Error when generating IDoc from MC document - workitem to all the SAP users

A workflow item with the subject of Error when generating IDoc from MC document is sent to all the SAP users' inbox. Is it possible to stop the generation of this work item? If that is not possible, can we limit sending the work item to a specific user/agent instead of all the users in the system?
It appears that these work item or error message are generated when one of the developers reopen the POs and add line items. Moreover, during that time the procurement team blocked the IDOCs from going out to the vendors when changing and resaving the POs. Therefore, we need stop the generation of error message/work item when the IDOCs generation blocked.

Please check Rule 70000141which is the default rule for this task. Inside this rule a FM is attcahed which is reading table EDO13 and EDPP1 where agent is retrieved Probably this table entries are not maintained. This Workflow is getting triggered from Message cOntrol I think.
Please check this link for
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
Reward points if useful and close thread if resolved

Similar Messages

Error when generating IDoc from MC document

Hi,
Our Workflow administrator is getting the following error in his inbox daily for a particular IDOC type.
Error when generating IDoc from MC document
Please let me know how to disable this message.
Regards
Elini.P

Hi experts,
i got the error msg when generating idoc from mc document
this error msg goes to all sap users inbox,how to resolve this problem
pl give me solutions
regards
kumar

HELP!? Remove 1 page from long document and shift all the rest pages

Hello,
I am facing to following problem:
I have a long document with facing pages. Now I need to remove one left page in the middle of the document and shift all the rest pages one step forward. It means from all right pages do a left and vice versa (started from the page that was removed). There is a continous text int the whole document and left/right strip made from different photos.
To clarify the situation I am attaching the preview. I have deleted page no.12 and I need to shift page 13 to left, 14 to right after 13, 15 to left, 16 to right after 15 and so on....
Is there any simple way how to do it?
Thank you very much for any tips.

It looks to me as if you may something else going on here. Are you using right-to-left text here so the document binding would be onthe right when the book is closed? If not, your problem is not with page 13 so much as it is with the earlier pages.
Unless you force it to do otherwise by disabling page shuffling someplace, in left-to-right documents using facing pages ID will always put odd numbered pages to the right of the spine and even to the left, the opposite for right-to-left documents. In either case, it seems like you have page shuffling disabled either for the whole file or for a selected spread. You can re-enable it from the menu in the Pages panel. When ID asks if you want to maintain the current number of pages on a spread you should probably say no. Either pages 1-12 will swtch sides, or 13 and following will, and your spreads will rearrange to put two pages together as they should be.
If you have overridden master page objects, a side effect of switching sides on the spread will be that the overridden objects will remain and the new master objects from the other side of the spread will appear behind them.

Error when exporting IDOC from one XI system to another

Hi all,
When I do an export for an IDOC from my one XI server to be able to import it into another I get the error below. The funny thing is that it works perfectly for my COND_A idoc but not at all for DEBMAS and MATMAS idoc.
Any ideas?
Error during export. Internal error during pvc call: SAP DBTech JDBC: Result set is positioned after last row.
Regards,
Liesel

Hey,
I guess you are using MAXDB,
please read note number 1055246
(Inconsistent XI content caused by bug in MAX DB)
Good luck!

Error in generating IDoc from F110

Hi All,
Please help me in solving this error, I am strucked in generating I-Doc. from Payment Program (F110). After running the APP program successfully, I am getting the following message:
Payment by EDI / IDoc generation----
"IDocs were generated for the followings entries.
Company Code: XXXX, House BankXXXX, Payment Method X.
IDoc type could not be determined for the IDoc...."
Though message says IDoc is generated, but not seen anywhere. I have checked in WE02 (I Doc List)
Here apart from the basic settings for running the APP like, House Banks, bank determinations etc.,
1. I have maintained----
EDI Partner Profiles in FI12 and WE20 with partner Type-B.
2. In OBVCU, Payment Methods/Country: I have done the followings settings to the payment methods---C & T ; Under "C"----Under Payment medium: I have selected Classic Payment Medium Programs: RFFOEDI1 and the same settings in "T" also.
3. In OBVU, Payment Method in Company code: Under "C": under Form Data: For Form for the Payment Medium: SAP Script and F110_EDI_01 and same for Next form. and the same settings for Payment Method "T".
4. Maintained the required settings in the Vendor/Customer Master Data.
5. Also maintained Variant in Printout/Data medium tab in F110
Pls. let me know what are all the other settings which need to be done apart from the above, Do we need to do the RFC settings also?
Can somebody helpme in solving this issue?
Regards,
Aman

