"error when importing object" when selecting variant

Hello,
we recently migrated from 4.6 to 4.7.
For some programs, when selecting a variant, this gives a runtime error, like
Error when importing object "C131A2"
What is the cause of this? Because the values in the variant aren't valid anymore?
How can this be solved?
Thanks in advance for the help

Glad to help - you'll likely have to run it after every upgrade (for different reports).
Rob

Similar Messages

Error when importing object P_lis

Hello Experts ,
I have a task assigned to me where i have to write a program to get all the reports and their variants( variants without space and non obselete variants)
When i am trying to access the variant SDCAS_ADRSEL , I am getting a dump "Error when importing object P_lis ". It has got only one variant JOJO1 in the vari table . Please help me out with this.

Hi Aditya,
You might need to provide a few more details on the dump.
I.e.
Exact details of the error that occured.
Where the error occurred
You can grab these out of the dump in ST22. That should help people out, to help understand what you are doing, as it's not really clear from your current description.
Cheers,
Katan

Error "Invalid Report Object" when running any CR

Hi, I have installed BO XI V3.1 and upgraded to 1.4 level.
However when logged into the infoview app, if i browse to any 2008 report i have uploaded into the enterprise system and double click to run i get the error "Invalid Report Object".
This is also true if i try to run any report in the Public Folders \ Report Samples folder.
Nothing will display for me but they run fine in CR 2008, just not via the web tool.
Any help on this will be much appreciated.
C.

Hi,
Is this issue after you have upgraded to 1.4 or was this issue occurring before?
Since the reports are running properly in the designer please try to do following steps:-
1) Open the report in the designer which is not working in enterprise
2) Refresh the report in CR designer
3) Save the report back to the enterprise and make sure save with data is checked.
4) Now open the report in the Enterprise and check it works or not.
The reason of doing this is that to generate new PID's for the reports if after the upgrade the PID's have changed or has became corrupt.

Does AAC Encoder apply when importing or when transfering to iPod?

I have iTunes set to import using AAC Encoder. CD songs in the iTunes libary on my PC are m4a fles, while downloaded mp3 files remain as mp3 files.
Are the mp3 songs converted to AAC when transferred onto my iPod? Or does the AAC Encoder only apply when importing into the libary on my PC, in which case why do mp3 files stay as mp3 files?
Reason for asking is concern that converting from mp3 to AAC reduces sound quality.
iPod Other OS 60GB Video

Graham,
The import setting you select in your iTunes Preferences applies specifically to songs you add directly from a CD.
It does not affect songs that are added to your library that are already mp3's (or any other format for that matter).
Have a look at: http://docs.info.apple.com/article.html?artnum=301509
When you synch the files to your iPod they will remain whatever they are in iTunes - nothing changes in the transfer.
iTunes can convert files (see http://docs.info.apple.com/article.html?artnum=93123 if you're interested in details on that) but you are right, there is a loss of audio fidelity.

Photos copies photos when importing even when told not to copy photos when importing?

The new Photos app is pretty cool.
The one thing I didn't like about iPhotos is still present here: Rather than handling my photos in the Finder it creates a weird database full of all the photos -- and the only way to get to them is via this one app. I guess maybe we'll have a solution for that in the future.
But I have stumbled across something that may be a deal breaker for me: Even when set to not COPY imported photos, it turns out the Photos copies imported photos.
In preferences: GENERAL -> IMPORTING you can choose whether to Copy Items To The Photo Library.
Well, I don't want to do that. I have 8G of photos on my drive, and relatively little space, and the last thing I need to do is use double the space! So I chose not to copy items when importing.
I come back a couple hours later. And guess what? My Photos app/library is 8G in size! Photos has copied all my photos when importing. So now I have two copies of all my photos on my hard drive, and I am running out of space.
Is there a way to make that setting, to not copy photos when importing, work?

Hi,
Thanks for the idea. Here is what I found:
The "Masters" folder is very small. 300MB.
The "Previews" folder is a similar size.
"Thumbnails" are under 1G.
It's the "Resources" folder that is many gigs in size.
Very interesting. So in a sense, it could be even worse!
That is, apparently the setting prevented the "Masters" folder from getting 8 gig of photos copied into it.
But even so, "Resources" ended up with 6.5G in it -- even though no files were copied!
Wild.
Other photo management apps (e.g., Lightroom) have sort of a 10% overhead, not a 90% overhead -- i.e., close to the same size as the actual photos themselves.
I should probably start a fresh question, now that you have solved half the mystery: Yes, the actual photos were not imported into Masters, but Resources gets really big!

