Error when incident is recorded "Exception Occured"
Hi All,
We are using NetWeaver Business client(NWBC) for SAP EHS 2.0.
Getting an error after when incident is submitted to report Managers. Incident get recording with out any issue but displaying an error "Exception Occured".
Please advice.
I was using Report Incident simplified to record an incident.
Thanks,
Quantum.
Hi Naveen,
First check the connection to ADS. You can use the program FP_PDF_TEST_00 to do this. The program FP_CHECK_DESTINATION_SERVICE must also run successfully (both with and without the checkbox selected on the selection screen). If this program does not run successfully, there is a error in the configuration.
Use SE38 Tcode. if you don't have access, ask your ABAP & Basis team execute this process.
Test for FP_PDF_TEST_00 program.
Now, your ADS connection is working fine.we will move to next test.
You need to check your service is activated or not.
Test 2 for FP_CHECK_DESTINATION_SERVICE. Run below mention steps with help of SE38 T-code.
Execute this process.If this program does not run successfully, there is a error in the configuration.you seed to activate ADS Service. The both program is ruining successfully the exception error will not occur.
Check and update us
Edward
Similar Messages
-
Hi,
I have problem when install Adobe Pr Pro CS6 with DeckLink HD Extreme 3D
My workstation have configuration as following:
Supermicro workstation
Super Micro x8DAL-i
Intel Xeon E5645 2.40Ghz
4GB DDR3-RAM x 2
NVIDIA Quadro 2000 1GB Graphics
250GB SATA 7200 RPM
2TB 7200 RPM SATA x 2
DVDRW
Window 7 Pro 64bit
I can capture with Media Express but when I try to capture from CS6 with Decklink HD Extreme 3D, the Error message: “A low-level exception occurred in: Blackmagic Design (recorder) “
Any one can help me urgent please
Thank you,
DragonhnI have seen an issue with the latest Blackmagic driver and capturing with the current version of Premiere. I would use Media Express to capture and then just import the files.
Eric
ADK -
Short dump error when extracting delta records from R/3
I am working on BW 3.5 and I am facing some short dump error when extracting delta records from the r/3 to BW.
Below is the error message
Kindly do the needful ASAP.
Job started
Step 001 started (program SBIE0001, variant &0000000024277, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0ISCM_PAYMENT_01
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000000000 *
abap/heap_area_total.......... 2000000000 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500000 *
ztta/roll_extension........... 2000000000 *
2,454 LUWs confirmed and 2,454 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DAT
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelledHi,
I look at the transaction ST22 to see which type of error has given you. Take a look at the notes to correct the error.
Another option is to look at OSS notes, because the error is giving you a standard extractor.
Greetings, -
Error when starting JRA recording
Hello! I get an error when I try to use the JRARecordingStarter.
I'm running JBoss with a JRockit and set the -Xmanagement option. The management port is set to 7091.
Then I try
java -jar JraRecordingStarter.jar localhost 7091 d:/sednajra.xml 120
and it gives me the following error after a while:
Failed to start recording...
com.jrockit.common.rmp.JRockitNotAnRmpServerException: Handshaking with JRockit failed due to timeout waiting on server reply.
(Encapsulated exception: Connection lost to JRockit. Reason: RMP reply timed out for packet 'HELO'.)
at com.jrockit.console.connection.RmpConnection.handshake(RmpConnection.java:175)
at com.jrockit.console.connection.RmpConnection.<init>(RmpConnection.java:149)
at com.jrockit.jra.starter.JraConnectorModel.connect(JraConnectorModel.java:168)
at com.jrockit.jra.starter.JraRecordingStarter.main(JraRecordingStarter.java:63)
=== Encapsulated exception ===
com.jrockit.common.rmp.JRockitRmpPacketTimeOutException: Connection lost to JRockit. Reason: RMP reply timed out for packet 'HELO'.
at com.jrockit.console.connection.RmpConnection.getReplyPacket(RmpConnection.java:392)
at com.jrockit.console.connection.RmpConnection.sendRmpWithReply(RmpConnection.java:343)
at com.jrockit.console.connection.RmpConnection.handshake(RmpConnection.java:165)
at com.jrockit.console.connection.RmpConnection.<init>(RmpConnection.java:149)
at com.jrockit.jra.starter.JraConnectorModel.connect(JraConnectorModel.java:168)
at com.jrockit.jra.starter.JraRecordingStarter.main(JraRecordingStarter.java:63)
Do I make a mistake here?
