Error when opening Fireworks CS3 by first time

I downloaded the trial version of Fireworks CS3 as I'm
planning to buy it, but after downloading and installing it,
Fireworks wouldn't work, a message appeared saying that the License
for the product stopped working, I tought a problem might have
ocurred during downloading so I downloaded it again, installed but
the same problem continued. The message that appeared also said
that maybe reinstalling would be the solution but it wasn't.
THE
MESSAGE BOX ERROR
What can I do?

I've read all of the instructions, but I'm afraid that I only
count with 8 of the 9 requirements, I have a RAM of 448MB, anyhow I
don't think this has anything to do with the error I got, as the
RAM would only affect how fast the program would run, it WOULD let
me open it.
btw, the download comes with Bridge CS3, the extension
manager and stuff, they all work correctly, expect fireworks wich
is the most important thing, why wont Fireworks work????????? It's
depressing.
I also noticed some innadequate behaviour where the software
is placed at; the installer creates a folder named "Adobe" wich is
fine, but the programs are placed outside that folder, is this a
sign that has to do with the problem I'm experiencing?
Thanks in advance.
EDIT: I just realized that I installed Photoshop CS3 extended
Lite, it might be the problem, but there's even a bigger problem: I
can't uninstall it!! i don't know why, any ideas?

Similar Messages

I downloded iphoto 11 9.2 and when opened it for the first time and the program started to update my iPhoto library the file got corrupted. That has happened in the two macs I have (both of them rather new and updated to last Lion version 10.7.2).

I downloaded Iphoto 11 9.2 from the apps store (was on iphoto '09 before version 8.x) and when opened it for the first time it tried to update my photo librery and ended up corupting it to the extreme that I had to get a backup from time capsule and downgrade my iphoto version. I spent yesterday 6 hours at the genius bar in an apple store and they were not able to provide me with any other solution. In the emantime, I have to forget about about photo streaming... Any idea, is this a bug that somebody knows how tp fix?

In fairness, this isn't an issue in iPhoto 11 but one in your Library. Some file or other in there is damaged and that's what causes the crash during the upgrade.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

Time Machine: Repeated errors when backing up for the first time using a new external firewire drive

My Iomega 500GB firewire external drive failed on me last week and I have just replaced it with an identical model. I used to use the old drive with Time Machine on my MacBook Pro running 10.5.8 with no issues, until the drive had a hardware failure and stopped spinning up, hence the replacement.
Two days ago I tried using Time Machine for the first time with the replacement external drive. The backup failed and each subsequent backup attempt has failed since then with a different error each time. The drive cannot be ejected using Finder (Finder says disk is in use and cannot be ejected even when no processes are running except for Finder and Time Machine has been disabled), by dragging it to the dock (hangs computer which can only be fixed by a hard reboot), in Disk Utilities (drive cannot be unmounted) or in Terminal ("no such file or directory").
The first backup attempt failed after 3 hours of "preparing" with the message "The backup was not performed because an error occured while creating backup directory".
I tried repairing the disk in Disk Utilities and Disk Utilities said the drive was OK ("the volume Time Machine Backups appears to be OK"). I tried ejecting the drive (hard reboot of computer and disconnecting the drive), plugging it back in again and trying again.
This time it started backing up, then failed after a few minutes with the message "an error occured while copying files to the backup volume". I had a look at the troubleshooting suggested on http://web.me.com/pondini/Time_Machine/C3.html and followed instructions. It failed again, so I did a full reset as per http://web.me.com/pondini/Time_Machine/A4.html.
It failed again, so I tried reparing the drive again in Disk Utilities and again it said it was OK. I tried using different cables and ports (Firewire 400 instead of Firewire 800), and backups still fail.
I have turned off anti-virus scanning (Sophos). I have tried excluding it from Spotlight but this causes an error message from Spotlight. I have tried trashing the com.apple.TimeMachine.plist file and rebooting. I have tried selecting deselecting the drive as the back up in Time Machine preferences, selecting "None", then "Stop Backing Up" then quitting preferences, rebooting, disconnecting the drive, reconnecting the drive and selecting the drive again as the backup disk in Time Machine preferences. I have tried erasing the drive completely, rebooting, and trying to back up again.
None of these have worked. This is a brand new drive and I do not want to have to replace it again if I do not have to.
Does anyone have any suggestions? Thank you.

