Error when export to .psd file?
AI said "Not enough memory to save the file." when I export a general file to .psd fomat.
I have 8GB physical memory & use i3 cpu, so I doubted that and start task manager to check and export again.
almost these numbers:
Physical Memory(MB)
Total 8109
Cached 1890
Available 56**
Free 39**
Kernel Memory(MB)
Paged 205
Nonpaged 55
I don't have a clue what's wrong there
i set them in this way
Primary: start up
Secondary: C:\
It desn't work. There is >50GB free space in my C disk.
I think the software used scratch disk in case the physical memory ran out.
And only a quater of memory was in used in my pc. so I don't see how this can solve the problem.
thank you all the same.
Similar Messages
-
Error when exporting to flat file in ODI 11g
This works ok in ODI 10g. I'm using IKM SQL to File Append on Windows Server 2008 R2
Getting the following error when exporting to a flat file in ODI 11g: ODI-40406: Bytes are too big for array
I've seen a couple of threads like this on the forum, but I've never seen an answer to the problem.Problem is with the difference in behaviour for the IKM SQL to File Append KM between 10g and 11g.
Our 10g target file datastore had a mixture of fixed string and numeric columns. Mapping from the source to target was simple one to one column mapping. It generated the desired fixed format flat file; numerics were right adjusted with embedded decimal point and leading spaces. Each numeric column in the generated flat file occupied the exact space allocated to it in the layout. This gave the desired results, even though documentation for the 10g IKM states that all columns in the target must be string.
When we converted to 11g and tried to run this interface, it generated an error on the "numeric" columns because it was wrapping them in quotation marks. The result column was being treated as string, and it was larger than the defined target once it acquired those quotation marks.
In order to get 11g to work, I had to change all the numeric columns in the target data store to fixedstring 30. I then had to change the mapping for these numeric columns to convert them to right adjusted character strings (i.e. RIGHT(SPACE(30) + RTRIM(MyNumericColumn),30).
Now it works. -
Fatal error when importing Photoshop PSD files in Captivate 5.5 MAC
Hello,
I'm running Captivate 5.5 Trial on MAC OS X Snow Leopard. All of a sudden one of my PSD files started causing a fatal error when I try to import it into Captivate.
I tried resaving both captivate and PSD file, saving them under different names, restarting, etc.
What I get is "Fatal error occured, ... Restart Adobe Captivate..."
I've tried removing Preferences folder as well as clearing the cache.
Any help would be greatly appreciated...
ThanksYou can only open Cp 5.5 files with Cp 5.5.
There is no solution for opening these files in Cp 5 version.
May I ask, why did you not get a license of Cp 5.5? It's been around for over 6 months now. -
Data modeler, error when exporting to csv files
hi, i have a relational model and i need to export this model to csv files, when exporting the model it errors,
displaying the following error nmessage:
Oracle SQL Developer Data Modeler Version: 2.0.0 Build: 584
Oracle SQL Developer Data Modeler Export Log
Date and Time: 2010-09-21 15:17:17
Design Name: Diagram
Model Name: CSV
Export Finished
Errors: 1
Warnings:0
<<<<< ERRORS >>>>>
java.lang.NullPointerException
the issue is a file is missing when exporting proccess is done, the file is DM_CommentsRDBMS.csv, this file contains the commens of columns.
Thanks.Hi,
I logged bug however information is not enough to locate the problem.
You can use export to reporting schema in order to get your model exported - in database in that case.
We are not going to extend "export to CSV file" functionality any further - it'll be as it is now.
Philip -
UPK 361 - Error when exporting to .odarc file
In order to generate a new backup of my complete training material, I select Tools->Export->Documents->Export my selection and related documents and a FilenName is given,
as I normally do. During the last 2 days, as soon as this process starts a small window is displayed showing the progress, as soon as 50% is reached the window dissapears and no message is displayed.
Do you have any clue regarding this problem? Is there any activity log I can see?
