Error when deploying BPM application: The specified process was not found
Hi,
I was trying to deploy a simple BPM application to a SOA Server, when I got the following error:
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
[04:55:19 PM] HTTP error code returned [500]
[04:55:19 PM] Error message from server:
There was an error deploying the composite on WLS_SOA2: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=myadress:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details.
[04:55:19 PM] Check server log for more details.
[04:55:19 PM] Error deploying archive sca_PRUEBABPM_rev1.0.jar to partition "default" on server WLS_SOA2 [http://myserver:8001]
The log file in the server console shows this:
Error during deployment oracle.fabric.common.FabricException: Operation failed - Member(Id=1, Timestamp=2013-07-15 19:30:56.492, Address=192.168.168.231:8088, MachineId=15229, Location=site:,machine:soadev1vhn1,process:29545, Role=WeblogicServer):Error occurred during deployment of component: PruebaManual to service engine: implementation.bpmn, for composite: PRUEBABPM: java.lang.RuntimeException: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct: oracle.bpm.metadata.exception.MetadataException: BPM-70812: Process 'PruebaManual' not found. Cause: The specified process was not found. Action: Check that the name of the process is correct; . Please see the server diagnostic logs on WLS_SOA2 for details at oracle.integration.platform.blocks.deploy.CompositeDeploymentCoordinatorMessages.throwOperationFailedOnNode(CompositeDeploymentCoordinatorMessages.java:132) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.submitRequestAndWaitForCompletion(CoherenceCompositeDeploymentCoordinatorImpl.java:351) at oracle.integration.platform.blocks.deploy.CoherenceCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(CoherenceCompositeDeploymentCoordinatorImpl.java:214) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:467) at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:268) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:203) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:147) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:134) at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:100) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:221) at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130) at javax.servlet.http.HttpServlet.service(HttpServlet.java:727) at javax.servlet.http.HttpServlet.service(HttpServlet.java:820) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119) at java.security.AccessController.doPrivileged(Native Method) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:324) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:460) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:163) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:252) at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Restart the server as I found in some pages and even a thread here (https://forums.oracle.com/thread/1557156) is not the better solution, the real issue still unknown. I need to find a solution without restarting the server machine.
Thanks,
AAPDL
That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen
Similar Messages
-
Hi all,
I need to create service to access all unread mails of other mailbox's every time in Exchange server 2013, for that i trying to use Delegate access.
but i am not succeed. I am getting Error Every time : [The specified object was not found in the store]
error shows in FolderId in
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
List<DelegateUser> newDelegates = new List<DelegateUser>();
DelegateUser emailDelegate = new DelegateUser("[email protected]");
emailDelegate.Permissions.InboxFolderPermissionLevel = DelegateFolderPermissionLevel.Editor;
newDelegates.Add(emailDelegate);
Mailbox mailbox = new Mailbox("[email protected]");
Collection<DelegateUserResponse> response = service.AddDelegates(mailbox, MeetingRequestsDeliveryScope.DelegatesAndSendInformationToMe, newDelegates); var userMailbox = new Mailbox(useremail);
var folderId = new FolderId(WellKnownFolderName.Inbox, userMailbox);
var itemView = new ItemView(20);
var userItems = service.FindItems(folderId, itemView);
i changed my code in many ways by adding new Delegate User with different folder permissions.
but i am getting same Error, Please help me.That error means you don't have rights to the Mailbox your trying to access. In Exchange by default the only user that has access to mailbox is the owner of the Mailbox, Exchange Administration rights does not grant you access to another users mailbox. You
need to either specifically grant rights to each mailbox using Add-MailboxPermissions or use EWS impersonation where you can impersonate the owner of the Mailbox see
http://msdn.microsoft.com/en-us/library/bb204095(EXCHG.140).aspx and
http://msdn.microsoft.com/en-us/library/office/dd633680(v=exchg.80).aspx
Cheers
Glen -
When I open up a PDF Document all i get is an error message saying: "There was an error opening this document. The network path was not found" I dont know how to fix this, so looking for some advice please, as I really need o open up my documents.
