Error when Creating a delivery for an STO DEL

I have a client that at first was getting an error about shipping point can not be determined. I extended the sales view, and also created the Sales Org and division. When I created the delivery it worked. Then when the client tested this, it did not work gets the error message when trying to create the delivery in VL10B that states Document is incomplete. You can not save delivery. Then I went to the material master and checked the settings on the sales org and sales division..for whatever reason it was not there, so I repopulated the information...It worked and went all the way through. Now today...it gives me the same error message and the sales org division and everything is there. I can not create a delivery. Any information or clue would be greatly appreciated. I am testing all with the same material number, same plants, same info....

Unfortunately I did not see anything in this note that would help it appeared to be talking about IM and QM.
I do agree there is some inconsistencies and I am just not sure where....None of this makes any sense as I said one day it will work and then the next time you try it, it gives the error message....I am so at a lost at this point...

Similar Messages

Error when creating document flow for delivery

Hi,
I would like to post the GR for Inbound delivery. I receive an error the TO is not confirmed. I have tried to confirm the tranfer order and I receive the "error when creating document flow for delivery . In order to avoid inconsistencies the goods movement posting was cancelled." It seems like the document already exist.
How can I do to confirm the TO and post the GR.
Thanks
Dede

In Inbound delivery after GR only a TO is created and confirmed.
So please check the PO history and see a GR is there or not .
Once a GR is found create a TO and do the confirmation

Error while creating the delivery for STO

Hi,
While creating the delivery, an error is produced when i saw the log . It was as follows
"An Item with no delivery quantity is not permitted. Item will be deleted"
Its related to STO,. if STO contains around 100 items and error is for any single item system is not able to create the delivery for whole PO.
Please guide as its an vey urgent issue will reward with suitable points.
Regards,
Vikram

Hi
while creating delivery make that particular material's delivery quantity as 0. and do not enter any picking quantity.
that material will not be consider while making delivery.
Regards,
vijay

Sharepoint 2013: Problem / Error when creating Variation Hierarchy for French and German Languages from Variation root EN

Hi,
I have a website with English and Arabic Language Packs installed. I have the corresponding Variation heirachies created and the whole site collection is published.
Recently the client asked for french and german languages to be accomodated as well. So I followed the same approach I did for English and arabic (installed the language packs) for foundation, ran ocnfiguration wizard, installed server language pack &
ran configuration wizard.
But after creating the variation label, when i try to create the variation heirarchy, I am getting the following error.
"Unknown failure when creating a variation of page http://server:port/en/pages/default.aspx in label /fr/Pages/default.aspx.
The Variations Create Hierarchies job failed with the following error message& Unknown failure when creating a variation of site
http://server:port/en in label fr."
Am not sure what is going wrong. Appreciate a feedback.
Thanks,
SSP
SSP

Hi,
According to your description, my understanding is that the error occurred when you created the Variation Hierarchy for French and German Languages from Variation root EN.
I recommend to check the Resources folder located at C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15 to see if the file core.fr-FR.resx exists in the folder.
Here is a similar thread for you to take a look:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/611575b2-d129-44c6-814b-2e5782178850/unknow-failure-when-creating-variations-in-sharepoint-2013-is-this-a-bug-in-sharepoint-2013-rtm?forum=sharepointadmin
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Error when creating ssh keys for Oracle RAC on Solaris 10

I'm in the process of configuring 2 node oracle cluster running on Sun cluster 3.2 /solaris 10 OS.
I have followed this oracle guide to when creating keys (oracle document No =B14205-01)
But im having problem when executing this step
bash-3.00$ scp authorized_keys tsavo-east:/oracle/.ssh/
ssh: connect to host tsavo-east port 22: Connection timed out
lost connection
bash-3.00$
Please advise
Thanks
Francis Mwangi

