Error when processing Network

Dear all.
I create a sales order in tcode va01 and input a wbs element E-000009.1 in the field of WBS Element at Account assignment tab of one item detail.When save the sales order,sap pop up a message box with text "Sales order has no CO object".The detail message content was pasted at bottom.When confirm the first message box,sap pop up the second message box with text "Error when processing Network".The detail message content was pasted at bottom.
So I need the experts give me some useful advice and reference to resolve the problem.
Thank you.
Regards
Yoda
Sales order has no CO object
Message no. CO323
Diagnosis
The production order should be settled on the sales order.
The requirements type of the sales order, however, refers to an account assignment category that does not allow settlement using the sales order (key consumption posting).
Procedure
1. Check which requirements type in entered in the relevant sales order item
Display sales order
2. Check the settings for this requirements type in Customizing
(See Control sales order-related production).
Error when processing Network
Message no. V1380
Diagnosis
A technical error has occurred. On calling up the assembly interface, exception 2 was triggered. The exceptions have the following meanings:
1 = External block
2 = General error
3 = Insufficient data for the interface
4 = Order was not found
5 = Update has been rejected
6 = Final document number for Network is not issued
Procedure
Inform your system administrator.

Dear shashank.
Thanks for you reply.
1.I have checked the sales order and the requ. type was KMNP.In tran OVZH the requ. type KMNP use the ReqCl 202.In tran OVZG I checked the ReqCl 202 and the "Acct.assig.cat." was Q and the Consumption was P.
2.In tran cj20n I checked the wbs element.Its operative indicator was billing elements.
3.In tran mm03 I try to found the field of "req type / strategy".But I could not this field.Could you tell me the "req type / strategy" field was in which view?
Thank you so much.
Regards
Yoda

Similar Messages

MSS Reports - Error when processing your request

Hi Experts,
We got the following error, while executing MSS reports. Would really appreciate kind guidance to reslove the issue.
Error as below:
Error when processing your request
What has happened?
The URL http://m2003075d.**********/sap/bc/gui/sap/its/HRWPC_FC_EXEC was not called due to an error.
(Intentionally kept **** to kept confidentiality about the client)
Note
The following error text was processed in the system ECQ : Template interpretation cancelled, syntax error.
The error occurred on the application server M2003075D_ECQ_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSLVC_FULLSCREEN
Function: REUSE_ALV_GRID_DISPLAY of program SAPLSLVC_FULLSCREEN
Form: DISPLAY_LIST of program RPTQTA10
END-OF-SELECTION of program RPTQTA10
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ECQ in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server M2003075D_ECQ_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server M2003075D_ECQ_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: MANAGER1 -l: E -s: ECQ -i: M2003075D_ECQ_00 -w: 0 -d: 20090710 -t: 160454 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Thanks in advance,
Aashish

Hi,
You need to Publish the services in a proper sequence, then only it will get activated.
Also switch between SAP GUI for windows and SAP gui for HTML, because if you are accessing the system through network, problem may arise.
Try switching between these launchpads, might help you.
Publish the WEBGUI first, SHUFFLER then, and dont forget to publish completely, else it wont work.

Error when processing your request

Error when processing your request
What has happened?
The URL http://vinay:8000/sap/bc/webdynpro/sap/zfirst_web was not called due to an error.
Note
     The following error text was processed in the system NSP : Die URL enthält keine vollständige Domainangabe (vinay statt vinay.).
     The error occurred on the application server vinay_NSP_00 and in the work process 0 .
     The termination type was: RABAX_STATE
     The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
     If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system NSP in transaction ST22.
     If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server vinay_NSP_00 in transaction SM21.
     If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server vinay_NSP_00 . In some situations, you may also need to analyze the trace files of other work processes.
     If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: BCUSER -l: E -s: NSP -i: vinay_NSP_00 -w: 0 -d: 20090622 -t: 074756 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

Hi Thomas,
I realize this is a rather old discussion, but I wonder if you know whether running transaction SGEN to generate the loads for either all web dynpros or just a particular transport containing a custom web dynpro would resolve the slow response time and timeout. After a customer message with SAP, this was their suggestion, however our Basis team is skeptical that this will have the desired effect. We noticed the issue when moving from development to QA so we won't know if this is the solution until we try it in production upon go-live.
Cheers,
Amy

