Error when generating the report (see long text), Message no. AQ_AD_HOC221

Hi All,
I am facing a peculiar problem while executing an infoset query.I have created 2 customized fields Compa-ratio and PIR in infotype 0008 in an infoset.I have coded in these additional fields.
When I execute a query using 1 of these customized fields the report is generated correctly.But when I put both the fields in the output the report shows an error "Error when generating the report (see long text)". The message# associated with this errAQ_AD_HOC221.
I have also checked the data types and the references. Nothing seems to be wrong here.
Does anybody has any clue about this ?
Kajal

Hi Bernd,
I had a look at those notes. But the information provided did'nt prove to be helpful. I found out the problem. I was using the same local variable for both the fields in their code. This generated the error. This error is a very generic one and does'nt help in finding out what exactly is the problem.
I changed the other local variable and it started working. When I was using the same variable that time I did'nt forget to clear the values but the query still generated the error.
Anyways thanks a lot for the reply.
Kajal

Similar Messages

Error when generating the report in Production Server

Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
Samriddhi

Samriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks.

Loaded data is not yet visible in Reporting (see long text) Message no. RSM

Hi All,
I have one issue in BI part of Solman. For one of the scenario of Solution Manager uses its own BI component (BI_CONT 7.03 SP08 SAP_BW 700 SP15).
There is one background job which has to update the data in one of the infocube 0SMD_PE2D. This job is getting failed for the past 2 months.
When i check the logs of that background job, it shows the long text as below.
Loaded data is not yet visible in Reporting (see long text)
Message no. RSM1130
Diagnosis
There is an inconsistency between the load status of the data and the option of reporting on this data.
There is data in the InfoProvider that is OK from a quality point of view, but is not yet displayed in reporting.
The problem, for example, is to do with request 0000000494, number APO_R4CEHVODV7XS7MRL741GSMV9UB.
Procedure
Choose Refresh to remove the inconsistency.
I went to RSA1 and selected that cube and choose "Execution changes - Manage". On the right hand side under request tab page it shows all the requests with request status as Green. In Monitor there is No Data Available
I found a similar thread [Loaded data is not yet visible in Reporting for Data Mart destination cub; unfortunately solution is not updated.
Could any one help me
regards
Naveen

Hi Aduri,
In LISTCUBE i am getting the following error
SQL Error 0
Unknown error in SQL interface
System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE
Source system is Solution Manager only, production client and BI by default its running in 001 client. We dont have any APO system in our landscape.
Kindly advice
Regards
Naveen

Error when generating the selection screen '0005'of report 'XYZ'

Hi All,
We copied std SAP pgm and were trying to rename the one of the screen but couldnt. When I tried to transport it to test system it went in to dump giving the error Error when generating the selection screen '0005'of report 'XYZ' .
Please advise me on how to remove this dump.
Regards
Saurabh

If you look at the selection screen, you'll probably find that there are overlapping elements (text elements over select-options) or something like that.
Rob

Error when generating the text environment

Hi Friends,
When iam logging on to SAPGUI iam able to lauch the gui but no text elements are being displayed the screen is completely blank and when i try to execute any transaction or perform any action.. the following error is getting displayed.
Err:sapgui:620
Error when generating the text Environment.
Please provide me the necessary help.
Regards
Khaiser

Hi,
Just a suggestion (not sure it will work) - upgrade your SAPGui to the latest one e.g. 7.10 or patch it.
Do you see text elements if accessing the sytem using DE language ?
Regards,
Mike

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Loaded data is not yet visible in Reporting (see long text)

hello
all
I have the next problem : in transaction RSA1, with infocube 0SD_C03 (Sales: Overview) click right/option/manage. appear the next message "Loaded data is not yet visible in Reporting (see long text)", when execute the rollup, show the next message : "Request 'REQU_48QRSOY3PVEJYDCO1B9II221D( 23393)' in DTA '0SD_C03' locked against Qualok using real-time Planning
as I solve this problem ?

Jurado,
What is the frequency of your real time load? was it loading when you query the cube? Have you checked the status of the load? Yellow, if Yellow and if the load is completed Change the technical status to Green and you should be able to see the data. Are you sure your query restriction (if any) satisfies the data?
Probably if you look closely you would know the answer.
Goodluck,
Alex
(Arthur Samson)

Error occurred in derivation rule. See long text ; Message no. K/110

I am facing the below error when posting document in FI
Error occurred in derivation rule. See long text
    Message no. K/110
    CO-PA Characteristic Derivation
Diagnosis
    Step 0166 5400: Profit Center in Inventory Posting
    No derivation rule entry was found for the specified source values valid
    on 02.04.2014.
    The derivation rule was defined so that an error message is displayed
    when this occurs.
    The system could not find a rule entry valid on 02.04.2014 for the
    following source fields:
     Product Group
Procedure
     Create a rule entry for these source values and make sure that rule
     entries exist for all the source values.
     If you do not want the derivation to be performed in every instance, you
     can also change the derivation rule so that no error message is
     displayed if a rule entry is missing.
     Maintain entries
     Maintain derivation strategy
In KEDE:
In KEDR:
Please help me what might be the reason.

Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas

Error occurred in derivation rule. See long text, Message no. ABADR100,

Hi
I am making some testing and I have the following message , which is about the functional area. I did not use the FM derive:
Error occurred in derivation rule. See long text
Message no. ABADR100
Diagnosis
SAP - Original Generic 4.7 Ver: Funded Program fro
No derivation rule entry was found for the specified source values valid on 22.06.2011.
The derivation rule was defined so that an error message is displayed when this occurs.
The system could not find a rule entry valid on 22.06.2011 for the following source fields:
Financial Management Area/Functional Area
Z001/6000
Procedure
Create a rule entry for these source values and make sure that rule entries exist for all the source values.
If you do not want the derivation to be performed in every instance, you can also change the derivation rule so that no error message is displayed if a rule entry is missing.
please help

Hi Thanga,
I don't think this is the right group to ask questions relevant to Controlling-Profitability Analysis.
otherwise, it seems in your 'Characteristic Derivation/ Display Rule values' you are missing an argument 'to Product Group', therefore the system gives you this error 'The system could not find a rule entry valid..'.
hope this will help you.
Kind regards,
Renatas

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

Error when Generating the Selection Screen?

Hi Guys,
               When i am executing the program with this code .I am getting this type of Error
" Source code   ZUSFICOR00013_MM_ACNT_COSTING                Line     0
Error when generating the selection screen "1000" of report
             I got this Error while activating my program.The code which i wrote is the below one.
SELECTION-SCREEN: BEGIN OF LINE.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN COMMENT 2(10) TEXT-004 for field s_matnr.
SELECTION-SCREEN: END OF LINE.
Thanks,
Gopi.

Hi Seshu,
              While doing EPC for the Below code
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(15) TEXT-004 for field s_matnr.
Select-Options : S_MATNR for MBEW-MATNR ."MatchCode Object MAT1,
SELECTION-SCREEN: END OF LINE.
              I am getting an Warning like " Selection text or parameter for selection field S_MATNR is not maintained" How to coorect this one?
               and also for the this Below Code
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'BWKEY'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Plant'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'MAKTX'.
s_fieldcatalog-tabname = 'i_MBEW_out'.
s_fieldcatalog-seltext_l = 'Material Description'.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
                 I am getting EPC Error like " Char. strings w/o text elements will not be translated:
'Plant'"
     Can u please tell me How to correct these type of EPC Error's.
Thanks,
Gopi.

'Error when generating the selection screen "0500"

Dear all,
I have copied a function group QEES to ZQEES through SE80. In that I have copied all screens, includes, function modules etc..
Now when I activate the ZQEES, I get an error 'Error when generating the selection screen "0500" of report "SAPLZQEES'.
There is no problem with screen 0500, I have activated it.
But when I activate ZQQES, I get the error.
Please let me know the reason for this.
It will be highly appr
Thanks in advance,
Sachin

Hi Sachin,
there could be a problem while copying in renaming, delete the Function group ZQEES and recopy the Standrad function group and only rename the the FM QEES_SHOW_SELECTION_SCREEN to ZQEES_SHOW_SELECTION_SCREEN and copy and activate it will work.
regards,
Srini

Error when selecting the Report Center tab of the Issues web DB

I started a DB from the Issues web DB template. Everything worked fine when I shutdown last night, but this morning I started receiving the following error when selecting the Report Center tab.
You must specify an object for the BrowseTo to open. I have noticed that the ReportCenterDefault form no longer displays. How do I correct this?

Hi Ben
Wyer,
Have you resolved
your problem yet, and does the suggestion help you? If you still have any concern on the thread, feel free to follow up.
Best Regards,
Bruce Song [MSFT]
MSDN Community Support | Feedback to us
Get or Request Code Sample from Microsoft
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

Error when generating the update program::::ID RSAU No. 484****

Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
     An error occurred during program generation for InfoSource
     2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
     incorrect update rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
amit shetye

hi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep

Error while generating the report on Test env (for divide condition)

Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advance

Is anyone having any idea about it...

Error when generating the report (see long text), Message no. AQ_AD_HOC221

Similar Messages

Maybe you are looking for