Robert Thanks alot for your reply. have a look of what i found out
ps -ef | grep sshd
root 4270 4267 0 16:22:46 ? 0:00 /usr/lib/ssh/sshd
root 759 1 0 Nov 09 ? 0:00 /usr/lib/ssh/sshd
root 4267 759 0 16:22:41 ? 0:00 /usr/lib/ssh/sshd
root 4372 4311 0 18:56:52 pts/3 0:00 grep sshd
===================================
netstat -a | grep ssh
*.ssh *.* 0 0 49152 0 LISTEN
tsavo-west.ssh 10.30.210.213.2241 63668 51 49640 0 ESTABLISHED
*.ssh *.* 49152 0 LISTEN
6002b4aec88 stream-ord 6002b5a0740 00000000 /tmp/ssh-mgPl3398/agent.3398
==============================
telnet tsavo-west 22
Trying 10.20.3.151...
Connected to tsavo-west.
Escape character is '^]'.
SSH-2.0-Sun_SSH_1.1.1
#has hanged here for the last 10 minutes
Thanks please what can you conclude from above; also from the console monitoring both nodes
i saw messages that end with
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to up
#another line here
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to down
#another line here
LINK-3-UPDOWN: Interface Dot11Radio0 , Changed state to up
this happens on both nodes
Any idea
did i use the right document. have other steps that works (anyway not sure if this error are related to the stepsfor configuring ssh)
Please help if you can ....

Error when creating a bdc for asset master upload

I am getting a warning message (AA186), when changing the depreciation start date to capitalization date. It says,
"Different Order Dep. start date in depreciation area 01. Check"
This error is a problem in creating the BDC for asset master upload. We have only one depreciaton area 01 (book dep).
Please help.

This is normal message you get when you try to change depn start date. I think this should not be a problem for BDC posting. This message can always be bypassed.

Error when creating BIA INDEX FOR CUBE

Hi
I am trying to create BIA index for a cube and I am getting error
"An error occurred. Choose "Continue" to start again from the beginning" in the second step. Could any body explain what this error mean and How to correct it.
and when I press BIA Moniter tab I am getting following message.
An error occurred. Choose "Continue" to start again from the beginning
"BIA Monitor Is Called for First Time
The RFC destination for the BI accelerator is not yet specified in the
system. Without the relevant entry in RSADMINA, the BIA monitor cannot
be executed. Do you want to enter the RFC destination now?"
Thanks in Advance
Sarath
Edited by: sarath kumar on Aug 21, 2008 9:42 AM

Hi,
Is there any way i can check bi accelerator installed or not for our bi server.I contacted basis team but they do not have any idea regarding this. but I heard from my ex colleage it is installed. and Reports from one cube is running very fast compared to recently created cube.
Thanks
Sarath

Inbound delivery - Error when creating document flow for delivery #########

Hello all:
When attempting to PGI an inbound delivery (via VL06I - For Goods receipt - select inbound delivery - click Post Goods Receipt) I received error messgae VL 659:
Diagnosis
As the system was recording the document flow for the goods movement, it determined that the subsequent document number is either blank or identical to the number of the preceding document.
System response
In order to avoid inconsistencies, the goods movement posting was cancelled.
All WMS transfer orders tied to this inbound delivery are complete. This hasn't happened with any other delivery. Any suggestions as to what I can do?
Thanks,
Bill

Hi,
I would suggest you to go trough OSS notes using the error message number as search key (e.g. 352243, 645119, 197864).
If you fail to find any maybe it would be worth of contacting SAP AG.
Regards,
Csaba

Error when creating inbound delivery - insufficient quantity

Hello all,
after creating a purchasing scheduling agreement (ME31L), I want to create an inbound delivery (VL31N).
But when saving the inbound delivery, I get the following error message:
Insuff stk qty ( 0.000) for line item000001
The stock for the material on the scheduling agreement is empty. But why does it not let me do an inbound delivery?
Thanks
Anne

In the config of Define Internal Confirmation Categories
is
2 shipping notification is assign to 10 or LA if it LA than it will allow you to create the inbound delivery
The delivery is created in my system
i got message
Notified quantity exceeds quantity still to be notified 15.000- CS Message no. ME160
but it is warning not error.

