Error when creating a request Template In OIM

Hello all,
I have a very strange issue with OIM, it is when I try to create a request template, and put a restriction in Organization field, it creates the template and everything is fine. Suddenly, when I try to edit this template, the OIM shows a window with the next error:
ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
I have found in other posts the "solution", It is to change in the database -> RequestTemplate Table -> Template Data Column, the restriction Organization from "the name of the organization" to "the Id of the organization", and restart the OIM, so after that, I can edit the template.
Here is the issue that I don't understand,... few hours after, I want to edit the same template, and the OIM again shows the same error:
ADF_FACES-60096:Server Exception during PPR, #5 oracle.iam.platform.utils.MinLimitException: size < minimum limit
And if I review in the database the table, in the Template Data Column, the restriction of Organization has AGAIN the "Name of the organization".
And I can again change that to the "Id of the organization", but it's time lost restarting the OIM. Time that I don't have, because Its more than one template.
Please somebody could help me with this issue.

Hello,
I already found the solution to this issue.
I had to restart the OIM server but also the DataBase and after that, this problem was solved.
Thanks anyway.

Similar Messages

  • Error when creating Travel request

    Hi all,
        I am encountering error "Percentage is too high" when creating a travel request. When i tried to change the cost centre to split into different entries.
    Ex: 1) 10 %   cost centre1
          2) 40%    cost centre2
          3) 50%    cost centre2
    when i try to save the request i encountered error with "Percentage 90% is too high" as the first entry is reverting back to the initial entry before modification(initial entry is 100% with cost centre1) it is reverting back the first entry as 1) 100 %   cost centre1 that means now the entries are becoming
    Ex: 1) 100 %   cost centre1
          2) 40%    cost centre2
          3) 50%    cost centre2
       altogether 190% so throwing an error with "Percentage 90% is too high" as the total percentage is more than 100%.
    Can you please help in resolving this issue.

    hi,
    see this link
    Percentage Overhead Rates are not capture with Transport request
    refer this link to know how to create travel reaquest
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51f0e994b85e40e10000000a11466f/content.htm
    http://help.sap.com/saphelp_45b/helpdata/en/b6/cdaab649e911d189060000e8322f96/frameset.htm
    thanks

  • Error when creating project from template

    I'm getting an error when i try to create a project from template. It's the same error no matter which template i select.
    WebIDE: 1.9.3.1
    Is there a new setting i missed or...?

    Henrik Damhøj Andersen
    Problem has been resolved. Please check again.
    Regards,
    JK

  • Error when creating transport request in 000 clinet

    Hi All,
    I am getting the below message when creating a transport request manually in 000 client
    Requests can only be created from ChaRM!
    Message no. 38001
    How can I deactivate charm for short time and then activate it again?
    Please let me know your suggestion.
    Thanks
    Amair

    Hi Sanjai,
    Thanks for the quick response.
    But I think it will disable charm process for the entire landscape. What we need to do if we want to disablke for particular system like one development system?
    Thanks again
    Amair

  • Error when creating transport request in Charm for Portal

    Hello Guru's,
    I'm configuring ChaRM for our Portal environment using CTS+
    When I create a transport request I get the following error message:
    Parameter EPD not in version of tp configuration.
    Any thoughts????
    Regards,
    David

    Hello David,
    Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
    1107361 - Migration BAdI-Implementation Error Message XT 465
    45548   - Transporting language-dependent objects
    Hope this helps you out!
    Thanks,
    Mark

  • Error when creating transport request for transfer rules

    Hi
    When we are creating the transport request it is giving the Warning 1."source system are not transported.
         Error  2." you can't use request BQAK900164
         Error  3."object ISTS Zevkkn_bb could not be saved 
                   to order BQAK900164.
    This is very urgent.
    Please reply soon.
    Thanks in Advance,
    Regards
    Pankaj Angra

