Error when creating warranty claim from service notification.
Experts,
I am trying to create a warranty claim from a service request and system is going into abap runtime error.
When I checked the function module WTYSC02_CLM_FRM_NOTIFICATION it is giving a syntax error in the source code LWTYSC02U08
The data object "LS_ORDER_HEADER" does not have a component called "UPDATE_NEEDED".
Thanks in adavance for your reply.
I dump analysis it is giving the following error,
The following syntax error occurred in program "SAPLWTYSC02 " in include
"LWTYSC02U08 " in line 147:
"The data object "LS_ORDER_HEADER" does not have a component called "UP"
"DATE_NEEDED"."
Think the problem is in the source code.Is there any note to correct this.
Thanks,
ashraf
Similar Messages
-
Error When Create Shopping Cart from catalog SRM
Hi all,
Currently, I have problem need your help.
I tried to create an shopping cart from catalog. But I don't know how the G_L_ACCT was lost.
The information about account like this:
Now, I want to know where this data is selected. Would you please help me for this issue.
Extra Information: Acc_cat = 'A'.Dear Melynessa: normally you should not get this error message when flagging "Order as Direct Material" in SRM 7.0.
Please, check in your backend ECC6 if "Value updating" flag has been selected or not for the material type of your SC material ID under the IMG path "Logistic - General --> Material Master --> Basic Settings --> Materual Types --> Define Attributes of Material Types"
If field "Value updating" for material type is not flagged then, when creating a PReq or PO in SAP ECC6, you will get always an error message asking you for an account assignment.
Due to the circumstance above, in SRM, materials ID belonging to non-valuated material types should not be ordered as direct (flag order as direct is available always when you enter a material ID, even when it is non-valuated). If you flag the field "Order as Direct" for a non-valuated material, standard SRM system doesn't issue any error message. So, maybe, there is BAdi in your SRM system checking the "Value updating" for material type and avoiding "Order as Direct Material" flag being selected when it is a non-valuated material
Hope it helps.
regards
Valentí -
Error when Creating a PO from an Awarded RFP
Hello ESO Experts.
I have a Question of integration topic.
I was trying to create a PO from RFP that was alredy awarded. When i went to the tab Awards , selected Scripts -> Publish to ERP i got the next error
ID: Content is not allowed in prolog.
What do i have to do in order to create succesfully the PO?
Thanks...
Edited by: sebastian.montero on Aug 25, 2011 12:04 AMHi
We can not create a PO from and info record, we can only refer the info recodrd for the price and conditions during PO creation for the vendor/material/pur orgn. concerned . A PO can be created by referring a PR / RFQ / Contract only.
Regards
Edited by: samuel mendis on Jan 25, 2010 11:58 AM -
Getting the Error when creating the WSD(Web Service Defination)
Hello,
When I tried to create the WSD(Web Service Defination) through the Wizard or function module I am getting the error "Error during activation" and again it is giving the error "internal error ACTIVATE in WEBSERVICE Wizard;".
What will be the probable cause of this error.
Is I have to change some configuration
Please Suggest.
Thanks
VineetI have the same problem - error returned is
Error during activation
Message no. WS_TOOL085
but no further information is provided
But the Virtual Interface in the package does activate with no problem - so this is WSD specific!
Some help would be appreciated... -
Warranty claim from service order
Hi
i've configured the integeration of service order to warranty claim, and maintained my DIP profile ... now when i excute my service order my claim is getting gernerated by not gettting read at WTY transcation .......andalso my compoent level material is not gettting picked up at my Warranty claim
ThanksAlso [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=347230]
PeteA -
SP 2010 - Error when creating a new Search Service Instance
Hi experts,
I'm getting the below error logged in my SharePoint 2010 SP2 Server. Any ideas to resolve it please? Thanks in advance.
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (9b011033-0dc6-4d77-8f22-c16aa010532f). Reason: Exception from HRESULT: 0x80040D23
Technical Support Details: System.Runtime.InteropServices.COMException (0x80040D23): Exception from HRESULT: 0x80040D23
at Microsoft.Office.Server.Search.Administration.MSSITLB.IGatherManagerAdmin3.get_ConfigurationVersion()
at Microsoft.Office.Server.Search.Administration.Gatherer.ProvisionGlobalProperties()
at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
Hamza Grandidid you see any error in Event/application logs? could you please tell us at what point you getting the error?
mostly this is happen when An index corrupted, may need to rebuild / reset the index.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
BI Publisher throwing error when creating data model from Oracle BI Answers
I'm having issues creating BI Publisher Datamodel using BI EE as a source. When i select the answer and put the inforamtion needed and hit OK ....it's start doing soehting and then it get there ....
In the logs:
It is weird that the Logs is having a message saying that path was not found "/users/mpoler/Data Model without Title.xmd"/_datamodel.xmd
Any clue on what is going on?
Thanks!
MatiasCan you try using a different account to run this report, if possible use someone from a different Application role.
The last Time I saw something similar was when the integration between BIP and Analysis was done incorrectly and a few roles were missed.
Letus know what you find out.. -
Occurs error when create purchase req. from product order with 'PP02'
hi,friends.
when i add a route with 'co02', and select control key 'pp02',
then it leave to the view of 'Ext. Processing',
i input the values of 'Cost Element' 、'Purchasing Group' 、'Material Group'....
and the value of 'Res./Purc. req.' is '3',
but when i return,it shows the error:
Error occurred during creation of purchase requisition for operation 0050
Message no. C2325
Diagnosis
During automatic creation of the purchase requisition to operation 0050, an error (ME 673) occurred.
System Response
The system cannot create the corresponding purchase requisition.