Error when creating transport request for transfer rules

Hi
When we are creating the transport request it is giving the Warning 1."source system are not transported.
     Error 2." you can't use request BQAK900164
     Error 3."object ISTS Zevkkn_bb could not be saved
               to order BQAK900164.
This is very urgent.
Please reply soon.
Thanks in Advance,
Regards
Pankaj Angra

Hi,
Did you replicate the data source?. That could be the problem or there might be problem you have set up the source system on your BW system
make sure that the source system names are mapped from your R/3 dev to your R/3 QA. This is done on the BW QA (target system) RSA1 => Tools => mapping of source system names. make sure your entries are there for the logical system names of your dev to qa.
Then in the BW dev, when selecting the trasnfer rule make sure to select the appropriate source system. (souce system icon in tool bar)
Do u hav 2 Source sys ?
-Shreya

Namespace not found error when creating data server for xml with namespace

Hi
I tried creating XML data server in ODI with namespace in xml file. I followed the below steps but could not success in creating the dataserver. however when I remove the namespace in xml file I am able to reverse engineer the xml file.
1) Create xml data server
2) select xml driver - com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
3) Provide the jdbc url - jdbc:snps:xml?f=D:/xmlnew/sample_namespace.xml&s=xmlns&d=D:/xmlnew/sample_namespace.dtd
xml content
<f:root xmlns:f="http://www.w3.org/TR/html4/">
<table>
<name>African Coffee Table</name>
<width>80</width>
<length>120</length>
</table>
</f:root>
DTD content
<!ELEMENT f:root ( table ) >
<!ELEMENT length ( #PCDATA ) >
<!ELEMENT name ( #PCDATA ) >
<!ELEMENT table ( name, width, length ) >
<!ELEMENT width ( #PCDATA ) >
when I test connection it shows the following error.
java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:133)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java:1100)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.getLocalConnect(SnpsDialogTestConnet.java:371)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.localConnect(SnpsDialogTestConnet.java:794)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.jButtonTest_ActionPerformed(SnpsDialogTestConnet.java:754)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.connEtoC1(SnpsDialogTestConnet.java:137)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet.access$1(SnpsDialogTestConnet.java:133)
     at com.sunopsis.graphical.dialog.SnpsDialogTestConnet$IvjEventHandler.actionPerformed(SnpsDialogTestConnet.java:87)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:272)
     at java.awt.Component.processMouseEvent(Component.java:6289)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6054)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4652)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4577)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4482)
     at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:644)
     at java.awt.EventQueue.access$000(EventQueue.java:85)
     at java.awt.EventQueue$1.run(EventQueue.java:603)
     at java.awt.EventQueue$1.run(EventQueue.java:601)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
     at java.awt.EventQueue$2.run(EventQueue.java:617)
     at java.awt.EventQueue$2.run(EventQueue.java:615)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:614)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.sql.SQLException: The model generated by the model mapper was not accepted by a validator: Model not accepted: Namespace not found:
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:389)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.initialize(SnpsXmlDTD.java:421)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDTD.<init>(SnpsXmlDTD.java:150)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchema.<init>(SnpsXmlSchema.java:478)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.createNewSchema(SnpsXmlSchemaManager.java:292)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlSchemaManager.getSchemaFromProperties(SnpsXmlSchemaManager.java:270)
     at com.sunopsis.jdbc.driver.xml.SnpsXmlDriver.connect(SnpsXmlDriver.java:114)
     at oracle.odi.jdbc.datasource.DriverManagerUtils$DriverProxy.connect(DriverManagerUtils.java:23)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:368)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:352)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:316)
     at oracle.odi.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:275)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.doGetConnection(LoginTimeoutDatasourceAdapter.java:99)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter.getConnection(LoginTimeoutDatasourceAdapter.java:62)
     at oracle.odi.jdbc.datasource.LoginTimeoutDatasourceAdapter$ConnectionProcessor.run(LoginTimeoutDatasourceAdapter.java:217)
     at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)
     at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)
     at java.util.concurrent.FutureTask.run(FutureTask.java:138)
     at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)
     at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)
     at java.lang.Thread.run(Thread.java:662)