    Hi,
    Did you replicate the data source?. That could be the problem or there might be problem you have set up the source system on your BW system
    make sure that the source system names are mapped from your R/3 dev to your R/3 QA. This is done on the BW QA (target system) RSA1 => Tools => mapping of source system names. make sure your entries are there for the logical system names of your dev to qa.
    Then in the BW dev, when selecting the trasnfer rule make sure to select the appropriate source system. (souce system icon in tool bar)
    Do u hav 2 Source sys ?
    -Shreya

  • Error when creating files for transport request SAPK-700BGINPLMWUI

    Hello experts,
    We're upgrading our 46c System to ERP 6.0 EHP4.
    In Phase  EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
    We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems  O.K.
    Any help would be really appreciated!!!
    Complete Error message:
    EhP component PLMWUI, 700                                                                               
    Looking for SAINT package for 'PLMWUI' ...                                                                               
    R3upReadNewPackages:                                                                               
    patchType='U', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    ... No matching package found.                                                                               
    R3upReadNewPackages:                                                                               
    patchType='I', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'                                  
    ... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'                                                             
    (trc) R3upPatchDisassembleQueue: 1 package queue entries                                                                    
    (trc) R3upPatchDisassembleQueue: force=YES                                                                               
    (trc) R3upPatchDisassembleQueue: 1 packages will be disassembled                                                            
    Starting disassembling package queue                                                                               
    Date & Time: 20100319133139                                                                               
    Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"                                           
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC                                                                     
    Input table IT_PATQ:                                                                               
    "SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"                                                       
    Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded                                                           
    Logging off from SAP system                                                                               
    Date & Time: 20100319133139                                                                               
    Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

    Hello Anthes,
    Please Check the things in following sequence :
    1.Use latest SAPehpi, R3trans and tp versions.
    2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
    Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
    3. Source file corruption can be ruled out by execution
    R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
    Note 2050
    4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
    5. Try to update the kernel if it not helps.
    Best Regards
    Niraj

  • Error when creating a folder ,iviews in the portal

    Dear sap gurus ,
    I m facing a error when  creating a   Folder or an iview in my portal i'm using EP 7.0 sp11 ,The error is :
    Portal Runtime Error
    An exception occurred while processing a request for :
    <b>iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
    Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
    SQLException is not transient, error code = 1654, sql state = 72000 Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:259) at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:518) at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:544) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1374) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1128) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1087) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:843) at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:190) at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:191) at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:254) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:147) at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:440) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:624) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:619) at com.sap.portal.admin.wizard.folderwizardpanes.SavePane.doAfterSubmit(SavePane.java:59) at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:356) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99) at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) .
    Exception id: 10:50_23/11/07_0005_16892850
    See the details for the exception ID in the log file</b>
    Thanks and Regards,
    sathya

    Hi Sathya
    The following line in your log tells you what is wrong:
    ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB
    This is a configuration that you or the dba people need to do. The first thing I would check is if autoextend is on/off on your tablespace PSAPSR3DB. If it's 'off' you either need to put it to 'on' or manually extend the size of your tablespace depending on how much harddrvive space you have to play with. Here is a more detailed solution on how to do it:
    Oracle Error : ORA-01654: unable to extend index string.string by string in tablespace string
    Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
    Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
    Br
    Göran

  • Unable to Create Service Request Template in CRM

    Hello,
    I need to create a service request template in crm web ui,
    Following are the steps followed.
    I have identified the transaction type as SRQT screen shot attached below
    However when I click on on the work center link groups of the service pro role, I am not able to find the same for the service request template
    As per the post below it says that you need to go navigation bar profile and add the SM-SUPPORT work center and the work center link group as SM-SRQT-CR
    How to customize service request templates
    The error appears when I try to add the logical link id,
    Because of the above error I am not able to create service request template in sap crm, please advice which logical link ID, I need to use so that the service request template can be created in the system.
    Kind Regards
    Atul

    Hi Atul,
    1. Screen shot 1 is correct
    2. Screen shot 2 - You are at end of all work centers in your custom role which you might have copied from standard or Z role. If you look in standard role SERVICEPRO, navigation bar profile SRV-PRO, work center - SRV-ORD, you will find service request template
    In Cases work Center in standard SERVICEPRO role you can create service request template.
    Try copying this to your custom role in your required work center. It should work.
    Regards,
    Niraj

