Error when executing a report in Bex analyzer"
Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao
Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet
Similar Messages
-
'Query has not yet calculated' When executing BW report in Bex
Hi, all
There is message 'Query has not yet calculated' when execucting BW report in BEx.
what's the reason? How to solve this issue?
however, when I change the filter to one or several employee number such as employee information report, there will be one or several records in the report.
Anyone can help me?Thanks very mcuh.
Carinaok.
While using exception aggregation, you need to give a reference characteristics. You might have given 0calday for the same for 0ANSALARY ( SUM LAS ) and your infoprovider does not have 0calday and the report is unable to calculate the result based on 0calday.
This will obviously throw and error but you will be able to see the result. But the result will not calculate last sum for 0ansalary correctly.
For this, please check the infoprovider design. You can use reference character other than 0calday and make sure that, the reference time characteristics is present in your infoprovider.
Cheers
Chanda -
SSRS 2008 R2 rendering error when executing a report
The value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?SonyaThe value '1' is invalid. Valid values are between '0' and '1'. (rrRenderingError)
I am receiving the above error when running the report in SSRS 2008 R2. It has run find in the 2005 version. After research, I read that this issue caused by tablix split on a new page or something. However, I have not found anything to be the resolution. I
installed the latest hotfix that I thought addressed this issue but still not working. Any suggestions outside of touching the report?
Sonya
We too are encountering this problem with reports migrated from 2005 to 2008. We are getting the rendering error only when trying to use the paging controls to navigate forward through the report. This is on SSRS 2008 R2 running SharePoint Integration. When
the result set is empty we get the tablix errors mentioned instead. The reports ran fine prior to migration to SSRS2008. -
Error is coming when executing the report in bex
hai experts,
any body help me in this matter.
when i execute the qurey in bex its showing error message coming with popup box.
Error is showing like this.
"no value found"
" Exception 1 when calling WB_HTML_HELP_URL_GEToccured"
but when i click on "OK" button its showing result.can any body tell me why its showing error message like this .
regards
maheshyou default method is WEB so its useing URl to open the results, change the setting to use analyzer(XLS) and update your GUI Front End patch.
-
Error when executing query in the Web Analyzer...
Hi All,
I am using 2004s and when I try to execute the query in the BEX browser I get the following error. It works well in the Bex analyzer. Do I need to have some java plug ins for this to work?
http://bi6.domain.com:50100/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex%3FQUERY
Thanks,
Arthur.you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation -
Error when unning the report in bex.
Hi All
I have data in multi provider , based on multi provider there is some reports is there,
when i run one report it run sucess fully
but while running the another report it gives below warning
warning Hierarchy 0RGEH in version 000 was not found for key data 20090224.
when i click ok then it give below error message
Abort system error in program Cl_Rs_Base and form Get_Max_Timestmp-01-
Abort system error in program saplrrko and form INITIALIZE_DATA_ACCESS-01
any body know about this problem plz help meHi,
the message implies that the hierarchy from ur info object 0RGEH is not in active state.
please check whether u have the hierarchy loaded correctly in the back end for this info object, if not load the hierarchy and then try to execute the report.
hope it helps.
Regards,
Rathy -
Error when executing Planning function in BEx Web
Hi everyone,
When executing a planning function in BEx Web, via Web Application Designer, I am getting the following error message.
ABEND BRAIN (178): Common entries are not permitted for plan queries and input queries
MSGV1: Aggregation level name
Where do I go wrong?
Thanks in advance, hope this is enough info.Hi Geerts,
If i understood well, you have some problem with your query. Please check the query that you have on WAD and wich characteristics did you have on your level (the level on wich the query is based).
Pls, check the correct execution on that query on Query Designer too. That query is a plan query? it`s ready for input ?
Hope this help
Natalia. -
Error when executing MSS report PWPC_RPT_START_REPORT_TEST in Se38
HI Experts,
when am executing the program we have following problem.
Error when excuting function z_perf_eed_profmat.
values in selection screen:
Scenario : zall(custom) and fcode z_perf_eed_profmat (custom).
Please help me on this.
Advance thanks,
satyaPlease try converting the standadrd-delivered scenario RPT0, then check
out the things.
Also problem may be that your function code names contain
the character '&'. This causes a problem when the selected function
code is passed to the ITS-WebGUI as a URL parameter. Please use only
standard characters (A..Z and _) when you define a function code.
Then it should work.
Please go through the following link also
http://help.sap.com/saphelp_erp2005vp/helpdata/en/3a/
3198408d953154e10000000a1550b0/frameset.htm
Please test in backend using Se38 > PWPC_RPT_START_REPORT_TEST
The Reporting Iview in the portal has the Report category type, by
the report category type is set to "RPT0". Therefore, when the
application is launched, the reporting category type is also sent as URL
parameter to the backend system. As of ECC 6.0 only the reporting
category type "RPT0" is supported. ensure this is set for your custom reports if you are using own scenarion
then set in the Iview property of reports as well
ie example
1)Change the Iview property "Scenario" of the Reporting iview from
"RPT0" to your own "ZRPT", than this set of reports will work. however,
the standard reports will not work.
pwpc_convert_mdt_to_lpa >>
The following list of reports have been converted. -
Hi,
When i am executing a report its displaying , "User master record is not sufficiently maintained for object auth on".