Thank you in advanced! //
Rubén
Note: I treid already to optimize the RAM memory but it did´nt work at all.Was the odarc file created in the location you defined? This actually sounds like a successful export (there is no 'export successful' message at the end of this process) just that the progress bar doesn't necessarily move smoothly from 0 to 100%. You can also look for the Export Activity Log.xml file (by default in the \My Documents\User Produtivity Kit\Logs folder). Look for anything in a <Message> tag other than "Export successful."
-
'file could not be written due to an error' when exporting jpg
I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
PMylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul -
Error when exporting file from LR5.2 - file created
After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.
The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0 -
In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.
I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu. -
I am using CS6. When exporting layers to files in Scripts, I get an error message Error 519: Server Interface error. 'No component returned from CreateWidget'
Hi. You’ve posted your question in a forum that is for beginners trying to learn the basics of Photoshop. I'm moving your question to the Photoshop General Discussion forum for specialized attention to your situation.
-
Simple test
<languageVersion : 1.0;>
kernel untitled
< namespace : "Your Namespace";
vendor : "Your Vendor";
version : 1;
>
input image4 src;
output pixel4 dst;
void
evaluatePixel()
dst = float4(sampleNearest(src, outCoord()));
The above code will produce a "error saving Pixel Bender Byte Code file" error when exporting for flash player in Pixel Bender Toolkit 2.5.449694.
"dst = (sampleNearest(src, outCoord()));" works fine. And anything like "float4 a= float4(b);" will give same error.Thank you for the error report. I'll put it into our bug database. We're bottling things up for the current version. Gven the workaround, it is unlikely we'll be addressing this bug soon. Please accept my apologies for the annoyance this will cause.
In your second example, float4 a = float4(b), does it return an error if b is only a float4 or regardless of what b is? If b is a scalar float, for example, is the conversion performed correctly? If so, this could be an error that only crops up when using constructor/conversion syntax when the thing being converted is already the correct type.
Thanks,
Chuck. -
Error when exporting reports using MAPI
We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
<br>
<br>
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
<br>
<br>
<br>
1) Procmon.exe output when exporting works fine
<br>
<br>
<br>HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
<br>7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>
<br>
<br>//////////////////////////////////////////////////////////////////////
<br>2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
<br>
<br>
<br>HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
<br>HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
<br>C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
<br>C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
<br>C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
<br>C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Windows\system\MSO.dll FAST IO DISALLOWED
<br>C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
<br>C:\Windows\MSO.dll FAST IO DISALLOWED
<br>C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/aI tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
Type objClassType = Type.GetTypeFromProgID("ebms.main");
object objMain = Activator.CreateInstance(objClassType);
try
object[] p = new object[4];
p[0] = "C:\\ebms\\co1";
p[1] = "C:\\ebms\\co1";
p[2] = "Administrator";
p[3] = "";
objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
catch (Exception ex)
this.RPTDoc = new ReportDocument();
this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
ExportOptions exportOpts = new ExportOptions();
pdfOpts.UsePageRange = false;
exportOpts.ExportFormatOptions = pdfOpts;
mailOpts.MailMessage = "something";
mailOpts.MailSubject = "something";
mailOpts.MailToList = "emailaddress";
exportOpts.ExportDestinationOptions = mailOpts;
exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
try
this.RPTDoc.Export(exportOpts);
catch (Exception ex)
MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error); -
Errors when writing metadata to files on Windows Server
Good day!
I have an iMac running OSX 10.9 (Maverick) and Lightroom 5.2.
My catalog is on the local iMac drive, and the images are on SMB shared drive (handled by Windows 2012 server).
I decided to do the final layout of my album using InDesign, and for that I needed to access to images using Bridge. So selected all the images (the rated once...) and issue a Metadata/Save command.
The system came back with errors on many of the files (such as Photos are read only, and unknown errors).
Retrying to save the metadata on image that was flagged with an error usually (but not always) worked.
I tried to select save the metadata for few (6) images in a time, many times it was ok, but sometimes, one or two of them failed (and retrying again usually solved the problem).
It looks to me like a timing related issue.
Any ideas?
