Error when executing the query.

Hello ,
            I have some customer exit variables used in my reports , and when I execute the report I get an error like " My variable name cannot be interpreted as number " The way I declared the variable is of customer exit type and as a Number, in my customer exit I'm using it as 'My variable" in computation , is this why ?
thanks ,

Hi Rakesh ,
Are you talking about a formula variable of type Customer Exit??? - Yes
Then if you have mentioned it as Number then it can only hold Numerical value and nothing else. - I dont see anyother option (dat type) which suits my rek. I need to declare a variable where user can enter a value like 2,3 ...12. And I have to use this variale in my customer exit code.
Diffferent options availble in BEx for a formula variable are ,
Number , Amount , Quantity , Price.
And in my customer exit I'm using as  Y = X + 'My customer Exit Variable'.
Can you please give me your thoughts.
thanks alot.

Similar Messages

  • Error when executing the query or refreshing the workbook

    Hi All,
    Whenever I am trying to execute a query or refresh a workbook a error message is poping up saying that
    Error: <internal error> Problem when writing table: E_T_cel.
    I face this error in few of the queries and when i refresh workbooks. These queries have lot of calculations and filters and they sum up lot of records.
    Any help greatly appreciated.
    Thanks
    Raj.

    Hi Maik,
    Thanks for reply, I went into tran sm21 but i could not understand the messages there. Below is the list of messages in sm21
                         System Log: Local Analysis of cdsap9d                    1                                                    
    From date/time............. 04/20/2005 / 10:00:00
    To date/time............... 04/21/2005 /        
    User....................... KADALPR    
    Transaction code...........                    
    Terminal...................        
    Task.......................  
    Problem class..............           
    Further restrictions.......                                                                               
    Sorted ? ................ SOFI
    Pages with single entries 00000100
    With statistics............ 
                         System Log: Local Analysis of cdsap9d                    2                                                    
    Time     Ty. Nr Cl. Tcod MNo Text                                                                                Date : 20.04.05 
    12:58:10 DIA  0 100      R49 Communication error, CPIC return code 019, SAP return code 728                                                 
    12:58:10 DIA  0 100      R5A > Conversation ID: 29858195                                                                               
    12:58:10 DIA  0 100      R64 > CPI-C function: CMSEND(SAP)                                                                               
    12:58:10 DIA  0 100      R68 Perform rollback                                                                               
    12:58:10 DIA  0 100      R47 Delete session 001 after error 003                                                                             
    23:54:49 DIA  1 100      R49 Communication error, CPIC return code 019, SAP return code 728                                                 
    23:54:49 DIA  1 100      R5A > Conversation ID: 44959947                                                                               
    23:54:49 DIA  1 100      R64 > CPI-C function: CMSEND(SAP)                                                                               
    System Log: Local Analysis of cdsap9d                    3                                                    
    Time     Ty. Nr Cl. Tcod MNo Text                                                                                Date : 21.04.05 
    09:32:50 DIA  2 100      R49 Communication error, CPIC return code 019, SAP return code 728                                                 
    09:32:50 DIA  2 100      R5A > Conversation ID: 83536783                                                                               
    09:32:50 DIA  2 100      R64 > CPI-C function: CMSEND(SAP)                                                                               
    Reading:  
    Number of records read.........       2777
    Number of records selected.....         11
    Old records skipped............       2733
    Records of invalid users skippe         33
    Further selection:  
    Number of records read.........         11
    Number of records selected.....         11
    Number of records printed......         11
    End of system log
                         System Log: Local Analysis of cdsap9d                    4                                                    
                        C o n t e n t s                              
    Contents              Page              Start            End  
    Selection criteria     1
                           2        20.04.2005  12:58:10 - 23:54:49
                           3        21.04.2005  09:32:50 - 09:32:50
    Contents               4
    End of program  -
    If you can help me out as where to look at these messages then it great.
    Thanks,
    Raj.

