Error when creating transport request for transfer rules
Hi
When we are creating the transport request it is giving the Warning 1."source system are not transported.
Error 2." you can't use request BQAK900164
Error 3."object ISTS Zevkkn_bb could not be saved
to order BQAK900164.
This is very urgent.
Please reply soon.
Thanks in Advance,
Regards
Pankaj Angra
Hi,
Did you replicate the data source?. That could be the problem or there might be problem you have set up the source system on your BW system
make sure that the source system names are mapped from your R/3 dev to your R/3 QA. This is done on the BW QA (target system) RSA1 => Tools => mapping of source system names. make sure your entries are there for the logical system names of your dev to qa.
Then in the BW dev, when selecting the trasnfer rule make sure to select the appropriate source system. (souce system icon in tool bar)
Do u hav 2 Source sys ?
-Shreya
Similar Messages
-
Error when creating transport request in Charm for Portal
Hello Guru's,
I'm configuring ChaRM for our Portal environment using CTS+
When I create a transport request I get the following error message:
Parameter EPD not in version of tp configuration.
Any thoughts????
Regards,
DavidHello David,
Please review the following SAP Notes to see if they will assist you on resolving the issue that you are having:
1107361 - Migration BAdI-Implementation Error Message XT 465
45548 - Transporting language-dependent objects
Hope this helps you out!
Thanks,
Mark -
Error in creating Transport Request for a view table
Hello all,
I have an ECC IDES 6.0 system named EC1 and another one which is ECC EhP4 IDES named EA1 which I have just installed.
One of my requesters has a view table named ZVAITM_TBLE in EC1 and she wants it to be transported to EA1.
So I created a workbench transport in SE10 and included the following:
PgmID = R3TR
Obj = VDAT
Object name = ZVAITM_TBLE
But when I press enter, I encountered the following error:
No object definition exists for Customizing object ZVAITM_TBLE
Message no. TK427
Diagnosis
The Customizing object R3TR VDAT ZVAITM_TBLE is not defined in the tables of the Change and Transport System.
This means that you cannot use the Transport Organizer to edit it.
System Response
The function terminates.
Procedure
First check whether the name of the object is correct. Then you (or the system administrator) should check the object definition, to ensure that the object was created correctly (transaction SOBJ).
If the object does not exist, then create it or delete it from the request/task.
I am new to transports so I have no idea how to proceed.
Please advise.
Thanks a lot!
Cha ChaHello Cha,
Kindly open this custom table using SM30 and try creating a transport request from there.
Regards
Vivek -
Error when creating transport request in 000 clinet
Hi All,
I am getting the below message when creating a transport request manually in 000 client
Requests can only be created from ChaRM!
Message no. 38001
How can I deactivate charm for short time and then activate it again?
Please let me know your suggestion.
Thanks
AmairHi Sanjai,
Thanks for the quick response.
But I think it will disable charm process for the entire landscape. What we need to do if we want to disablke for particular system like one development system?
Thanks again
Amair -
Vehicle Scheduling Error:Error when creating transport structures in live C
HI Gurus,
We have one background job defined for Vehicle scheduling, which shows completed successfully but in log it says that :
: Error when creating transport structures in liveCache and Not possible to schedule shipment in the planning horizon.
My planning horizon is for 90 days from current date and demand horizon is for 30 days.
I have checked the VS profile and i dont find any problem with profile.
Can you please help me in finding what exaclty went wrong
Thanks,
AMolTry This..
1. Open the crystal client on your local machine and import that particular report.
2. Do Database -> Verify Database. Then refresh the report on your PC and make sure that it returns data as expected.
3. Export it back to repository and try scheduling it again. You can verify through CMC for Crystal Reports under " Database Configuration" property to make sure it points to the right ODBC.
Let us know. -
How to create transport request for standard web template
hi all
can any one tell me the step by step procedure to create transport request for standard template?
thanks
shaliniBusiness Content --> Choose & Install the standard web template & then collect the object for transport...Assign a Package & when prompted for Transport Request --> Opt for a new transport request.
Message was edited by:
Jerome -
How to create transport request for standard text created using SO10.
Hi,
How to create transport request for standard text created using SO10?
Regards
Ramakrishna LHi,
For the Standard text created in SO10,
please go to transaction SE78 -> FORM GRAPHICS->STORED AS TEXT->STANDARD TEXTS->
Double click on ADRS or ST or what ever your type of text->
Enter your standard text name
Click on transport button->SHIFT+f6-> It will ask you for a transport request.
Best regards,
Siva -
Creating transport request for SQVI
Hi ABAP Guru's,
I have created a query using SQVI. How can I create transport request for it because I want to transport that to QA.
Thanks.
Regards,
Tushar.Hi Tushar,
You cannot transport The query made via SQVI is only intended for individual use/reporting purpose.
To transport the query by converting it to SAP Query source of data tobe converted to an Infoset.
SQVI-> SAP QUERY
QUERY(MENU) -> CONVERT QUICKVIEWS
Assign Infoset and Area to the Query and then you can transport.
Hope this may help you.
Regards,
Lanka -
Error when creating document flow for delivery
Hi,
I would like to post the GR for Inbound delivery. I receive an error the TO is not confirmed. I have tried to confirm the tranfer order and I receive the "error when creating document flow for delivery . In order to avoid inconsistencies the goods movement posting was cancelled." It seems like the document already exist.
