Error when publishing to file

i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...

If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt.

Similar Messages

  • Flash Player Security error when publishing HTML files

    I am new to the Captivate world and am just in love with the
    features - but I have been having a very difficult time publishing
    my "movies". I have 8 files that are all called upon in one movie
    (like a table of contents). I have abandon the though of publishing
    each as an EXE file - and have decided to go the HTML route.
    However when I try to run the published HTML file I get an Adobe
    Flash Player Security error - saying "Adobe Flash Player has
    stopped a potentially unsafe operation." It then says that the
    local SWF file is trying to communicate with the Internet-enabled
    HTM file.
    Can someone please tell me what this means? We are using
    Captivate for distance learning as well as internal - so I can't
    know for sure what the end-users will be using when the files are
    used.
    Any assistance would be greatly appreciated.

    Welcome to our community, Rachel
    Where are you running your movie from? If you are planning on
    running them from a server, there should be no need to worry about
    your end user seeing those messages. However, if you are planning
    on each user copying them to their own hard drive or if you are
    running from a CD-ROM, you may need to perform some trickery to
    make them work without issue.
    The message is occurring because there are links in some of
    the files that point to internet resources and the Flash player is
    seeing that as a potential security risk. So it is blocking the
    action until you pat it on the head and assure it the world will
    not, in fact, end if it shows you the content.
    If you wish to banish the screen on your PC, take a look at
    the tutorial linked below.
    Click
    here to view a tutorial
    I'll hold off on the other bit until I'm certain what we are
    dealing with.
    Cheers... Rick

  • Error when publishing flash files

    Hello,
    I have been trying to publish .swf files on my page in iweb.
    I have tried all the codes known both on this forum and around the web.
    For some reason I get
    HTTP ERROR: 404 Not Found
    RequestURI=/KASSOPIA//testfiles/widget0markup.html
    Powered by Jetty://
    does anyone know a solution or a reason for this?
    Any help is much appreciated!!
    I have been trying for almost 2 days straight to make this work...

    <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000"
    codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve rsion=6,0,40,0"
    width="400" height="300"
    id="mymoviename">
    <param name="movie"
    value="http://www.rikkikasso.com/movies/i.swf" />
    <param name="quality" value="high" />
    <param name="bgcolor" value="#ffffff" />
    <embed src="http://www.rikkikasso.com/movies/i.swf" quality="high" bgcolor="#ffffff"
    width="400" height="300"
    name="mymoviename" align="" type="application/x-shockwave-flash"
    pluginspage="http://www.macromedia.com/go/getflashplayer">
    </embed>
    </object>
    Copy and paste this one in an HTML Snippet... It works for me...
    Regards,
    Cédric

  • Getting error when publish fla file in CS5 environment

    When I publish a "fla" a file in CS5 environment, got following error.
    ComponentShim (Compiled Clip), Line 1 5000: The class 'fl.controls.TextInput' must subclass 'flash.display.SimpleButton' since it is linked to a library symbol of that type.
    Please help with a solution.
    Thanks

    Thanks for your response..
    But didn't get much clarity from your suggestion. Hope you have deleted all button controls / components from fla file and re-create from Library..rt?
    Have any simple way to do this? In my case  around thirty controls in this fla file. So it is very difficult to delete and add the same. When we remove these controls missing th instance name also.
    Please suggest.

  • 404 error when publishing to FTP server.

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."  I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
    A 404 errors means the file is not on the server.
    Checking the connection is just testing the FTP connection.
    I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?
    Do I rename my iWeb file, domain, to index_html?
    No, you don't. The domain file is where iWeb  stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
    Read this : The concept of iWeb Sites
    So if your pages do not load, check for their presence on the server.

  • Java Error When Publishing

    So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
    The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
    I appreciate the help guys!
    -- Rick

    To the original poster, Rick:
    If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory.  Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
    Did you see any warnings about the size of the images you've imported into your project?  Very large images can certianly be one source of problems.
    Here are a few tips for dealing with large images:
    Resize them to be smaller using a another app like Photoshop, before you import into Catalyst.  Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos.  Other images should be < 100 KB (remember, people viewing your site will have to download all this).
    In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
    In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos.  This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
    Hope that helps!
    - Peter

  • WorkFlow Error when publishing

    Hello, 
    I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue? 
    Here is the code it spits out: 
    System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
    at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
    at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
    at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
    at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
    Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
    Thanks,
    Will 

    Hi,
    For your issue, Re-register the workflow service using command:
    Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
    Reopened SharePoint Designer again and test again.
    Here are similar posts, you can use as a reference:
    https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Adobe Captivate 6 Error when publishing

    Help!  I having trouble publishing a training that my employees can view.  When they open the project they are getting the first image here that is essentially blank.  I have attempted to reduce the size and save to different folders etc. but nothing seems to work. 

