Error when I try to reverse Financial transaction- TBB1/FTR_EDIT

Hi SAP Guru's,
When i try to Reverse a financial transaction using TBB1 or FTR_EDIT, system is issuing an error message -" TPM_TRAC1 113"- "You have no authorization to delete an account assignment ref. allocation"
I can't find any help on service sap for the error message.
Can some body tell what i have to do here.
Thanks
Bushan

Hi Bushan,
try to run /NSU53 in command line after you get the mentioned error message to see that kind of authorizations you are missing and provide this info to staff, responsible for authorizations.
Rgds,
Renatas

Similar Messages

When I try to do financial transactions I get a warning message "You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party." How much do I need to

When I try to process financial information such as log onto my banking account or my paypal account, or pay for something online I get a warning message "You have requested an encrypted page that contains some unencrypted information. Information that you see or enter on this page could easily be read by a third party." I also never get a padlock to show that I am on a secure site. How much do I need to worry or what should I do?
== URL of affected sites ==
http://

I would not trust that on a banking site. If it were just a forum, no problem, but anything unencrypted during banking is suspicious.

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders" -or- The icon in the dock bounces once, and nothing

Have uploaded and installed CC 2014. Several apps give this error when I try to start them: "Unable to launch Adobe InDesign as you do not have sufficient permissions to access the preferences folders"
-or-
The icon in the dock bounces once, and nothing happens.

Windows or Mac, and exactly which operating system version?

Error when I try to open Firefox. Says Firefox is running in the background and cannot open. Suggests closing that window or restart system. This has happened several times recently. I reinstalled but am still getting the error. Any thoughts?

I am getting an Error when I try to open Firefox that Says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system. This has happened several times recently. I deinstalld and reinstalled but am still getting the error. Any thoughts?

This happens to me as well. However, I have a shortcut on my desktop as well as my quick start bar. When this has happened to me, I can usually log back in without restarting, by using the shortcut on the desktop rather than the usual quick start bar.
I know this sounds weird, but it has worked for me about 80% of the time.

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

Error when I try to import db

I get the following error when I try to import a DB from my machine (9.2) to a 8.1.7.4 Unix (Sol 2.8) box. I can import locally on my 9.1 fine. Anyone hab=ve any ideas?
Thanks
Here is the message:
Import: Release 9.2.0.1.0 - Production on Wed Feb 5 07:46:50 2003
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
With the Partitioning option
JServer Release 8.1.7.4.0 - Production
IMP-00003: ORACLE error 942 encountered
ORA-00942: table or view does not exist
IMP-00023: Import views not installed, please notify your DBA
IMP-00000: Import terminated unsuccessfully

Hi,
Whenever you are exporting and importing database remember following rules;
1. The Import utility and the database to which data is being imported (the target database) must be the same version.
2. The version of the Export utility must be equal to the lowest version of the source or target database.
Good luck. :)
-San

I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)"....

I keep getting and error when I try to start my iTunes. "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, Then install iTunes again. Error 2(Windows error 2)".... I have uninstalled and reinstalled several times and the error still occurs!!! This started happening after I installed the 10.3 update

I took the time to research it and come across a couple of people who experienced the same trouble and so I listed some of there steps(with Credits) and some people said that they worked.
Here is the original Link:
https://discussions.apple.com/thread/2151777?start=0&tstart=0
OK, this worked for me:( Original Post by r0tt3n4pp13)
1. Save iTunes install file to your desktop.
2. Disconnect from internet.
3. Disable Firewall/Security software.
4. Run install. Note that it installs Application Support and a bunch of other software this time.
5. Run iTunes.
6. Enable Firewall/Security software.
7. Reconnect to internet.
8. Download Watchmen Director's Cut post haste.
OR!
(Original post by Cr4z33)
1. Download and install WinRAR.
2. Right-click the iTunesSetup.exe icon and choose "Open with WinRAR".
3. Once the EXE is opened in WinRAR, double-click AppleApplicationSupport.msi and when the installer window is open choose "Repair".
4. Done! You can now run iTunes normally.

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can

Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.

The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory.

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Why am I getting an ORA-04052 error when I try to compile a Procedure?