Thanks!
stephanDon't bother... Version conflict. Updated jrockit and it works now.
-
Runtime Error when activating Comp Records
When trying to activate IT 0759 records in Comp to update Basic Pay, some employees received a Runtime Error. It states, "The exception CX_HRPA_VIOLATED_POSTCONDITION was raised, but it was not caught anywhere along the call hierarchy."
It says it was not caught in 'HR_ECM_INSERT_INFOTYPE' function.
Has anyone else seen this problem? It didn't happen for all employees.
Thanks!Hi guys,
Another reason for locked SPO's is:
The terrible attribute-change-run (ACR). When you try to activate a locked SPO, you only get a message like this:
Runtime Lock: Activity ACTIVATE_SPO, Object DATATARGET ZZZ
Unable to lock the semantically partitioned object
Error when activating Semantically Partitioned Object ZZZ
NO DTP request is running, so you can take all the day trying to find the error.
So in my case, there was an incomplete ACR (cancelled with error - red).
It's like a curse. It is not easy to find the relation between ACR an SPO activation process (SAP error message is not useful to identify the reason)
Finally, keep in mind:
Check any DTP request running or cancelled that affect your SPO model and
Check if you have an ACR (running or cancelled). This can lock your SPO object
regards! -
Error Msg -A Low-level exception occurred in: Adobe Player
I have CS6 installed, all the latest patches, etc. It's been working fine for months.In the last week Pr is unable to playback all of my footage (Native 5D mark III h.246 and Canon xf305 footage). Whether it is on the timeline or in the source panel.
The Error message i get it this: A Low-level exception occurred in: Adobe Player (player).
Using Adobe CS 6.0.3
Windows 64 Bit 8 GBs RAM
Happens in new projects and old.
New timelines also affected, it appears.
Was not happening as recently as two days ago.
No changes made to the computer.
Only changes is that I have combined timeines (Imported) from one project to another.
Video shows yellow or Green.
I have rerendered the footage to show all green on timeline.
Only way around it is to reboot the computer, it comes back after a while. The problematic timelines work fine for a while, then this starts happening.
I deleted the media cache database folder after exiting Pr.
Didn't seem to change anything. I just got the error again. Things seem to be curiously messed up. I tried to render a sequence out to MXF. The headless crashed each time, (not totally unusual, but it couldn't complete even once). I also got an error message when I bypassed the Media Encoder and just went strait to rendering it out within Pro. It managed to continue to render it to MXF but when I got done and imported it into Pro, it didn't play the clip when I clicked on it.
The interesting thing to me is that to totally clear Adobe from RAM, I have to go into Task Manager and kill the process after exiting the program (in lieu of rebooting). So it's not closing properly, it appears. Once I kill the process and reopen the app, I can then play the sequence, for a while. It's very curious. Task manager also shows lots of RAM open, no memory leaks at work, nothing unusual. It appears, to be just choking on footage, sort of like it can't quite process the audio (like when you bring in new footage and it has to process that audio). What's happening is like it sees the audio at first when I bring it in at startup of the app, then loses it. If I exit without killing the Premiere process (or shutting down the machine), then it still exhibets the behavior on startup again.
So this project is large, for me. It is showing as 34 MBs. I have a wide variety of clips at play here, but only MXF Canon from the xf305 and MOV from the Canon 5D. The MXF are the default sequence(s) unless I shot nothing but MOV.
I have tried rendering the visualization, all green lines on top but that doesn't seem to fully help. It does play the footage for a while.
There are no special effects added, yet.
Is it worth re-installing Premiere? This has cost me the better part of a day screwing around with this.
Let me detail this again:
Premiere is installed on C There hundreds of GBs of storage avaialble there.
All project files are on F which is a RAID 1 array. It appears to be functioning normally. 800 GBs free space on 2TBs.
All Renders are taking out to an external drive like I always do. Lot s of space available there too.
Anyone have an idea how to fix this?Is this any better? Cut and pasted plain text.
I have CS6 installed, all the latest patches, etc. It's been working fine for months.In the last week Pr is unable to playback all of my footage (Native 5D mark III h.246 and Canon xf305 footage). Whether it is on the timeline or in the source panel.
the Error message i get it this: A Low-level exception occurred in: Adobe Player (player).
