Error when extracting data with extractor 2lis_04_matnr - NEED HELP ASAP !!

Hi experts!
Got an error when extracting data with extractor 2lis_04_matnr.
System says (short dump):
DUMP TEXT START----
Runtime error:    CONNE_IMPORT_WRONG_COMP_TYPE
Exception:   CX_SY_IMPORT_MISMATCH_ERROR
Error when attempting to import object "MC04P_0MAT_TAB".
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed. This is probably due to an error in the ABAP program. When attempting to import data, it was discovered that the data type of the stored data was not the same as that specified in the program.
An exception occurred. This exception is dealt with in more detail below. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR', was neither caught nor passed along using a RAISING clause, in the procedure  "MCEX_BW_LO_API" "(FUNCTION)".                                                                             
Since the caller of the procedure could not have expected this exception      
to occur, the running program was terminated.                                
The reason for the exception is:  When importing the object "MC04P_0MAT_TAB", the component no. 5 in the dataset has a different type from the corresponding component of the target object in the program "SAPLMCEX". <b>The data type is "D" in the dataset, but "C" in the program.</b>
DUMP TEXT END----
Please, can someone explain me how to solve it? 
Really need help ASAP!
Thanks in advance,
Jaume
Message was edited by:
        Jaume Saumell
Message was edited by:
        Jaume Saumell

Hi,
Check this note: 328181
So you need to delete entries in SM13/LBWQ for application and also detup table content.
And then refill teh set up table.
If you are in production clear the entries by running collective run no of times for this application 04.
With rgds,
Anil Kumar Sharma .P

Similar Messages

  • Error when extracting data from ETL - Missing messages and missing InfoIdoc

    Hi All,
    We are using BW 3.0 and extracting data from other source systems through Informatica Powercenter (ETL). The system is working fine but when we try to extract data on 31st Dec , we get the following error. Only this load gives the error and all the other load to other data targets are going fine. All the data are one-to-one mapped from ETL to BW.
    Error messages from Monitor -Status tab:-
       "InfoIdocs missing; external system
       Diagnosis :- InfoIDocs are missing. The IDocs are created in BW with non-SAP systems as source    
       systems that transfer the data and metadata to BW using BAPIs. Since the IDocs are missing, a   
       short dump in BW probably occurred.
       System response:  No selection information arrived from the source system"
    Error messages from Monitor -Details tab:-
        Missing message: Number of sent records,   Missing message: Selection completed
    Highly appretiate your suggestions.
    Vinod.CH

    Hi Rathy Moorthy,
    Thank you very much for your reply. The source system connections are OK and we are able to load data to other Data targets from ETL, we have issue only with this this particular load. The load extracts data and I have loaded the data from ETL to PSA and have checked the data content and it is correct. But when I update the same data to the target I get this error. I have also tried to update from PSA to target and also directly from ETL to target.
    Appretiate your suggestions.