  • Serious system error while executing the query: java.lang.OutOfMemoryError

    From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
    <ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
    {ld:ABC/Test}createTest:1
    java.lang.OutOfMemoryError: Java heap space
    We do not want to increase the heap size. Is there any other way we can solve this problem?

    In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
    Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
    Input xml:
    <ns1:createTest>
    <ns1:createTemps>
    <ns0:createTemp>
         <ns0:field1>1</ns0:field1>
              <ns0:field10>test1</ns0:field10>
    </ns0:createTemp>                
    <ns0:createTemp>
         <ns0:field1>2</ns0:field1>
              <ns0:field10>test2</ns0:field10>
    </ns0:createTemp>
         </ns1:createTemps>     
    </ns1:createTest>
    each ns0:createTemp represent a row that need to be inserted in the table.
    When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
    <ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
    {ld:ABC/Test}createTest:1
    java.lang.OutOfMemoryError: Java heap space

  • Error message "Error when scheduling the query(JOB_CLOSE)".

    Hi all,
    While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
    Could you please find what this error is?
    Thanks,
    Uday.

    Hi Uday,
    This problem can occur if you changed the query definition.
    In this case the query definition would be inconsistent with the existing extract structure.
    Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
    to delete.
    After this you could use the same table name for any further extract that you need to create.
    One caution is that the extract table should not be deleted through any other transaction before you run the report.
    Rgds,
    Colum

  • How can i know which index will be used when executing the query ?

    1 ) I have query in which i have 3-4 tables but there multiple index on one column .
    so how can i know which index will be used when executing the query ?
    2) I have a query which ia taking too much time . how can i know which table is taking too much time ?
    3) Please Provide me some document of EXplain plan ?

    Hi Jimmy,
    Consider the below example
    /* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
    CREATE TABLE FIRST AS
    SELECT * FROM all_objects;
    UPDATE FIRST
    SET object_name = 'TEST'
    WHERE owner != 'SCOTT';
    CREATE INDEX idx_first ON FIRST(object_name);
    SELECT *
    FROM FIRST
    WHERE object_name = 'TEST';
    It has not used index
    Execution Plan
    Plan hash value: 2265626682
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 58678 | 7334K| 163 (4)| 00:00:02 |
    |* 1 | TABLE ACCESS FULL| FIRST | 58678 | 7334K| 163 (4)| 00:00:02 |
    /* Formatted on 2011/02/04 21:59 (Formatter Plus v4.8.8) */
    SELECT *
    FROM FIRST
    WHERE object_name = 'emp';
    This has used the index
    Execution Plan
    Plan hash value: 1184810458
    | Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
    | 0 | SELECT STATEMENT | | 1 | 128 | 1 (0)| 00:00:01 |
    | 1 | TABLE ACCESS BY INDEX ROWID| FIRST | 1 | 128 | 1 (0)| 00:00:01 |
    |* 2 | INDEX RANGE SCAN | IDX_FIRST | 1 | | 1 (0)| 00:00:01 |
    From this we can come to the conclusion that, whether to use one index or not by oracle
    would also depend on the data which is present in the table. This has to be this way as
    we see in the bind peeking, if oracle sticks to only one plan, say only use the full table
    scan, it would be a performance hit when it searches for the second query ie where object_name
    ='emp';
    2.
    If we have a query like below.
    select * from emp
    where upper(ename) = upper(:p_ename);
    Evenif we have the index on ename column, oracle wouldn't be able to use the index, as there is a function in the predicate column. If you need oracle to use the index, we need to create a function based index as below.
    Create index idx_ename on emp(upper(ename));
    Regards,
    Cool