Using Adobe CS 6.0.3
Windows 64 Bit 8 GBs RAM
Happens in new projects and old.
New timelines also affected, it appears.
Was not happening as recently as two days ago.
No changes made to the computer.
Only changes is that I have combined timeines (Imported) from one project to another.
Video shows yellow or Green.
I have rerendered the footage to show all green on timeline.
Only way around it is to reboot the computer, it comes back after a while. The problematic timelines work fine for a while, then this starts happening.
I deleted the media cache database folder after exiting Pr.
Didn't seem to change anything. I just got the error again. Things seem to be curiously messed up. I tried to render a sequence out to MXF. The headless crashed each time, (not totally unusual, but it couldn't complete even once). I also got an error message when I bypassed the Media Encoder and just went strait to rendering it out within Pro. It managed to continue to render it to MXF but when I got done and imported it into Pro, it didn't play the clip when I clicked on it.
The interesting thing to me is that to totally clear Adobe from RAM, I have to go into Task Manager and kill the process after exiting the program (in lieu of rebooting). So it's not closing properly, it appears. Once I kill the process and reopen the app, I can then play the sequence, for a while. It's very curious. Task manager also shows lots of RAM open, no memory leaks at work, nothing unusual. It appears, to be just choking on footage, sort of like it can't quite process the audio (like when you bring in new footage and it has to process that audio). What's happening is like it sees the audio at first when I bring it in at startup of the app, then loses it. If I exit without killing the Premiere process (or shutting down the machine), then it still exhibets the behavior on startup again.
So this project is large, for me. It is showing as 34 MBs. I have a wide variety of clips at play here, but only MXF Canon from the xf305 and MOV from the Canon 5D. The MXF are the default sequence(s) unless I shot nothing but MOV.
I have tried rendering the visualization, all green lines on top but that doesn't seem to fully help. It does play the footage for a while.
There are no special effects added, yet.
Is it worth re-installing Premiere? This has cost me the better part of a day screwing around with this.
Let me detail this again:
Premiere is installed on C There hundreds of GBs of storage avaialble there.
All project files are on F which is a RAID 1 array. It appears to be functioning normally. 800 GBs free space on 2TBs.
All Renders are taking out to an external drive like I always do. Lot s of space available there too.
Anyone have an idea how to fix this? -
Error when deleting a record: "FRM-40202 Field must be entered"
Dear all, please I need your help in this little problem.
I am using Forms 10g , and I am having an issue when deleting a record at runtime. It is giving "FRM-40202 Field must be entered".
I have reviewed the code but still cannot guess what could be the reason.
Any idea please. Thanks
Edited by: user562674 on 02/05/2011 12:35 صHi
This error is caused due to the NOT NULL constraint u have in ur db for that item...
u have 2 options to use ...
1.Either u set the Required property of that item to > no
2.Or u give it an intial value...
To get ride of this error message...
Hope this helps...
Regards,
Ammatu Allah. -
Error when uploading par files - Exception
Hi all,
I'm getting an error when I try to upload any par file of the MSS package through the administration console. The error thrown is:
Messages:
INFO: Detected Portal Archive File: com.sap.pct.hcm.attendanceoverview.par
INFO: Application successfully stored in the PCD
Messages from Server ID 8657950
ERROR: Operation failed: The archive com.sap.pct.hcm.attendanceoverview has not been deployed.
ERROR: Exception caught: com.sapportals.portal.prt.runtime.PortalRuntimeException: [PortalApplicationItem.prepare]: com.sap.pct.hcm.attendanceoverview
The error is displayed in the administration console. The logs don't say anything useful. I'm getting a few exceptions about finding archives and this error message: get data source CVERS failed! Trying SAP/BC_UME...
I have checked the rights to all directories and the directory structure. We're running EP6.0 with SP 9.
Thanks for your time.
regards,
DionHi Dion,
i would think that SAP tries to stop uploads of par files which should be installed with them SDM or import of a whole package.
Try the following :
- rename the par file name from com.sap.... to something else...
or :
- import the par into Developer Studio and change the project name
change/delete the META-INF files
Another question : why do you want to install only certain elements of the MSS package ?
Regards,
Kai -
Throwing error when Creating Info record
Hai,
When Creating Info record . I maintained standard Qty, Min qty ,price and Planned dely time .
