Error when extracting data from R/3 into BW
Hi,
There is an infoobject Payscale Level(Datsource 0paysclaelv_attr) in BW module HR that is extracting data from R/3. While extracting data, the following error occurs "Assignment to feature PFREQ did not take place". I debugged the standard function module HR_BW_EXTRACT_IO_PAYSCALELV and I believe there is definitely an error in the data. But Im not able to find out that record. Has anyone come across this error before? Please let me know if theres any solution to this error. The help for this error provides the following details. But I havent understood it. Any help would be greatly appreciated.
You can assign a specific operation (assignment) to each decision option
within a feature. You can also define decision option ** whose
assignment is effected for all unlisted decision options (this is known
as a default value).
Example:
o D PERSK
o K1 &ABRKS=D1, <- D1 for employee subgroup K1
o K2 &ABRKS=D1, <- D1 for employee subgroup K2
o K3 &ABRKS=D2, <- D2 for employee subgroup K3
o ** &ABRKS=D0, <- D0 for all other employee subgroups
If you now create employee subgroup K4 and the default entry ** is
missing, the system is unable to find a decision option for payroll area
ABKRS.
Procedure
Define a decision option for K4 or for default value **.
Hi ,
The error is due to the existing customizing of feature PFREQ for MOLGA = 05, there the value to be returned depends on the WERKS, but apparently it was forgotten to add a new line for the "Otherwise" case.
Like it was already done for the case of MOLGA = 03, for example. Please add then a line for MOLGA = 05 and "Otherwise" and the issue should be solved.
If this doesnot solves your issue , then kindly check these OSS notes :
1033423 -> 0PAYSCALELV_ATTR: Short dump feature_error
842212 -> 0PAYSCALELV_ATTR: DataSources deliver wrong results
92055 -> RP_FROM_PERIOD_TO_PERIOD: FEATURE_ERROR dump
Regards,
Lokesh
Similar Messages
-
Error when extracting data from ETL - Missing messages and missing InfoIdoc
Hi All,
We are using BW 3.0 and extracting data from other source systems through Informatica Powercenter (ETL). The system is working fine but when we try to extract data on 31st Dec , we get the following error. Only this load gives the error and all the other load to other data targets are going fine. All the data are one-to-one mapped from ETL to BW.
Error messages from Monitor -Status tab:-
"InfoIdocs missing; external system
Diagnosis :- InfoIDocs are missing. The IDocs are created in BW with non-SAP systems as source
systems that transfer the data and metadata to BW using BAPIs. Since the IDocs are missing, a
short dump in BW probably occurred.
System response: No selection information arrived from the source system"
Error messages from Monitor -Details tab:-
Missing message: Number of sent records, Missing message: Selection completed
Highly appretiate your suggestions.
Vinod.CHHi Rathy Moorthy,
Thank you very much for your reply. The source system connections are OK and we are able to load data to other Data targets from ETL, we have issue only with this this particular load. The load extracts data and I have loaded the data from ETL to PSA and have checked the data content and it is correct. But when I update the same data to the target I get this error. I have also tried to update from PSA to target and also directly from ETL to target.
Appretiate your suggestions. -
Error when extracting data from Data Source
Hi All,
I have a Generic datasource in BW which is based on a Function Module.When I am extracting the data from this source in RSA3 it is ending up in Run time error.
the error message is
The current ABAP program "SAPLYBWPU" had to be terminated because one of the
statements could not be executed.
and the error analysis is
You wanted to add an entry to table "\FUNCTION-POOL=YBWPU\DATA=GT_HIERTAB2", which you declared with a UNIQUE KEY. However, there was already an entry with the same key.
This may have been in an INSERT or MOVE statement, or within a
SELECT ... INTO statement.
In particular, you cannot insert more than one initial line into a
table with a unique key using the INSERT INITIAL LINE... statement.