Hi,
The following details i have already maintained in the I Doc type under;
Outbound parameters of WE20,
1)Message Type: DRDEB, Receiver port: A000000043, Basic type under IDOC type: PEXR2002
2)Message Type: EUPEXR, Receiver port: EUPEXPORT,Basic type under IDOC type: IDCREF01
3)Message Type: PAYEXT, Receiver port: SUBSYSTEM, Basic type under IDOC type: PEXR2001
4)Message Type: DRDEB, MESSAGE CODE: IHC, MESSAGE FUNCTION: IHC, Receiver port: A000000043, Basic type under IDOC type: PEXR2002
Inbound parameters:
Message Type: FINSTA, PROCESS CODE: FINS
Plz. let me know if i missed out anything.
regards,
Aman

Error when posting Idocs From XI to SAP by Partner Profile

Hi all.
i have a problem. all my inbound IDocs in R3 use PP(Partner Profile) LS_XID.
but i need to send IDoc MATMAS by a diferent PP (LS_MATERIALS).
So, i added a new BS in transaction BD54.
In transaction BD64 re-desing the Distribution Model as follow
SL_130 (R3 DES)
> LS_MATERIALS (XI)
|> MATMAS.
In transaction WE20 define the new PP LS_MATERIAL. In inbound table add the MATMAS IDoc. Later imust delete de MATMAS IDoc from LS_XID list. same as transaction BD64.
My problem is when send the MATMAS to R3. it is still using PP SL_XID, so IDoc get status 56 (EDI: Partner Profile Inbound not Available) in R3.
Why?? Any IDea??
Thanks & Regards
Rodrigo.

Hi,
Please check the Logical system,Business system, configurations ,please see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
Regards
Chilla..

Jdeveloper 11.1.1.0.0 - Error when generating webservice from Collection or

Hello.
I get the error when I like to publish a method which return a Collection..
for example I have a Class:
package in2;
import java.sql.Connection;
import java.util.ArrayList;
import java.util.List;
import java.util.*;
import javax.jws.WebMethod;
import javax.jws.WebService;
public class servis {
    public servis() {
    public String hello() {
        return "PETER";
    public Collection vrniPodatke() {
        Collection l = new ArrayList();
        l.add ( new OptionList("PTER","VALENCIC"));
        return l;
    public int sestej (int a , int b) {
        return a+b;
==========
package in2;
    public class OptionList {
        String a;
        String b;
        public OptionList(String a, String b) {
            this.a = a;
            this.b = b;
        public void setA(String newa) {
            this.a = newa;
        public String getA() {
            return a;
        public void setB(String newb) {
            this.b = newb;
        public String getB() {
            return b;
    }The error I get is:
java.lang.RuntimeException: Cannot find namespace for: ns1
     at oracle.j2ee.ws.wsdl.extensions.oracle.schema.BaseSchemaElement.getQNameFromValue(BaseSchemaElement.java:185)
     at oracle.j2ee.ws.wsdl.extensions.oracle.schema.BaseSchemaElement.getAttributeValueAsQNameOrNull(BaseSchemaElement.java:173)
     at oracle.j2ee.ws.wsdl.extensions.oracle.schema.ElementSchemaElement.getTypeAsQName(ElementSchemaElement.java:63)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.SchemaValidator.validate(SchemaValidator.java:145)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.SchemaValidator.validateSequence(SchemaValidator.java:414)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.SchemaValidator.validateComplexType(SchemaValidator.java:224)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.SchemaValidator.validate(SchemaValidator.java:157)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validateElement(WSDLValidator.java:709)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validateParts(WSDLValidator.java:667)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validateMessage(WSDLValidator.java:644)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validateOutput(WSDLValidator.java:604)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validateOperations(WSDLValidator.java:596)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validatePortType(WSDLValidator.java:585)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validateDefinition(WSDLValidator.java:97)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLValidator.validate(WSDLValidator.java:68)
     at oracle.j2ee.ws.common.processor.modeler.wsdl.WSDLModeler.buildModel(WSDLModeler.java:247)
     at oracle.j2ee.ws.common.processor.config.ModelInfo.buildModel(ModelInfo.java:171)
     at oracle.j2ee.ws.common.processor.Processor.runModeler(Processor.java:73)
     at oracle.j2ee.ws.tools.wsa.AssemblerTool.run(AssemblerTool.java:126)
     at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createModel(WsdlToJavaTool.java:471)
     at oracle.j2ee.ws.tools.wsa.Util.createDeploymentDescriptors(Util.java:913)
     at oracle.jdeveloper.webservices.model.generator.GenerateDescriptors.action(GenerateDescriptors.java:146)
     at oracle.jdeveloper.webservices.model.java.generator.JavaEjbGenerateDescriptors.action(JavaEjbGenerateDescriptors.java:78)
     at oracle.jdeveloper.webservices.model.generator.GeneratorAction.run(GeneratorAction.java:151)
     at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
     at java.awt.Dialog$1.run(Dialog.java:525)
     at java.awt.Dialog$2.run(Dialog.java:553)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:551)
     at java.awt.Component.show(Component.java:1300)
     at java.awt.Component.setVisible(Component.java:1253)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
     at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:358)
     at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:222)
     at oracle.ide.dialogs.ProgressBar.start(ProgressBar.java:194)
     at oracle.jdeveloper.webservices.model.Model.saveEditSync(Model.java:226)
     at oracle.jdevimpl.webservices.wizard.jaxrpc.WebServicesEditor.showDialog(WebServicesEditor.java:296)
     at oracle.jdevimpl.webservices.WebServicesAddin.findAndInvokeWizard(WebServicesAddin.java:1408)
     at oracle.jdevimpl.webservices.WebServicesAddin.handleEvent(WebServicesAddin.java:837)
     at oracle.ide.controller.IdeAction.performAction(IdeAction.java:506)
     at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:779)
     at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:479)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
     at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
     at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
     at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
     at java.awt.Component.processMouseEvent(Component.java:5501)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
     at java.awt.Component.processEvent(Component.java:5266)
     at java.awt.Container.processEvent(Container.java:1966)
     at java.awt.Component.dispatchEventImpl(Component.java:3968)
     at java.awt.Container.dispatchEventImpl(Container.java:2024)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
     at java.awt.Container.dispatchEventImpl(Container.java:2010)
     at java.awt.Window.dispatchEventImpl(Window.java:1778)
     at java.awt.Component.dispatchEvent(Component.java:3803)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
     at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
======================
What I'am doing wrong?