Its a authorization issue.
Please suggest how to solve this.Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet -
Crystal reports and SAP BI--------BAPI error when executing the report
Hi All,
I am getting a problem accessing the data from the SAP BI system into the crystal reports.I created a report in CR2008 on a query built in SAP BI.When I execute this query,I am getting the following error.
Database Connection Error:'BAPI Error #:0
Error Occured when starting the parser:timeout during allocate / CPIC-CALL:'ThSAPCMRCV"
CAN ANYBODY HELP ME OUT Please.
Thanks,
Kumar
Edited by: Madan Koka on Dec 15, 2008 5:47 PMHi,
I have the same problem. I can create report in Crystal Reports on a query but can`t get data from BW.
Thx in advance for help
Jacek -
Error when executing the report
Hi Friends,
I have Built a query and when i run i get the selection screen and when i enter value and execute i am getting the following error "Not authorised to run report".
Can anyone please let me know what should i do to get this running.
Thanks in Adv
BNIf there is a anuthrization object in the infoprovider on which report was build, make sure you have the * access for that infoobjects.
If you are using BI 7 go to t code rsecadmin and check what are infoobject available which is authrization enebled
and then check they are used in you infoprovider. and u have that access or not.
If you dont have the access create one authrization object for that object and ask basis to assign the authrizaion object to S_RS_AUTH -
Error when executing BI report thro EP
Hi Gurus
I am trying to run a BI report EP .
I assigned a query to a web template & executed the query it is fine but when I assign the query string of this template to the i-view in EP and execute this i-view it throws the following error
You do not have the authorization for component ZTEST_DEMO_REPORT
DP_1: Unable to load query ZTEST_DEMO_REPORT
FYI this's the query assigned to the web template.
please advice on this at the earliest.
thanks in advance.Hi,
Activate the authorization trace and run the same report in webtemplate and then provide the same trace file to your security team. Then they could assign you the missing authorization object to your user.
Tcode - ST01 select the checkbox Auth Trace and click on General Filters --> Give your user name and then click on Trace on --> and run the query in Portal as soon as you get the auth message you can de activate the trace at st01 which you activated before. Then click on Analysis tab and get the trace file downloaded to your local system and send it to your Security team..
It should perminantly solve your issue when ever you see the similar message infuture.
Thanks
Srikanth. -
Portal runtime error while executing BI report through BEx Query designer
I want to execute a query from query designer but when I execute it the following error occurs -
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 04:30_30/04/11_0008_35740651
Refer to the log file for details about this exception.
I have checked log, the error displayig in log is,
ACCESS ERROR: Authorization check for caller assignment to J2EE security role SAP_J2EE_Engine:administrator
Kindly help me.
regards
nkDear Friends
I have the same with this problem
Please help us to resolve this problem
Thanks and best regards -
Error when Executing the Report - No Authorization for Multiprovider
Hello Experts,
After the upgrade has carried out in my Quality system, I'm unable to execute a query because of the authorization issue with Multiprovider. But earlier the same Authorization was assigned to the my ID.
The Role in Q and the Role in P is same. Right now P is with 3.1 and Q is with BI7.
In both the system I have the same Role. But in Q it says that: Error You have no Authorization for Multiprovider XXXX
This is happening for only one Multiprovider in Quality system. There is no change in the Multiprovider from earlier structure to the present structure.
Can anyone give me any idea as to how to solve this issue?
Many thanks in Advance..
Thanks
Raman.. This is Emergency for me..Ok,
Pick up a test user (or your user) and go to transaction su01.
Check the roles that are assigned.
Double-click in each one and choose display. Go to tab authorizations and click on the glasses icon of displaying authorizations data. Then go to menu->Utilities->Technical names On.
You should see the tree with the node name Business Information Warehouse (technical name RS), if you don't see this in this role, than the issue it's not in this role, go back to su01 and check another role the same process until you find this node.
If you expand this node you'll see another nodes, one of them is called Data Warehousing Workbench - InfoCube (technical name S_RS_ICUBE). And you probably can't find another node called Data Warehousing Workbench - MultiProvider (technical name S_RS_MPRO), this is the new node you want.
In the node S_RS_ICUBE expand it and you'll see the authorizations given to InfoCubes with activity, InfoArea and InfoCube. In the older system BW 3.x this object was used to give access to InfoCubes, but also to MultiCubes. So you have to find the role that has this object with InfoCube with the value of MultiCube or with all values, for example, you could have this node in your role with the following values:
Activity 03
InfoCube Subobject DATA
InfoArea ZFI*
InfoCube ZFIAA_C11, ZFIAA_C13, ZFIAA_M02
or with:
Activity 03
InfoCube Subobject DATA
InfoArea ZFI*
InfoCube *
or with:
Activity 03
InfoCube Subobject DATA
InfoArea ZFI*
InfoCube ZFI*
Something like that. The first example give access to specific InfoCubes and one MultiCube, the second one you'll have all the InfoCubes and MultiCubes inside the InfoArea started with name ZFI and the third one you'll have all InfoCubes and all MultiCubes started with name ZFI that belongs to the InfoArea started with name ZFI also.