  • Error when creating a transport via a correction in charm

    Hi Folks..
    I am getting an error when I attempt to create a transport using a correction from a change document which is created from a service desk message.  I am able to go through the entire process upto creating the transport in the satellite system.  When I try I get the following error:
    Action Create Transport Request in system DBW 111 of type Source Systems has been cancelled
    There is nothing in the action log or either system log.  Has anyone seen this before?  I can't find anything in Notes, google or here in SDN.
    Thanks for your help!
    Best Regards,
    Bill

    Hi
    check log of this action in the task list (goto task list -> search error in calendar -> double klick for details)
    Maybe:
    -You don't have a user in the development system
    -You have created a task for a non existing user
    -RFC user of TMW RFC has not enough authorization in the dev system to create transports (trace authorizations while creating transport)
    best regards
    Andy

  • Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

    in OIM 11g R2
    Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

  • Procurement Coordinator received Authorization Error when creating Bid Inv

    Hi All,
            In SRM I have an issue Please help me in solving this. Please see below
                  Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit.  Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators.  This problem does not happen for Commodity Managers

    Hi
    Please do the following steps.
    When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
    ALso pls check the foll:
    -->activate the services through SICF tcode.
    > Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
    >Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
    Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
    Could you please review again the following steps ?
    Did you check that ICM was working correctly (TA SMICM) ?
    1-Activate the necessary ICF services
    With transaction SICF and locate the
    services by path
    /sap/public/bc/its/mimes
    /sap/bc/gui/sap/its/webgui
    2- Publish the IAC Services
    With Transaction SE80 locate from
    the menu Utilities -> Settings ->
    Internet Transaction Server (Tab) ->
    Publish (Tab) and set “On Selected
    Site” = INTERNAL.
    3- Locate the Internet Services SYSTEM and WEBGUI.
    Publish these services with the Context
    Menu -> Publish -> Complete Service
    4- Browse to http://<server>:<icmport>/sap/bc/gui/
    sap/its/webgui/! and login to the
    webgui.
    Hope this will help.
    Please reward suitable points.
    Regards
    - Atul

  • Publish to portal error when creating a iview

    hi gurus,
    I have done complete BI-EP integration. SSO is also working fine. But when i publish a query from query designer to portal, i am geting a error when creating a iview for the query as show below.
    Error:
    Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId EPD_PORTAL_B07 on host epdev with SSO not authorized: Authentication failed.
    when i manually create a BI Query iview,its working fine but to create a iview from publish to portal in query designer it is througing me error.
    Regards

    yes i have used that tool,,,i am getting below error.
      RED
    Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
      RED
    Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
      RED
    Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
      RED
    Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
      RED
    Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
      RED
    Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
      RED
    Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore Import the certificate to establish a trust relationship -
      RED
    The issuer DN of the imported ticket 'EPD_certificate' is the same as the issuer DN of SAPLogonTicketKeypair-cert Most likely, you are running an Add-In Installation. See note 917950, section 'Add-In Installation and importing Certificates with identical system ID (SID)' for details Display note 917950
    I have checked everything,,but still geting red lights
    Regards

  • ERROR When Create Project

    Hello,
    I receive this below error when create project 
    GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='c27f372b-2a35-e311-9420-00155d000806' JobUID='05a50b2a-2a35-e311-9420-00155d000806' ComputerName='cb123222-a0b2-4ad1-bd20-3e4809df7a4a'
    GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='58b84c9c-8266-f0a7-f7a4-a41dcfc7411f'. For more details, check the ULS logs on machine
    cb123222-a0b2-4ad1-bd20-3e4809df7a4a for entries with JobUID
    05a50b2a-2a35-e311-9420-00155d000806