How can I do to confirm the TO and post the GR.
Thanks
DedeIn Inbound delivery after GR only a TO is created and confirmed.
So please check the PO history and see a GR is there or not .
Once a GR is found create a TO and do the confirmation -
"update rules inactive " error when importing transport request
Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc. -
can anyone help me?
Hi Anand,
There are 2 ways for transporting LSMW data from a system to another.
1) Export/import this method gives you the opportunity to select the subprojects or objects you want to transfer. Hence you don't transfer the object a colleague might have created and that should stay in development system. LSMW -> Extras -> Export project
2)Transport request with this method, you can transport a LSMW project in full (you cannot select the objects you want). With this method, the project will be transported as any other SAP object in a transport order.
LSMW -> Extras -> Create change request
For more information, refer below link Steps to copy LSMW from one client to another
Thanks
KH -
How to Create Transport Request For custom table
Hello All,
I have and requirement to create transport request automatically when and record inserted in to the custom table.
Actually FI whe people create or delete some bank account from DEV client the transport request creates automatically and they transport that request to Quality and Production system to delete or create that account from all the systems. but when they delete the account all the informations related to that bank accounts get deleted from all the standered customize tables . to keep the track of that deleted account I have created one z table which is of type customize table. this table is filled automatically when any account get deleted from DEV system. now I want to pass that record to Quality and Production systems using transport request.
how can i create transport request when record get inserted into my ztable automatically.
Thanks in advance.
VinodHello All,
This is a FAQ and has been answered many times before in the forum.
1. Maintain delivery class 'C' it will start asking for a TR: False. Delivery class has got nothing to do with the TR prompt. It determines how the data is to be transported. A delivery class 'C' will prompt for a customizing request, whereas a delivery 'A' will prompt for a workbench request.
2. For the system to automatically prompt for a TR you have to select the "Standard Recording Routine" in the table maintenance generator. This will prompt you for a TR every time you try to create / modify a record & save it to the DB.
Hope i am clear in my explanation.
If your table is filled automatically through some coding you have to add the entry to the TR programmatically. Check this link for details: [http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically|http://wiki.sdn.sap.com/wiki/display/ABAP/TransportingTableEntriesinABAPprogrammatically]
BR,
Suhas
Edited by: Suhas Saha on Mar 31, 2010 11:22 AM -
How to create Transport request for OKC9
Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
VijayCheck whether t he Request is being generated or not
if yes
go to SE10
display the tranport request
Release the Cusotmising Task first
later relase the Request
and later Check whetehr the Request is passed in Qiality form Development thru t code STMS
Check with ur basis consultant once -
How to create Transport request for OKC9 changes
Hi Experts,
I changed the Prerequisite for one of the substitution in Development client.
No I need to move the same to Production client, but after make changes in prerequisite am not generating the Transport request. Please help me out how to create the Transport Request for the same.
Regards
VijayHI,
In the same screen, go to Menu bar>Table view. Transport.
This will help you to create Transport request and u can move the same to Production.
Vijay -
Error when creating Travel request
Hi all,
I am encountering error "Percentage is too high" when creating a travel request. When i tried to change the cost centre to split into different entries.
Ex: 1) 10 % cost centre1
2) 40% cost centre2
3) 50% cost centre2
when i try to save the request i encountered error with "Percentage 90% is too high" as the first entry is reverting back to the initial entry before modification(initial entry is 100% with cost centre1) it is reverting back the first entry as 1) 100 % cost centre1 that means now the entries are becoming
Ex: 1) 100 % cost centre1
2) 40% cost centre2
3) 50% cost centre2
altogether 190% so throwing an error with "Percentage 90% is too high" as the total percentage is more than 100%.
Can you please help in resolving this issue.hi,
see this link
Percentage Overhead Rates are not capture with Transport request
refer this link to know how to create travel reaquest
http://help.sap.com/erp2005_ehp_03/helpdata/EN/46/51f0e994b85e40e10000000a11466f/content.htm
http://help.sap.com/saphelp_45b/helpdata/en/b6/cdaab649e911d189060000e8322f96/frameset.htm
thanks
Maybe you are looking for
-
How to add a new field in migo transaction (header level)
hi guru's can you please tell me how to add a field in migo transaction? i want to add a field in header data and that too under "general" tab. i dont have data regarding that field. and when we enter a value for that field in migo, it has to take .
-
Set default frame size to "large" instead of "tiny"
Hello, The title says it all, really. As I do more scripting than animation, I'd like to have large frames by default. This setting is not even saved with the file. Is there any way ? Thanks. PJ
-
Entering symbols in GTK programs
I use the spanish ISO keyboard layout, and I've noticed I cannot enter symbols that require the option key (such as \|@#¢∞{}[]€£) into GTK programs. If I set the swapAltMeta preference to true, I can get them with the command key, while the option ke
-
Hi I have an object in universe like "Fiscal Quarter". The values of this object are like Q1 FY08,Q2 FY08,Q3 FY08.....I want to create prompt on this object in webi like "Fiscal Quarter between.....and......". As this is character data how will the B
-
Gathering schema Statistics and Index rebuilding
I want to know after how much time we must gather the schema Statistics and Index rebuilding. In our system approximately 7 logfile generates in one day Please suggest me