    Hi there,
    Could you tell me the complete version of Captivate (Help > About Adobe Captivate).  6.0.1.240
    Which version of Adobe Reader or Acrobat are they using?  Adobe Reader XI
    Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end?  I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up.  But, I am not sure if it is viewing for me because I have it on my system.
    Re: Adobe Captivate 6 Error when publishing
    created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412

  • SharePointDesigner - Error when publishing a workflow

    Hi.
    When i´m publishing my workflow, sharepoint designer rises the following exception:
    "Error were found when compiling the workflow. The workflow files were saved but cannot be run." - "Unexpected error on server associating the workflow."
    The workflow is really simple; i used some custom activities (to read details from an attached excel document) and then i have to do many checks and about 12 approvals.
    I have recreated the workflow and it seems that adding the 7th approval creates this error; when publishing with 6 approvals everything is fine.
    My Question: What is the error, where can i find more information regarding this issue, maybe it´s a bug in designer? Are there any known workarounds that can help? I really need so many approvals :-)
    Is there a way to split the workflow in 2 or 3 parts, that can do the "job" of the big one?
    I´m using Sharepoint Server 2010 with the current SPD (-> Microsoft Information Worker VM).
    Thx for help

    I finally found a solution how to solve this issue:
    In the web.config file of the current site collection (where i was publishing my workflow) i have appended a timeoutvalue for my requests:
    Old entry: <httpRuntime maxRequestLength="51200"/>
    New entry: <httpRuntime
    maxRequestLength="51200"
    executionTimeout="300"
    />
    This will give my workflow some more time to publish!
    Source: http://www.manjuke.com/2011/05/fixed-sharepoint-designer-error.html

  • Window error when publishing Muse change, can't pubish page update

    Window error when publishing Muse change, can't pubish page update. Any suggestions?
    It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
    <script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
    "use strict";
    var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
    n.src = "//paypal.adtag.where.com/merchant.js";
    s.parentNode.insertBefore(n, s);
    }(document, "script"));
    </script>

    Window error when publishing Muse change, can't pubish page update. Any suggestions?
    It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
    <script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
    "use strict";
    var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
    n.src = "//paypal.adtag.where.com/merchant.js";
    s.parentNode.insertBefore(n, s);
    }(document, "script"));
    </script>

  • Error in InfoPackage: Error when uploading Flat Files

    Hello Experts,
    I encoutered this error in Info Package when uploading a flat file.
    When i try to click on the "Preview" button, this errors appear:
    "Error 8 when compiling the upload program: Row
      237, message: Data Type / BIC/ CCCBMA1_COCTR2 was found in a newer"
    Please help to advise what is this error about and how to resolve this?

    hi Annie,
    run RSA1 and try again
    Error when compiling the upload program (Message no. RSAR233)
    other similar problem solved by run program(SE38)RS_TRANSTRU_ACTIVATE_ALL and relogon
    A newer version of the data type error when loading
    Flat File Preview error message
    Error when loading from Flat File
    Error message when previewing data in InfoPackage
    hope this helps.

  • Multiple JavaScript errors when opening aspx file in Dreamweaver

    I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

    Hi Steven,
    Not sure if this is related, but can  you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • Error when creating ZIP file (return value 2 when IGS was called)

    Hello All
    I attempted to Schedule a Query to the Portal folders and executes fine.  However when it's scheduled to and email, I am getting this message
    'Error when creating ZIP file (return value 2 when IGS was called)'
    Any ideas?
    Thanks ...BK

    Hello Kai
    Thanks very much for the info.  how would I know what patch the IGS is?
    Thank you.
    Regards..BK

  • Publishing error when publishing one section

    I am publishing my material per module and receive the following error when publishing one of the modules:
    Publishing Activity Log:
    Task
    GMT Training Guide / Creating numbering styles in document
    Path
    /49b77e2d-7666-443e-a2fa-edbfc9aa22b2/Parts/pr.oxmlprint.multi.xml     
    Comment
    Processing project failed
    Ref. #
    -1673847682
    All of the other modules publish with no problems.
    Any assistance in this regard would be much appreciated.
    Thanks,
    Angie

    Did you copy the text in there? Could be the following:
    The problem is related to concept frames. Some concept frames have not regular charachters. Those characters aren't visible in the edit mode. The are only visible if you copy the text of the concept frame to word. In word use the button "display unknow characters". It seemed like they will appear if you copy and paste text in the conceptframes.
    You need to copy the text of the editor to Word. Click on the button "display unknown characters" to see all characters in text (including e.g.enter and spacebar). Remove the strange characters such as small circles. Copy the text and paste it back into the editor.
    Save the editor (and publish again).
    Good luck.

  • When publishing video files in H.264 format, I get the error "No rendered photo exists on disk"

    I want to export images as well as videos (.mov files) by using the Publishing Manager in Lightroom 5.6 under Windows 7, 64 Bit. For this I activated "Include Video Files" in the Publishing Manager and set "Video Format" to "H.264". When publishing, all photos are correctly published. The videos, however, are not published. Instead Lightroom returns the error: "Some export operations were not performed.", "No rendered photo exists on disk" followed by a list of the videos that could not be exported.
    If I select "Original, unedited file" for "Video Format" instead, the videos are published. Also, if I manually export the videos (without using the Publishing functionality), the export works.
    How can I publish videos using the H.264 format?

    Thanks Brett, I'll try to recreate it
    I just tried to export it again but this time to the desktop, not a Sandisk USB, and this time it created 4 different files, one being audio only and when I tried to play/open the others it gave a 'server error' dialogue  window and I couldn't get a screen shot while this was open.

Maybe you are looking for