I don't know what is happening with Jdeveloper ?!?!
I have tryed the same example at home with Jdeveloper 11.1.1.0.0 Build JDEVADF_MAIN.DROP5_GENERIC_071218.2321.4796
All works fine.....
What you think could be wrong (in my first post)? Why I have received the error? and why the same project works on other computer?
can someone reply to my post?

When I open a HTML document in Safari all the images change to a ? How do i stop this and get the images back?

When I open a HTML document in Safari rather then getting an image, I get a ? in a box. Why is this and how can I change it to get the images back?

monkeyde,
You are getting entagled in the two confusing meanings of the term pixels, namely as a unit identical to points and equalling 1/72 inch, and the basic component of raster images (and effects).
You can read on in this very recent thread:
Is there a way to get Illustrator to know how many pixels are in an inch?

Error when downloading application from Server

Hi,
I have installed MI Client 7.0 SPS 11 Patch 0 on Symbol Device ;OS Windows Mobile5.0
i have successfully completed first synchronization .
After that i assigned Mobile Component to the device and tried synchronizing.
"Error when downloading application from http://<servername>:50000/meContainerSync/servlet/com.sap.ip.mi.http.MobileComponentServlet?Application=xyz&Type=APPLICATION&Runtime=JSP"
Pl. suggest
Note: In NWA under 'Device Maintenance' -> Mobile component
The state of the aplication is "Deployment Activated"
rgds,
Kiran Joshua
Message was edited by:
Kiran Joshua

Hi ALL,
I resolved it on my own guys !!!
Actually while downloading server url consists of hostname bcoz the hostfile entry in windows/system32/drivers/etc/hosts was only hostname.
i entered FQDN name in the hostfile... It WORKED
Being Saturday and Sunday...i cud not get any help from forums...i was really worried and Guys we need to think on this :-?
rgds,
Kiran Joshua

Error when importing IDOC structure from SAP - Control record missing

Hi!
We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

Hi Duncan,
Taka a look at these threads which address similar issues:
Error during import of FIPARQ01 Idoc
Error during IDoc Import
Importing idocs:
http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
Hope these help!.
Cheers,
Chandra
Message was edited by: chandravadhana gopalakrishnan