Hello, some possible clues...
Should you click “Start New Backup”? Not yet! If you see the dialog above, your existing Time Machine backup is corrupt, and you might not be able to recover data from it. But you can save a copy of the corrupt bundle and, perhaps, extract some data from it if needed.
Ask yourself if Time Machine has saved data you might need before deciding what to do next:
If you are sure you won’t need anything backed up before today, click “Start New Backup” and let Time Machine do its thing.
Otherwise, click “Back Up Later” and save a copy before letting Time Machine start a new backup. Just look for a file called “computername.sparsebundle” (for network backups) or “Backups.backupdb” (for local ones) and create a copy with a different name. You can open sparsebundle files with DiskImageMounter and browse them like any other disk. More information is available here.
There you go. If you click “Start New Backup” when you see this dialog box, Time Machine will erase all of your old backup data and start a new bundle. It won’t be corrupt, but it will be empty.
Note that you can manually initiate a Time Machine backup integrity check by option-clicking the “Time Machine” icon in the menu bar and selecting “Verify Backups.”
http://blog.fosketts.net/2010/08/11/time-machine-completed-verification-backups- improve-reliability-time-machine-create-backup/
According to This Time Machine resource “This appears only on Snow Leopard, and started with the Time Capsule Backup Update 1.0 in mid-May of 2010. It also seems to have been included in the 10.6.3 v1.1 update and 10.6.4.”
So, what can you do about it? Grin and bear it, it seems, until Apple fixes it.
One thing you can do to make the backup take less time is to connect your machine to your Time Capsule or other backup drive via Ethernet for the duration of the initial backup.
http://www.theinternetpatrol.com/the-dreaded-time-machine-has-completed-a-verifi cation-of-your-backups-to-improve-reliability-time-machine-must-create-a-new-ba c kup-for-you-message-and-why-you-are-seeing-it/
Time Machine: About "Time Machine completed a verification of your backups. To improve reliability, Time Machine must create a new backup for you."...
http://support.apple.com/kb/HT4076
Or a different/better solution in my experiences...
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
Or the most expensive one & my favorite, Tri-Backup...
http://www.tri-edre.com/english/products/tribackup.html

Download music from ipod when opening iTunes for the first time?

I just got a new iMac at work and the first time I plugged my iPod into the comupter to charge it up it opened my iTunes and then started to download all my songs from my iPod. Being 7am I wasn't thinking properly and pressed cancle to stop the download, then I remember I have 500GB free memory and why shouldn't I have my music on the computer. The problem is I can't get it to download the music again. I know you not ment to be able to download from your ipod but that is what happened.
I have tried completely uninstalling iTunes by removing the icon in Applications and in the User>Music folder to get the same result but it makes no difference, where I once had a couple of meg's worth of music which had started to download I have none. Can somebody please explain to me how this happened and how I can revert iTunes back to how it was before I opened it so I can quickly download all my music onto my computer??

We'll unfortunately that's not true. I had though that was the case as well until this happened. I wasn't sure if this a new feature that iTunes had for when you first attach an ipod to a new iTunes (where you need to go through the terms and conditions, and set up your settings at the beginging).
I have downloaded very little from the iTunes store and the things which got downloaded were some funny adds which I had converted and put on my ipod as well as some AC/DC, some Beatles and a collection of 179 other songs (I'd be lucky if I've downloaded 5 songs in my life from iTunes). Before deleting everything in the hope that I could do it again I even played a couple of them in case all it had done was take the album artwork or something. But they all play fine and none of them were ones I had downloaded.
Does anyone know what's happened and how it can be repeated?
As to the other ways of getting music of your ipod I'm aware of them and have used irip in the past without any problems. I know how to do it that way but now that I have been made aware of this other way I was wanting to clear up how it happened and if it can be repeated, say if I was to reinstall iTunes.