  • Error when extracting data from Hyperion enterprise 6.3.1

    I extracted data and at the end it's returning me an error for 2 entities. The problem it's extarcting data from an entity that doesn't exist. Any idea why?
    There is no journal posted to it.
    This is from the error log.
    !\\tdwm-aawhy-cp01\entdata\FSS\IFRS_YE_Rollover_R1\Extract Data AL_IFRS ACTMAVG.txt
    ACTMAVG
    1
    12
    D0786.ADJML,N250099.CDN.RCDN,1806525.000000,1755614.000000,1768445.000000,1780035.000000,,,,,,,,
    D0786.ADJML,N257099.CDN.RCDN,-16904.000000,-15093.000000,-15093.000000,-15093.000000,,,,,,,,
    D0786.ADJML,N607599.CDN.RCDN,17694.000000,17191.000000,17335.000000,17392.000000,,,,,,,,
    D0786.ADJML,P200099.CDN.RCDN,2644.000000,2500.000000,2514.000000,2529.000000,,,,,,,,
    D0786.ADJML,P200099.CDN.ROTH,4694.000000,4694.000000,4694.000000,4694.000000,,,,,,,,
    D0786.ADJML,P300599.CDN.RCDN,49977.000000,403.000000,12897.000000,24182.000000,,,,,,,,
    D0786.ADJML,P301199.CDN.RCDN,1750000.000000,1750000.000000,1750000.000000,,,,,,,,,
    D0786.ADJML,P304099.CDN.RCDN,,115.000000,582.000000,929.000000,,,,,,,,
    D0786.ADJML,P301189.CDN.RCDN,,,,1750000.000000,,,,,,,,
    D1124.ADJML,N250099.CDN.RCDN,360104.000000,352066.000000,354059.000000,356051.000000,,,,,,,,
    D1124.ADJML,P200099.CDN.RCDN,2075.000000,2000.000000,2008.000000,2015.000000,,,,,,,,
    D1124.ADJML,P200099.CDN.ROTH,39.000000,-7.000000,-7.000000,-7.000000,,,,,,,,
    D1124.ADJML,P203099.CDN.RCDN,0.000000,-1.000000,0.000000,0.000000,,,,,,,,
    D1124.ADJML,P300599.CDN.RCDN,7990.000000,66.000000,2047.000000,4028.000000,,,,,,,,
    D1124.ADJML,P301199.CDN.RCDN,350000.000000,350000.000000,350000.000000,,,,,,,,,
    D1124.ADJML,P304099.CDN.RCDN,,8.000000,11.000000,15.000000,,,,,,,,
    D1124.ADJML,P301189.CDN.RCDN,,,,350000.000000,,,,,,,,
    !\\tdwm-aawhy-cp01\entdata\FSS\IFRS_YE_Rollover_R1\Extract Data AL_IFRS ACTMENT.txt
    ACTMEND
    1
    12
    D0786.ADJML,N250099.CDN.RCDN,1806525.000000,1755614.000000,1768445.000000,1780035.000000,,,,,,,,
    D0786.ADJML,N257099.CDN.RCDN,-16904.000000,-15093.000000,-15093.000000,-15093.000000,,,,,,,,
    D0786.ADJML,N607599.CDN.RCDN,17694.000000,17191.000000,17335.000000,17392.000000,,,,,,,,
    D0786.ADJML,P200099.CDN.RCDN,2644.000000,2500.000000,2514.000000,2529.000000,,,,,,,,
    D0786.ADJML,P200099.CDN.ROTH,4694.000000,4694.000000,4694.000000,4694.000000,,,,,,,,
    D0786.ADJML,P300599.CDN.RCDN,49977.000000,403.000000,12897.000000,24182.000000,,,,,,,,
    D0786.ADJML,P301199.CDN.RCDN,1750000.000000,1750000.000000,1750000.000000,,,,,,,,,
    D0786.ADJML,P304099.CDN.RCDN,,115.000000,582.000000,929.000000,,,,,,,,
    D0786.ADJML,P301189.CDN.RCDN,,,,1750000.000000,,,,,,,,
    D1124.ADJML,N250099.CDN.RCDN,360104.000000,352066.000000,354059.000000,356051.000000,,,,,,,,
    D1124.ADJML,P200099.CDN.RCDN,2075.000000,2000.000000,2008.000000,2015.000000,,,,,,,,
    D1124.ADJML,P200099.CDN.ROTH,39.000000,-7.000000,-7.000000,-7.000000,,,,,,,,
    D1124.ADJML,P203099.CDN.RCDN,0.000000,-1.000000,0.000000,0.000000,,,,,,,,
    D1124.ADJML,P300599.CDN.RCDN,7990.000000,66.000000,2047.000000,4028.000000,,,,,,,,
    D1124.ADJML,P301199.CDN.RCDN,350000.000000,350000.000000,350000.000000,,,,,,,,,
    D1124.ADJML,P304099.CDN.RCDN,,8.000000,11.000000,15.000000,,,,,,,,
    D1124.ADJML,P301189.CDN.RCDN,,,,350000.000000,,,,,,,,

    If you are sure the entity doesn't exist, trying using the purge entities feature. Go to the Entities module, from its main menu select Task->Unowned Entities and run the Unknown entities report, if the entity that is causing the problem is there, run the purge unowned entities task. Make sure you dont purge other entities that you may need.

  • Error when extracting data in rsa3

    Hi,
    we are using BI7.0. While when i am extracting data to PSA  i am getting an error that error in source system. when i am extracting data in RSA3 source system side there also it was showing the same error. Data souce is active.
    So please let me know if it as anything to do.
    regards,
    mahesh.