Hi,
The following procedure I'm getting an ORA-04052 error when I try to compile the following procedure.
CREATE OR REPLACE PROCEDURE APPS.Find_String (
pin_referenced_name IN dba_dependencies.referenced_name%TYPE)
IS
cursor cur_get_dependancy
is
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
 AND referenced_type <> 'SYNONYM'
 AND owner <> 'SYS'
order by name;
v_owner varchar2(40);
v_name varchar2(50);
v_type varchar2(40);
 BEGIN
 dbms_output.put_line(upper(pin_referenced_name)||' is found in the following objects.');
 dbms_output.put_line(' ');
 dbms_output.put_line(RPAD('OWNER', 30, ' ')||RPAD('NAME', 60, ' ')||RPAD('OBJECT TYPE', 30, ' '));
 dbms_output.put_line('-------------------------------------------------------------------------------------------------------------------');
 FOR i IN cur_get_dependancy
 LOOP
 v_owner := RPAD(i.owner, 30, ' ');
 v_name := RPAD(i.name, 45, ' ');
 v_type := RPAD(i.type, 30, ' ');
 dbms_output.put_line(v_owner ||v_name|| v_type);
 END LOOP;
END find_string;I'm using the link [email protected]. The procedure compiles for other database links used in the cursor including the one commented to the right of the code 'prod.world'.
What's even stranger is that I took the SELECT statement
SELECT distinct owner, name, type
FROM [email protected] -- prod.world
WHERE lower(referenced_name) = lower(pin_referenced_name) --'ftbv_salesrep_all_1d'
 AND referenced_type <> 'SYNONYM'
 AND owner <> 'SYS'
order by name;out of the procedure and ran it on the command line using the @pinp.world link, the SQL statement ran just fine. But when I tried to compile the above procedure with that exact same SQL statement with the exact same link I get the following string of errors.
ORA-04052: error occurred when looking up remote object [email protected]
ORA-00604: error occurred at recursive SQL level 1
ORA-02068: following severe error from PINP
ORA-03113: end-of-file on communication channelHow can the link work just fine in a regular SQL statement but then cause an error when its compiled in code that otherwise compile just fine when using any other link or even just a plain database. Does anyone have any suggestions?

OK Justin,
Here's the query by itself run in another database using the @pinp.world link and querying the dba_dependencies table in the pinp.world database. As you can see the query using this link works just fine returning the requested rows. I can't figure out why the compiler is having an issue with essentially this same query when I try to compile it in a cursor in TOAD. Also this is the database (dev1.world) that I'm trying to compile this Procedure in.
By the way I'm in an Oracle 9.2.0.6 database and TOAD v9.2.
SQL> conn apps/apps1@dev1
Connected.
SQL> SELECT distinct owner, name, type
2 FROM [email protected]
3 WHERE lower(referenced_name) = lower('ALL_USERS')
4 AND referenced_type <> 'SYNONYM'
5 AND owner <> 'SYS'
6 order by name;
OWNER NAME TYPE
PUBLIC ALL_USERS SYNONYM
XDB DBMS_XDBUTIL_INT PACKAGE BODY
XDB DBMS_XDBZ0 PACKAGE BODY
SYSTEM MVIEW_EVALUATIONS VIEW
SYSTEM MVIEW_EXCEPTIONS VIEW
SYSTEM MVIEW_FILTER VIEW
SYSTEM MVIEW_LOG VIEW
SYSTEM MVIEW_RECOMMENDATIONS VIEW
SYSTEM MVIEW_WORKLOAD VIEW
ORASSO WWCTX_API PACKAGE BODY
PORTAL WWCTX_API PACKAGE BODY
ORASSO WWEXP_UTL PACKAGE BODY
PORTAL WWEXP_UTL PACKAGE BODY
PORTAL WWPOB_API_PAGE PACKAGE BODY
PORTAL WWPOF PACKAGE BODY
ORASSO WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWPRO_PROVIDER_VALIDATION PACKAGE BODY
PORTAL WWSBR_EDIT_ATTRIBUTE PACKAGE BODY
PORTAL WWSBR_FOLDER_PORTLET PACKAGE BODY
PORTAL WWSBR_USER_PAGES_PORTLET PACKAGE BODY
ORASSO WWUTL_API_PARSE PACKAGE BODY
OWNER NAME TYPE
PORTAL WWUTL_API_PARSE PACKAGE BODY
PORTAL WWUTL_EXPORT_IMPORT_LOV PACKAGE BODY
ORASSO WWUTL_LOV PACKAGE BODY
PORTAL WWUTL_LOV PACKAGE BODY
PORTAL WWV_CONTEXT PACKAGE BODY
PORTAL WWV_CONTEXT_UTIL PACKAGE BODY
PORTAL WWV_DDL PACKAGE BODY
PORTAL WWV_GENERATE_UTL PACKAGE BODY
PORTAL WWV_GLOBAL PACKAGE
PORTAL WWV_MONITOR_DATABASE PACKAGE BODY
PORTAL WWV_PARSE_AS_SPECIFIC_USER PACKAGE BODY
PORTAL WWV_PARSE_AS_USER PACKAGE BODY
PORTAL WWV_SYS_DML PACKAGE BODY
PORTAL WWV_SYS_RENDER_HIERARCHY PACKAGE BODY
PORTAL WWV_THINGSAVE PACKAGE BODY
PORTAL WWV_UTIL PACKAGE BODY
PORTAL WWV_UTLVALID PACKAGE BODY
38 rows selected.
SQL>Let me know what you think.
Thanks again.

