Error when I create the New material Master (MM01) for New Plant.

Dear experts,
I got the error when I create the New material Master (MM01) for New Plant.
Error:  Valuation Area 2800 Not yet productive with Material Ledger.
So Pl send me the solution asap.
Venkata Raju Khottari

Hi,
Have u assinged Plant to Company code?
If u say no, use T.code OX18.
Regards,
Murali
Assign points if it is useful.

Similar Messages

  • Error when we create the source system file

    i am creating the source system file of ECC to BI. how to slove this problam. when i am trying activating this error is getting.
    The following errors occurred in the source system:     RSAR     374     
    Result of the destination check: Timeout     RSAR     375

    Mr. Reddy,
    Check out this links.
    Error while source system creation/Source system transport
    Hope it helps you.
    SRS

  • Error when I create the database

    I install the peopletools 8.49 for Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 and my operating system is Microsoft Windows Server 2003 Enterprise Edition Server Pack 1, v.1023.
    When I have installed the peopletools and the database, I modify the scripts in <PS_HOME>\scripts\nt and then change to <PS_HOME>\setup\PsMpDbInstall and double click setup.exe to run the database configuration wizard. All of the scripts are running correct, but the Data Mover is error. So I run the Data Mover manually. I create Data Mover import scripts and run it. It’s ok. Then I check the logs. I find the follow error:
    psadmin.log:
    ALTER TABLE SQLPLUS_PRODUCT_PROFILE ADD (LONG_VALUE LONG)
    ERROR at line 1:
    ORA-00942: table or view does not exist
    psdmtx.log:
    PSDMTX Error: signon
    verifyToolsVer.log:
    select TOOLSREL from PSSTATUS *
    ERROR at line 1:
    ORA-00942: table or view does not exist
    sqlnet.log:
    Fatal NI connect error 12557, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=cs.lab.net)(PORT=1521))(CONNECT_DATA=(SID=PSDB)(CID=(PROGRAM=C:\pt\bin\client\winx86\psdmtx.exe)(HOST=CS)(USER=Administrator))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 10.1.0.5.0 - Production
    Time: 19-MAY-2009 15:33:27
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12557
    TNS-12557: TNS:protocol adapter not loadable
    ns secondary err code: 12560
    nt main err code: 527
    TNS-00527: Protocol Adapter not loadable
    nt secondary err code: 0
    nt OS err code: 0
    Then I run version application engine program:
    C:\Documents and Settings\Administrator>C:\pt\bin\client\winx86\psae.exe -CD PSD
    B -CT ORACLE -CO SYSADM -CP SYSADM -R INSTALL -AI VERSION
    Message Set Number: 0
    Message Number: 0
    Message Reason: Invalid User ID and password for signon. (0,0)
    Error in sign on
    PSDB: database name
    SYSADM: peoplesoft owner id
    How can I resolve it?

    I create the database manually too. The errors are the same. I can login in data mover by SYSADM user or people user and the database and listener is running. However, I run version application engine program:
    C:\Documents and Settings\Administrator>C:\pt\bin\client\winx86\psae.exe -CD PSDB -CT ORACLE -CO SYSADM -CP SYSADM -R INSTALL -AI VERSION
    Message Set Number: 0
    Message Number: 0
    Message Reason: Invalid User ID and password for signon. (0,0)
    Error in sign on
    I change the user to try, it’s the same.
    Edited by: hzg on May 21, 2009 9:38 AM

  • Time Machine Error: Unable to complete backup. An error occurred while creating the backup folder.

    Hi,
    I'm using time machine to do my backups but now is not  working.
    I'm getting the following error:
    Unable to complete backup. An error occurred while creating the backup folder.
    Thanks for your help

    See #C10 in Time Machine - Troubleshooting.

  • How can I know the new Material Master has been created?

    Does anyone have been tried about how to trigger the new Material Master has been created at a time interaval(maybe an hour or a day)?
    I want to transfer the new Material Master within a given period from SAP R/3 4.6C to .NET Application through standard BAPI or RFC and .NET Connector 2.0. How can I do?
    Any suggestion is wellcome. Thank You.

    Thank you Jiri Ehrlich for answering my question..
    I choose the third way as you suggest..
    ".. 3) Create your own ABAP function to export whole Material Master, call this function from your .NET application and do synchronizing on .NET side (so your .NET application will be RFC client).."
    I've tried RFC that retrieve Material Detail by using BAPI_MATERIAL_GETLIST. It works fine but if I want to retrive the new Material or modified within a given period of time(for example 15 or 30 minutes). How I can do? Is there any standard BAPI or RFC to call from .NET or I have to write new RFC.
    I have little background of ABAP so help me please. If I have to create new RFC, is there any ABAP Function to call or which table I can retrive those information.
    Anyone can suggest?? Thanks in advance

  • I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    I have ad Apple ID on my iPad , when I use the apple on my iPhone for the first time, I put in my Apple ID for the iPad, didn't work. Need to create a new one. Why? How can I just use my iPad ID on my iPhone?