  • Incorrec entries when execute the query

    hi,
       I am facing one problem when execute the query on inventory cube(non cumulative cube).Query is diplaying entries for valuated stock Qty.on particular date, but those entries are not exist in BIW(Infocube ,ODS) or R/3 System.
    I checked cache parameters. all settings are correct.
    if anyone has the idea on this  pls. do the needful
    Thanks n Regards,
    HReddy.M
    I

    hello,
          Try to drill down the report based on request ID and find out one record which has this inconsistancy...! then see the data in the CUBE based on that Req ID and PSA..! may be this way will help u out..!
           Check FS10N/MB5B/MB5L Tcodes in R/3 for reconcilation!
                 -EnjoySAP

  • Error when executing a Query through information Broadcasting

    Dear SDN,
    We have configured information Broadcasting in the Web Reports---
    Scheduled and then when executing the following error is coming
    500 internal server error - Microsoft internet explorer
    Error when processing your request
    What has happened?
    The URL http://xyz.com:8000/sap/bw/BEx was not called due to an error.
    Note
    The following error text was processed in the system BWD : Please enter a valid value for characteristic 0CALMONTH.
    The error occurred on the application server asalbwd_BWD_00 and in the work process 0 .
    The termination type was: ERROR_MESSAGE_STATE
    The ABAP call stack was:
    START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BWD in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asalbwd_BWD_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server asalbwd_BWD_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http-c:900-u:VENKAT -l:E-s:BWD-i:asalbwd_BWD_00 -w:0-d:20080708-t:133744-v: ERROR_MESSAGE_STATE-e:Please enter a valid value for characteristic 0CALMONTH.
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Please suggest us to resolve this error..
    Help will be greatly appreciated with points..
    Thanks in advance

    Hi
    Thanks...
    I have given only Fiscal Year/Period Variable
    Other than Fiscal Year/Period Variable....No Variables in that Query..
    In FI Queries, I did not use 0CALMONTH Variable...
    I do not know why it is giving that error..
    Please suggest us to resolve this error..
    Thanks in advance

  • 0ADHOC error while executing the query from Report Designer

    Hi All,
    When I am executing The Query from Report Designer,  am getting the below error.
    Please help me in this regard.
    The initial exception that caused the request to fail was:
    The Web template "0ADHOC" does not exist in the master system
    com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
    at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
    at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
    at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
    at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
    Thanks,
    KVR

    Hi,
    The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
    Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
    Best regards,
    Janine

  • Error in executing the query

    Hi Gurus,
    We have  5 queries on a multiprovider which is built on two cubes,one query is not getting executed and all other queries are working fine, we are restricting the query for one cube which has only 32 records, all these queries are  working fine in dev sys and in the quality we got this error for one query .
    Can any one give some solution for resolving it
    regards
    Tilak

    But what error is it giving when you execute the query?

  • ORA-29902 Error when executing context query

    We sometimes get the following error when executing a search based on keywords entered by a user:
    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Error generating context stmt ORA-29902: error in executing ODCIIndexStart() routine ORA-20000: interMedia Text error: DRG-50901: text query <HR></BLOCKQUOTE>
    A demonstration of the error can be seen by going to the main
    http://technet.oracle.com technet page and then performing a site search. Type in any of the following search phrases:
    Oracle and not Microsoft
    not Microsoft
    and database
    In my brief experimentation, the presence of any of
    not, and, or
    at the beginning of the keywords, or next to each other 'and not' within the keywords set causes the above oracle error.
    OK, I could train the users not to do this, but with the potential for every net user on the planet using my site, it might take me some time to speak to all of them.
    So how do I stop Intermedia from throwing up the error? I have written a quick parser to try to strip out offending entries, but that is not, imho, a good solution, as I do not know all the rules that will break it.
    tia

    You need to write a text query parser. Check the Query Translator code samples from http://technet.oracle.com/sample_code/products/text/content.html

  • Error while executing the query in RSRT

    Hi to all,
    I am executing the query in client development system in RSRT.
    Error coming (Query could not open Genun  id is invalid)
    I shall be thankfull to you for this.
    Regards
    Pavneet Rana