Thank for any help.The documents I’m trying to read are already saved on my computer, under various different headings, I know that we have a server, so I only assume these documents are saved on here, as I said before I’m not good with all this techno stuff. I do my work each week ( on a payroll system) and save the documents for each company, they automatically go to the correct place. I never request for them to be saved in a certain place ( well not that I’m aware of) . I then on occasions need to open up this information, it is then that I can’t read or open the documents. We do have a tech help, but they are off sick until the 5th Jan, hence me trying to work out if I can fix this problem through this help site. Its ADOBE Reader that I’m trying to use.
-
While trying to access my library in iTunes, I receive an error message; The requested URL was not found on this server. This only happens with my older songs, but not with the ones I have most recently added? Any thoughts?
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
-
SCCM 2012 Setup error when setting SQL connection info "Network Path Was Not Found"
Hello.
I'm facing an issue during CCM 2012 SP1 Beta Setup on step "DB INFORMATION"
My lab is set like that:
1x Front-end WS 2012 rtm "CCM Install on it" (Fresh install = no features installed)
1x Back-end WS 2012 rtm SQL Server 2012 SP1 (I don't know if this is supported).
On the sql Side there is already a first instance with SCVMM 2012 SP1(beta) environment that work well.
A second dedicated instance is ready for CCM install.
Named Pipes enabled , TCP/IP Enabled
Firewall rules for 1433 and 4022 are enabled on the Domain profile ,other profiles are disabled.
Instance Service is running with a domain account
Everything is published in AD (delegations for computer account), Schema Prep already done manually.
I'm Able to resolve dns name of the SQL server on the CCM VM and telnet 4022 + 1433 ports.
For the finish here is the end of Setup Wizard logs:
Exception rethrown at [0]:
à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.Controls.Button.OnClick()
à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
à System.Windows.Input.InputManager.ProcessStagingArea()
à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
14/12/2012 08:21:06: ConfigMgrSetupWizard Information: 1 : Creating SQL connection to database SCCM\master on server SQL001.IT-DEPLOYMENT.LAB.
14/12/2012 08:21:53: ConfigMgrSetupWizard Error: 1 : Exception message: [Le chemin réseau n’a pas été trouvé.
], Exception details: [System.IO.IOException: Le chemin réseau n’a pas été trouvé.
Server stack trace:
à Microsoft.Win32.RegistryKey.Win32ErrorStatic(Int32 errorCode, String str)
à Microsoft.Win32.RegistryKey.OpenRemoteBaseKey(RegistryHive hKey, String machineName)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.GetSqlConnection(String databaseName, String serverName, Boolean encrypt)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabaseUtility.CheckSqlConnection(String serverName, String instanceName)
à System.Runtime.Remoting.Messaging.StackBuilderSink._PrivateProcessMessage(IntPtr md, Object[] args, Object server, Int32 methodPtr, Boolean fExecuteInContext, Object[]& outArgs)
à System.Runtime.Remoting.Messaging.StackBuilderSink.AsyncProcessMessage(IMessage msg, IMessageSink replySink)
Exception rethrown at [0]:
à System.Runtime.Remoting.Proxies.RealProxy.EndInvokeHelper(Message reqMsg, Boolean bProxyCase)
à System.Runtime.Remoting.Proxies.RemotingProxy.Invoke(Object NotUsed, MessageData& msgData)
à Microsoft.SystemCenter.ConfigMgr.Setup.CheckSqlAsync.EndInvoke(IAsyncResult result)
à Microsoft.SystemCenter.ConfigMgr.Setup.DatabasePage.ValidatePage()
à Microsoft.SystemCenter.ConfigMgr.SetupFramework.WizardForm.ActivatePage(String pageId, Boolean goingNext)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.Controls.Button.OnClick()
à System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp(MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.ReRaiseEventAs(DependencyObject sender, RoutedEventArgs args, RoutedEvent newEvent)
à System.Windows.UIElement.OnMouseUpThunk(Object sender, MouseButtonEventArgs e)
à System.Windows.RoutedEventArgs.InvokeHandler(Delegate handler, Object target)
à System.Windows.EventRoute.InvokeHandlersImpl(Object source, RoutedEventArgs args, Boolean reRaised)
à System.Windows.UIElement.RaiseEventImpl(DependencyObject sender, RoutedEventArgs args)
à System.Windows.UIElement.RaiseEvent(RoutedEventArgs args, Boolean trusted)
à System.Windows.Input.InputManager.ProcessStagingArea()
à System.Windows.Input.InputManager.ProcessInput(InputEventArgs input)
à System.Windows.Input.InputProviderSite.ReportInput(InputReport inputReport)
à System.Windows.Interop.HwndMouseInputProvider.ReportInput(IntPtr hwnd, InputMode mode, Int32 timestamp, RawMouseActions actions, Int32 x, Int32 y, Int32 wheel)
à System.Windows.Interop.HwndMouseInputProvider.FilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à System.Windows.Interop.HwndSource.InputFilterMessage(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
à MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
à System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
à System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)].