Got error while importing objects

Hi,
I got error with return code 8 while importing objects.
Actually, i created Multiprovider and Two queries on that and transported those objects in the same request and released in SE09 and while importing these objects I got error with Return Code 8.
Pls Help me, what i should do now.
Thanks&Regards,
Rafi

Hi Mohd.
Return code 8 is an error which indicates that some objects are missing. You will have to include these missing objects before you can create the transport successfully. In your scenario it might be a structure, CKF, RKF, missing info providers etc.
Hope it helps.
BR
Stefan

Error MEQ006 - no user specific selection variant found in VL31N

Dear gurus,
in VL31N I get an error message MEQ006 - no variant found. Where from system takes user specific selection variant in tx VL31N?
P.

Hi Pavel,
Check this Note 305541 - VL31N: load selection variant automatically
Regards,
Pavan

Error when importing object "MC11VA0ITM_TAB".

Hi SDN,
Error in ABAP application program.
The current ABAP program "SAPLMCEX" had to be terminated because one of the statements could not be executed.
This is probably due to an error in the ABAP program. When attempting to import data, the structure of the complex object "MC11VA0ITM_TAB" was not compatible with thetarget object.
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_IMPORT_MISMATCH_ERROR',
was neither
caught nor passed along using a RAISING clause, in the procedure
"MCEX_BW_LO_API" "(FUNCTION)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to import data, the structure of the complex object
"MC11VA0ITM_TAB"
was not compatible with the target object. The error occurred with
component no. 522.
any inputs ...
Regards,

Hello Shiva,
It sounds like there was a change made to the extract structure while there was still data in SM13 or RSA7 or the setup tables.
This situation is described in SAP note 328181.
The solution is usually to delete the data in the setup tables and reinitialise the datasource again.
Best Regards,
Vincent

Problem when importing objects from SLD to IR

Hi
When i try to import any object from SLD into
IR i cant view all the components under Data Types Message Types Interface Mapping and other related nodes.Just the object gets imporetd but none of ts nodes are visible.
Please let me know if any change in configuration or settings is to be done.
Thanks in Advance

>>Could you pls tell me the link in service.sap.com
https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
search SAP basis 6.40
Regards,
Jai Shankar

Have Image Restore only when another object is selected

I have a menu of images at the top. When the mouse rolls over
them a new layer appears on the page according to which logo was
rolled over. When the mouse rolls over the image(s) i want Two
things to happen 1) Image changes from gray scale to color (easy,
rollover image) but 2) I want the image to remain color even when
the mouse is not over it and only change back to gray scale when
another image at the top is rolled over. Currently the image will
only stay color when the mouse is over it. I need the corresponding
image to remain in color when its layer is in view. I have thought
of a few ways to do this with putting each image in a layer but i
want an easier way. Any suggestions? Thanks in advance!

Is this possible? Am I clear on what i want?

