Error when displaying a field on Screen with Table Control

Hi,
It is going to 'Dump' when I am trying to display data on the screen with the help of Table Control. From the dump, What I have observed is , there is a field 'ZTSV_FSRDATA-ANZFEHLER'. If this field has negative value, then it is going to 'Dump' saying that the length is not enough. If it has a positive value then it is working fine. But the type of the field in the Internal table & on the screen are same.
Please help me to resolve this error.
I am posting here the Dump message also:
A conversion error occurred while the program was trying todisplay data on the screen.
The ABAP output field and the screen field may not have the same format.
Some field types require more characters on the screen thanin the ABAP program. For example, a date field on a screen needstwo characters more than it would in the program. When attempting to display the date on the screen, an error will occur that triggers the error message.
Thanks,
Sreenivas Reddy Maddi.

Hi Sreenivas,
   Refer this thread:
how to display negative values in a screen field of a screen
Re: negative values not allowed
Regards,
Sampath

Similar Messages

  • In the component overview screen of CO01 I want  to disable all  the field in  screen of table control.I want to make it as output screen only.

    Hi all
      In the component overview screen of CO01 I want  to disable all  the field in  screen of table control.I want to make it as output screen only.
    Thanks & Regards,
    Rajib.

    Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
    Maybe your goal is to stop then end user changing the component assignment that is automatically  detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

  • Error when displaying amount field in HTMLB Tableview

    Hi all,
       I am displaying some 'X' table in HTMLB Tableview and it has one amount field.But reference(currency) field of that amount field is in other table . I know it gives the error.
    Please tell me there is any other way to resolve this problem with out adding reference(currency)field in the same table?
    Thanks and Regards ,
    Harikrishna .

    Hi Hari,
    But reference(currency) field of that amount field is in other table . I know it gives the error.
    It will not give any error , you can use the currency key field of other table or structure .
    Alternatively you can use  predifined type DEC instaed of CURR  .
    Regards,
    Anubhav

  • Add Custom field to standard screen with table control

    Hello,
    I need to add two custom fields to a standard screen in CAT2 transaction(not using any screen exit).I will be given SSCR key.The standard screen (screen no. 2100) only has a table control.
    How can I add the custom field such that it appears as a field on the screen when CAT2 transaction is opened.
    Do i need to write any code?
    I'm new to ABAP so could you please give a detailed explanation.
    Also, do i need to change the 'fixed columns' field in the table control?
    Regards,
    Monica.

    hi,
    1) find the screen
    2) add new fields to the screen
    3) program PBO and PAI
    regards,
    Wojciech

  • Screen with table control which works like SM30

    Hello,
    I have a screen with some parameters in order to obtain some records from
    a custom table. In the same screen I must insert a table control which
    shows the extracted records.
    This table control has to work exactly like transaction SM30, that is the
    user can modify, insert, delete or copy a record.
    Does anybody know if exists a way (or method) to include this transaction
    in the table control ? Or I have to use custom control to obtain this ?
    N.B. the user wants a screen with parameter and table control (or custom control)
    and not a call function to transaction sm30.
    I thank you in advance.                      Paolo.

    Hi Rob,
    thanks for your interest; no it's not a reason of authorization, but simply
    the user wants to modify a report that actually works with some parameters
    at the top of the screen and a customer control which shows an Alv_grid
    with the extracted record;
    Now the user needs to modify this records (insert and delete) directly from
    this list. So I don't know if there's a way to obtain this goal without replace
    the custom control with a table control.
    The screen look like this:
       Param.1  XXXXXXX
       Param.2  XXXXXXXXXXXX
    Custom Contr. with ALV_grid  (for extracted record)
                                                                             Regards.
                                                                             Paolo.

  • Read and display the field values in the table control

    Hi Experts,
    I am new to the Table Control. I have created table control using the wizard where i have mentioned the ztable while creating which consist of the following fields.
    Item Number
    Material number
    Material Description
    Net Price.
    I would like to retrieve the material description, Order quantity and Netprice based on the selection of the material number from the table control field.
    Thanks in advance.
    Sunil Kumar.