Procedure
For further proceedings, read the long text of error message (ME 673) in transaction SE91. Check the operation affected and change or complete any missing data that led to the error message.
double click the route,goto the view of 'Ext. Processing',
and the value of 'Res./Purc. req.' changed to '2',
why?
and the purchase request isn't be created.thanks for K.Madhu Kumar
the value of Res./Purc. req. be changed to '2'
so the purchase requisition con't be created.
if i Release the production order,it will be created,
and the item cat. is null, the acct assgt cat. is 'F'
Edited by: tizo lee on Jul 20, 2010 5:11 AM -
Procurement Coordinator received Authorization Error when creating Bid Inv
Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity ManagersHi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul -
Customizations about sales order from service notification
We can create sales order from service notification. I have 2 questions about this subject:
1. How can I choose the type of the sales order? Where is its customizing?
2. How can I hide or make visible the button of "Sales ord." ?
Thanks in advance for the answers....Hi,
Check the setting in the ODP1 transaction for the sales order assigment with service notification.
Regards,
Raj -
Hi,
I have created a web service in SAP ECC from a RFC.
While configuring the web service in SOA management to publish it, getting error SRT Framework exception: ICF: Error when creating service node. [rc:wrong_icf_name] No special characters allowed in name
How to resolve the same.
Thanks
TanmayHello Tanmay,
Are you including quotes (') in the name, I assume not?
Regards,
Siddhesh -
Helpme I have error when I try connect from struts to web service
helpme I have error when I try connect from struts to web service using basic authentication . the error message is
[SOAP Exception: fault code= SOAP-ENV Protocol; msg=Unsupported response content type "text/html" must be "text/xml"; ] Response was <html><body> 401 Unauthorized </body></html>
I'm not using ldap for authentication only xml (jazx-data.xml) ... I already create user with jazn.jar for that user , and I dont know why it still error like that ..
Please helpme I don't have anytime more to find the mistake , ??
I'm using Jdeveloper 9i , and oc4j 9.0.4 Server (Not embedded with Jdev)
But when I use with sample java client it success .....
then I try with Struts the response is unsupported response content type text/html must be text/xml response was 401 Unauthorized1.The reason why this error occurs is, we are getting non SOAP response when the program is expecting a SOAP response. Did you set the proxy server correctly? Try to handle the exception and see the content type of the response in your program.
2. While creating the client stub u must check an option for authentication for webservice .should solve ur problem.
thanks
sirisha -
Error when creating link to documents from material
Hi all,
while creating the purchase order the error message "Error when creating link to documents from material 61260224060" is displayed.
why this error message is displayed.?
Regards,
GaneshRajaHello Ganesh
Please check material master - view 'Bases data 2'.
There is checkbox 'No link'. You can activate this checkbox if you are not storing any drawing/designe docuemnt for this material.
Try to do this and check out again.....
If this helps you in resolving your issue, i would appreciate if you reward the answer with suitable points.
Best Regards
Avinash -
Error when creating service node. [rc:special_service_error]
Hi,
I have updated or created Inbound Service Interface in PI ISR, but when i acitivate the SI in SPROXY, the following message raised:""Error when creating service node. [rc:special_service_error] Method: ServiceCreate; return code: 3 Exception of class CX_SRT_WSP_ICF",
anyone can solve this issue,thanks?
GongtaoPlease check with your SAP Security Team if you have complete authorization/roles to generate proxies.
See related issue on this link: Inbound Proxy Error - JDBC to PROXY Scenario
Regards,
Jenny -
Userexit or BADI to change service price when create PO reference from PR
Hi,
I need userexit or Badi to change the gross price ( ESLL-TBTWR ) when create PO reference from PR. Currently , when I do this it will recalculate the gross price based on the service master and ignoring whatever the price put in PR. Could anyone tell me userexit or Badi that would allow me to change the price when i create PO from PR via ME21N.
Thanks,
GilbertHi Gilbert,
You can try using Function Exit EXIT_SAPLMLSP_030 of Enhancment SRVESLL.
This Function Exit has ESLL data as changing parameter.
But this Function Exit is called from a number of transaction. So do put in correct checks (like sy-tcode or sy-ucomm) before substituting any values. If proper checks are not put in then values may be substituted when this function exit is called from other transactions (like tcode "ML81N").
Hope this will help.
Regards,
Abhisek.
Maybe you are looking for
-
Very angry when I check in my iMacG5 to the service...
I've got my imac isight for about 2 weeks and it started having buzzing noise so I decided to check it in to the service department in a mac store near me. The woman who was checking out my iMac was so rude!!! She hold the machine's "foot" with one h
-
If I update my itunes software will i loose my downloaded ios for ipod ipad and iphone?
If I update my itunes software will I loose my downloaded ios software for iPod iPad and iPhone?
-
Where to download Oracle client installation .exe file
Hi, I need to install an Oracle client on a Windows Server 2008 (32-bit), how do I do that? I want to install Oracle client version 10.2.0.4 (Instant Client Package - Basic: All files required to run OCI, OCCI, and JDBC-OCI applications). I can't fin
-
Will installing 10.5 erase everything on my computer ?
Hello, this question may sound a bit ignorant but here goes...I have a Power Mac G5 running OS X 10.3.9, I came across a 10.5 install disc...I am concerned that if I install the new OS that I will lose all of my files...Such as Pro Tools, my Itunes m
-
Installing arch on old laptop without internet
i've been playing around with linux for the past month, mostly using mandriva and for a very short time slack and ubuntu. mandriva works well and was definitely a smooth change for a long time windows user. due to a dying harddisk i even learend some