    Hi,
    Which datasource are you using to extract data ? Go rsa5 and try to activate it then retry.
    Regards,
    ®

  • Errors when viewing data with Crystal Report Viewer.

    we receive the following errors when we try to merge a crystal report with data, we are using a crystal  report viewer to display the report.
    Can someone help us with where we might be going wrong?
    Thanks
    Rajesh
    General Information
    Additional Info:
    ExceptionManager.MachineName: CCS104
    ExceptionManager.TimeStamp: 02/10/2008 12:40:31
    ExceptionManager.FullName: Congestion.Framework.ExceptionManagement, Version=33.36.0.0, Culture=neutral, PublicKeyToken=null
    ExceptionManager.AppDomainName: /LM/W3SVC/1/ROOT/BackOfficeTR4-1-128674174088125000
    ExceptionManager.WindowsIdentity: NT AUTHORITY\SYSTEM
    Renewal charges Statement Id : 37171
    Unknown Database Connector Error
    Error in File C:\WINNT\TEMP\{AE9A7C1D-F11A-41CC-B2F7-BC1062DC3A5B}.rpt:
    Unknown Database Connector Error
    Stack Trace :    at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.  (Object 
       at CrystalDecisions.CrystalReports.Engine.ReportDocument.SetDataSource(DataSet dataSet)
       at Congestion.Core.PresentationTier.BackOffice.WF_NewReport_P.DownloadPDFStatement(Int64 lngCanId, Int64 lngFasId, String strChargeType)
       at Congestion.Core.PresentationTier.BackOffice.WF_NewReport_P.Page_Load(Object sender, EventArgs e)
    Source : CrystalDecisions.ReportAppServer.DataSetConversion

    Hi,
    Its a best practice to use the code given below in the unload event of the page or the code can also be written in a button press event so that the disposing is ensured manually(If sessions are in use).
    boReportDocument.Close();
    boReportDocument.Dispose();
    GC.Collect();
    Note: boReportDocument is the object of ReportDocument.
    This code disposes the report object after using it.
    Check the issue with [filemon|http://technet.microsoft.com/en-us/sysinternals/bb896642.aspx] utility.
    Amit

  • Error when extracting data from R/3 into BW

    Hi,
      There is an infoobject Payscale Level(Datsource 0paysclaelv_attr) in BW module HR that is extracting data from R/3. While extracting data, the following error occurs "Assignment to feature PFREQ did not take place". I debugged the standard function module HR_BW_EXTRACT_IO_PAYSCALELV and I believe there is definitely an error in the data. But Im not able to find out that record. Has anyone come across this error before? Please let me know if theres any solution to this error. The help for this error provides the following details.  But I havent understood it. Any help would be greatly appreciated.
    You can assign a specific operation (assignment) to each decision option
    within a feature. You can also define decision option ** whose
    assignment is effected for all unlisted decision options (this is known
    as a default value).
    Example:
    o                D PERSK
    o     K1           &ABRKS=D1,    <- D1 for employee subgroup K1
    o     K2           &ABRKS=D1,    <- D1 for employee subgroup K2
    o     K3           &ABRKS=D2,    <- D2 for employee subgroup K3
    o     **           &ABRKS=D0,    <- D0 for all other employee subgroups
    If you now create employee subgroup K4 and the default entry ** is
    missing, the system is unable to find a decision option for payroll area
    ABKRS.
    Procedure
        Define a decision option for K4 or for default value **.

    Hi ,
    The error is  due to the existing customizing of feature PFREQ for MOLGA = 05, there the value to be returned depends on the WERKS, but apparently it was forgotten to add a new line for the "Otherwise" case.
    Like it was already done for the case of MOLGA = 03, for example. Please add then a line for MOLGA = 05 and "Otherwise" and the issue should be solved.
    If this doesnot solves your issue , then kindly check these OSS notes :
    1033423 -> 0PAYSCALELV_ATTR: Short dump feature_error
    842212   -> 0PAYSCALELV_ATTR: DataSources deliver wrong results
    92055     ->  RP_FROM_PERIOD_TO_PERIOD: FEATURE_ERROR dump
    Regards,
    Lokesh

  • Serious Issue with Linkage..Need help ASAP!

    OK, I have big deadline for Monday and I can't figure this
    out. I have a bunch of movieclips that are set up with linkage for
    actionscript and set to export in first frame. Everything was fine
    and dandy for a week. Now all of a sudden Flash hangs when I try to
    export the swf. If I turn off the export in first frame everything
    is fine. The problem then is that my move clips aren't available
    for the attachmovie call. What I don't understand is why it was
    fine, then all of a sudden this happened for no apparent reason.
    Has anyone got a workaround or solution for this? I need help with
    this ASAP. Thanks.
    --Paul

    Sadly nothing you can do. The file must be corrupted.
    sometimes files that need saving corrupt themselves (product of
    voltage variations or some other physical things) making some
    objects "BAD", maybe you can save your work if you determine what
    is the only object that is corrupting all the file and delete and
    and redraw it.