Please help me; I'm driving crazy.
Kévin KISOKA - MCTS Exchange Configuring, MCTS Hyper-V Server Virtualization3 Steps are neccessary:
1. Make sure the Windows Firewall Service on the SQL Server is running and set to automatic
2. Add the SQL EXE as a Program Exception to the Firewall on the SQL Server:
To add a program exception to the firewall using the Windows Firewall item in Control Panel.
- On the Exceptions tab of the Windows Firewall item in Control Panel, click
Add a program.
- Browse to the location of the instance of SQL Server that you want to allow through the firewall, for example
C:\Program Files\Microsoft SQL Server\MSSQL11.<instance_name>\MSSQL\Binn, select
sqlservr.exe, and then click Open
- Click OK.
From http://technet.microsoft.com/en-us/library/cc646023.aspx
3. The last step neccessary, on the SQL Server, is to set File and Printer Sharing "on". When this is off, the following error occurs: "Network Path was not found" -
Discussion Forum: Unable to perform the operation: Row was not found using
Hi all,
I deployed the Discussion Forum and it shows the Portlet with "Creating a product ..". Very fine.
I can create a Product. Fine also.
I can fill in a new Thread, but then, when I try to submit it, I get the error:
Unable to perform the operation: Row was not found using request parameter: 000100000004313437380000012A000000F8FE832E94.
When I click Cancel. I see the Overview of the Products. I drill down to the Threads for my Product and the new thread appears on the list. As soon as I click on the Thread in order to read it the following error appears:
Unable to perform the operation: Row was not found using request parameter: 0001000000043134373800000134000000F8FE832E94.
Any help is appreciated,
MichaelYou need to set the Login Frequency (while registering the provider) to 'Once Per Session'. This will allow the portlet to track the user transaction state.
Make sure that you do not bounce the oc4j container in between the portlet operations, since this will leave the transaction into inconsistent state.
You have to ensure that whenever you bounce the oc4j container/provider mid-tier you logout of portal and login again.
This will solve the problem. -
I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working? -
When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?
iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal. -
Error 10035 occurred at cwdaq: The specified attribute is not relevant
Not sure what board this is supposed to go under since there isn't one for the PCI-6023E or the diagnostics utility.
I have a PCI-6023E card (several in fact) that we use. I have ran several through the online diagnostics utility and they most of the tests. The two that they do not pass are the Single Pulse - "Error 10035 occurred at cwdaq: The specified attribute is not relevant." and Scan Clocks I - same error message. The card seems to fuction fine despite this. I have not noticed any problems with us acquiring data through it. I was just wondering if there was anyone that could tell me what this error means.
Thanks,
StrataTechHi StrataTech,
You run these tests on several of your PCI-6023E's and all of them fail these two tests? Or do only some of them fail these tests?