It is not saving and there is an error message that "Maintian all entries in Reqt fields" and Cursor is blinking at Planned delytime . and Not saved/
Can any one solve my issue.
regards
MadhavHi madav ,
create inforecord me11
vender name
mat
purchase org
plant
maintain that and enter,
go to text maintain, then click on condition hear maintain as per as the requirement,
go back
click on purchase organization data then save
u will not get error .
hope it will help u .
thanks
BIswa -
Help: Error when using LSMW (Recording Object Type)
Dear all,
I encountered an error when using "Batch Input Recording" way in LSMW,which is as follows:
I have recorded the transaction MM01 and the source structure and data mapping.When dealing
with "Specify Files",the error comes out with message
--> "File Name 'Converted Data':Max.45 Characters:Remaining saved".
and the subsequent steps cannot be maintained due to the error.Alex,
The name of file for Converted data is a system generated combination of your Project subproject and object followed by lsmw.conv as Project_Subproject_Object.lsmw.conv
System has set a limit of a maximum of 45 characters. It the file name exceeds 45 characters, the system will throw the error.
Just rename the file such that it is with in the 45 charcter limit....you will be fine
Hope this helps
Vinodh Balakrishnan -
ECC 6.0 , Java error when we click "Record Expense Receipts" on first page
Hi ,
We update from ECC5.0 to ECC6.0 , we can fill the first page of the T&E "Create Expense Report" when we click "Record Expense Receipts" the following Java error is displayed ?
Maybe somedody ran into the same issues . Thank you, any information will help .
at com.sap.mw.jco.JCO$Record.getInt(JCO.java:13095)
at com.sap.aii.proxy.framework.core.JcoBaseTypeData.getElementValueAsBoolean(JcoBaseTypeData.java:599)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClass.getAttributeValueAsBoolean(DynamicRFCModelClass.java:287)
at com.sap.xss.tra.model.common.Ptrm_Web_Customizing_Get_Output.getE_Jurcodes_External(Ptrm_Web_Customizing_Get_Output.java:2219)
at com.sap.xss.tra.fc.customizing.wdp.IPublicFcTraCustomizing$ICustomizingGet_OutputElement.wdGetBoolean(IPublicFcTraCustomizing.java:5677)Hello,
Please refer to the note "1076144 ESS trips and expenses: Migration from WD Java to WD ABAP" to check your setting.
Regards,
Raynard -
Hi,
Im using SAP B1 2007A SP00 PL11
I'm getting the following error when attempting to add data using a custom form bound to a UDO.
"Internal Error (3621) occured [Message 131-183]"
The form was generated using the B1DE form generator and is a Document / Document Lines type form.
The error is caused by a specific value in one of the fields in the Document Lines section. If I use another value it works correctly.
Any info on what error 3621 is would be appreciated.
Cheers,
BenBen,
The latest patch level for 2007A is PL 15 ... you may want to download and retry your code.
Eddy -
Simplescreenrecorder - error when trying to record to gif
I'm trying to record an area of my screen to gif.
Here is the error I get when I press "Start recording":
[PageRecord::StartOutput] Starting output ...
[Muxer::Init] Using format gif (GIF Animation).
[BaseEncoder::CreateCodec] Using codec libx264 (libx264 H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10).
[Muxer::Start] Error: Can't write header!
[BaseEncoder::EncoderThread] Encoder thread started.
[BaseEncoder::Stop] Stopping encoder thread ...
[BaseEncoder::EncoderThread] Encoder thread stopped.
[PageRecord::StartOutput] Error: Something went wrong during initialization.
Container: other...
Container name: gif
Codec: H.264 (I tried all codecs with default values).
I did try x11grab, but I find it inconvenient to have to write down the mouse coordinates: I am unlikely to know exactly which values I want.Hi H.Barker,
Zou is correct, LabVIEW supports all GIF bit depth images 24bit and below.
Thank you for forwarding the GIF images, I also experienced the same error when trying to import the "logo.gif" image in LabVIEW however I was able to import the image when I opened it in Microsoft Paint and resaved it as a new GIF.
This suggests there is a corruption in the original GIF file generated on the web, for example a "terminiating block" may be missing at the end of the GIF file. LabVIEW is not forgiving of GIF images that do not meet the GIF specification whereas other Windows editors may be, it seems that opening and resaving the GIF file in Microsoft Paint added the missing characters thus allowing for the file to be imported into LabVIEW.
