Error when extracting the text data

Hi all
I am getting an error when transfering the text data thru flat files .
It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
pls suggest me.
thanks in advance
karna

hi,
     you have to decline 0LANGU, STTXT(short text), MDTXT(medium text),
LGTXT(long text), and respective key field(primary key) of attribute for
text data source.  give the above five info object's in transfer structure for
text data source and activate it.
if helpful provide points
regards
harikrishna.N

Similar Messages

  • Error when tranfering the text data

    Hi all
    I am getting an error when transfering the text data thru flat files .
    It is asking " No transfer structure available for the source system ," and saying that 0langu is not assigned to source syatem.I am working on 3.5.
    pls suggest me.
    thanks in advance
    karna

    here are teh steps:
    1) craete source system in BW as say Flat_file
    2) go to inforsource --?  create inforsource --> right clik on infosource and say assign datasource
    3) select flat_file here and say YES
    4) then for flat file, trnafer structure mapping has to be done manually. so in trs struc screen ,go to datasource tab and enter your corresponding infoobject.
    5) then  go to tranfer rule tab and propose the rule.
    If it helps, please assign points. In case of doubt, please get back
    Regards
    Pankaj

  • Error 4 when updating the text data

    When i am trying to load the data  using IP i am facing the issue Error 4 when updating the text data.Please suggest me
    Edited by: srikanth reddy612 on Dec 15, 2011 12:45 PM

    hi srikanth,
    you might have selected given lowercase data
    and please check in the Infoobject the lowercase Checkbox is unchecked then it will allow you to update from IP.
    also check in the Datasource fields tab whether particular field is unchecked with lowercase.
    if checked all records you are pushing will have to be in uppercase.
    thanks
    Sankaresh S

  • Error when reading the access data(URL,user, password) for Adapter Engine

    Hi,
    We are getting this error in production system 
    "SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
    Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
    Its urgent.  We are in support project.
    regards,
    john

    Hi jhon,
              please check the following threads to resolve the problem.
    AE_DETAILS_GET_ERROR
    Error : no_adapter_engine_found: Unable to find Adapter Engine
    regards
    mahesh.

  • Error when activating the master data

    Hi
    I am getting the following error when activating the master data. when using IDOC as transfer method in transfer rules
    <b>Error while creating table 'EDISEGMENT' entry '/BIC/CIRB0CLASS_NUM_TEXT'</b>
    If anyone came across this kind of problem plz share the solution.
    Regards
    Annie

    Hi
    I solved the problem. AFter changing from PSA to IDOC, i just saved first and activated. it got activated. But thanks for the response.
    There are no short dumps in ST22
    Regards
    Annie

  • Error when reading the access data for the Adapter Engine

    We are getting the following error in XI. It started on Jan 22 and resolved on Jan 23 automatically. Nothing has been changed and we don't able to understand how problem started and how it resolved:
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.xpd.dbcixpd</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.xpd.dbcixpd</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.xpd.dbcixpd</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Pls suggest if anyone has gone thru same problem.
    Regards
    Amar

    I got the same problem while using RFC lookup.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
      <SAP:P1>af.tx1.netweaver</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>3: Unable to find URL for Adapter Engine af.tx1.netweaver</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.tx1.netweaver</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Any idea ,when we get this error usually.

  • Error when reading the DDIC-data for table

    Hi Tobias
    We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
    To test initial load, we stopped replication for an existing table and then started replication for the same table.
    Mass transfer id connects ECC system to BW on HANA system.
    Replication errored with the following message:
    Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
    Looking for your guidance.
    Kind Regards
    Kamaljit Vilkhoo

    Was able to solve using oss note 1972533.