  • SQL Error when adding data with UDO + Form

    Good morning, friends.
    Initially, I apologize for any mistakes in my English.
    I am developing an addon for a client and now I came across a problem that started happening about 5 days ago:
    I customized a MasterData postcodes in B1, I created a UDO (oCNSTCEP) and bind to a form created by the Screen Painter. It is noteworthy that this program has been operating without any problems in the customer environment for at least 3 months. Finally, for reasons unknown to the system now has to give the following message when I insert a new record:
    [Microsoft] [SQL Server Native Client 10.0] [SQL Server] Conversion failed When converting the nvarchar value 'oCNSTCEP' to data type int. (CINF)
    The strange thing is that the record is written into the UDT corresponding to the UDO. But the error message is given, giving the user the impression that the routine was not completed successfully.
    Yesterday you told me what is happening the same error in another form, ie, the way any given recording through UDOs are giving problem.
    I searched for this post in SDN and the maximum that I discovered is that it could be happening because of the variable @ object_type in SBO_Notification be as int instead of being as nvarchar (20). I checked the stored procedure and @object_type is nvarchar(20) type.
    I would like to help for a solution to this problem. Since now, thank you!
    Sincerely,
    Junior

    The error is coming from the stored procedure and is easy to fix,
    Anywhere where you check the @object_type, you need to put the value in single quotes.
    e.g if your stored proc includes both of these:
    IF @object_type = 17
    IF @object_type = 'oCNSTCEP'
    It will fail with the error you mentioned. But if you have:
    IF @object_type = '17'
    IF @object_type = 'oCNSTCEP'
    It will work.

  • Error when extracting data from Data Source

    Hi All,
    I have a Generic datasource in BW which is based on a Function Module.When I am extracting the data from this source in RSA3 it is ending up in Run time error.
    the error message is
    The current ABAP program "SAPLYBWPU" had to be terminated because one of the
    statements could not be executed.
    and the error analysis is
    You wanted to add an entry to table "\FUNCTION-POOL=YBWPU\DATA=GT_HIERTAB2", which you declared with a UNIQUE KEY. However, there was already an entry with the same key.
    This may have been in an INSERT or MOVE statement, or within a
    SELECT ... INTO statement.
    In particular, you cannot insert more than one initial line into a
    table with a unique key using the INSERT INITIAL LINE... statement.
    Can anybody explain me how can I resolve this
    Thanks
    Sreeja

    Hello
    You can refer following link.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33&overridelayout=true

  • Error when extracting data using DB Connect from an Oracle database

    Hi All,
    We are on BI 3.5 and loading data from a non-SAP (Oracle 10g) database using DB Connect.
    I received the following error messages when trying to perform "Check DataSource" using the DB Connect setup in RSA1.
    Event with errors RSDL_META_UPLOAD in DataSource
    Message no. R8287
    Warning Messages;
    Message no. RSDL053
    Field name ReceiptID contains non-alpha-numeric characters
    Field name ActivityDate contains non-alpha-numeric characters
    Field name ReceiptDate contains non-alpha-numeric characters
    Field name ReceiptLineNumber must have between 000001 and 000016 digits
    etc...
    Views are created under the owner's user name. I have checked with DB personnel and they confirm that all the authorization and security access privileges have been correctly granted to the views.
    We are also able to extract the data by running a sql query statement from the views using SQL Plus
    Currently we also have a similar extraction process set up with an Oracle 9 database, which extracts the information without any issues.
    Thanks,
    Anthony

    Hi Mr Loh.
    I know that this thread has over a year ago but i was looking for something similar for over 2 weeks ago and i ialways found this thread...I want to share my experience even that maybe you already found the same solution or something similar (i saw that you check your own post as answered):
    I made a similar connection from BI 7 SP 18, but in my case was to a Microsoft SQL database 2005. When i "check the datasource" i receive like almost 150 warnings and 1 error and all the warnings and errors are the same ones as you describe above. What i did is create a custom view in the MSSQL database and convert all the column names to uppercase and the column names i limited to 16 characters at most. after doing that all the warnings and the error described disappear and i can view the database content when you made click in the "view content table" button.
    I hope that this will help somebody and best regards
    Martin Olmos