Error in BPM - Error when processing node '0000000065' ParForEach index

Hi All,
I have an issue .. I have done 1:n mapping successfully and would like to place the Send step in loop instead of a Block .. The reason being I have the count of how many times the Send step should executed for multiline.. I need to receive an Acknowledgement for each send step.. If I dont receive the required number of Acknowledgements then .. I need to revert back some Creations which is a business requirement ..
So .. I have initialized a container operation variable i to '0' .. Then the loop condition is i < count .. Send the multi-container .. Receive the Response .. If dont receive the desired response for any one of the multi-line then I need to do a cancellation process in a loop again .. So .. now I am getting an Exception "Error when processing node '0000000065' (ParForEach index 000000)
Message no. SWP088" in the loop step ..
It is fine if somebody can suggest alternate logic can be applied as well but first preference to use a loop which consumes lesser system resources ..
Kindly look into the Issue
Regards,
Raj
Edited by: raj2112 on Sep 21, 2010 2:34 PM

if you use a loop step, you will send one message per time. ussing block step you have parallel processing ussing ParForEach. now is for X reason the item cannot be created, do a roll back in the target system. the problem here you will do the rollback once the last message reach.
the other posibility is to handle application ack in the sender step. it will let you know it the message was processed success and this ack could be the end condition of your block step. but you cannot use this with loop step.
take a look to this
http://help.sap.com/saphelp_nw04/helpdata/en/55/65c844539349e9b1450581ab44a5e6/frameset.htm

Soap response Error when processing XML CF.

Hello,
I have problems with soap response and wondered if you could give some advice.
Every time I send my message via soap I get the following error:
com.sap.aii.af.ra.ms.api.RecoverableException: SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Error when processing XML CF.
Is it possible that the communication is aborted and my response message mapping is never started?
(Additional info: I tried to create an integration process and am not able to evaluate the response.)
Thanks a lot for your help.
Regards,
Julia

hi,
do you see any more error details in :
http://xiserver:port/MessagingSystem/monitor
did you check logs in visual admin ?
>>>>Is it possible that the communication is aborted and my response message mapping is never started?
yes - if the response is not ok the mapping may not be started
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Mass processing - Error when processing Java programs / VMC out of memory

When running a mass update background process that updates the status of a service order in CRM the job fails due to error 'Error when processing Java programs'. I checked the VMC (SM52) and noticed that there is an error about the VMC running out of memory.
The background program can either be a PPF Action or a Z-ABAP program that performs the update. Both programs are performing a CRM_ORDER_INITIALIZE but it seems that the VMC is not releasing the memory fast enough.
Is there anyway we can force the VMC to release the memory after processing of each individual order?
Thanks!

I got similar issue and it got resolved by useing CRM_ORDER_INITILAIZE. Initalization should happen after every Order processing and see that only one header guid is passed to the the FM. May not be good option ,but just try by putting wait for 5secs after CRM_ORDER_INITILAIZE.

Errors when processing web service call

Hello Experts,
Based on a requirement, I got a URL based on WSDL, using which I created a Consumer Proxy in SAP.
I created a Logical Port in SOA Manager with type selected as 'WSDL'.
When I'm trying to execute the proxy class to call the webservice using the logical port through SE80 it is throwing an error log as stated below.
1) SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
2)Error when processing Web service call
3)Error when calling SOAP Runtime functions: Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
Kindly help me out.
Thanks,
Vamshi

Hi,
Check Anton's reply in this thread: External WS Consumption Issue
Also refer the below doc which may help you: Consume an External Web Service in a Nutshell with Good Old ABAP
Calling WebServices from ABAP via HTTPS
Regards,
Kiran

Error When Processing Picking List Script.