  • Error when generating the text environment

    Hi Friends,
    When iam logging on to SAPGUI iam able to lauch the gui but no text elements are being displayed the screen is completely blank and when i try to execute any transaction or perform any action.. the following error is getting displayed.
    Err:sapgui:620
    Error when generating the text Environment.
    Please provide me the necessary help.
    Regards
    Khaiser

    Hi,
    Just a suggestion (not sure it will work) - upgrade your SAPGui to the latest one e.g. 7.10 or patch it.
    Do you see text elements if accessing the sytem using DE language ?
    Regards,
    Mike

  • Read error when reading the master data of 0EMPLOYEE on demand, attribute 0

    Hello All,
    While loading data for HR data source 0HR_PA_OS_1 i am getting the below error message..
    Error 1 in update.
    Read error when reading the master data of 0EMPLOYEE on demand, attribute 0COMP_CODE
    Please let me know how can it be resolved.
    Regards
    Rohit Parti

    The problem occurs during data load from R/3. It was not occuring before. When I go to check the PSA contents I get a runtime error - GETWA_NOT_ASSIGNED.
    Error analysis                                                      
        You attempted to access an unassigned field symbol              
        (data segment 32821).                                                                               
    This error may occur if                                         
        - You address a typed field symbol before it has been set with  
          ASSIGN                                                        
        - You address a field symbol that pointed to the line of an     
          internal table that was deleted                               
        - You address a field symbol that was previously reset using    
          UNASSIGN or that pointed to a local field that no             
          longer exists                                                 
        - You address a global function interface, although the         
          respective function module is not active - that is, is        
          not in the list of active calls. The list of active calls     
          can be taken from this short dump.

  • Extract the text data

    Dear SDNs,
    My client wants to extract the data from invoice text types like he wants to find out the text data in each text fields which are maintain in the invoice item level.
    please advice my above scenario.I dont know where it could be stored and how i will extract them.
    Thanks,
    KV

    hi
    goto STXH
    find your text object : VBBP
    Text Name
    Text ID  (which you created at text determination 4 digit which you have added to billing as text determination)
    Text Name:
    note down the above
    now goto SE37 and enter READ_TEXT run
    enter as below
    ID
    LANGUAGE
    NAME
    OBJECT and execute then click on tables icon then you can get the text which you have maintained in ur invoice
    Take the help of ABAPPER
    regards

  • Error when initializing the Transaction data From ODS to CUBE.

    Hi,
       we have initialized the load from source system to ODS. the load was successful, and when loading from ODS CUBE(initialization). it is giving the following message.
    No SID found for value '0000436038' of characteristic 0CUST_SALES.
      We have updated the master data of 0CUST_SALES (DELTA UPDATE).
    but still getting the same message when updating the data packets from PSA. I am unable to find the reason.
      Please let me know is there any other solution.
    with regards,

    Hi A.H.P,
       I have loaded master data for all the objects you have mentioned( atributes and texts). but still data packets are not getting updated. it is giving the message.
       i have also tried the elementary tests and combined tests of 0CUST_SALES, in RSRV. there were no errors found.
      these data targets were newly implemented. would it be problem with routines or any other means.
      Please let me know ASAP.
    with regards.

  • Error when loading the master data

    Hi all,
    Can anybody help me out. I am loading the master data from DB Connect source. When i am trying to load it it is giving the runtime error PERFORM_CONFLICT_TAB_TYPE. Can anybody tell me what could be the problem & necessery steps to take.
    Thanks in advance.
    Regards,
    Shaik.

    Hi,
    Please go through the following threads:
    PERFORM_CONFLICT_TAB_TYPE  shortdump during data loading into ODS
    Perform_conflict_tab_type error
    PERFORM_CONFLICT_TAB_TYPE error-Urgent!!
    Next time you might want to just search the forum first... lots of surprises!
    Hope this helps,
    Cheers,
    Gimmo

  • Empty paragrpahs in a textflow cause runtime error when displaying the text

    Hello there,
    when I create a textflow which has empty ParagraphElements in
    it (i.e. a ParagraphElement without any children) I get this
    runtime error once I try to display the text in a container:
    Error: Error #2175: One or more elements of the content of
    the TextBlock has a null ElementFormat.
    Is this a bug, or is there a legitimate reason for this
    error? If so, I'd like to understand why. In my reasoning an empty
    ParagraphElement should just result in the rendering of a newline.
    But maybe I'm thinking too much in HTML terms here...
    I appreciate any light you can shed on this,
    thanks in advance,
    Roland
    P.S. I'm using the latest build 370

    Hey Richard,
    thank you very much, and I was indeed already using your
    mentioned workaround, I was just wondering whether it was a bug or
    something I didn't fully understand :) But now I do, so thanks for
    your time.