  • Error when synchronising data with Active Directory - URGENT

    Hi,
    We are currently running on ECC 6, and have a CUA implemented. I am attempting to synch my user data on the CUA with the Active Directory, I'm only updating the SAP database and not writing back to AD.
    I have mapped the fields in LDAPMAP, and using the find function through transaction LDAP I'm able to read the data for the relevant fields so the AD user id does have the correct read access to AD
    However when I run the RSLDAPSYNC_USER program, the user is created but only the Surname field is populated. Does someone perhaps now what could cause this problem?
    Thanks in advance
    Sujeet

    I think I know what you're problem may be.. There is a hard limit or 1000 results for a LDAP search against active directory. And I think you're hitting this limit. One way to test is to narrow your search to one small OU with only 10 users in the OU.
    This setting can be changed at the controller and is called "MaxValRange". here's a link to more info <a href="http://support.microsoft.com/kb/315071">http://support.microsoft.com/kb/315071</a>
    Before you make this change on your domain controller I'd try narrowing the search to a single OU first.

  • Issues when opening files with pse9..need help

    i am helping a friend with her images that have been saved on a disc as a .psd file, she would like to use her pse9 to view them but when i go to open the file i get this message in pse9 stating "this document uses unsupported color mode..." and then asks me to convert rgb and then the image looses the color. i have looked online for everything i can think of and still can not find an answer. do i have to open with an older adobe photoshop in which i think that was what it was orginally saved with or am i doing something wrong...these images are very important to her and i dont know much about these programs..please any help or suggestions would be nice..
                                                      Thank you

    midnight24,
    In your initial post you stated that the files are .psd files.
    We learn now that they were created in an alien program. So be it.
    You state that you cannot open them due to ?corruption. Something about a video game, the relevance of which escapes me.
    Suggest that you do the following:
    Download Irfanview at www.irfanview.com. This is a free program which will probably open the files.
    If so, save them via Irfanview, and open the newly saved files in PSE. Do this with a test file to be sure that it works.
    Report back with your progress.

  • Problem with FocusTraversalPolicy.. need help  asap!!!!

    I have Panel with six text fields. I have another subpanel with another three text fields placed on this main panel. I want to create a FocusTraversalPloicy in a way .. that the focus goes to the first field in the subpanel from the third text field of the main panel. And from the last text field of the Subpanel the focus should go to the 4th text field of the Main Panel. Help needed asap.
    TIA,
    BT