(After spending about an hour on this, I have exported the images to my local drive...). In general I don't have similar problems with other apps.
Any ideas?
YuvalI Yuval
I'm experiencing more or less the same behavior (see Read-only error when writing metadata to file over network (Synology DS1315+ using AFP) ). For me however, the problem is more pronounced if I use the AFP protocol and is better (I think as you described) if I use SMB (all done on a Synology DS1315+). With SMB it most often works but in very rare cases I also get the "read only" message!
Do you have solution to this? Or are you stuck as I am?
Cheers, Chris -
SSRS XML Errors when exporting to .xlsx from Dynamics NAV Database
We use Dynamics NAV for our ERP and have many SSRS reports. We get xml Errors when exporting to Excel .xlsx. I've seen this happen since SQL 2008 R2 and have posted in many places trying to find an answer, but was hoping MS would solve the
issue. The numeric data types in the Dynamics NAV database are all decimal(38,20) and when the value is zero the Excel renderer throws the errors.
We now have over 400 reports and we export them to Excel 2003 format. I'm starting to feel like this is my new Y2K issue when Excel 2003 is set to sunset. I'm fearing that I'll have to do conversions on all numeric data types for all reports.
Both of these are Microsoft products so I'm wondering is this even on their radar.
We're running SQL Server 2012 SP2, and just rolled out CRM 2015 on SQL Server 2014. I get the errors in SSRS 2008R2, 2012, and 2014. Has anyone seen this before?
Timothy KruseHi Skywalker73,
According to your description, when you export the report to Excel, the error “Excel was able to open the file by repairing or removing the unreadable content.” throws out when opening the Excel file.
Based on my research, it has reported the same issue when exporting to Excel. The issue could cause by numeric columns has a precision of 16 or higher. To fix the issue, we could change data type in the table to a support lower precision, or convert
the numbers in the stored procedure that populates the report. For more information, please refer to this article:
SSRS 2012 Bug – “Excel found unreadable content”. Besides, please refer to this
article to check if non-printing characters exist in the report.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support -
I get an error when exporting imovie
I get an error when exporting a project from iMovie, Error: "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. File already open with write permission". How do I fix this?
Hello !
Could you please be more elaborative for explaining your issue? -
Unknown error when exporting 32-bit 5.1 wav audio
I get the ever useful "Unknown error" when exporting the audio from Premiere Pro CS6 to a 32-bit, 5.1 channel uncompressed WAV file most of the time. I was able to get it to work just fine by pasting the audio to a new project, but that isn't working anymore. I get the same error when I change it to 24-bit audio. However, when I change to 16-bit sound it works fine.
First, is there a real audible difference between 16- and 32-bit when it's all going through a WAV to AC3 converter? The AC3 files get dumped into Encore as the audio track so that I can get 5.1 sound on blu-rays instead of Encore re-encoding things.
Second, what would cause it suddenly not work, and how can I get it working again?That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".
Maybe you are looking for
-
How do I use storage on icloud to increase space on my phone
How do I use the storage space I purchased to increase space on my 4s phone
-
Do I need to buy an ethernet adapter or can I use one of my existing AEXPs?
My situation: Just ordered a MacPro which will be delivered Monday. In the mean time I need to find a WiFi solution. The Airport cards for this model are not available yet, and I need Internet access now. Obvious solution is an ethernet adapter. My w
-
Please some one can explain about some complex queries
BW Guru's, please some one can explain about some complex queries which was created while working on Reporting. I need to create profit and loss query as per requirment on the FL-Gl cube. Answer would be appreciate in advance. Regards Krish
-
How to increase limit of users using portal/SSO
Hello, I am expending number of users using a portal forms application and recently started to get this error Service Temporarily Unavailable The server is temporarily unable to service your request due to maintenance downtime or capacity problems. P
-
Converting from Windows XP to Mavericks
HI, GUYS, maybe i can answer you all... i own a toshiba windows xp home edition... when i bought it it was a service pack 2... in a second time i upgraded it in service pack 3... now the morherboard got unworking, and my pc is too old to get repaired