Errors when generating a adobe form in report

Hello,
I have a problem with the solution of the errors to generate an adobe form. I put in a situation:
- I need to create a form with several dinamic tables, each below the previous. For each dinamic table, apart from the header row (column titles) was necessary to create a table title above the header. Furthermore, this title should remain with the table, for example, if the header row and first row of the table is not entering the page, jump to the next page (but so must the title of the table next to them)
My version of LCD is version 9.0.1.0 and adobe reader is 10.0
One possible solution is proposed in this link (put text above the table with the title and check "Keep with Next "):
http://forums.adobe.com/thread/849603?tstart=0
This solution works correctly in the Preview in Adobe Live Cycle Designer, but when I run the form with a report generates an error file "error.pdf" Does anyone know who is that? The lines of code in which failure is just where the title of the table causes "Keep with Next ". In the Adobe forum, I have commented that the utility began to be usable in version 8.2 of ADS, we believe we have the 8.0 but not sure.
ERRORS:
Render status: success with warnings (pdf' Log Entries)
Invalid version: The current version of the XFA template model exceeds the capability of XFAPresentationAgent.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 212.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 594.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 1123.
Invalid version: The current version of the XFA connectionSet model exceeds the capability of XFAPresentationAgent
Invalid version: The current version of the XFA template model exceeds the capability of Acrobat / Adobe Reader 7.0.5.
Unrecognized namespace XFA 2.8, defaulting to XFA 2.1
Render status: success with warnings ('pcl' Log Entries)
Invalid version: The current version of the XFA template model exceeds the capability of XFAPresentationAgent.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 212.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 594.
Invalid append operation: draw cannot have a child element of keep
The fault occurred on line 1123.
Invalid version: The current version of the XFA connectionSet model exceeds the capability of XFAPresentationAgent
Unrecognized namespace XFA 2.8, defaulting to XFA 2.1
PS: I searched the forum but I can not understand the answers.
Thanks very much
Edited by: jmgaley on May 13, 2011 1:52 PM

Hello,
I found a possible cause of my failures. Has anyone needed to change the default version of PDF generated by ADS (Adobe Document Services)?
"Changing the Default PDF Version"
http://help.sap.com/saphelp_nw04s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
My forms always generated pdf 1.6 (Acrobat 7.x), so they are generating so many errors. Also when I use the preview of the SFP transaction form, the need for PDF version is "1.7, Adobe Extension Level 3 (Acrobat 9.x)"or "1.7, Adobe Extension Level 5 (Acrobat 9.x) " (changing Form Properties -> Defaults -> Version of destination)
How do you get out this version from the ADS? What you need to change?
Greeting and thanks

Error when posting IDoc *** in system ERP100

Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imre

Hi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan

Error Loading Hierarchy Error when updating Idocs in Source System

Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanks

Hi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi.

Error when updating Idocs in Source System - Urgent

Hi Team,
When i was loading the data from SAP R/3 to BW, i was facing the error "Error when updating Idocs in Source System" (0 From 0 Records).
When i check in the Environment>Transaction RFC->In the Source System, it was displaying the error--
" Import container contains errors (are any obligato) in the Function Module: IDOC_ERROR_WORKFLOW_START_R".
Can any one please help me to solve this error.
This is am Urgent requirement for me to deliver.
Thanks & Best Regards,
Venkata.

Hello VenkaTa,
How r u ?
The workflow settings are not proper it seems. Ask the BASIS people to correct the Work Flow Settings. Then try Updating the IDOCs manually.
Also check the Inbound and outbound IDOCs in the Source system. The outbound should contain some warnings or errors.
Best Regards....
Sankar Kumar
+91 98403 47141

Error when updating Idocs in Source System

Hi All,
We did a recent copy from QAS to DEV,after which am unable to run my process chains ,the load status still showin yellow signal,whereas job is getting finished but am unable to load datas to the targets. Am getting the following error message when i see the display message in process chain.
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
Error when updating Idocs in Source System
Could anyone please let me know what can be done ?
Thanks
con

Hello All,
I have same problem but its RESOLVED by the following process.
Step - 1
execute the Function module "SCP_LANGUAGES_IN_INSTANCE". It may or maynot give some output. Just note if it give the output
Step - 2
in Transaction SE38 execute the program "RSCPINST".
Just Click on the Activate button (dont select anything).
Step - 3
Again do the same thing specified in Step - 1. Now it will give the output saying that Language is DE.
So by the above procedure my issue is been resolved.
Regards
Sankar

Error when generating IDoc from MC document - workitem to all the SAP users

Similar Messages

Maybe you are looking for