Hi Experts,
I have created Script for Picking List,
I am getting the below error when processing ...
Error Info... VN 073: Errors occurred while processing output
Its working fine when Standard Script SD_PICK_SINGLE is used ..
Pls Help.
Regards

Hi Raghu,
Before processing your picking list form make sure you have created a output type for it and you have assigned your form name and program name to that output type. you can see this in TCODE: NACE
Thanks,
Pritesh

Error when processing your request -syntax eror in program /1BEA/SAPLCRMB_O

Hi All,
I have regenerated Billing Application in CRM 7.0. From then I am getting a dump on Web UI . Error as below.
Error when processing your request
The URL http://hostname/sap/bc/bsp/sap/crm_ui_frame/bspwdApplication.do was not called due to an error.
The following error processed in the system: "syntax error in program /1BEA/SAPLCRMB_O".
This Dump does not occur every time. now & then I am getting the dump but not every time. mostly it comes when I process any thing for the first time on UI.
Please help me out to fix this dump. it is a standard program so we can not correct the program. Please let me know if there is any other way to fix this problem.
Thanks in advance
JM

Hi,
This is not a standard program, this is a generated program through billing engine. I guess you'd have to regenerate the program. Talk to your functional folks who created this.
Regards
Prasenjit

Error when processing asset under construction (AuC) for WBS element message no cj824

Hi,
i am getting error message when i change dates in activities.
Error when processing asset under construction (AuC) for WBS element
Message no. CJ 824
i have checked related post but did not find any solution. also check SAP Note but not related to my issue.
Please guide.
thanks
Sunil

Hi Ken,
Please check below screens:
according to this error message AUC has some missing field or some incorrect value. but when i checked via program RAUNVA00 which will display
Incomplete Assets - Detail List.
but this program does not return any incompleteness.
i found many threads and SAP Not but none of is related to my program. this problem comes when i change dates in activity and save the project.
Please suggest what to do now.
thanks
Sunil

Error when processing

Dear All,
As the required configuration is done and R/3 and when i am trying to bring this application through SE80 BSP Application with HCM_Learning and execute, I am getting the following error in the Explorer Screen. Kindly request you to advice me on this. I have given the details of the error below.
Error when processing your request
What has happened?
The URL http://r3devsuz.suzlon.com:8000/sap/bc/bsp/sap/HCM_LEARNING/traininghome.htm was not called due to an error.
Note
The following error text was processed in the system DEV : Exception condition "INITIAL_LEARNER" raised.
The error occurred on the application server r3devsuz_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: LSOF_LEARNER_GET_ACTIVITIES of program SAPLLSO_FRONTEND
Method: ONINITIALIZATION of program CLO267CI12QAAMONPBLHCNROVQJS5CP
Method: %_ONINITIALIZATION of program CL_O267CI12QAAMONPBLHCNROVQJS5CP
Method: DO_REQUEST of program CL_BSP_PAGE===================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP

Hi Ravi,
Since your The termination type was: RABAX_STATE
Goto the Tcode ST22 and check for the ABAP Dump analysis.
Also the initial page for the BSP application "HCM_LEARNING" is "leso.htm".
Did you activate the service? in the Tcode SICF.
Hope this helps you.
Regards,
Subbu.

Connection Specific Error When Processing Device Address Book

Hi,
I am using Desktop Manager 4.5 and am getting a "connection Specific Error" on an 8310 when synchronizing a Device Address Book with the desktop. I get this error when processing record 43 of the 374 record of the address book. Is there a way to edit/remove the record on the device to work around the problem versus losing all the records and starting over. I have already cleared the file on the device and restored from the desk top, but apparently the backup also contains a copy of the corrupt record. This must be a common problem. Can any one refer me to a help file that will walk me through a solution?
Thanks,
Paul

http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
Message Edited by Xandrex on 10-19-2008 07:20 PM
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