    Hi kamfong,
    Went to Settings where?
    If you want to use your exisiting Apple ID on your iPad, you need to:
    1.     Go to Settings>iTunes & App Store and sign out the new ID, and then sign on the old one
    2.     Go to Settings>iCloud, scroll to the bottom and delete the iCloud account, and the sign back onto iCloud using the old ID
    You still have not indindated why you are saying that using your old ID originally "didn't work". What do you mean by that? Did you get some sort of error when you tried to sign on with your exisiting Apple ID?
    Cheers,
    GB

  • An error occured while creating the new dataset Could not get type informat

    Uses: Windows XP Pro SP3+; OracleXE; Oracle 8i Client; ODP.NET; Visual Studio 2005 PRO;
    I had OracleXE and was using OracleXE's Oracle.DataAccess Version 10.2.0.100 which was located in C:\oraclexe\app\oracle\product\10.2.0\server\BIN. Then to use Oracle Developer Tools for VS, I installed ODAC where the Oracle.DataAccess's version was 2.111.6.20.
    Everything connected via SqlPlus and even was able to Oracle XE Home page and was able to loginto it. Further, was even able to create connection with Oracle Dot Net Provider. The problem was created when I tried to create a datasource from DataSource Menu in VS.2005. It was giving an error saying "An error occured while creating the new dataset Could not get type information for dataset". However I wittnessed that Dataset is been created in Solutions Explorer but not in Data Source Tab. Further researching I was able to create Datasets with Microsofts Oracle Data provider with out any issue.
    My Path variable list the following:
    C:\app\Administrator\product\11.1.0\client_1;
    C:\app\Administrator\product\11.1.0\client_1\bin;
    C:\oraclexe\app\oracle\product\10.2.0\server\bin;
    C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\;
    C:\Program Files\Borland\BDS\4.0\Bin;
    C:\PROGRA~1\Borland\Delphi5\Projects\Bpl;
    C:\PROGRA~1\Borland\vbroker\jre\Bin;
    C:\PROGRA~1\Borland\vbroker\Bin;
    C:\PROGRA~1\Borland\Delphi5\Bin;C:\orant\bin;
    C:\WINDOWS\system32;C:\WINDOWS;
    C:\WINDOWS\System32\Wbem;
    c:\Program Files\Microsoft SQL Server\90\Tools\binn\;
    C:\Program Files\Microsoft SQL Server\80\Tools\BINN;
    C:\Program Files\java\jdk1.6.0_07\bin.
    Further I got 2 Oracle Homes one which C:\orant and other is located in C:\app\Administrator\product\11.1.0\client_1.
    Also noted that while deploying at client site I started gett'n this error:
    "Unable to install or run the application. The application requires that assembly Oracle.DataAcces version be installed in Global Assembly Cache First."
    Is it due to change in the production machine? Any help in this regard is greatly appreciated.

    Hi Pushpa,
    Which enhancement package are you on currently? This is observed in cases where originals in DIR's are invisible and sometimes error message 26296 occurs in transaction CV01n. Hence,please check your entries in the table SDOKPROP to avoid such a problem in your system.
    Further,suggest you explore if the below resolutions can be adopted in your case.
    http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=10321987
    http://wiki.sdn.sap.com/wiki/display/PLM/OriginalsinvisibleafterEHP3or+EHP4
    Regards,
    Pradeepkumar haragoldavar

  • Error while creating a material master (mm01)

    hi,
    I'm getting this error message when I'm creating a material master in a specific plant/sloc. I'm probably guessing its in config. I really need some help here.
    "Tables TCURM and T001W inconsistent; notify your system administrator" .
    could any one  draw some light on this.
    thanks regards,
    chinta

    HI,
    Before creation of plant 1st check in t.code:OMSA and see your plant assigned to field reference.
    Check in t.code: OMSY, see your company code entry & active for material management.
    Also check your plant is active for your material type in t.code: OMS2 with quantity & value updating.
    ###Check assignment of plant to company code in t.code: OX18 and see activation of your valuation are in t.code: OX14
    Just cross check all material master customisation , refer link with t.codes:
    Re: Material Master
    Regards,
    Biju K

  • How to activate the new fields on material master(MM01/MM02/MM03) for existing Materials

    Hi,
    We have a requirement to add  some custom fields as a new tab in additional data option(Descriptions, Unit of measure, etc.) in Basic data of Material master (MM01/MM02/MM03). I have successfully added and these custom fields and they are not part of standard(MARA, MARC) but a custom table and the updates are also done in custom table.
    For new materials, I can see the new tab in additional data screens of basic data view and I could successfully create/change/display using MM01/MM02/MM03. However I cannot see the new tab/fields for existing materials in the system in all 3 tcodes (MM01/MM02/MM03). This is not a main view in material master so that I can extend it by MM01.
    Is there any setting or mass generation program I have top perform so that I can see and maintain these new fields for existing materials. Appreciate any leads or help on this.
    Thanks,
    Harry

    Hello Harry,
    Goto t.code SPRO ---> Display IMG --->  Logistics - General --> Material master --> Configuring the material master --> Create program for customized screens
    Use the above path and create the screen and assign it to the sequence using the below link as reference.
    **************** - Tips - Implementing screen exits for MM01/MM02/MM03
    Regards,
    Thanga

  • Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn't complete the backup to "G-RAID". to complete backup. An error occurred while creating the backup folder.

