Error when encoding final cut pro x project, will compressor help?

Having a problem trying to export a FCP X project.  As it is exporting about half way through it will come up with this error message:
The Share operation export file has failed.  Quicktime error -50
I noticed in the project library that there is an error icon next to this project and not sure why.
I made a duplicate project and cut it in half to see if that would work and getting the same error message.
How can I trouble shoot this and if I purchased Compressor would that help me export this project?
I am on a tight deadline and this has never happened before, any ideas?

OK, you are talking to a newbie with FCP X...came from iMovie and did a number of projects with FCP X already but don't know the ins and outs of this program. If you could talk me through the steps and where to find Repair Permissions (is that using the disk utility and repairing permissions there?), Would I trash all the Render files here including the folders, will they rebuild?, Where do you turn off the background rendering?
I should mention that I took an older project and exported it to see if it would work and it did, without a problem.  I am now making copies of this project and removing sections to see if I can isolate the corrupt files, if there are any.
FLASH....I just found the corrupt files. The last section I removed seemed to be the issue. I tried to render it again and it worked fine.
Now I will have to go back and see if I can narrow that section down to find the file that is causing the issue.  WOW what a mess. Is there any program that can identify these issues that doesn't cost as much as FCP?

Similar Messages

  • Error when downloading Final Cut Pro 10.1.3

    My specs
    When I first got his MacBook about a month ago, I was still using Mavericks. I bought Final Cut Pro and it downloaded just fine. I upgraded to Yosemite shortly after it became available.
    I found soon after that supplemental updates for FCP were hard to install properly (I would press the Install button, it would say Installing then go back as if nothing had happened). After consulting a few articles, I decided the best to do was to delete FCP and re-install it.
    I consulted this article, which explains how to thoroughly uninstall FCP on Mavericks Final Cut Pro X 10.1: How to remove and reinstall Final Cut Pro X - Apple Support and followed its directions. Then I restarted my computer.
    When I try to download and reinstall FCP from the Purchases section of the App Store, I watch the download bar reach 2.28 GB (full download) then receive an error message.
    This is what I'm left with:
    I've done this a few times. I'm not sure what the problem is. Any suggestions?

    This is what's in my Applications folder:
    I've seen this several times also. I'm stumped.

  • Sound loss when moving Final Cut Pro X project to Quicktime.

    This is a 33 minute football highlight film with music, live sound, radio calls, title screens and transitions.  The video is HD and transfers flawlessly, but the sound stops after 90 secomds amd never returns.  Not sure what I am doing wrong.  Have made 35 player highlight videos without an issue, but they are about 10-12 minutes long each.  So, I cut the video to 20 minites to trial a shorter version, and the sound cuts out at the same spot.
    The video pkays back perfectly in Final Cut Pro X.  Sent it to compressor directly, and aftr 17 hours, I got a "fail" message.
    Can someone help me?  This video is scheduled to be shown at a banquet on Friday night, and I can't show it if I can't get it to a bluray disc
    Thanks

    Last week I lost my audio shortly into the video.
    It disappeared around the point of the first transition.
    After deleting that transition and re-exporting the audio survived to what had been the second transition and so on.
    After deleting all the transitions the audio was perfect.
    I then put back the transitions and magically the video exported with no audio loss.
    At the time someone else seemed to have the same problem so it may be some bug or glitch.
    My solution was to delete all transitions and replace.

  • How to rename folder in Final Cut Pro X project library?

    How to rename folder in Final Cut Pro X project library? I can't double click on folder, when I right click it just gives options to erase. Can someone help?

    I think you may have misunderstood - the question is regarding renaming a project "folder", not a project name.
    Still, the accepted answer here makes no sense to me at all - it's about renaming an event. So we're all confused ;-)
    BTW as of 10.0.5, I still cannot rename a project folder while background tasks are running - no clue is given that this is what's going on, second-clicking on the folder just (frustratingly) does nothing. When background tasks finish, it works again.

  • When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned mo

    When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned a project using iMovie afterwards. I filmed a funeral service and family get together afterwards but can't share it with family and friends...plz......suggestions/recommendations/condemnations........

    Another update to my burning problem...in my movies folder there is an img file (states it is a classic disk image-2.82GB) after I have tried burning a DVD unsuccessfully and when I open the img file I see 1) AUDIO_TS AND 2) VIDEO_TS files. I 'control' clicked the file and tried burning this folder onto a disc. Result it seemed to burn both files onto DVD but still couldn't view video.

  • Export Final Cut Pro 7 project to open in FCP 6?

    Is there any way to open a final cut pro 7 project in final cut 6?
    We have a bunch of older Macs that won't run FCP7, but we use for training but our hope was to upgrade the newer machines to the new Final Cut Studio, but it would be great if we could create something on the newer machines, that we could transfer to the older ones.
    We tried XML export, but it didn't look like it included filters and such, so we are wondering if there is any other way?
    Regards,
    Karl M. Moberg

    Nope. no other way.
    Shane

  • When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

    Glad you found the answer.  But something seems wrong.  FCP should be able to assign the scratch disk to your startup drive.  It's not advisable, but it should be possible.  You might want to try and figure out what's going on before what ever's going on cause other problems.

  • I am not able to share final cut pro x project to iTunes.  it continues to say waiting.

    I have not been successful in sharing a final cut Pro X project to itunes.  It says waiting.   I can cancel it, of which I have canceled about ten submissions now, but each time it says waiting.  What am I doing wrong here?