    Hi,
    Try to implicate the following code to your requirement..
    PROCESS BEFORE OUTPUT.
    PROCESS AFTER INPUT.
      LOOP AT itab INTO wa_itab.
       CHAIN.
        FIELD wa_itab-item.
        FIELD wa_itab-material MODULE fetch_desc_price ON CHAIN-REQUEST.
        FIELD wa_itab-mat_desc.
        FIELD wa_itab-price.
       ENDCHAIN
        MODULE modify_itab.
      ENDLOOP.
    Inside the module.
    MODULE fetch_desc_price INPUT.
    SELECT maktx FROM makt INTO itab-mat_desc
    WHERE matnr = itab-material.
    SELECT STPRS or resp fld from MBEW
    INTO itab-price WHERE matnr = itab-material.
    ENDMODULE.
    MODULE modify_itab INPUT.
    MODIFY itab from wa_itab INDEX <table control name>-CURRENT_LINE.
    ENDMODULE.

  • Problem with Table control lines

    Hi Friends,
    This is the problem with table control lines:
    I have screen with table control and I would like change the table control lines dynamicaly.
    Exp:
    In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
    here is the code:
    Initial values in gt_scr400 = 8
    Initial values in tc_scr400 = 8
    Now added one more recor into gt_scr400 , now gt_scr400  = 9.
      LOOP AT   gt_scr400
           INTO wa_scr400
           WITH CONTROL tc_scr400
           CURSOR tc_scr400-current_line.
      ENDLOOP.
    I have used this logic :
      DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
      tc_scr300-lines = g_rec_300.
    but its not modifying the lines in my table control.
    How to change the TC lines based on ITAB total records.
    Thanks,
    Sridhar

    there is a field in TableViewName-xxx
    don't remember the exact field name for (total no of records)
    you can check it in debug.  when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

  • Error when displaying xellerate form

    Hello,
    I have the following error when displaying the form of any xellerate users :
    ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
    All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
    <Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
    <ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
    </Attribute>
    What is the problem with my attribute definition ?
    Thanks for your help,
    Kind regards,
    mdadikn

    Hello,
    I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
    From the Error Log:
    Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
    Line with issue from FormMetaData.xml:
         <Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
              <ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
    </Attribute>
    Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
    Thank you,
    Ryan

  • Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer

    dear all,
    I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?

    I am also getting the same error, using 11g.

  • Error when tryying to burn ny dvd with Encore

    I am getting a error when tryying to burn ny dvd with Encore
    PCG "baseball_and_more" has an error at 00;00;00.
    Internal software error:0% line basball_and_more -PGC Info name == baseball_and_more ref == Bpgc, time 00;00;00
    Anyone know what this is due to?
    If I add another clip before the base_ball_and_more then I get the same erro but at 16:45:0I 4
    This seems related to changing the M/N field in the adobe media encoder. If I use defaults while encoding in premier
    I dont get them error in Encore. But if I change the defaults ( hope fully to get better DVD results) I get the error.

    First, back on the main page http://forums.adobe.com/community/encore enter
    pcg
    into the SMALL forum search window on the right and read previous discussions
    Second, try exporting from Premiere as DV AVI type 2 and give that to Encore... use the Automatic encoding setting and let Encore make the decision on what will best fit on a DVD

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

    I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

    Make sure that no other Macs are backing up at the time.
    Pull the power cable from the back of the Time Capsule
    Count to ten
    Plug the power cable back into the back of the Tme Capsule
    Wait a few minutes, then try a backup again.

  • My 24" iMac display suddenly shows blank screen with funny pattern

    My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

    My 24" iMac display suddenly shows blank screen with funny pattern after bootup. Anyone know the cause? http://twitpic.com/51hih7 http://twitpic.com/51hihw http://twitpic.com/51hiiv

  • In reports, i want to display currency field out put with diff currencies

    Hi all
    in reports, i want to display currency field out put with different type of currencies like 1st record in rupees 2nd record in dolors 3rd record in       
    Euros. for this i should not use any tables and any currency fields and any functional modules. pls give replay urgently.

    Hi swamy,
    so sorry, but you have to use some of the objects you do not want to:
    Currency values in ABAP are stored in currency fields (type CURR). If they are stored in structures or database, every CURR field must be connected to a CUKY field (currency key).
    Displaying data using WRITE statement four output on a list is obsolete technique, you may use the use WRITE with the option CURRENCY c to format according to currency c in table TCURX.
    SAP recommends to use ALV technique. If you use ALV to display structure data, then create a dictionary structure with currency value and currency key. The rest goes automatically.
    Believe me: It is much easier and more reliable.
    Regards,
    Clemens

  • Get 'Generic Error' when attempting to import .mov files with transparency?

    I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
    I have uninstalled the DVCPro Codec, but it didn't help.
    I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
    I've seen this issue on the web, but never a solution? Anyone?

    Hi Terence,
    I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
    Regards,
    Søren

Maybe you are looking for