    Hello I bought a G-Raid GR4 4000 4 TB and used it for a backup with my new Imac27. Now this is all I get. "Time Machine couldn’t complete the backup to “G-RAID”. to complete backup. An error occurred while creating the backup folder."
    Any idea what I should do?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
    If all you see are messages that contain the word "Starting," you didn't clear the search box.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Some personal information, such as the names of your files, may be included — anonymize before posting.

  • MM01 Create New Material Master without Basic view

    Hi,
    The SAP system allow us to create a new material master Purchasing View only (without Basic views). We execute T-code MM01, select Purchasing view only, enter the purchasing view data and save. Material master created with only the Purchasing view.
    We want to control whereby Basic view must be created first before any plant/organisation material views (Sales, purchasing, Accouting etc) can be created. That means user cannot create Purchasing view ONLY if the Basic views is not created, can this be done??
    best regards,

    Hi,
        For most of the standard SAP material types the basic data 1 view is configured as mandatory, but that can be turned off in the configuration. The first place I would look would be in SPRO under 'Logistics - General -> Material Master -> Basic Settings -> Material Types -> Define Attributes of material types'. In this transaction, highlight the material type being used and click on the magnifying glass. The section 'User departments' shows what views can be created for a material. You need to check 'Basic Data' is selected here.
    If that isn't the problem, then I would suggest that you look at the screen sequence and also the field selection configuration for the material type, which you can find under 'Logistics - General -> Material Master -> Configuring the Material Master'. This configuration dictates what fields are shown on the material master and the status of each field, i.e. whether it is mandatory or not.

  • I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked.  What am I doing wrong?

    I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one. 
    On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
    What am I doing wrong?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
    If necessary:
    iOS: Device not recognized in iTunes for Windows
    or
    iOS: Device not recognized in iTunes for Mac OS X

  • I created a book and tried to place order but failed.  I followed the procedures, when the book completed uploading, the message "An error occured uploading your order" pop up.  There was no error message all along when I created the book.

    I created a book and tried to place order but failed.  I followed the procedures, when the book completed uploading, the message "An error occured uploading  your order" appeard.  There was no error message all along when I created the book. I tried several time but failed.

    preview the order and try again - http://support.apple.com/kb/HT1040
    If it still does not work boot into Safe Mode, preview again and try
    With the number of reports in the last few days it may be server overload - if so trying during a time of lower activity might help
    LN

  • When I tried to back up my computer, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old files, the folders are there, but NONE of the files are.

    I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
    Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photos

    So you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.

  • Error when I open the new help in FCP7

    I get a error when I open the new help in FCP7:
    The Help Library requires JavaScript.
    If JavaScript is not enabled, you will not
    be able to view all the content.

    I have checked that Javascript was enabled in Safari (and it is).
    I can read the documentation in Safari online using this link: http://documentation.apple.com/en/finalcutpro/usermanual/
    I have now tried all the new/updated programs in the FCS3 suite they all have the same problem:
    The Help Library requires JavaScript.
    If JavaScript is not enabled, you will not
    be able to view all the content.
    Mikael

Maybe you are looking for

  • Open link in new tab loads the new page and moves to the bottom

    I am using the latest update of Safari and had this happening in the previous version also. When I CMD+Click a link to load it in a new tab the new tab opens behind the active one (my choice of preferences) and when I click to make the new tab active

  • How do I view downloaded content when the error message, not a supported file type or because the file has been damaged, shows up?

    I trying to download a book as a pdf to view through my adobe reader. But every time I do I keep getting the same error message saying that the file is not a supported file type or because the file has been damaged it can't be opened or viewed. What

  • Mapping Org Chart to a specific role

    Hi All, I'm in the process in implementing NAKIZA V4.1 in my company but I'm facing difficulty in one of the requirements, I have two Org Charts configured, first one (main Org Chart) is displayed for all users which it's rooted by User ID, it's work

  • Updating checkboxes in an Access Database

    I have an edit form that requires checkboxes. I select a record to edit and check the checkboxes, enter the text data and submit the data. When I select the same record from the edit list I see where the text data is available in the form, but the ch

  • Will there be a 64 bit version in June 2011?

    There has been talk of a 64-bit version of Final Cut Pro out in June. Does that mean that FCE will also be 64-bit? Does this matter if Final Cut Pro is going to sell for only $300? I have not found anything in the news, just wondering if I have misse