Can anybody explain me how can I resolve this
Thanks
SreejaHello
You can refer following link.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33&overridelayout=true -
Error when extracting data from Hyperion enterprise 6.3.1
I extracted data and at the end it's returning me an error for 2 entities. The problem it's extarcting data from an entity that doesn't exist. Any idea why?
There is no journal posted to it.
This is from the error log.
!\\tdwm-aawhy-cp01\entdata\FSS\IFRS_YE_Rollover_R1\Extract Data AL_IFRS ACTMAVG.txt
ACTMAVG
1
12
D0786.ADJML,N250099.CDN.RCDN,1806525.000000,1755614.000000,1768445.000000,1780035.000000,,,,,,,,
D0786.ADJML,N257099.CDN.RCDN,-16904.000000,-15093.000000,-15093.000000,-15093.000000,,,,,,,,
D0786.ADJML,N607599.CDN.RCDN,17694.000000,17191.000000,17335.000000,17392.000000,,,,,,,,
D0786.ADJML,P200099.CDN.RCDN,2644.000000,2500.000000,2514.000000,2529.000000,,,,,,,,
D0786.ADJML,P200099.CDN.ROTH,4694.000000,4694.000000,4694.000000,4694.000000,,,,,,,,
D0786.ADJML,P300599.CDN.RCDN,49977.000000,403.000000,12897.000000,24182.000000,,,,,,,,
D0786.ADJML,P301199.CDN.RCDN,1750000.000000,1750000.000000,1750000.000000,,,,,,,,,
D0786.ADJML,P304099.CDN.RCDN,,115.000000,582.000000,929.000000,,,,,,,,
D0786.ADJML,P301189.CDN.RCDN,,,,1750000.000000,,,,,,,,
D1124.ADJML,N250099.CDN.RCDN,360104.000000,352066.000000,354059.000000,356051.000000,,,,,,,,
D1124.ADJML,P200099.CDN.RCDN,2075.000000,2000.000000,2008.000000,2015.000000,,,,,,,,
D1124.ADJML,P200099.CDN.ROTH,39.000000,-7.000000,-7.000000,-7.000000,,,,,,,,
D1124.ADJML,P203099.CDN.RCDN,0.000000,-1.000000,0.000000,0.000000,,,,,,,,
D1124.ADJML,P300599.CDN.RCDN,7990.000000,66.000000,2047.000000,4028.000000,,,,,,,,
D1124.ADJML,P301199.CDN.RCDN,350000.000000,350000.000000,350000.000000,,,,,,,,,
D1124.ADJML,P304099.CDN.RCDN,,8.000000,11.000000,15.000000,,,,,,,,
D1124.ADJML,P301189.CDN.RCDN,,,,350000.000000,,,,,,,,
!\\tdwm-aawhy-cp01\entdata\FSS\IFRS_YE_Rollover_R1\Extract Data AL_IFRS ACTMENT.txt
ACTMEND
1
12
D0786.ADJML,N250099.CDN.RCDN,1806525.000000,1755614.000000,1768445.000000,1780035.000000,,,,,,,,
D0786.ADJML,N257099.CDN.RCDN,-16904.000000,-15093.000000,-15093.000000,-15093.000000,,,,,,,,
D0786.ADJML,N607599.CDN.RCDN,17694.000000,17191.000000,17335.000000,17392.000000,,,,,,,,
D0786.ADJML,P200099.CDN.RCDN,2644.000000,2500.000000,2514.000000,2529.000000,,,,,,,,
D0786.ADJML,P200099.CDN.ROTH,4694.000000,4694.000000,4694.000000,4694.000000,,,,,,,,
D0786.ADJML,P300599.CDN.RCDN,49977.000000,403.000000,12897.000000,24182.000000,,,,,,,,
D0786.ADJML,P301199.CDN.RCDN,1750000.000000,1750000.000000,1750000.000000,,,,,,,,,
D0786.ADJML,P304099.CDN.RCDN,,115.000000,582.000000,929.000000,,,,,,,,
D0786.ADJML,P301189.CDN.RCDN,,,,1750000.000000,,,,,,,,
D1124.ADJML,N250099.CDN.RCDN,360104.000000,352066.000000,354059.000000,356051.000000,,,,,,,,
D1124.ADJML,P200099.CDN.RCDN,2075.000000,2000.000000,2008.000000,2015.000000,,,,,,,,
D1124.ADJML,P200099.CDN.ROTH,39.000000,-7.000000,-7.000000,-7.000000,,,,,,,,
D1124.ADJML,P203099.CDN.RCDN,0.000000,-1.000000,0.000000,0.000000,,,,,,,,
D1124.ADJML,P300599.CDN.RCDN,7990.000000,66.000000,2047.000000,4028.000000,,,,,,,,
D1124.ADJML,P301199.CDN.RCDN,350000.000000,350000.000000,350000.000000,,,,,,,,,
D1124.ADJML,P304099.CDN.RCDN,,8.000000,11.000000,15.000000,,,,,,,,
D1124.ADJML,P301189.CDN.RCDN,,,,350000.000000,,,,,,,,If you are sure the entity doesn't exist, trying using the purge entities feature. Go to the Entities module, from its main menu select Task->Unowned Entities and run the Unknown entities report, if the entity that is causing the problem is there, run the purge unowned entities task. Make sure you dont purge other entities that you may need.
-
How to extract data from info cube into an internal table using ABAP code
HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAYHI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY -
Error while extracting data from Generic datasource
Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
SonuHello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu -
Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7
Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./ -
Error While extracting data from FIAA and FIAP
Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
PrasadHello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael -
Time Stamp Error while extracting data from R/3
Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba RaoHi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu -
Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!
Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error: CONNE_IMPORT_WRONG_COMP_TYPE
Exception: CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure "MCEX_BW_LO_API" "(FUNCTION)".
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is: When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it?
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
Jaume Saumell
Message was edited by:
Jaume SaumellHi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P -
Error when reading data from socket
Hi,
I am getting the error 'NiRawReadError: An error occured when reading data from socket.' when using the ABAP API 'mo_core_service->invoke_matching'.
And I get this error only when I pass ABAP_TRUE to the paramter 'iv_wait_for_invocation' .
Can anybody help me in correcting this?Hi Narasa,
The following error is already in discussion in the below forum.Plz consult the forum link you will find the error solution.
Problem in ABAP API - NiRawReadError: error when reading data from socket
Rgds
Ankit -
Unable to extract data from R/3 into BW 3.5
I have just started learning BW. I am currently trying to upload data from R/3 into BW. I have tried uploading data into InfoCube , ODS, InfoObjects from R/3 and in all cases I am getting error messages. Please shed some light as the what am doing wrong......below are the steps that I have done
For loading transaction data from R/3 in ODS
1. Created view from VBAP and VBAK tables in R/3
2. Created Transaction type DataSource in R/3 using RSO2 transaction
3. Replicated above DataSource in BW under Source Systems. using 'Replicate DataSource'
4. Created ODS object along the same lines as the above created view in R/3
5.Created InfoSource and assigned the replicated DataSource
6. Activated the Transfer Rules, Transfer Structure, Communivcation Structure
7. Created Update Rules for ODS and activated them
8. Created InfoPackage and started the Data Request
The error message that I see in Monitor is as below
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : IDoc with errors added
Processing (data packet): No data
I am getting the same error message when I try InfoCube instead of ODS.
Please let me know what is wrong
VidyaI checked the 'Details' and 'Status' tab page in Monitor
On Status Page it says
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
On Details Tab page, it says
Requests (messages): Everything OK
Data request arranged
Confirmed with: OK
Extraction (messages): Missing messages
Missing message: Request received
Missing message: Number of sent records
Missing message: Selection completed
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : IDoc with errors added
Processing (data packet): No data -
Extracting data from Essbase & loading into flat file through ODI
Hi,
I want to extract data from Essbase and load it into a flat file through ODI(for extraction from essbase I'm using a report script) and I’m using these KM’s:- LKM Hyperion Essbase data to SQL,IKM SQL to FILE Append & for reversing I’m using RKM Hyperion Essbase.All the mappings have been done and the interface has been made. But when I’m executing the interface it is throwing the error below:-
ODI-1217: Session ESS_FILEI (114001) fails with return code 7000.