Error when booting app server for first time

Hi All,
My OS is OEL 6,PT 8.53 and HCM9.2 after creating the app server domain and booting it for first time i am getting an error as below,
exec PSWATCHSRV -o ./LOGS/stdout -e ./LOGS/stderr -A -- -ID 221921 -D TESTSERV - S PSWATCHSRV :
CMDTUX_CAT:816: ERROR: Cannot exec, executable file not found
tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error ha ndler
exec tmshutdown -qy
Any help appreciated.
TUXEDO LOG Says,
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: client high water (0), total client (0)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5379.1098766080.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:879: INFO: A new file system has been created. (size = 1197 512-byte blocks)
162253.wipcoe1234!tmloadcf.5384.2986219264.-2: CMDTUX_CAT:871: INFO: TUXCONFIG file /home/oracle/psft/pt/8.53/appserv/HCMDM92/PSTUXCFG has been created
162258.wipcoe1234!PSADMIN.5355: Begin attempt on domain HCMDM92
162302.wipcoe1234!tmadmin.5392.1509406464.-2: TMADMIN_CAT:1330: INFO: Command: boot -A
162304.wipcoe1234!tmboot.5393.2297452288.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162304.wipcoe1234!tmboot.5393.2297452288.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162306.wipcoe1234!BBL.5394.2180380416.0: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit, Patch Level (none)
162306.wipcoe1234!BBL.5394.2180380416.0: LIBTUX_CAT:262: INFO: Standard main starting
162308.wipcoe1234!tmboot.5397.3909768960.-2: 05-03-2013: Tuxedo Version 11.1.1.3.0, 64-bit
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1851: INFO: TM_BOOTTIMEOUT is set to 120 seconds
162308.wipcoe1234!tmboot.5397.3909768960.-2: CMDTUX_CAT:1855: INFO: TM_BOOTPRESUMEDFAIL option is selected
162308.wipcoe1234!tmboot.5397.3909768960.-2: tmboot: CMDTUX_CAT:827: ERROR: Fatal error encountered; initiating user error handler
162311.wipcoe1234!BBL.5394.2180380416.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
162314.wipcoe1234!PSADMIN.5355: End boot attempt on domain HCMDM92
Edited by: ajith on May 3, 2013 5:39 PM

If not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.

Error when launch MaxDB studio for first time

Dear, Experts
I faced with one issue for launch MaxDB studio for first time.
It reported:
Connect user failed
SAP DBTech JDBC: Cannot connect to jdbc:sapdb://.../.UMDB [Restart required].
Creating default user management failed
Could not create database ".UMDB": [C:\sapdb\clients\DatabaseStudio\pgm\dbmcli.exe] > ERR, -24832, ERR_SHMNOTAVAILABLE ...
Could you please help me on this?
Thank you in advance.
Best Regards

If not solved yet...
What says appsrv.log ? Which user are you using to start the appserver ? Which user have you specified when sreating the database ?
Nicolas.

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

Lov is not validating when i open a form for first time

hi all,
i am using form6i.
i have one multi record block. in which lov is attached to it.
but when i open the form for first time the item corresponding the above said is not showing and if i enter the value then also its not validating against. its showing error frm-40210
but when i click on other item and come to this item Lov is showing.
what could be the reason for this strange behaviour.
i have checked set_item_properties too(there is properties have been set)
Please advice.
Thanks..

FRM-40210: Search string not found.
what could be the reason for this strange behaviour.Do you have an "Initial Value" set for the item? Do you have the "Validate from list" property set to yes or are you setting the initial value through code?
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour

I have just bought iphone 5 and i have a problem in charging it , firstly it took a long time to charge when i opened it to the first time , and its nearly dont charge on 110 output, and its taking a long time to charge on 220 reaches 50% in 1 hour is this normal?