Error in Importing Objects

Hi,
I am following the below weblog for transporting XI objects:
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
We are able to export the CIM file, while importing it in the target SLD, it is showing
"The target namespace for the special import already contains data for one or more export lines. Continuing this import may corrupt the state of your data."
when i hit on "anyway import" it is showing "
"Import finished with 8 errors: 9 of 17 objects loaded (Details)". when i hit on details
Import finished with 8 errors: 9 of 17 objects loaded
The Errors:
CIM_ERR_FAILED: SAP_BusinessSystem.CreationClassName="SAP_BusinessSystem",Name="DXI" referenced by association SAP_BusinessSystemExchangeServer.Antecedent=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_DXI_JAVA\"",Dependent=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"DXI\"" does not exist.
SAP_BusinessSystemExchangeServer.Antecedent=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_DXI_JAVA\"",Dependent=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"DXI\""
CIM_ERR_FAILED: SAP_BCClient.CreationClassName="SAP_BCClient",Name="120.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2" referenced by association SAP_BusinessSystemViewedBCClient.SameElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_120\"",SystemElement=ref"SAP_BCClient.CreationClassName=\"SAP_BCClient\",Name=\"120.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\"" does not exist.
SAP_BusinessSystemViewedBCClient.SameElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_120\"",SystemElement=ref"SAP_BCClient.CreationClassName=\"SAP_BCClient\",Name=\"120.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\""
CIM_ERR_FAILED: SAP_BCClient.CreationClassName="SAP_BCClient",Name="110.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2" referenced by association SAP_BusinessSystemViewedBCClient.SameElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_110\"",SystemElement=ref"SAP_BCClient.CreationClassName=\"SAP_BCClient\",Name=\"110.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\"" does not exist.
SAP_BusinessSystemViewedBCClient.SameElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_110\"",SystemElement=ref"SAP_BCClient.CreationClassName=\"SAP_BCClient\",Name=\"110.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\""
CIM_ERR_FAILED: SAP_J2EEEngineCluster.CreationClassName="SAP_J2EEEngineCluster",Name="DXI.SystemHome.sapxidev" referenced by association SAP_BusinessSystemViewedJ2EEEngineCluster.SameElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_DXI_JAVA\"",SystemElement=ref"SAP_J2EEEngineCluster.CreationClassName=\"SAP_J2EEEngineCluster\",Name=\"DXI.SystemHome.sapxidev\"" does not exist.
SAP_BusinessSystemViewedJ2EEEngineCluster.SameElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_DXI_JAVA\"",SystemElement=ref"SAP_J2EEEngineCluster.CreationClassName=\"SAP_J2EEEngineCluster\",Name=\"DXI.SystemHome.sapxidev\""
CIM_ERR_FAILED: SAP_InstalledProduct.CollectionID="54a3cc70-223a-11db-a3df-f24b96623c12",ProductIdentifyingNumber="0",ProductName="NEOPOST_INTERFACES",ProductVendor="NEOPOST_INTERFACES",ProductVersion="1.0",SystemID="R3D.SystemNumber.0020212393.SystemHome.sapdev2" referenced by association SAP_InstalledProductLogicalApplicationSystem.Product=ref"SAP_InstalledProduct.CollectionID=\"54a3cc70-223a-11db-a3df-f24b96623c12\",ProductIdentifyingNumber=\"0\",ProductName=\"NEOPOST_INTERFACES\",ProductVendor=\"NEOPOST_INTERFACES\",ProductVersion=\"1.0\",SystemID=\"R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",System=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_110\"" does not exist.
SAP_InstalledProductLogicalApplicationSystem.Product=ref"SAP_InstalledProduct.CollectionID=\"54a3cc70-223a-11db-a3df-f24b96623c12\",ProductIdentifyingNumber=\"0\",ProductName=\"NEOPOST_INTERFACES\",ProductVendor=\"NEOPOST_INTERFACES\",ProductVersion=\"1.0\",SystemID=\"R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",System=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_110\""
CIM_ERR_FAILED: SAP_InstalledProduct.CollectionID="54a3cc70-223a-11db-a3df-f24b96623c12",ProductIdentifyingNumber="0",ProductName="NEOPOST_INTERFACES",ProductVendor="NEOPOST_INTERFACES",ProductVersion="1.0",SystemID="R3D.SystemNumber.0020212393.SystemHome.sapdev2" referenced by association SAP_InstalledProductLogicalApplicationSystem.Product=ref"SAP_InstalledProduct.CollectionID=\"54a3cc70-223a-11db-a3df-f24b96623c12\",ProductIdentifyingNumber=\"0\",ProductName=\"NEOPOST_INTERFACES\",ProductVendor=\"NEOPOST_INTERFACES\",ProductVersion=\"1.0\",SystemID=\"R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",System=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_120\"" does not exist.
SAP_InstalledProductLogicalApplicationSystem.Product=ref"SAP_InstalledProduct.CollectionID=\"54a3cc70-223a-11db-a3df-f24b96623c12\",ProductIdentifyingNumber=\"0\",ProductName=\"NEOPOST_INTERFACES\",ProductVendor=\"NEOPOST_INTERFACES\",ProductVersion=\"1.0\",SystemID=\"R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",System=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_120\""
CIM_ERR_FAILED: SAP_LogicalALESystem.CreationClassName="SAP_LogicalALESystem",Name="110.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2" referenced by association SAP_ALESystemViewedBusinessSystem.SameElement=ref"SAP_LogicalALESystem.CreationClassName=\"SAP_LogicalALESystem\",Name=\"110.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",SystemElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_110\"" does not exist.
SAP_ALESystemViewedBusinessSystem.SameElement=ref"SAP_LogicalALESystem.CreationClassName=\"SAP_LogicalALESystem\",Name=\"110.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",SystemElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_110\""
CIM_ERR_FAILED: SAP_LogicalALESystem.CreationClassName="SAP_LogicalALESystem",Name="120.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2" referenced by association SAP_ALESystemViewedBusinessSystem.SameElement=ref"SAP_LogicalALESystem.CreationClassName=\"SAP_LogicalALESystem\",Name=\"120.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",SystemElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_120\"" does not exist.
SAP_ALESystemViewedBusinessSystem.SameElement=ref"SAP_LogicalALESystem.CreationClassName=\"SAP_LogicalALESystem\",Name=\"120.SystemName.R3D.SystemNumber.0020212393.SystemHome.sapdev2\"",SystemElement=ref"SAP_BusinessSystem.CreationClassName=\"SAP_BusinessSystem\",Name=\"BS_R3D_120\""
did anybody come accrossed this problem? what could be the error? and also tell me how to undo this in target system?
regards