    Hi,
    main panel
    - text field 1
    - text field 2
    - text field 3
    - text field 4
    - text field 5
    - text field 6
    - sub panel ( text field 7, text field 8, text field 9 )
    focus seguence:
    text field 1 ->text field 2 ->text field 3 ->
    text field 7 ->text field 8 ->text field 9 ->
    text field 4 ->text field 5 ->text field 6 ...
    //----------------- CODE ----------
    import java.awt.*;
    import javax.swing.*;
    public class TraversalPolicyDemo1 extends JFrame
    JPanel mainPanel = new JPanel();
    JTextField txtField1 = new JTextField();
    JTextField txtField2 = new JTextField();
    JTextField txtField3 = new JTextField();
    JTextField txtField4 = new JTextField();
    JTextField txtField5 = new JTextField();
    JTextField txtField6 = new JTextField();
    JPanel subPanel = new JPanel();
    JTextField txtField7 = new JTextField();
    JTextField txtField8 = new JTextField();
    JTextField txtField9 = new JTextField();
    public TraversalPolicyDemo1()
    this.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    this.mainPanel.setFocusCycleRoot(true);
    this.subPanel.setFocusable(false);
    this.mainPanel.setFocusTraversalPolicy(new MyFocTrPol());
    init();
    private void init()
    JPanel contentPane = (JPanel) this.getContentPane();
    GridLayout gridLayout = new GridLayout();
    gridLayout.setRows(7);
    gridLayout.setColumns(1);
    gridLayout.setHgap(10);
    gridLayout.setVgap(10);
    mainPanel.setLayout(gridLayout);
    txtField1.setText("11111");
    txtField2.setText("22222");
    txtField3.setText("33333");
    txtField4.setText("44444");
    txtField5.setText("55555");
    txtField6.setText("66666");
    txtField7.setText("77777");
    txtField8.setText("88888");
    txtField9.setText("99999");
    this.subPanel.add(txtField7);
    this.subPanel.add(txtField8);
    this.subPanel.add(txtField9);
    mainPanel.add(txtField1, null);
    mainPanel.add(txtField2, null);
    mainPanel.add(txtField3, null);
    mainPanel.add(txtField4, null);
    mainPanel.add(txtField5, null);
    mainPanel.add(txtField6, null);
    mainPanel.add(subPanel, null);
    contentPane.add(mainPanel, null);
    public static void main(String[] args)
    try
    UIManager.setLookAndFeel(UIManager.getSystemLookAndFeelClassName());
    catch(Exception e)
    e.printStackTrace();
    TraversalPolicyDemo1 frame = new TraversalPolicyDemo1();
    frame.pack();
    frame.setVisible(true);
    }// end class TraversalPolicyDemo1
    import javax.swing.*;
    import java.awt.*;
    public class MyFocTrPol extends LayoutFocusTraversalPolicy
    public Component getComponentAfter(Container focusCycleRoot, Component aComponent)
    Component ret=null;
    Component first = focusCycleRoot.getComponent(0);//txtField1
    Component second = focusCycleRoot.getComponent(1);
    Component third = focusCycleRoot.getComponent(2);
    Component fourth = focusCycleRoot.getComponent(3);
    Component fifth = focusCycleRoot.getComponent(4);
    Component sixth = focusCycleRoot.getComponent(5);//txtField6
    Container seventh = (Container)focusCycleRoot.getComponent(6);//sub panel
    Component sub_first = seventh.getComponent(0);//txtField7
    Component sub_second = seventh.getComponent(1);//txtField8
    Component sub_third = seventh.getComponent(2);//txtField9
    if (aComponent.equals(first))
    ret = second;
    else if (aComponent.equals(second))
    ret = third;
    else if (aComponent.equals(third))
    ret = sub_first;
    else if (aComponent.equals(fourth))
    ret = fifth;
    else if (aComponent.equals(fifth))
    ret = sixth;
    else if (aComponent.equals(sixth))
    ret = first;
    else if (aComponent.equals(sub_first))
    ret = sub_second;
    else if (aComponent.equals(sub_second))
    ret = sub_third;
    else if (aComponent.equals(sub_third))
    ret = fourth;
    return ret;
    }// end getComponentAfter
    public Component getComponentBefore(Container focusCycleRoot, Component aComponent)
    Component ret=null;
    Component first = focusCycleRoot.getComponent(0);//txtField1
    Component second = focusCycleRoot.getComponent(1);
    Component third = focusCycleRoot.getComponent(2);
    Component fourth = focusCycleRoot.getComponent(3);
    Component fifth = focusCycleRoot.getComponent(4);
    Component sixth = focusCycleRoot.getComponent(5);//txtField6
    Container seventh = (Container)focusCycleRoot.getComponent(6);//sub panel
    Component sub_first = seventh.getComponent(0);//txtField7
    Component sub_second = seventh.getComponent(1);//txtField8
    Component sub_third = seventh.getComponent(2);//txtField9
    if (aComponent.equals(first))
    ret = sixth;
    else if (aComponent.equals(second))
    ret = first;
    else if (aComponent.equals(third))
    ret = second;
    else if (aComponent.equals(fourth))
    ret = sub_third;
    else if (aComponent.equals(fifth))
    ret = fourth;
    else if (aComponent.equals(sixth))
    ret = fifth;
    else if (aComponent.equals(sub_first))
    ret = third;
    else if (aComponent.equals(sub_second))
    ret = sub_first;
    else if (aComponent.equals(sub_third))
    ret = sub_second;
    return ret;
    }// end getComponentBefore
    public Component getDefaultComponent(Container focusCycleRoot)
    return focusCycleRoot.getComponent(0);//txtField1
    public Component getFirstComponent(Container focusCycleRoot)
    return focusCycleRoot.getComponent(0);//txtField1
    public Component getLastComponent(Container focusCycleRoot)
    return focusCycleRoot.getComponent(5);//txtField6
    public Component getInitialComponent(Window window)
    Component def = getDefaultComponent(window);
    if (def == null && window.isFocusableWindow())
    def = window;
    return def;
    }// end class MyFocTrPol

  • Technical Error When Extracting Time Data

    Hi SAP Experts,
    I would like to seek your assistance on this case.
    When business warehouse extracts HR data from SAP, they received this error message stating "Technical error when extracting time data in HR: HRMS_TIME_TIM_QUOTA 00321478".
    Do you have any idea on this?
    Thanks.

    We don't have Business Warehouse, but it seems your system has problems with a Quota, perhaps for employee # 00321478.

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

Maybe you are looking for


HashFlare