    Hi,
    Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
    if not check ur authorisation.
    Regards....KP

  • Error while executing the query-VIMP

    Dear alll
    I am executing the query in production i am getting this below error message
    BRAIN 629 Specify a value for variable companycode(single values,entry,mandatory)
    BRAIN  629 specify a values for variables Simulkation ID1Individal values,requireed entry)
    RSBOL 000 Program error in class SAPMSSY1 Method UNCAUGHT_EXCEPTION
    BRAIN 633 varibale contain invalid values
    It have been worked untill yesterday
    Please suggest me in futhuru its very very imp to deliver the reports

    Hi,
    Try one of these
    1. Take of the infoobject from the query definition and see if the query is working.
    2. Try saving this Query as another one and try executing it.
    REgards
    Govind

  • Error while executing the query

    Hi all,
    I am facing two errors while executing my query namely
    1)The validity interval has initial value as lower limit.
    2)Diagnosis
    Query  uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
    System Response
    Query  cannot be executed in this way.
    Please suggest a possible reason for these errors.
    Thanks and Regards.
    Mudit Khanna

    Hi,
    See
    Refer Notes 496638,571364
    210432
    528202
    1318741
    208546
    and also see simila thread
    Problem getting data from BF cube in report (Non cummulative keyfigures)
    Thanks
    Reddy

  • Error when save the query

    Hi All,
    We have migrated from 3.x to 7.0 (QA). In BEx analyzer when we save the new query the following error message getting.
    1. Program GP77SAI0MJZN9QMLKWR6SIGCYYA does not exist
    2.  An exception with the type CX_SY_PROGRAM_NOT_FOUND occurred, but was neither handled locally, nor declared in a RAISING clause
    3. Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
    Please help me from this error.
    Thanks in Advance
    Ravi

    Hi,
    Check following thread and underlying note..
    error when saving a query "CX_SY_PROGRAM_NOT_FOUND"
    Abhijeet
    Reward pts if useful..

  • Difference between DB time OLAP time frontend time when execute the query

    hi all,
    can you any one explain the difference between DB time, OLAP time, frontend time when execute the query

    Each BEx quey form a SQL query which is called query execution plan.
    So,
    DB Time is the time taken to read the record from data base by the SQL statement.
    OLAP time is the time taken to process the calculations/formula involved.
    Frontend Time is the time taken to present the output. For ex: while displaying the data in Bex analyser if your query involves a hierarchy, then the presentation time will be more. It also includes the time user taken to enter the query selection input.

Maybe you are looking for

  • XML Bursting shows incorrect values in email

    We used bursting for sending out AR statements. We want to email the statements and ftp the same to another server for backup copies. When I have my delivery as just email, everything works as expected. When I add 'ftp' delivery in addition to 'email

  • File-Sender: Probl. with Content conversion - Read whole line in singleTag

    Hello, I have a flat file that i read with the sender file adapter. After content conversion I get not the result i wished to have... The source flat file looks for example like this: ABC;DEF;GHIJ KLM;NOP;Q RSTU;VW After the Content Conversion I woul

  • Table for BAtches With ref to Last GI date --URGENT ****

    Hello Experts, I'm working on a query, SQ01 for Credit dept.  I'm trying to capture the data that the user wants, which includes last goods issue date.  I've joined MBEW with MAKT, but the user also wants batch number which comes from MSEG and last g

  • LTA Exemptions in Infotype 582

    Hi All, The LTA amount which need to be exempted is entered in Infotype 582 - LTA subtype. This is not taken for Income Tax taxable amount. I need some help is understanding the technical internals like - what could make this LTA exemption component

  • Pricing data not geting picked in business orders

    Hi All, I am facing an absurd issue related to pricing. I have maintained all settings for orders, pricing, sales area, item categories etc. Yet when i try to create an order and enter the product, the pricing does not get picked? I tried alot but do