Hi Osman,
All my RFCs are working fine whether it be from the DEV system to QTY or vice versa.
Is there anything else we could check?
PFA the screenshot for your reference.
Another confusion is when try to import lat time, in log its showing error occurred for ID object,here is the screen shot,
Is there any prerequisite to transport ID object to QTY environment or any dependencies?
Regards,
Arthita

Error in importing objects in STMS_IMPORT

Hi Experts,
Urgent!!
I have exported IR & ID objects under one TR (using CTS organizer) from DEV environment. While importing by using STMS_IMPORT in PI QTY system I got the following error.
RFC communications error with system/destination
%%ashost=BLPIQTY,sysnr=,lang=E,client=220,pcs=2,ic
RFC destination
%%ashost=BLPIQTY,sysnr=,lang=E,client=220,pcs=2,icce=1,cf
it=0x20 does not exist.
Please suggest some way out !!
Thanks,
Arthita

Hi Osman,
All my RFCs are working fine whether it be from the DEV system to QTY or vice versa.
Is there anything else we could check?
PFA the screenshot for your reference.
Another confusion is when try to import lat time, in log its showing error occurred for ID object,here is the screen shot,
Is there any prerequisite to transport ID object to QTY environment or any dependencies?
Regards,
Arthita

REG: Error while importing objects in SLD

Hi All,
            While importing SLD objects from Development to Production I am facing following problem
             The selected import requires model version 1.6.16 or higher. The model version of target namespace sld/active is outdated and must be updated to the required version before this import can be performed
             The error is due to different Model versions of SLD. Development is pointing 1.6.16 where as Production is pointing to 1.5.42.
        How do I upgrade my production SLD Model version to 1.6.16 ?
Thanks,
Siva

You need to download the modal content from SAP marketplace and apply it. Usually basis team is responsible for this.
VJ

Error while import objects:view or table

Action: Right click on views under the module tree. select import menu. select view checkbox. Click on view (trying to import view)
API2206:Connection to source failed.
ORA-02019:Connection descriptor for remote database not found.
The error is so obvious, but I can not figured out what's run on my setup. Can anyone help? Did I miss anything else? Thanks.
This project runs OK in owb 9i. I imported the mdl to owb client 10g.
Create location, connector, deploy and register to runtime on 10g instance OK. Create a runtime and connection through deployment manager is OK.
Property of this module is updated with the new location.Source for metadata import is through dictionary.

Hi,
Do you know what's the "connection descriptor" the error msg is referring to? I thought it may be the connector. But it's set OK.
Under the "connection" tab from the module property, I check the first checkbox, Oracle Data Dictionary, for Source for Metadata Import. It's working OK before.
Thanks.

The Control Panel (top bar) no longer shows the location or size of an object when I select an object using the black arrow.

I'm only able to see/adjust the location or size of the object by opening the Transform panel.
This is what I used to see:
Now my Control panel looks like this where the above information used to be when an object was selected using the black arrow:

tracyelaine,
It may be time for the list (you may skip 5) in this case).
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

"error when importing object" when selecting variant

Similar Messages

Maybe you are looking for