Hi,
Thans for your reply.
This is the DTD for my xmldoc.
<!ELEMENT Data (Department+)>
<!ELEMENT EmployeeID (#PCDATA)>
<!ATTLIST EmployeeID col (EMPID) #IMPLIED>
<!ELEMENT Education (EmployeeID, Sequence, Dgree)>
<!ATTLIST Education table NMTOKEN #IMPLIED>
<!ELEMENT Employee (EmployeeName, EmployeeID, DepartmentID, Education*)>
<!ATTLIST Employee table NMTOKEN #IMPLIED>
<!ELEMENT EmployeeName (#PCDATA)>
<!ATTLIST EmployeeName col NMTOKEN #IMPLIED>
<!ELEMENT DepartName (#PCDATA)>
<!ATTLIST DepartName col NMTOKEN #IMPLIED>
<!ELEMENT Table (Column+)>
<!ATTLIST Table importType NMTOKEN #IMPLIED>
<!ATTLIST Table parentTable NMTOKEN #IMPLIED>
<!ATTLIST Table tag NMTOKEN #IMPLIED>
<!ATTLIST Table columns NMTOKEN #IMPLIED>
<!ATTLIST Table name NMTOKEN #IMPLIED>
<!ELEMENT DepartID (#PCDATA)>
<!ATTLIST DepartID col NMTOKEN #IMPLIED>
<!ELEMENT MetaData (Table+)>
<!ELEMENT Sequence (#PCDATA)>
<!ATTLIST Sequence col NMTOKEN #IMPLIED>
<!ELEMENT Dgree (#PCDATA)>
<!ATTLIST Dgree col NMTOKEN #IMPLIED>
<!ELEMENT Export (MetaData, Data)>
<!ELEMENT DepartmentID (#PCDATA)>
<!ATTLIST DepartmentID col NMTOKEN #IMPLIED>
<!ELEMENT Column (#PCDATA)>
<!ATTLIST Column deleteKey NMTOKEN #IMPLIED>
<!ATTLIST Column isKey NMTOKEN #IMPLIED>
<!ELEMENT Department (DepartName, DepartID, Employee+)>
<!ATTLIST Department table NMTOKEN #IMPLIED>
Thanks again!
Yan

405 error when created a servlet for Recalculate form button

hello, if anyone can help me out. I'm doing a school project that is a (Apache Tomcat Server) website that allows customers to buy music cds.(no it does not really go to a Service) i am having trouble with the recalculate form button. I have a form button created in a page called CartDetails.java and i use outstring to convert these lines <form method='POST' name='recalc' action='Recalculate'> and <input type='Submit' name='recalc' value='Recalculate'> into html code so tomcat will see it as html and not java. I have also made a doGet method inside another page called Recalculate.java to request the data i need from the database. this is part of the code(in Recalculate.java).
protected void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
HttpSession session = request.getSession();
Music.Customer custbean = (Music.Customer)session.getAttribute("customer");
yes, I have done all the calculations.(my teacher gave them to me). I have also created the servlet in the web.xml file properly. the problem is that it gives me a 405 error saying HTTP method POST is not supported by this URL when the recalculate form button is pressed.
please help. thanx