  • Error when activating the copied data elem.:Medium key word in language DE

    Hello,
    I have copied data element dats and created a z data element for myself and added the text description.
    Am getting following error.Please guide me for the same-
      Check data element ZDATS1 (C04EAPHALES/15.01.10/16:37)
      Medium key word in language DE: length 18 > maximum length 10
      Data element ZDATS1 is inconsistent
    Please help me resolve the issue.
    Thanks.
    Edited by: sanjivrd on Jan 15, 2010 12:21 PM

    Hi,
    It won't take from domain it always takes from data element... data element only stores the semantic information... Try to change the domain description to someother and then activate both domain and dataelement...and also table and then see...It will take from data element only.
    Regards,
    Nagaraj

  • Error When Extracting the UD Connect Source Objects

    Hi,
    I am working on UD Connect to extract data from an external Oracle Database System. I have done all the required configurations from the Visual Admin and BI side.
    When I click on F4 help on 'UD Connect Source Object' in the 'Extraction' tab of Application Component, I am getting a message " Extraction of existing UD Connect data source objects". But, the message reamains the same forever. I mean, the source objects(tables) are not displayed.
    Message no. RSDS_ACCESS030
    But, this is working fine in the Web.
    1) We have tested the BI JDBC Connector using the URL:
    http://xxxabcdev03:50000/TestJDBC_Web/TestJDBCPage.jsp
    We got the list of tables displayed, implies connector is configured properly.
    2) When we are trying to configure the Source system in rsa1->modelling->source systems-> UD connect -> create,
    following are the values given:
    a) RFC: The RFC we have created from BW to Java.
    b)Logical System Name: We have manually typed in free text 'UDC_local'. Could you please clarify do we need to type in manually or select the logical system name from the F4 help?
    Which logical system name should we enter here exactly.. pls clarify.
    Do we have a seperate logical system name for the J2EE server...?
    c) Type of Connector : JDBC
    d) name of connector: SDK_JDBC
    e) Source system name: SDK_JDBC
    f) Type and Release : blank
    Please clarify, if we went wrong anywhere.
    Regards,
    Srinivas.

    Hi Srinivas,
    even i am facing the same problem,had you resolved it,if so pls help me out in resolving
    i have been in the same approach and even i am not clear with the logical system name(i have give a generic name) and even i tried given with the bi logical system name but it shows source system has got the same name as bi.
    i got struck there,pls guide me
    thanks in advance.

Maybe you are looking for

  • LV 8.5 opens all sub-VI front panels

    Hello, Recently I again saw a strange occurrance that has happened to me about 10-12 times over the past year. Here specifically I am using LV 8.5 with the cRIO and FPGA module. When I was running a new RT VI from the developer environment, (deployin

  • New OS from ATT a step back?

    Can anybody tell me what the new OS from ATT was suppose to fix? So far 90% apps don't run which I guess might be normal with a new OS. But BB world is slow to  load now on wifi and almost impossible when I'm on 3g. Did download rhw theme app which h

  • After my daughter's Macbook Pro was fixed it asks for a username and password. She doesn't have one! Help!

    The hard drive crashed on her Macbook Pro (bought it in 2011) so she brought it to the Apple Store to get fixed. Now when she turns it on there's a blue screen with the Apple Mac OS X sign-in box in the middle asking for her username and password. Sh

  • RD Gateway and RD Web Access - better together or on different servers?

    I am evaluating Remote Desktop Services with 2012 R2 and initially I had all the roles on 1 server for testing.  I began thinking it would be a better setup to split the RD Gateway role and the RD Webaccess role into different servers for security pu

  • New Comp/wireless G

    I am about to purchase a new comp, I already have a Wireless G router at home set up, what exactly do I need with this new comp to get wireless running? I am purchasing a Dell xps 410.