Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

Hi to all.
Currently, i am trying to install patches for portal server.
The server OS is Sun Solaris 8.
We are using Oracle9iAS.
Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
We managed to install the patch, but have problem with the Post Install Action.
We managed to run
-ALTER SYSTEM ENABLE RESTRICTED SESSION;
-@rdbms/admin/catpatch.sql
-ALTER SYSTEM DISABLE RESTRICTED SESSION;
-CONNECT / AS SYSDBA
-update obj$ set status=5 where type#=29 and owner#!=0;
-commit;
But, when we come to the next command, which is to shutdown, it gives us like
this..
SQL> update obj$ set status=5 where type#=29 and owner#!=0;
1402 rows updated.
SQL> commit;
Commit complete.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORA-00604: error occurred at recursive SQL level 1
ORA-01219: database not open: queries allowed on fixed tables/views only
We tried to startup the database..it gives us this error..
SQL> startup
ORA-01081: cannot start already-running ORACLE - shut it down first
So, we tried to shutdown again..
SQL> shutdown immediate
ORA-01089: immediate shutdown in progress - no operations are permitted
I been informed that this is maybe a Database problem related. Any ideas?
Best Wishes,
Rushdan Md Saad.

Patchsets could be obtained (only) from http://metalink.oracle.com
You need to have valid CSI for access.
P.S: Sorry Werner, I didn't see you post.
Message was edited by:
Ivan Kartik

Similar Messages

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • Getting error when activating serial key with cs6 creative suit  specifically for the Flash Builder 4.6

    I got he the software Adobe Creative  Master Suite CS6
    was able to activate all the software  except   Flash Builder 4.6  keep getting message Serial number is not valid cs6 master collection serial.
    Is there anything else needed to be done when activating  the program.
    Please advise

    I have been able to resolve by completing clean/complete uninstall and re-install -- as per these instructions:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • I keep getting a secure connection failed error when tryin to open a site I have used for the past 3 years with no problems...It's for my college, HELP!

    Secure Connection Failed
    The connection to the server was reset while the page was loading.
    The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.

    Some security coding was remove as unsafe.
    Please provide a link to a public page.

  • Service accounts for the Workspace Database service permission Error while creating Tabular Mode from PowerPivot

    Hi All,
    Please help me out against this issue. I have spent so much (3 working days) time just figuring out what is the issue and its solution.
    I am learning Tabular Mode and trying to create a mode based on PowerPivot model. I am getting following error message:
    'The PowerPivot workbook could not be imported. The service account for the workspace database server does not have permission to read from the PowerPivot workbook.'
    Here is my infrastructure:
    1. SSAS in Tabular Mode is installed on my Windows 8 Laptop
    2. PowerPivot is also in my laptop
    3. There is only my account (as Admin of course) for SSAS
    Here are my questions:
    1. What is this error and how can I cope with that? A step by step explanation would be highly appreciated :-)
    2. Do I need to change something in Windows settings or in SSAS?
    3. I am confused about my workspace database server as well, Do I have to install SSAS twice; one for development and one for workspace?
     Looking forward for the expert advise.
    Tahir
    Thanks, TA

    Hi,
    I suspect you might have more luck if you try the SSAS forum: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlanalysisservices
    Regards
    Jamie
    ObjectStorageHelper<T> – A WinRT utility for Windows 8 |
    http://sqlblog.com/blogs/jamie_thomson/ |
    @jamiet |
    About me

  • Error when install Infrastructure 10g 10.1.2 in Windows2000 server

    My environment:
    RDBMS Version: 10.1.0.3.1
    Operating System and Version: Windows2000 SP4
    Product (i.e., OAS, IAS, etc): 10g AS Release 2
    Product Version: 10.1.2
    JDK Version: 1.4
    I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
    Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
    Subscriber Naming attribute: dc
    Default Subscriber Name: server01
    *** Resetting user DN and GUID information ...***
    Done....
    PL/SQL procedure successfully completed.
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    NLS_LANG character set = WE8MSWIN1252
    NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
    ERROR : Exception while configing SSO DAD :
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
    at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
    Please advice.
    Thanks
    Trung

    I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
    When you get the error, start OID using the command line then try running the config assistant again.
    Hope this helps
    Alex

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

  • Getting an "installer failed to initialize" error when installing CS5 from CD

    Getting an "installer failed to initialize" error when installing CS5 from CD
    Mac OS X Version 10.7.5