I have attached the working GIF image to this post.
Hopefully this assists with your application H.Barker.
Many Thanks
Jamie S.
Applications Engineer
National Instruments
Attachments:
LOGO GIF (2).gif 34 KB -
MYSQL Error When Deleting multiple records
Folks,
I am finally converting my website from MS-Access to MySQL and until Monday I was having pretty good luck. However, I have come across a issue I cannot find any solution to and am wondering if one of you can assist.
When I try to delete a number of records using tgeh same commands that worked in Access, I get this error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e21'
ODBC driver does not support the requested properties.
/New_Site/Trade/Trade_Signup_Edit_Update.asp, line 34
This is the code:
Set adoCon2 = Server.CreateObject("ADODB.Connection") adoCon2.Open "DRIVER={MySQL ODBC 3.51 Driver}; SERVER=MySQLB1.webcontrolcenter.com;" &_ "DATABASE=pinotdays; UID=pinotdays; PASSWORD=********; OPTION=3" Set rsTrade_List = Server.CreateObject("ADODB.Recordset") strSQL = "SELECT * FROM Trade_List WHERE Entity_Number = " & request.form("ID") rsTrade_List.CursorType = 2 rsTrade_List.LockType = 3 rsTrade_List.Open strSQL, adoCon2 Set rsTrade_Delete = Server.CreateObject("ADODB.Recordset") StrSql = "DELETE * FROM Trade_List Where Parent_Entity_Number=" & request.form("ID") & " AND Entity_Number <> " & request.form("ID") rsTrade_Delete.CursorType = 2 rsTrade_Delete.LockType = 3 rsTrade_Delete.Open strSQL, adoCon2
The error occurs on the final line listed. Being new to MySQL, I thought I would change teh driver to 5.1 but that brought me nowhere. I used "SELECT" in the string and tried to do rsTrade_Delete.Delete and that did not work. I tried to delete a single record by selecting a ID=1 and that did not work.
So, is there a trick to deleting records in MySQL?
Thanks for your help....
Regards,
SteveStrSql = "DELETE * FROM Trade_List Where Parent_Entity_Number=" &
request.form("ID") & " AND Entity_Number <> " &
request.form("ID")
The DELETE statement for MySQL deletes entire rows. No need to specify fields (or all fields with the asterisk). In fact, that should probably result in a syntax error.
StrSql = "DELETE FROM Trade_List Where Parent_Entity_Number=" & request.form("ID") & " AND Entity_Number <> " & request.form("ID")
Mark A. Boyd
Keep-On-Learnin' :-) -
Siebel Error when creating new record
Hi,
We are getting the below error everytime we are trying to create a new reocrd in the Siebel WebClient Pharma8.0.
"A Record that contains identical values to the record you have created already exists. If you would like to enter a new record , please ensure that the field values are unique. (SBL-DAT-00381). "
Everytime I try to create a new Account or contact or new instance of a workflow I am getting this error.
Also this error only occurs when I login to client as 'server' , if I login as a 'local' it doesn not create any error while creating a new record.
Could this error be because of the Database or does it have to be with the Siebel Client Installation.
Please help if anybody has faced such an issue before.
Thanks :-)Hi,
Turn on a level 4 log and you should be able to figure this out.
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com
Maybe you are looking for
-
Exporting images the correct mb size
Hi I'm having trouble exporting files at the mb size I want. I go to edits and set everything on the maximum export size and quality, so in effect a 10mb file gets slimmed down to about half at 5mb and I canot figure why this happens! I have shot in
-
Implementing the IF_WORKFLOW interface into a custom class
In workflow tasks you can use ABAP Classes and their methods to implement functionality instead of always using BOR objects. I created a class with a static method and got it to work outside of my task. As soon as I put the class and method into my t
-
Hey guys, i was choosing to buy the Canon Rebel T3 but mostly at all of my locations they are listed as "unavailable" but before they were labeled as "unavailable" then "ship to store" then they they were "available" again then back to "unavailable".
-
Why does the iPad make the same noise when it connects to a charger that doesn't charge it as one that will charge it??? I would expect that it would make an unusual noise if plugged into a generic USB charger that does not have enough oomph to charg
-
from apple store they mention free but when i instal they deduct money from my account, can i ask why?