    I am not running a compressor.   I am running the 30 trial version of Final Cut Pro X.  I have created and finished a project.
    I am running a brand new iMac with the latest OS version.    First I a highlight the project to share.  I assume just by clicking on it.   click share - apple devices - then i select for which machine, (imac) i want it to render it for-select add to itunes- and click share.
    Then it opens up the share monitor shows the project in question and says waiting.  I can pause it, cancel it but I can not get it past waiting.  the time registry under the info selection says 0.00 minutes but still waiting..
    I am selecting the project correctly?   I have made only one project.

  • HT3775 I am downloading a Final Cut Pro x project directly to Quicktime.  The movie will not play, stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

    I am downloading a Final Cut Pro x project directly to Quicktime.  The movie will not play stating Quicktime doesn't support the codec. I currently am using Quicktime 10.1 on my Mac OS X Lion

    Wow. Okay...
    I'll let the real veterans in this forum tackle your issues one after the other. But, I can tell you, all will be well.
    My only comment would be re: your computer specs:
    BJReis wrote:
    .  This may be due to somewhat older equipment:
    GHz Intel Core Duo MacBook Pro with a 4GB memory computer with Ddr3 running OSX 10.8.4
    To be completely honest, FCPX is a RAM hog. It just is. But, RAM is relatively cheap, and the pay-off is good.
    4GB is right on the edge, IMHO. 16G is ideal.
    I wish you luck, hang in there, and standby for more help.

  • I need to remove a rig/wires from my final cut pro 7 project.  Can Apple Motion 4 remove wires/rig?  Are there any rig removal plugins for final cut pro?   Thanks!

    I need to remove a rig/wires from my final cut pro 7 project.  Can Apple Motion 4 remove them?  If not can anyone recomment any plugins for Final Cut Pro or Motion that can remove them.  Thanks!!

    In Motion 5 there is a plugin from CoreMelt called "SliceX" that does this.  But I don't know anything in Motion 4 that will do it.  You may get more help posting in the appropriate "Final Cut Studio" section of this forum.

  • How do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    how do i engage my 8 core mac pro to use all it's cores when using final cut pro and other applications that need processing power? at the moment they seem to be idle...

    First, did you use Setup or Migration Assistant? That can happen when coming from a PowerMac or sometimes even from another (Intel) Mac.
    Second, wait for the next version of Final Cut due very soon to ship (may have to wait for the ".1" of course to clean up any early issues.
    Final Cut Pro - Wikipedia
    There are a few apps that are better.  I think you can run multiple instances of Handbrake for one.
    I've read about and wanted to try PowerDirector 9 (Windows)
    PowerDirector 9 video software
    video editing software Wiki

  • I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    I recently upgraded to IOS 10.9.5 and now I can't export anything from final cut Pro X. Could somebody please help me with this?

    SSign in to the App Store using the Apple ID that was used to purchase the software.

  • Hello guys, so help me, if i will buy a final cut pro from appstore, will i have a .dmg or other type of file, for reinstall it in another mac?

    hello guys, so help me, if i will buy a final cut pro from appstore, will i have a .dmg or other type of file, for reinstall it in another mac?

    No. You simply sign in to the App Store and download it again. AppStore knows that you already paid for it.

  • Getting error message in Final Cut Pro X for frame 13142 when sharing

    I am sharing a project to Master File and I get an error message: error occured when creating frame 13142.  How can I find that frame?

    I had frame generation error last nigtht trying to make master file  on a short 5 mintue simple video I built. 
    It said error was on frame 6797.
    I seach for soluitons and nothing seem to help.
    I tried copying project contents to new project and that still failed with frame error 6797.
    I then reviewed that frame and it was the one time in project I used any special affects for movement of image, Ken Burns and  Key frame transform affects on a freeze frame image.
    I createa new third project copied contents in and remove the freeze frame image.  added freeze frame image back into project and only did Ken Burnes affect without key frame movement.
    i was then able to complete geneeation and share project.
    So if you get a frame generation error check that frame and see what special affects your using.  There maybe a bug in FInal Cut Pro X when you mix and match affects on one object in a project.
    hope this helps someone... I was stuck for several hours on this last night.
    bill sanderson

  • L6TWG plug in error message when launching Final Cut Pro 7

    Final Cut Pro Won't launch.. getting this error message instead..."Final Cut Pro quit  unexpectedly  while using the L6TWG plug in".... WTH????  Any help here????

    See this thread:
    Final Cut 7 crashes when loading plug ins!
    MtD

Maybe you are looking for

  • Inline HTML + Inline Text + attachment all 3 in 1 mail  in Outlook

    Hello All, I am trying to compose and send a mail using JavaMail library using which I can send a mail with 1) HTML in the body of the mail and 2) 4 -5 line of text (along with HTML , not as alternative text) and 3) an attachment (which will also be

  • Question about framerates and compression

    A few months back I've been to Nepal, enjoying the people and trekking. I carried my Canon HV20 (1080i-25 fps) in a small backpack and I bought a small Canon IXUS100 fotocamera (with video 720p-30fps) as a backup and carried it on my belt. Back home

  • HT5278 i keep getting an error occured installing iOS5.1.1

    I keep getting an error message, as i try to install the update ios5.1.1. How do I fix this problem? It has not let me install since receiving the message. HELP

  • Receiver Determination for an Outbound Message to Multiple Receivers

    Hi, I have a scenario in which one Single Outbound Message needs to be sent to multiple receivers. 1. I have set up the Receiver Identification correctly i.e I can see the Receiers and their end points. 2. The problem is that when the first Message f

  • BPM "Expression must return multiline value"

    Hi i was Creating a scenario file to file Message Split using BPM. in that i have done all the IR part and after that i created integration process.but when i m check this Integration process, i got an error like "Expression must return multiline val