    Try using the Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html
    If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    CS5:
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  • Error when installing SDK on BW platform

    We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
    I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

    Hi,
    it could be that the depending extension was unpacked while installing the extension pack.
    please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
    uninstall the extension pack in your Design Studio (client side),
    go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
    if it is checked please unckeck it,
    export your extension pack to zip-file,
    install your extenion pack again on client side,
    now the jar-file should be available.
    You sholud deploy your extension on Server without any errors.
    kind regards
    Patrick

  • Error when installing SM7 "The step runMigrationMonitor with step key "

    Hi all
    Please help for the following error when installing
    ERROR 2009-06-13 00:27:13.515
    FCO-00011  The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
    Regards
    Kevin

    Hi Uday
    import.monitor.java.log
    Loading of 'SASACONT1' import package: OK
    Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
    Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
    Loading of 'SAPSSEXC' import package: ERROR
    Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
    Loading of 'REPOSRC' import package: ERROR
    Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
    Loading of 'SAPAPPL0' import package: ERROR
    Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
    Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
    Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
    Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
    Loading of 'DOKCLU' import package: ERROR
    Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
    Loading of 'SAPAPPL1' import package: ERROR
    Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
    Loading of 'SAPAPPL2' import package: ERROR
    Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
    Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
    Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
    Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
    Loading of 'DD03L' import package: ERROR
    Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
    Loading of 'SAPSSRC' import package: ERROR
    Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
    Loading of 'STERM_TEXT' import package: ERROR
    Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
    Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
    Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
    Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
    Loading of 'SEOSUBCODF' import package: ERROR
    Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
    Loading of 'E071K' import package: ERROR
    Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
    Loading of 'SAPSDIC' import package: ERROR
    Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
    Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
    Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
    Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
    Loading of 'ATAB' import package: ERROR
    Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
    Loading of 'SAPSPROT' import package: ERROR
    Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
    Loading of 'SAPSDOCU' import package: ERROR
    Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
    Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
    Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
    Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
    Loading of 'SAPPOOL' import package: ERROR
    Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
    Loading of 'SAPSLOAD' import package: ERROR
    Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
    Loading of 'SAPSLEXC' import package: ERROR
    Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
    Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
    Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
    Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
    Loading of 'SAPDDIM' import package: ERROR
    Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
    Loading of 'SAPDFACT' import package: ERROR
    Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
    Loading of 'SAPCLUST' import package: ERROR
    Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
    Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
    Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
    Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
    Loading of 'SAPDODS' import package: ERROR
    Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
    Loading of 'SAP0000' import package: ERROR
    Import Monitor jobs: running 1, waiting 1, completed 4, fail
    ed 23, total 29.
    Loading of 'SAPUSER' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
    Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
    Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

  • Error when installing "contents of this disk cannot be changed".

    I'm getting this error when installing Snow Leopard, 'The contents of this disk cannot be changed'.
    Any ideas?

    Install 10.5.8 COMBO update, then try SL.

  • Error when installing app

    I keep getting an error when installing some apps - unknown error (0xE8000013)
    Anyone know what this is or why this is happening???
    any help apreciated

    leefilmer,
    Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
    Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
    Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
    Hope this helps,
    Raleigh

Maybe you are looking for

  • Only one epub file will not open in ADE or on my Nook. The others I downloaded will open on both and will copy to the Nook as usual.

    I download epub books from Overdrive. Only one epub file will not open in ADE on my Mac or on my Nook. The many others I've downloaded will open on both and will copy to the Nook as usual. Using the latest edition of ADE. Could be a corrupted ePub fi

  • My Nokia Lumia 928 sound

    My phones audio/sound has completely stopped working. No ringer, no music, no sound what so ever. Does anyone know why and how to fix it?

  • Photos look diff in Mac vs PC--HELP!!!

    I'm having an issue with photos looking amazing on my iMac but on PC or iPhone they look terrible!  Like skin tones are green or yellow.  This only happens about 5-10% of time.  I don't know if it's my workflow or actions I'm using or I need a monito

  • Change NSString encoding

    Hi. I am making a TableView app here's my code : http://pastebin.com/myvW9ixk Is there anyway to change factsFile's (NSString) encoding ? Because the file that i download is in ISO Latin. Thanks, Senly Message was edited by: Senly

  • How can I get details onto my photos?

    I want to use my iPad for a project on trees and want to put names, locations, season etc on the  pictures. Do I need to purchase an add on application and if so has anyone any recommendations?