I did a little research on the 6023E and these error codes. I found a known issue with the 6023E failing the Single Pulse test with Error 10035 every time. That particular error/test combo is a known issue and I would not worry about it. However, I did not find anything about the Scan Clocks test failing with the 6023E (but I did see it for another E series card).
There is also an old discussion forum from 2005 where a customer's 6023E failed the two same tests yours are. He did not have any other cards to compare against, so they went ahead and RMAed his device.
Here is my personal opinion:
If all of your 6023E's fail the same tests, yet pass all of the others then I do not think you have much to worry about. If your 6023E's all pass self-test in Measurement & Automation Explorer and you can use them in your DAQ applications without any problems or weird behavior, then I would assume you are probably okay and the errors are just a false positive.
If some of the 6023E's pass tests that others do not, then I would say we have a hardware problem.
Let me know what you think!
P.S. For future reference - if you're unsure which forum to post in, I would say hardware trumps software. Since your DAQ cards are getting errors, posting in the DAQ Hardware forum would give you a better chance of getting some replies. Forums like this are more for text-based programming and the LabWindows environment. No worries though, just a suggestion!
Micah M.
National Instruments
NIC AE Specialist - Test -
I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?
Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.
-
I recently connected my iPhone to my computer, iTunes would not start... I got error: "applcation failed to start because MSVCR80.dll was not found. Re-installing the appliacation may fix the problem." When I tried reinstalling it failed - it said insufficient permission. I have administrative rights... please, any help and/or ideas will be appreciated.
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
How do you grant permission for home sharing and authorizing? My mac did home share, but now says, "The required directory was not found or has a permissions error", when I try to authorize.
OK, I just got off of the phone with Apple and still no joy. They had me try a few things that did not work, then told me to Archive and Install, which did not either. Anyway, thanks for the additional help very note worthy, but still no joy. Also an email to iTunes Support took me here
http://docs.info.apple.com/article.html?artnum=93061
I have a Users/Shared folder but since the files we are talking about are invisible, I can see how it is structured.
And by the way I tried this one
http://discussions.apple.com/message.jspa?messageID=3577004#3577004
and it did not work. However, when I install a fresh copy of Tiger on the external it did authorize the computer and was able to play the downloads. But coping the invisible file to my boot drive was not successful. But , like I said the music did play when I started up from the external. So I guess that may be my only solution, unless someone can tell what the correct directory is and where it for iTunes downloads. -
I purchased a movie and downloaded it and when I conected my I Pod to my computer, now I get a message "The requested URL was not found on this server". What do I do to fix it?
Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems... -
SCOM agent install fails Error 80070035 - the network path was not found
I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
I added a specific rule to allow TCP 5723 and 5724
DCOM is enabled
I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
did install to) and the server has plenty of disk space available
I am not sure what else to look at so would welcome any ideas
ThanksHi Petro,
I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
Also check if your agents have the WMI service started and enabled ?
Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
Component A
Component B
Minimum Requirement
Root management server or management server
Agent
64 Kbps
Root management server or management server
Agentless
1024 Kbps
Root management server or management server
Database
256 Kbps
Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
Also post the event logs of the Agents which are in not monitored state for analysis.
SCOM Agent installation failure error codes
Error
Error Code(s)
Remediation Steps
The MOM Server could not execute WMI Query "Select * from Win32_Environment where
NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
Operation: Agent Install
Install account: domain\account
Error Code: 80004005
Error Description: Unspecified error
80004005
1. Check the PATH environment variable. If the PATH statement is very long, due to lots of installed third party software - this can
fail. Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
2. The cause
could be corrupted Performance Counters on the target Agent.
To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
prompt. Press ENTER after each command.
cd
\windows\system32
lodctr /R
Note /R is uppercase.
Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
How to manually rebuild Performance Counter Library values
http://support.microsoft.com/kb/300956
3. Manual agent install.
The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access
3. Inspect WMI health and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
Operation: Agent Install
Install account: DomainName\User Account
Error Code: 80070005
Error Description: Access is denied.