Got the picture?
So in BI 7 MultiCubes are now controlled by the new object S_RS_MPRO instead of the older object S_RS_ICUBE. What you should do is go to transaction pfcg and insert the role you want to include (or change these new values, i.e., the role that has the access to the MultiCube values inside the object S_RS_ICUBE which the query is built on) the new object S_RS_MPRO and click on change. Go to tab authorizations and click on change authorization data. Then click on manually (ctrlshiftF9) and insert the object S_RS_MPRO. Inside this new object you should insert the authorization data for accessing your multiproviders.
In the 3 examples above you should create these 3 entries:
Activity 03
InfoArea ZFI*
MultiProvider ZFIAA_M02
MultiProvider Subobject DATA
or with:
Activity 03
InfoArea ZFI*
MultiProvider *
MultiProvider Subobject DATA
or with:
Activity 03
InfoArea ZFI*
MultiProvider ZFI*
MultiProvider Subobject DATA
Therefore you continue to have the object S_RS_ICUBE to control only the InfoProviders plus the new object S_RS_MPRO to control the MultiProviders.
Now generate the profile(s), save the role(s) and test it again!
Diogo. -
Unknown error when executing MDX when refreshing Crystal Report with BEx
Hello Experts,
I have created a Crystal Report (Crystal 2008 SP1) with BEx Query (7.10) and have been able to refresh successfully when the SAP_ALL authorization is included in my user role. I don't want my end users to have SAP_ALL so I created a role and assigned the authorizations recommended in the SAP Integration Kit for BusinessObjects 3.1 Install Guide.
When I run the report as one of the users assigned to my new role I get the following error in the trace file.
ERROR: .\crdb_bwmdx_execution.cpp [200]: l_bapiGetStreamInfo failed with return code RFC_RC = 0 Exception: BAPI Error: BAPI Error #:0
Unknown error when executing MDX
2188 6556 Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188 6556 Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
2188 6556 Caught DbError #1 with Message 'BAPI Error #:0
Unknown error when executing MDX'
I tried all the Fix Packs (ie 1.1., 1.2 and 1.3) for XI 3.1 Integration Kit to try resolving the error but it didn't work.
The same query works fine in BEx Web when running as one of the users in the new role I created for Crystal Report users.
Are there any other Authorizations that I need to include in the role?
Cheers.
Paul.We have been able to identify what causes the MDX driver to error and I will explain what we are trying to implement with the hierarchies.
Firstly, we are creating reports of the HR cube Mutliprovider using the SAP MDX Driver which works well when there are no authorization analysis set on the cube. But with the authorization analysis set for on 0ORGUNIT for BEx Explorer Crystal returns the MDX error.
Each of the Business Unit managers are assigned to an Organization Unit that will be used to restrict the employees that will be reported. To restrict the Managers to only see their Org Unit we have set the 0ORGUNIT object to use authorization ananlysis and a custom authorization variable to return only data for the Org Unit they belong too.
In Crystal this works well when a manager has an Org Unit that is a head department of other Org Units. This scenario will give Crystal the NodeID and Parent NodeID to create the hierarchies in the report. But when a manager does not have any other Org Units beneath there own department then Crystal doesn't have a Parent NodeID to create the Hierarchies with the NodeID. In the RFC trace I can see an error when Crystal is trying to get the Parent NodeID but the user is not authorized to that Org Unit then it throws the error.
We have got a temporary workaround which is to create the managers a dummy Org Unit below their own department. The workaround will do for now but shouldn't the MDX driver be able to recognise that it has returned the last level in the Org Unit Hierarchy and not return an error?
The customer is looking for a product fix as they believe this should be handled by the driver. Is this a bug or a limitation of the product?
Paul.
Maybe you are looking for
-
Change Delivery date in Sales Order
Hi all I want to change Request Delivery Date in Sales Order. But when I changed Request Delivery Date system appear" The default date is not copied into existing schedule lines" And Delivery Date didn't change.Could you tell me how to change Deliver
-
Maximum Line items in Sales order/ Delivery/ Invoice
Hi guru's Maximum line items(SAP Standard) in the sales document/ Delivery Document / Invoice? Thanks and Regards Srinivas Kapuganti
-
this is the issue I am having it keeps creashing, I have older mac pro 2x 2.8 quad-core, 24 gig ram 2.5TB storage on system drive, so should be no issues there, I updated to Mavricks just so I could get this update, I need for 5k redcore epic edit. I
-
Importing packages at the same level
Hi, I have two packages A at B (with some classes) in the same level. How do i import the classes from one packages to other.......
-
Evaluting BODMAS expression using a Java Class
Hi, How to evaluate an BODMAS rule in java class. I will be getting some formula and i should evaluate using bodmas rule. Can any help me out in this.