SNC: ASN - Error when processing your request

Dear experts,
we are implementing SMI scenario with SNC 5.1, we have created in SNC Web UI a Replenishment Order and we have published it now Iu2019m trying to create an ASN releted to that RO but I have another strange error with ASN, could you please have a look and tell me your opinion?
From RO details I click on u201CCreate ASN for Itemsu201D, I insert all the information needed and all checks are successifully passed, but when I try to publish it the following error screen appears me.
This error appears also when I try to save a draft of the ASN.
Error when processing your request
What has happened?
The URL <url> was not called due to an error.
Note
The following error text was processed in the system <System name>: Syntax error in program /1BCPPF/CL_100SCABOL_DLV_X====CP .
The error occurred on the application server <application server> and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: EVALUATE of program CL_METHOD_CONDITION_PPF=======CP
Method: EVALUATE of program CL_CONDITION_PPF==============CP
Method: IF_DETERMINATION_PPF~DETERMINE of program CL_RULE_DETERMINATION_PPF=====CP
Method: DETERMINE of program CL_TTYPE_PPF==================CP
Method: DETERMINE of program CL_CONTEXT_MANAGER_PPF========CP
Method: DETERMINE of program CL_MANAGER_PPF================CP
Method: SEND_SNL of program /SCMB/CL_SVDELIVERY===========CP
Method: SAVE_SNL of program /SCMB/CL_SVDELIVERY===========CP
Method: SAVE of program /SCA/CL_SVDELIVERY============CP
Function: /SCA/BOL_RFC_DLV_CHANGE of program /SCA/SAPLBOL_DLV
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system <system number> in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server <server> in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server <server>. In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
I've checked and reactivated all ODMs related to ASN, according to the SAP Note 1019289 (SNC5.1 Order Documents: Required Customizing).
Could you please give me your opinion about this?
Thank you very much in advance,
Nicola
Edited by: PTP Team Consultants on Nov 1, 2011 4:29 PM

Hi Martin,
Thank you for your answer.
This is the error analysis in transaction ST22:
Error analysis
    The following syntax error was found in the program
     /1BCPPF/CL_100SCABOL_DLV_X====CP :
    "The field "LV_EVAL_OUTCOME" is unknown, but there is a field with the "
    "similar name "RULE_EVALUATION_OUTCOME". "RULE_EVALUATION_OUTCOME"."
Thank you,
Nicola
Edited by: PTP Team Consultants on Nov 3, 2011 12:32 PM

SC-Error when processing your request.

Hi ,
when click the Shop link in the SRm portal, it gives the below error message.
Error when processing your request.
The Error occured on the application server p1bfsp23_FSP_44
There Termination TYPE was : ABORT_MESSAGE_STATE
The ABAP call stack was :
Form:OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form:EXTERNAL_SCREEN_DETERMINE of Program SAPLBBP_SC_UI_ITS
Module:EXTERNAL_SCREEN_DETERMINE of Program SAPLBBP_SC_UI_ITS
Please assist me on this.
Thanks,
Dev

Hi Devaraj,
Please provide the below information from the full dump (transaction st22):
Runtime Errors
Exception
Short text
Information on where terminated
Active Calls/Events
With this information it will be possible to have a better idea about what could be causing this dump.
Best regards,
Christian Zeuch

URL error when processing request ITS 6.40

Hi all
I have a problem at customers site and below is a description of the case. All input in this issue is appreciated of course since I am running out of ideas.
Problem:
When accessing transaction WW20 via internet explorer (http://server.domain:8000/sap/bc/gui/its/ww20?sap-client=100) I got an error when processing request.
It basicly says: Communcatione failure. However ST22 and SM21 does not say anything about this.
The errorcode on the webpage returns:
Error code: ICF-IE-http -c: 100 -u: IAMWEB -I: E -s: KAY -i: ksnoka_70_KAY_01 -w: 0 -d: 20080702 -t: 153240 -v: IMC_CANCEL_TX -e:
note: KAY is SID for the system and ksnoka is the hostname of the windows server.
OBS: Calling transaction WW20 in sapgui localy works fine but not via ITS. Webgui works fine and I have checked follwoing:
- Paramteres in RZ10 - should be ok!
- SICM up and running
- run report RSXMB_ACTIVATE_ICF_SERVICES in SE38 successfully
- W3_publish_services in SE38 ticked all in package S_webgui and S_ITSP.
Note the WEBGUI service works well;
Also when I run a test link: "http://ksnoka70.corp.kagroupad.com:8000/sap/public/ping" It gives me a message "Server reached successfully" - so I assume it's all ok with the web serwer.
The customer has set up this WW20 transaction as a service in SICF.
Looking forward to some input. Cheers ...//Pelle

> Problem:
> When accessing transaction WW20 via internet explorer (http://server.domain:8000/sap/bc/gui/its/ww20?sap-client=100) I got an error when processing request.
> It basicly says: Communcatione failure. However ST22 and SM21 does not say anything about this.
Do you see anything in the trace in transaction SMICM?
Markus

Error when processing Network

Similar Messages

Maybe you are looking for