.There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource. You seem to indicate that you don't have this.
Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
You could be loading from two different datasources to the ODS at the same time.
If any of these are true, I would look at bumping the INITRANS setting up. Your DBA will probably need to do this for table and its indices. There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered.
You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps.
Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
Pizzaman -
Internal error when accessing a table -
Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
ThomasThese are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8 dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM -
SM58 : Internal error when accessing a table
Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
ThavaHi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli -
ORA-00054 error when loading Oracle table using Data Services
Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Mariethe ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright. -
4.0 EA3 - Data Default not duplicated when copying a table
I noticed that when copying a table from one schema to another, if a column has a data default property it is not preserved.
Steps to recreate:
Copy a table that has at least one column with a non-null DATA_DEFAULT property (right click on table -> table -> copy)
Double click on the new table, and open the Columns tab. Notice that all values under DATA_DEFAULT are null.The same behavious exists in 3.2.20.09 and whether the table has existing data or not.
-
how do I keep format when copying a table to keynote? paste and match style does not keep format
It used to work until recent updates and it is very frustrating.....I hope someone out there knows how to deal with this.
-
Error when copying update rules!!!
Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNKHi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK -
FM 10 - Serious Internal Error When Copying/Pasting
We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!
We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.
-
! Error when copying song from Purchased to IPod play list. How to fix?
! Error when copying song from Purchased to IPod play list. How to fix?
Hi
Try the iPod for windows forum http://discussions.apple.com/forum.jspa?forumID=826
Tony -
Help! illustrator error! I did a runtime error when copying
Help! illustrator error! I did a runtime error when copying!
I 'm using cs5Nobody can tell you anything without proper system info or other technical details like the exact error message.
Mylenium -
System error: Error when copying parameter function group CR01
Dear friends
I am getting the above error while doing the Backflushing in REM.
It occurs when backflushed quantity is issued ,and while confirming the
ACTUAL ACTIVITES above error occurs..........
We have upgrade the system from SAP 4.7 to ECC6.0.
It is giving some error in CRM system but we don't have CRM system.......
Message displayed is as below..................
System error: Error when copying parameter function group CR01
Message no. CR085
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your ERP
System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the
error cannot be corrected, call the SAP Hotline directly. Describe which
steps preceeded the error.
Thanks& Regards
Sandeep
Message was edited by:
Sandeep BhowmickHi Sandeep
Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
Regards
Prasad
Reward if useful -
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE
제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK. -
Using IDCS3 I created a master table and exported as xml. Created a working ID file and copied the table over so structure was duplicated with all elements. Deleted some rows I didn't need and made some text changes in the master table.
According to the manual, when merging the tables, the source should ignore elements that are no longer there and update the text in the remaining cells.
Tried to update the xml by updating the link but get an error "Cells too small to split".
I'm new to xml so any advice would be appreciated.
Regards,
GerryIt appears that ID can't change the cells or rows in a table, although it can change the content. The only solution is to change the table to text and modify the elements that way. The solution removes some flexibility in using tables to manage data.
Regards,
Gerry
Maybe you are looking for
-
How can I call a Page Process from the Select statement for Report Page
I'm able to call a javascript using the below: img src="#IMAGE_PREFIX#add2.gif" border="0" alt="Icon 4" onClick="javascript:add_connect1('||CPORT.ID||')" But Now, I'd like to accomplish (2) New things: 1. instead of using,....... onClick="javascript:
-
ADF 11g Taskflows and PageFlow Scope.
Hi, I am working in ADF11g and I have a question on ADF Taskflows and PageFlow Scopes. I have 2 bounded taskflows a and b. a is in showdetailitem1 and b in showdetailitem2. I have created a bounded taskflow on a and b and dropped on a page.I have som
-
Want to construct insert statement from all_tab_columns
I am using Oracle 10GR2 and a new user for plsql I want to write a plsql block or SQL in order to insert some dummy data. I want to use the column list from all_tab_columns and want to construct insert statement EX: I am trying to construct SQL as be
-
hi, system showing error message MRP parameters are not assigned to plant in tcode md04 pl suggest
-
no tool bar no drop down menu no help on line no phone support ... impossible to use ... and let me not forget is no improvement at all over Ps Elements 12 difficult to use and overall project file is TOO LARGE and difficult (ergo, impossible) to man