Get file not found error when I try to sync

I get file not found error when I try to sync Iphone.

SteveDVD,
The use of the .WMV was because that was part of the Library .EM template. I would not anticipate problems with other formats, so long as they are supported and the same for all of your Menus in the Project.
If you have done several Motion Menu Renderings, you might want to clear Encore's Media Cache, just in case it is still referencing previous Render files.
And yes, the re-Importation should yield the same result as Linking/re-Linking.
Unfortunately, I do not have CS4, so I can't test this for you. There do seem to be a few real Bugs in the various CS4 programs, and maybe this is one?
That "File Not Found" rings a bell in my feeble brain. Seems that there was a post on that, but I do not remember it being related to Motion Menus. Maybe search will yield something of use.
Good luck,
Hunt

Java error when I try to execute runInstaller

Hi all,
Someone can tell me why I get this error when I try to execute the runInstaller script ?
echoes:/temp/Disk1$ ./runInstaller
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2007-05-13_09-29-09PM. Please wait ...echoes:/temp/Disk1$ Oracle Universal Installer, Version 10.1.0.3.0 Production
Copyright (C) 1999, 2004, Oracle. All rights reserved.
Exception java.lang.UnsatisfiedLinkError: /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/libawt.jnilib: occurred..
java.lang.UnsatisfiedLinkError: /System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/libawt.jnilib:
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1751)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1668)
at java.lang.Runtime.loadLibrary0(Runtime.java:822)
at java.lang.System.loadLibrary(System.java:992)
at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(NativeLibLoader.java:38)
at sun.awt.DebugHelper.<clinit>(DebugHelper.java:29)
at java.awt.Component.<clinit>(Component.java:545)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
at oracle.sysman.oii.oiic.OiicInstaller.<init>(OiicInstaller.java:278)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:714)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
Exception in thread "main" java.lang.NoClassDefFoundError
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(OiifmGraphicInterfaceManager.java:189)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.createInterfaceManager(OiicSessionInterfaceManager.java:173)
at oracle.sysman.oii.oiic.OiicSessionInterfaceManager.getInterfaceManager(OiicSessionInterfaceManager.java:182)
at oracle.sysman.oii.oiif.oiifm.OiifmAlert.<clinit>(OiifmAlert.java:112)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:772)
at oracle.sysman.oii.oiic.OiicInstaller.main(OiicInstaller.java:628)
I'm trying to install the 10g db on a PowerMac G5 with 4 gig ram, OSX 10.4.9 with all the latest patches.
The oracle user shell config is the following :
=====================================
ORACLE_BASE=/opt/oracle
ORACLE_HOME=$ORACLE_BASE/product/10.1.0/db_1
ORACLE_SID=mydb
export ORACLE_BASE ORACLE_SID ORACLE_HOME
if [ $DYLD_LIBRARY_PATH ]
then
DYLD_LIBRARY_PATH=$DYLD_LIBRARY_PATH:$ORACLE_HOME/lib
else
DYLD_LIBRARY_PATH=$ORACLE_HOME/lib
fi
HTDOCS=/usr/local/htdocs
export DYLD_LIBRARY_PATH HTDOCS
PATH=/usr/local/bin:/usr/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin:$ORACLE_HOME/bin
export PATH
PS1='\h:\w\$ '
export PS1
alias l='ls -la'
alias svrmgrl='sqlplus /nolog'
================================
Thanks in advance,
Max

Is the Oracle runInstaller message telling me that it wants IBMJava2 -1.3.1, even though is says to install 1.3.1 or higher?Yeah, it has been known to act a bit funny on newer releases of JRE.
~Jer

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

WHEN TRYING TO DOWNLOAD THE LATEST VERSION OF ITUNES, I KEEP GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.dll was not found

AFTER DOWNLOADING THE LATEST VERSION OF ITUNES, I CAM GETTING AN ERROR WHEN I TRY TO OPEN IT. MSVCR80.DLL WAS NOT FOUND. UNABLE TO LOCATE COMPONENT. BEFORE I REMOVE THIS VERSION AND TRY TO RELOAD AGAIN, JUST WANTED TO BE SURE I WOULDN'T LOSE ALL 200 PURCHASED SONGS ON MY PC.

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99220)

Apple ID couldn't be created because of a server error when i try to restore from a backup

Apple ID couldn't be created because of a server error when i try to restore from a backup from iCloud?
Also my mail works fine, and if i bypass everything and sign in tomy apple id in settings it will work!

I don't know, but it's not working for me.
I went to Apple ID website and everything is fine there, But I can't restore my phone from iCloud.

Error when I try to reverse Financial transaction- TBB1/FTR_EDIT

Similar Messages

Maybe you are looking for