I did change it to doPost and it gave me the same error message. my teacher told me to put in a doPost method right underneath the doGet method(the doPost would do exactly what the doGet does in my program). but that would mean i would have to open two sessions. this is my whole program. i am almost positive the problem is here. Everything else is done right. /*
This servlet recalculates the total of the cart. those items which quantities are 0 will be deleted from the
cartdetails table. This version calls on CartDetails servlet to finish the job. Commented segments below were in
RecalculateCart
package Music;
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
import Music.DBI;
import Music.Customer;
import Music.Control;
import java.text.NumberFormat;
public class Recalculate extends Music.Control {
String CustomerID;
protected DBI dbi; // i also used do Post here....same result.
protected void doGet(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
HttpSession session = request.getSession();
Music.Customer custbean = (Music.Customer)session.getAttribute("customer");
dbi = custbean.getDBI();
try {
java.util.Enumeration paramNames = request.getParameterNames();
while(paramNames.hasMoreElements())
String paramName = (String)paramNames.nextElement();
this.dbi.printItem(paramName);
// String[] paramValue = request.getParameterValues(paramName);
/*ParamValue is the ID of the item */
String paramValue = request.getParameter(paramName);
this.dbi.printItem("Item = "+paramName+" Number of Items = "+paramValue);
int qty = Integer.parseInt(paramValue);
if (qty == 0)
/* delete record form cartdetail */
this.dbi.deleteItem(Integer.parseInt(custbean.getCartId()),Integer.parseInt(paramName));
else
/* update record with the paramValues as quantity */
this.dbi.updateItem(Integer.parseInt(custbean.getCartId()),Integer.parseInt(paramName),qty);
} // end while
catch(Exception e)
e.printStackTrace();
gotoPage("/CartDetails", request, response);
} // end do Post
} // end class

Error when Create Cost Estimate for Material using CK11

Dear Experts,
I have a material ABCD which is FOC parts:-
1) Procurement type: F
2) Special procurement type: Z (at first, it was wrongly entered as B. I changed special procurement to Z & the message 'The procurement type of the special procurement type is E' displayed but I still can save & system allowed it).
3) Standard price is 0.00 as this is FOC.
Firstly, I run CK11 for material EFGH which is the parent of material ABCD.
This time, the material ABCD has special procurement type B. I received error messages:
1) No price could be determined for material ABCD in plant xyz,
2) Cost component split costed with value of zero,
3) Cost estimate for material ABCD in plant xyz is incorrect.
Then, I changed special procurement type for material ABCD from B to Z and run CK11 again. Still the same error occurred.
Could someone advise me how to run CK11 without errors.
Thanks in advance!

I don't know if B and Z are really the name of your special procurement keys or you are just using them as examples. Either way, the special procurement key is critical for determining how your material is valued. It is used for such things as stock transfer from other plant, subcontracting, and consignment processes. Can you tell me how these special proccurement keys are set or what you want to use these keys for. You can find the configuration for these key under menu path Controlling - Porduct cost controlling - Product cost planning - Material cost estimate with quantity structure - Settings for quantity structure control - Master data - Check special procurement types.
thanks,

Error occuring while creating a Delivery for Stock transport order

Hi,
I am getting error while creating the delivery for thr stock transport order.The error message is given below.
                                                                                Error Log for coll. run 0001248218
4       6000038321 000010 Only 0 ST of material F784100 available
     4       6000038321 000010 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000020 Only 0 ST of material F784100 available
     4       6000038321 000020 An item with no delivery quantity is not permitted. Item will be deleted.
     4       6000038321 000030 Only 0 ST of material F784100 available
     4       6000038321 000030 An item with no delivery quantity is not permitted. Item will be deleted.
The stocks are present in the plant.
Can anyone help me to solve this issue?
Thanks
Srinivasan

Hi,
Check in
SPRO--IMG-MM-IM and PI---stock determinationassign stock determination in applications---Inventory management
Check for 641 or 647,there is a SD rule assigned.
Regards,
Deepak.

Error while posting Goods Issue for an STO

Hi All,
I have created a Stock Transport Order for Plant A to Plan B and when I go to transaction VL10D and try to create a delivery for my STO then it gives the following error message
ARun type does not exist
Message no. 8J103
How do I overcome this.

Please read OSS note 1287602.

Error when Creating a delivery for an STO DEL

Similar Messages

Maybe you are looking for