80070005
80041002
1. Verify SCOM agent push account is in Local Administrators group on target computer.
2. On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
Disable McAfee antivirus during push
The MOM Server failed to open service control manager on computer "servername.domain.com".
Therefore, the MOM Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
800706BA
1. Firewall blocking NetBIOS ports
2. DNS resolution issue. Make sure the agent can ping the MS by NetBIOS and FQDN. Make sure the MS can ping the agent by NetBIOS
and FQDN
3. Firewall blocking ICMP
4. RPC services stopped.
The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
on this computer, please retry the Push Agent operation after some time.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 80072971
Error description: Unknown error 0x80072971
80072971
This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
%windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
http://support.microsoft.com/kb/934760/en-us
The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Remote Computer Name: servername.domain.com Install account: DOMAIN\account
Error Code: C000296E
Error Description: Unknown error 0xC000296E
C000296E
1. Netlogon service is not running. It must be set to auto/started
The MOM Server detected that the following services on computer
"winmgmt;(null)" are not running
C000296E
1. WMI services not running or WMI corrupt
The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: C0002976
Error Description: Unknown error 0xC0002976
C0002976
1. Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
Install account: DOMAIN\account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
80070643
1. Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
Call was canceled by the message filter
80010002
Install latest SP and retry. One server that failed did not have Service pack installed
The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
share exists.
80070006
1. Manual agent install
Possible locking on registry?
http://www.sysadmintales.com/category/operations-manager/
Try manual install.
Verified share does not exist.
The network path was not found.
80070035
1. Manual agent install
The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
80070070
1. Free space on install disk
The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
80070079
NSlookup failed on server. Possible DNS resolution issue.
Try adding dnsname to dnssuffix search list.
The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
8007041D
80070102
NSlookup failed on server. Possible DNS resolution issue.
Verify domain is in suffix search list on management servers.
The Agent Management Operation Agent Install failed for remote computer "name"
80070643
1. Ensure automatic updates service is started
2. Rebuild WMI repository
3. DNS resolution issue
The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
80070652
Verify not in pending management. If yes, remove and then attempt installation again.
The MOM Server detected that computer "name" has an unsupported operating system or service pack version
80072977
Install latest SP and verify you are installing to Windows system.
Not discovered
Agent machine is not a member of domain
Ping fails
1. Server is down
2. Server is blocked by firewall
3. DNS resolving to wrong IP.
Fail to resolve machine
1. DNS issue
The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
8007046A
1. This is typically a memory error caused by the remote OS that the agent is being installed on.
There are currently no logon servers available to service the logon request.
8007051F
1. Possible DNS issue
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
of the Windows Installer service.
8007064D
1. Install Windows Installer 3.1
The network address is invalid
800706AB
Possible DNS name resolution issue.
Tried nslookup on server name and did not get response.
Verify domain is in suffix search list on management servers.
The MOM Server failed to perform specified operation on computer servername.domain.com
80070040
1. Ensure agent push account has local admin rights
The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
80072979
1. Correct DNS/WINS issue.
2. Try pushing to NetBIOS name
Gautam.75801
Maybe you are looking for
-
40GB 4th gen iPod not seen by PC or iTunes
I can't get my 40GB 4th gen iPod to connect to iTunes or even be properly seen by the PC (i'm running Vista). The firmware is the latest version. Not sure what else I can do to get it to connect to iTunes. My sister, running XP, couldnt get it to wor
-
I had a backed up iphone, but it was replaced by an empty file.
Recently i was having battery trouble with my 4S, so I reset it to factory conditions. I had had a backed up file full of my pictures, and contacts (All that matters to me). When I went to restore it from back up, the thing backed itself uip before
-
How can you reset your iphone when its disabled when to sync to a new computer
Someone help mhe & instruct mhe through it
-
hi, i am taking 2 FM's in rfc side and i am taking external definition in receiverside i.e in soap side rfc to webservices scenario could any one help me immediately. urs suman
-
Does anyone know when T-Mobile will be added to the list of supported networks?
Does anyone know when T-Mobile willbe added to the list of supported networks?