    Hi Khaleel,
    Do you see only this message or do you also see something like below:
    CreateWssSiteContent: Creating project site failed! Project Uid=8e180c10-5433-4424-a236-54ea989872fa, site URL=http://PROJECT.test.com/PWA/AAAtest1000, site name=AAAtest1000. Microsoft.SharePoint.SPException: The site template requires that the Feature {e8389ec7-70fd-4179-a1c4-6fcb4342d7a0}
    be installed in the farm or site collection. at Microsoft.SharePoint.Utilities.SPUtility.ThrowSPExceptionWithTraceTag(UInt32 tagId, ULSCat traceCategory, String ......
    So, if you see the above message, its a feature that is missing. How many servers do you have in the farm? Do you have a separate project application service server?
    In that case you will have to copy the feature under "14\TEMPLATE\FEATURES" features folder from WFE to application server also. This is because when creating a project workspace, PSI will refer to this feature on application
    server and since it is not present in application server, it fails creating the site.
    Happy troubleshooting.....
    Vikram Daruru - MSFT

  • ESS Payslip : Error when creating a form

    Hi Experts,
    Please help me on this issue.
    The payslip is not getting generated in QA portal. I have checked everything, feature, report variant. The payslip is getting generated from the back end.
    But I have not checked from PZ11_PDF, becz of authorisation issue.
    Can anyone guess what could be the problem?
    thanks
    Jay

    Here is the error
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Error when creating the form   
      Error when creating the form:com.sap.pcuigp.xssfpm.java.FPMRuntimeException: Error when creating the form
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:112)
         at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:122)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.reportBapiRet2Error(FcRepFramework.java:525)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcGetForm(FcRepFramework.java:394)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.processFollowingActions(FcRepFramework.java:484)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.callRfcExecAction(FcRepFramework.java:378)
         at com.sap.xss.hr.rep.fcrfw.FcRepFramework.initModel(FcRepFramework.java:292)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFramework.initModel(InternalFcRepFramework.java:256)
         at com.sap.xss.hr.rep.fcrfw.FcRepFrameworkInterface.initModel(FcRepFrameworkInterface.java:136)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface.initModel(InternalFcRepFrameworkInterface.java:198)
         at com.sap.xss.hr.rep.fcrfw.wdp.InternalFcRepFrameworkInterface$External.initModel(InternalFcRepFrameworkInterface.java:258)
         at com.sap.xss.hr.rem2.selection.VcRem2Selection.onInit(VcRem2Selection.java:245)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2Selection.onInit(InternalVcRem2Selection.java:249)
         at com.sap.xss.hr.rem2.selection.VcRem2SelectionInterface.onInit(VcRem2SelectionInterface.java:161)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface.onInit(InternalVcRem2SelectionInterface.java:144)
         at com.sap.xss.hr.rem2.selection.wdp.InternalVcRem2SelectionInterface$External.onInit(InternalVcRem2SelectionInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Maybe you are looking for

  • Memory Upgrade for T61

    Hi friends, I have a T61 7663-xxx system, with 1 GB PC2-5300 667 MHz RAM. My Front Side Bus is 800 MHz ( I think so!), Everest software reports my memory controller is dual channel capable, and ~ 85% physical utilization of RAM. I have a nVidia Quadr

  • Mini DVI to VGA adaptor

    Hi - having a frustrating time trying to buy a mini DVI to VGA adaptor for a macbook with a core 2 duo - none on the apple shop, only ones for intel core duo which does not fit (says review)  I need to to connect a monitor to the MacBook.  Help

  • Posting date is wrong in the reversal document in FI document

    Hi All, We have one issue related to Posting date. We need your valuable feedback on the same: Issue: There are some documents which reversed in the month of Mayu20192010 but the posting date is coming as Marchu20192010 which is very strange.  The Or

  • Itunes (Mac) won't recognize ipod touch - please help!!

    Hi. I have a brand new 4th-gen ipod Touch. I'm running Snow Leopard and iTunes 10.4.1 on a Macbook. I have three other ipods (classic, shuffle x 2) and they all work fine. THe USB cable and port work fine with other ipods (and with this one on the ra

  • Correcting 'Read only' file problem ...

    I while ago I had an HD problem. I installed a new HD, upgraded to Leopard and then brought all my old files in from an external backup. My problem is that they're all now 'Read only'. Is there a way I can solve this problem at a stroke, without havi