The charger block is universal and is able to handle multiple votages. One hour to reach 50% seems fine to me if the phone was completely flat to start with. Just leave it on charge for as long as it takes to reach 100%. I leave mine connected overnight all the time and it does not harm the battery

Javascript error when opening CS3 on pc..?

I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating
'JavaScript Error'
'Error Number 45'
'Error string :Object is Invalid'
'Line 387'
also
'JavaScript Error'
'Error Number 45'
'Error String; Object is Invalid'
'Line 428'
there was a problem initially due to program plug-ins reported missing so i tried going onto 'Help' and clicking on 'Configure Plug-Ins' from the drop down menu.
Not sure what i did.. but now i cannot use ID as it shuts down after the javascript errors are reported.
Anyone help?

hi
thanks for all the helpful info
i tried to reinstall INDESIGN only... didnt work same problem.
i tried by uninstalling INDESIGN and then reinstalling it only.... didnt work same problem.
I guess im going to have to do a full reinstall.. not a problem, do i need to contact yourselves to get clearance for a reinstallation?
I had a hard drive crash about 6 months ago and had to reinstall, had to phone Adobe and get an online clearance as id exceeded my sole installation for my CS3 hard copies.
thanks again
Date: Sat, 2 Jan 2010 09:50:57 -0700
From: [email protected]
To: [email protected]
Subject: Javascript error when opening CS3 on pc..?
I'd bet the original scenario was something like you tried to open a file and saw a message that you were missing plugins, or they were out of date, and that you should update or upgrade. That's the typical message you get when you try to open a file saved from a newer version of ID. Unfortunately it's quite misleading -- nothing you do to the plugins will help you in that case, and trying to use newer versions would be disastrous.
You should be able to selectively reinstall just ID. If you have the DVD you can run the installer and do a "Repair" installation, and if that doesn't work, you should be able to uninstall ID, then reinstall without removing the whole suite. If that still doesn't work, bite the bullet, uninstall everything and run the clean script (http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=1), then reinstall. I'm not sure what happens with a downloaded installer, but I suspect it works the same. I'm pretty sure I read somewhere that to uninstall from a download you need to have it in the same location as was originally used for the installation.
Peter
>

Just installed logic studio according to the instructions but when i try to open it for the first time it show "logic pro quit unexpectedly". What shall i do?

just installed logic studio according to the instructions but when i try to open it for the first time it shows "logic pro quit unexpectedly". What shall i do?
Sharad

Dear Katty,
Thank you very much for your answer! I have 2 Apple ID, and I have tried both of them and the problem continues. I founf several peolpe with the same problem in apple communities foruns and that really seems that there is some problem. I addded the links for 2 of those discussions.
https://discussions.apple.com/thread/3374419?start=0&tstart=0
https://discussions.apple.com/message/16628399#16628399
Do you have an idea of how can I solve this problem?
Thank you very much again.
Best regards,
Alfonso

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install.

Ive just upgraded my late 2009 macbook, and things are not working properly. First of all, when I started the computer first time after installing Mountain Lion, some message advised me that some files were impossible to install. Once I wrote my password, and for now on, everytime I start the session, another window advise me that "Java SE 6" is missing, due that, the computer can't run some "CS5Service Manager". If I try to install it, the download ends with an error. If finally, you skip the istallation, you arrive to the dock, but the menu bar at the top of the screen doesn't show up.
In addition, my trackpad doesn't works either. I can move the arrow but i can't click anywhere, probably because the option of clicking by touching is disabeled and I can't performance a regular click.
I'll be very glad if someone know what the heck is happening with my computer. Anyway, I'm going to the genius bar next Saturday. Thx!

We're sorry.
We can't find the article you're looking for.
Please return to the Apple Support homepage.
Sigh.

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Error when opening User and Group Preferences

After upgrading to Lion there is an error when opening User and Group Preferences.
I´ve repaired permissions but the problem is still there...
Thanks...

Hi,
Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
or
Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
Hope it helps,
Reward points if helpful.
Regards,
Shailesh Nagar

Error when opening Fireworks CS3 by first time

Similar Messages

Maybe you are looking for