ODI-1226: Step ESS_FILEI fails after 1 attempt(s).
ODI-1240: Flow ESS_FILEI fails while performing a Loading operation. This flow loads target table ESS_FILE.
ODI-1228: Task SrcSet0 (Loading) fails on the target FILE connection FILE_PS_ODI.
Caused By: java.sql.SQLException: ODI-40417: An IOException was caught while creating the file saying The system cannot find the path specified
at com.sunopsis.jdbc.driver.file.impl.commands.CommandCreateTable.execute(CommandCreateTable.java:62)
at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
at com.sunopsis.jdbc.driver.file.FilePreparedStatement.execute(FilePreparedStatement.java:178)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:537)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:338)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:263)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:822)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)
Please let me know what I'm missing and how I can resolve this error.
ThanksIt seems that you are trying to use the file as your staging areas. Hyperion LKM extracts essbase data into a DB staging area which can then be used by your file IKM to load it into file.
You need to use a RDBMS for your staging area. -
Problem when extracting data from R/3 to BI
Hi Experts,
I am facing a strange problem. While i am extracting data from R/3 yo BI. One Infopackage is running successfully and i can see the data at Bi side. But while I am running another infopackage for another data source it is taking long time and at last loading results into failure.
I have gone through SDN also but not able to find any inputs.
I think it might be the reason with the Idocs. The error it is giving is
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
All of the packets from the source system arrived
I am not able to see list of Idocs in sm58.
What might be the reoson?
Regards,
sridharHi,
See if its a full schedule it again by deleting any old requests....
And then when going thru job overview>in the sourcesystem>u can execute there itself and chk the status of the job...
If its no there then the job might have missed up due to some unfair reason....it happens sometimes also..some times it will be in scheduled only....once select all active/cancled/finished and so on...
And also chk under details tab...under extraction....whether data selection scheduled and requested and finished....????
If not there try to run it again and at the same moment monitor in source with jobname as BIREQU_* and select all input entries as canceled/active/finished......
rgds, -
Error while extracting data from Generic VBAK Table
Hi,
When i am extracting data from VBAK using generic extraction via tavle, i am, getting the error "Syntax error in program "SAPLXRSA ""
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSAP" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLXRSA " in include "ZXRSAU01
" in
line 159:
"The type of the database table and work area (or internal table) "L_ST"
"R_CE1IDEA" are not Unicode convertible. ."
Please help me out in fixing this,
Thansk,do you have an user-exit? if yes, post the code....
did you try regenerating the entire stuff (ds, structure,...)...there might be a mismatch between the structures of datasource and the generated extraction program....
M.
Maybe you are looking for
-
Hellow everyone, I have just moved from one PC to another. They are windows pc's not macintosh. When i installed itunes on the new computer it stated that I already had 5 devices authrorized for this account. I did a little reading and went in and
-
How to perform Descending Order function on a DATE column in Analytical View
Hi, I have the below requirement For the article/site having a+ stock quantity from table MARD field LABST, check the last goods movement date as a receipt table MSEG field SHKZG value "H". To get this information fetch the data from the table MSEG
-
Homesharing not working I
-
I have lost about half of my hd space. I looked at previous posts and read on http://pondini.org/OSX/DiskSpace.html to check and read to check /Volumes. I did and found an alias for Macintosh HD 1 but also a Macintosh HD folder (which is about the sp
-
Is there a way i can find out what sites were looked at in private browsing
I am just wondering if there is a way i can find out what web pages sites or other searches were looked at while using the private browsing?